Creating High-entropy Single Atoms on Transition Disulfides through Substrate-induced Redox Dynamics for Efficient Electrocatalytic Hydrogen Evolution.

The controllable anchoring of multiple metal single-atoms (SAs) into a single support exhibits scientific and technological opportunities,while marrying the concentration-complex multimetallic SAs and high-entropy SAs (HESAs) into one SAC system remains a substantial challenge.Here, we present a substrate-mediated SAs formation strategy to successfully fabricate a library of multimetallic SAs and HESAs on MoS2 and MoSe2 supports, which can precisely control the doping location of SAs. Specially, the contents of SAs can continuously increase until the accessible Mo atoms on TMDs carriers are completely replaced by SAs, thus allowing the of much higher metal contents.In-depth mechanistic study shows that the well-controlled synthesis of multimetallic SAs and HESAs is realized by controlling the reversible redox reaction occurred on the TMDs/TM ion interface.As a proof-of-concept application, a variety of SAs-TMDs were applied to hydrogen evolution reaction. The optimized HESAs-TMDs (Pt,Ru,Rh,Pd,Re-MoSe2) delivers a much higher activity and durability than state of-the-art Pt. Thus, our work will broaden the family of single-atom catalysts and provide a new guideline for the rational design of high-performance single-atom catalysts.

Efficient Neutral H2O2 Electrosynthesis from Favorable Reaction Microenvironments via Porous Carbon Carrier Engineering.

The efficient electrosynthesis of hydrogen peroxide (H2O2) via two-electron oxygen reduction reaction (2e- ORR) in neutral media is undoubtedly a practical route, but the limited comprehension of electrocatalysts has hindered the system advancement. Herein, we present the design of model catalysts comprising mesoporous carbon spheres-supported Pd nanoparticles for H2O2 electrosynthesis at near-zero overpotential with approximately 95% selectivity in a neutral electrolyte. Impressively, the optimized Pd/MCS-8 electrocatalyst in a flow cell device achieves an exceptional H2O2 yield of 15.77 mol gcatalyst-1 h-1, generating a neutral H2O2 solution with an accumulated concentration of 6.43 wt.%, a level sufficiently high for medical disinfection. Finite element simulation and experimental results suggest that mesoporous carbon carriers promote O2 enrichment and localized pH elevation, establishing a favorable microenvironment for 2e- ORR in neutral media. Density functional theory calculations reveal that the robust interaction between Pd nanoparticles and the carbon carriers optimized the adsorption of OOH* at the carbon edge, ensuring high active 2e- process. These findings offer new insights into carbon-loaded electrocatalysts for efficient 2e- ORR in neutral media, emphasizing the role of carrier engineering in constructing favorable microenvironments and synergizing active sites.

Ultrathin High-Entropy Fe-Based Spinel Oxide Nanosheets with Metalloid Band Structures for Efficient Nitrate Reduction toward Ammonia.

Spinel oxides with tunable chemical compositions have emerged as versatile electrocatalysts, however their performance is greatly limited by small surface area and low electron conductivity. Here, ultrathin high-entropy Fe-based spinel oxides nanosheets are rationally designed (i.e., (Co0.2Ni0.2Zn0.2Mg0.2Cu0.2)Fe2O4; denotes A5Fe2O4) in thickness of ≈4.3 nm with large surface area and highly exposed active sites via a modified sol-gel method. Theoretic and experimental results confirm that the bandgap of A5Fe2O4 nanosheets is significantly smaller than that of ordinary Fe-based spinel oxides, realizing the transformation of binary spinel oxide from semiconductors to metalloids. As a result, such A5Fe2O4 nanosheets manifest excellent performance for the nitrate reduction reaction (NO3 -RR) to ammonia (NH3), with a NH3 yield rate of ≈2.1 mmol h-1 cm-2 at -0.5 V versus Reversible hydrogen electrode, outperforming other spinel-based electrocatalysts. Systematic mechanism investigations reveal that the NO3 -RR is mainly occurred on Fe sites, and introducing high-entropy compositions in tetrahedral sites regulates the adsorption strength of N and O-related intermediates on Fe for boosting the NO3 -RR. The above findings offer a high-entropy platform to regulate the bandgap and enhance the electrocatalytic performance of spinel oxides.

Unconventional Synthesis of Hierarchically Twinned Copper as Efficient Electrocatalyst for Nitrate-Ammonia Conversion.

Twin boundary (TB) engineering provides exciting opportunities to tune the performance levels of metal-based electrocatalysts. However, the controllable construction of TB greatly relies on surfactants, blocking active sites, and electron transfer by surfactants. Here, a surfactant-free and facile strategy is proposed for synthesizing copper (Cu) nanocatalysts with dense hierarchical TB networks (HTBs) by the rapid thermal reductions in metastable CuO nanosheets in H2 . As revealed by in situ transmission electron microscopy, the formation of HTBs is associated with the fragmentation of nanosheets in different directions to generate abundant crystal nuclei and subsequently unconventional crystal growth through the collision and coalescence of nuclei. Impressively, the HTBs endow Cu with excellent electrocatalytic performance for direct nitrate-ammonia conversion, superior to that of Cu with a single-oriented TB and without TB. It is discovered that the HTBs induce the formation of compressive strains, thereby creating a synergistic effect of TBs and strains to efficiently tune the binding energies of Cu with nitrogen intermediates (i.e., NO2 *) and thus promote the tandem reaction process of NO3 - -to-NO2 - and subsequent NO2 - -to-NH3 electrocatalysis. This work demonstrates the crucial role of HTBs for boosting electrocatalysis via the synergistic effect of TBs and strains.

Designing Efficient Nitrate Reduction Electrocatalysts by Identifying and Optimizing Active Sites of Co-Based Spinels.

Cobalt-based spinel oxides (i.e., Co3O4) are emerging as low-cost and selective electrocatalysts for the electrochemical nitrate reduction reaction (NO3-RR) to ammonia (NH3), although their activity is still unsatisfactory and the genuine active site is unclear. Here, we discover that the NO3-RR activity of Co3O4 is highly dependent on the geometric location of the Co site, and the NO3-RR prefers to occur at octahedral Co (CoOh) rather than tetrahedral Co (CoTd) sites. Moreover, CoOhO6 is electrochemically transformed to CoOhO5 along with the formation of O vacancies (Ov) during the process of NO3-RR. Both experimental and theoretic results reveal that in situ generated CoOhO5-Ov configuration is the genuine active site for the NO3-RR. To further enhance the activity of CoOh sites, we replace inert CoTd with different contents of Cu2+ cations, and a volcano-shape correlation between NO3-RR activity and electronic structures of CoOh is observed. Impressively, in 1.0 M KOH, (Cu0.6Co0.4)Co2O4 with optimized CoOh sites achieves a maximum NH3 Faradaic efficiency of 96.5% with an ultrahigh NH3 rate of 1.09 mmol h-1 cm-2 at -0.45 V vs reversible hydrogen electrode, outperforming most of other reported nonprecious metal-based electrocatalysts. Clearly, this work paves new pathways for boosting the NO3-RR activity of Co-based spinels by tuning local electronic structures of CoOh sites.

Constructing Ultrastable Metallo-Cages via In Situ Deprotonation/Oxidation of Dynamic Supramolecular Assemblies.

Coordination-driven self-assembly enables the spontaneous construction of metallo-supramolecules with high precision, facilitated by dynamic and reversible metal-ligand interactions. The dynamic nature of coordination, however, results in structural lability in many metallo-supramolecular assembly systems. Consequently, it remains a formidable challenge to achieve self-assembly reversibility and structural stability simultaneously in metallo-supramolecular systems. To tackle this issue, herein, we incorporate an acid-/base-responsive tridentate ligand into multitopic building blocks to precisely construct a series of metallo-supramolecular cages through coordination-driven self-assembly. These dynamic cagelike assemblies can be transformed to their static states through mild in situ deprotonation/oxidation, leading to ultrastable skeletons that can withstand high temperatures, metal ion chelators, and strong acid/base conditions. This in situ transformation provides a reliable and powerful approach to manipulate the kinetic features and stability of metallo-supramolecules and allows for modulation of encapsulation and release behaviors of metallo-cages when utilizing nanoscale quantum dots (QDs) as guest molecules.

Building Atomic Scale and Dense Fe─N4 Edge Sites of Highly Efficient Fe─N─C Oxygen Reduction Catalysts Using a Sacrificial Bimetallic Pyrolysis Strategy.

Replacing high-cost and scarce platinum (Pt) with transition metal and nitrogen co-doped carbon (M/N/C, M = Fe, Co, Mn, and so on) catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells has largely been impeded by the unsatisfactory ORR activity of M/N/C due to the low site utilization and inferior intrinsic activity of the M─N4 active center. Here, these limits are overcome by using a sacrificial bimetallic pyrolysis strategy to synthesize Fe─N─C catalyst by implanting the Cd ions in the backbone of ZIF-8, leading to exposure of inaccessible FeN4 edge sites (that is, increasing active site density (SD)) and high fast mass transport at the catalyst layer of cathode. As a result, the final obtained Fe(Cd)─N─C catalyst has an active site density of 33.01 µmol g-1 (with 33.01% site utilization) over 5.8 times higher than that of Fe─N─C catalyst. Specially, the optimal catalyst delivers a high ORR performance with a half-wave potential of 0.837 (vs RHE) in a 0.1 m HClO4 electrolyte, which surpasses most of Fe-based catalysts.

Unlocking the Transition of Electrochemical Water Oxidation Mechanism Induced by Heteroatom Doping.

Heteroatom doping has emerged as a highly effective strategy to enhance the activity of metal-based electrocatalysts toward the oxygen evolution reaction (OER). It is widely accepted that the doping does not switch the OER mechanism from the adsorbate evolution mechanism (AEM) to the lattice-oxygen-mediated mechanism (LOM), and the enhanced activity is attributed to the optimized binding energies toward oxygen intermediates. However, this seems inconsistent with the fact that the overpotential of doped OER electrocatalysts (<300 mV) is considerably smaller than the limit of AEM (>370 mV). To determine the origin of this inconsistency, we select phosphorus (P)-doped nickel-iron mixed oxides as the model electrocatalysts and observe that the doping enhances the covalency of the metal-oxygen bonds to drive the OER pathway transition from the AEM to the LOM, thereby breaking the adsorption linear relation between *OH and *OOH in the AEM. Consequently, the obtained P-doped oxides display a small overpotential of 237 mV at 10 mA cm-2 . Beyond P, the similar pathway transition is also observed on the sulfur doping. These findings offer new insights into the substantially enhanced OER activity originating from heteroatom doping.

Revealing the role of hydrogen bond coupling structure for enhanced performance of the solid-state electrolyte.

Achieving practical applications of PEO-based composite solid electrolyte (CPE) batteries requires the precise design of filler structures at the molecular level to form stable composite interfacial phases, which in turn improve the conductivity of Li+ and inhibit the nucleation growth of lithium dendrites. Some functional fillers suffer from severe agglomeration due to poor compatibility with the polymer base or grain boundary migration, resulting in limited improvement in cell performance. In this paper, ILs@KAP1 is reported as a filler to enhance the performance of PEO-based batteries. Thereinto, the hypercrosslinked phosphorus ligand polymer-containing KAP1, designed at the molecular level, has an abundant porous structure, hydrogen bonding network, and a rigid skeleton structure of benzene rings. These can be used both to improve the flammability with PEO-based and to reduce the crystallinity of the polymer electrolyte. Ionic liquids (ILs) are encapsulated in the nanochannels of KAP1, and thus a 3D Li+ conducting framework could be formed. In this case, it could not only facilitate the wettability of the contact interface with the electrode, significantly promoting its compatibility and providing a fast Li+ transport path, but also facilitate the formation of LiF, Li3N and Li2O rich SEI components, further fostering the uniform deposition/exfoliation of lithium. The LFP||CPE||Li battery assembled with ILs@KAP1-PEO-CPE has a high initial discharge specific capacity about 156 mAh/g at 1C and a remaining capacity about 121.8 mAh/g after 300 cycles (capacity retention of 78.07%).

Lattice Strain Engineering of Ni2 P Enables Efficient Catalytic Hydrazine Oxidation-Assisted Hydrogen Production.

Hydrazine-assisted water electrolysis provides new opportunities to enable energy-saving hydrogen production while solving the issue of hydrazine pollution. Here, the synthesis of compressively strained Ni2 P as a bifunctional electrocatalyst for boosting both the anodic hydrazine oxidation reaction (HzOR) and cathodic hydrogen evolution reaction (HER) is reported. Different from a multistep synthetic method that induces lattice strain by creating core-shell structures, a facile strategy is developed to tune the strain of Ni2 P via dual-cation co-doping. The obtained Ni2 P with a compressive strain of -3.62% exhibits significantly enhanced activity for both the HzOR and HER than counterparts with tensile strain and without strain. Consequently, the optimized Ni2 P delivers current densities of 10 and 100 mA cm-2 at small cell voltages of 0.16 and 0.39 V for hydrazine-assisted water electrolysis, respectively. Density functional theory (DFT) calculations reveal that the compressive strain promotes water dissociation and concurrently tunes the adsorption strength of hydrogen intermediates, thereby facilitating the HER process on Ni2 P. As for the HzOR, the compressive strain reduces the energy barrier of the potential-determining step for the dehydrogenation of *N2 H4 to *N2 H3 . Clearly, this work paves a facile pathway to the synthesis of lattice-strained electrocatalysts via the dual-cation co-doping.

Amorphous NiFe Oxide-based Nanoreactors for Efficient Electrocatalytic Water Oxidation.

Synergy engineering is an important way to enhance the kinetic activity of oxygen-evolution-reaction (OER) electrocatalysts. Here, we fabricated NiFe amorphous nanoreactor (NiFe-ANR) oxide as OER electrocatalysts via a mild self-catalytic reaction. Firstly, the amorphousness helps transform NiFe-ANR into highly active hydroxyhydroxides, and its many fine-grain boundaries increase active sites. More importantly, as proved by experiments and finite element analysis, the nanoreactor structure alters the spatial curvature and the mass transfer over the catalyst, thereby enriching OH- in the catalyst surface and inner part. Thus, the catalyst with the structure of amorphous nanoreactors gained excellent activity, far superior to the NiFe catalyst with the structure of crystalline nanoreactor or amorphous non-nanoreactor. This work provides new insights into the applications and mechanisms of amorphousness and nanoreactors, embodying the "1+1>2" synergy of crystalline state and morphology.

Metallo-Supramolecular Hexagonal Wreath with Four Switchable States Based on a pH-Responsive Tridentate Ligand.

In biological systems, many biomacromolecules (e.g., heme proteins) are capable of switching their states reversibly in response to external stimuli, endowing these natural architectures with a high level of diversity and functionality. Although tremendous efforts have been made to advance the complexity of artificial supramolecules, it remains a challenge to construct metallo-supramolecular systems that can carry out reversible interconversion among multiple states. Here, a pH-responsive tridentate ligand, 2,6-di(1H-imidazole-2-yl)pyridine (H2DAP), is incorporated into the multitopic building block for precise construction of giant metallo-supramolecular hexagonal wreaths with three metal ions, i.e., Fe(II), Co(II), and Ni(II), through coordination-driven self-assembly. In particular, a Co-linked wreath enables in situ reversible interconversion among four states in response to pH and oxidant/reductant with highly efficient conversion without losing structural integrity. During the state interconversion cycles, the physical properties of the assembled constructs are finely tuned, including the charge states of the backbone, valency of metal ions, and paramagnetic/diamagnetic features of complexes. Such discrete wreath structures with a charge-switchable backbone further facilitate layer-by-layer assembly of metallo-supramolecules on the substrate.

Engineering Energy Level of FeN4 Sites via Dual-Atom Site Construction Toward Efficient Oxygen Reduction.

Single-atom catalysts based on metal-N4 moieties and embedded in a graphite matrix (defined as MNC) are promising for oxygen reduction reaction (ORR). However, the performance of MNC catalysts is still far from satisfactory due to their imperfect adsorption energy to oxygen species. Herein, single-atom FeNC is leveraged as a model system and report an adjacent Ru-N4 moiety modulation effect to optimize the catalyst's electronic configuration and ORR performance. Theoretical simulations and physical characterizations reveal that the incorporation of Ru-N4 sites as the modulator can alter the d-band electronic energy of Fe center to weaken the FeO binding affinity, thus resulting in the lower adsorption energy of ORR intermediates at Fe sites. Thanks to the synergetic effects of neighboring Fe and Ru single-atom pairs, the FeN4 /RuN4 catalyst exhibits a half-wave potential of 0.958 V and negligible activity degradation after 10 000 cycles in 0.1 m KOH. Metal-air batteries using this catalyst in the cathode side exhibit a high power density of 219.5 mW cm-2 and excellent cycling stability for over 2370 h, outperforming the state-of-the-art catalysts.

Non-equilibrium Nanoassemblies Constructed by Confined Coordination on a Polymer Chain.

Biological systems employ non-equilibrium self-assembly to create ordered nanoarchitectures with sophisticated functions. However, it is challenging to construct artificial non-equilibrium nanoassemblies due to lack of control over assembly dynamics and kinetics. Herein, we design a series of linear polymers with different side groups for further coordination-driven self-assembly based on shape-complementarity. Such a design introduces a main-chain confinement which effectively slows down the assembly process of side groups, thus allowing us to monitor the real-time evolution of lychee-like nanostructures. The function related to the non-equilibrium nature is further explored by performing photothermal conversion study. The ability to observe and capture non-equilibrium states in this supramolecular system will enhance our understanding of the thermodynamic and kinetic features as well as functions of living systems.

Oxidation State Modulation of Bimetallic Tin-Copper Oxide Nanotubes for Selective CO2 Electroreduction to Formate.

In this work, the oxidation state of Sn and Cu active sites for CO2 electroreduction via constructing a Sn-Cun bimetallic oxide composite with a nanotube structure (SnCu-CNS) is successfully modulated. Compared to a single SnO2 or CuOx component, the SnCu-CNS composite holds reinforced electronegativity to generate unique extra Snδ+ centers and higher CuO centers with enhanced oxidation effect. Based on density functional theory calculations, the enlarged energy difference between Snδ+ /CuO centers and the reactants accelerates the electron transfer and decreases the energy barrier for the key intermediates to gain higher formate selectivity. Furthermore, the hollow structure and abundant micropores of SnCu-CNS are also conducive to the reactant transport and availability of active sites during CO2 electroreduction. In a conventional H-type cell, SnCu-CNS catalyst exhibits a maximum 95.1% faradaic efficiency for formate production. Switching to a flow cell configuration, SnCu-CNS can further deliver partial current densities exceeding 200 mA cm-2 and over 90% faradaic efficiencies for the formate, superior to most of the reported Sn-based electrocatalysts. This strategy of electronic modulation and morphology engineering in bimetallic oxides can have wide applications to raise electrocatalytic performance.

Pomegranate-Inspired Graphene Parcel Enables High-Performance Dendrite-Free Lithium Metal Anodes.

Uncontrolled lithium dendrites seriously hinder the commercialization of lithium metal batteries in comparison to the durable lithium-ion batteries. Herein, inspired by squashy pomegranate structure, a novel loading strategy of metallic lithium (Li) is introduced to construct dendrite-free Li metal anodes through porous reduced graphene oxide/Au (PRGO/Au) composite microrods (MRs) as unique storage parcels. The abundant internal voids and robust host structure are capable of achieving high mass loading of Li metal and effectively alleviating the conceivable volume change during cycling, accompanied by the preferential selective plating/stripping of Li inside the graphene-based MRs with the embedded Au nanonuclei. As a result, the obtained PRGO/Au-Li anodes deliver a long-lifespan stable cycling up to 600 h with a high specific capacity of ≈2140 mA h g-1 and voltage hysteresis as low as 20 mV in the absence of dendrites. The assembled full cells exhibit excellent rate capability and cycling stability. This work provides an alternative strategy to construct advanced high-energy-density lithium batteries via the unique 1D bioinspired graphene-based packaging strategy.

Superbase and Hydrophobic Ionic Liquid Confined within Ni Foams as a Free-Standing Catalyst for CO2 Electroreduction.

Access to high-performance and cost-effective catalyst materials is one of the crucial preconditions for the industrial application of electrochemical CO2 reduction (ECR). In this work, a facile and simple strategy is proposed for the construction of a free-standing electrocatalyst via confining a superbase and hydrophobic ionic liquid (IL, [P66614][triz]) into Ni foam pores, denoted as [P66614][triz]@Ni foam. These ILs can modulate the surface of Ni foam and create a microenvironment with high CO2 concentration around the electrode/electrolyte interface, which successfully suppresses the hydrogen evolution reaction (HER) of Ni foam. Consequently, the synthesized [P66614][triz]@Ni foam sample can obtain a CO product with 63% Faradaic efficiency from the ECR procedure, while no detectable CO can be found on pristine Ni foam. Owing to the superbase IL, the valency of Ni species retains Ni(I)/Ni(0) during electrolysis. Furthermore, the strikingly high CO2 capacity by [P66614][Triz] (0.91 mol CO2 per mole of IL) offers a high CO2 local concentration in the reaction region. Theoretical calculations indicated that the neutral CO2 molecule turned to be negatively charged with -0.546 e and changed into a bent geometry, thus rendering CO2 activation and reduction in a low-energy pathway. This study provides a new method of electrode interface modification for the design of efficient ECR catalysts.

A Multifunctional Anti-Proton Electrolyte for High-Rate and Super-Stable Aqueous Zn-Vanadium Oxide Battery.

Large volumetric expansion of cathode hosts and sluggish transport kinetics in the cathode-electrolyte interface, as well as dendrite growth and hydrogen evolution at Zn anode side are considered as the system problems that cause the electrochemical failure of aqueous Zn-vanadium oxide battery. In this work, a multifunctional anti-proton electrolyte was proposed to synchronously solve all those issues. Theoretical and experimental studies confirm that PEG 400 additive can regulate the Zn2+ solvation structure and inhibit the ionization of free water molecules of the electrolyte. Then, smaller lattice expansion of vanadium oxide hosts and less associated by-product formation can be realized by using such electrolyte. Besides, such electrolyte is also beneficial to guide the uniform Zn deposition and suppress the side reaction of hydrogen evolution. Owing to the integrated synergetic modification, a high-rate and ultrastable aqueous Zn-V2O3/C battery can be constructed, which can remain a specific capacity of 222.8 mAh g-1 after 6000 cycles at 5 A g-1, and 121.8 mAh g-1 even after 18,000 cycles at 20 A g-1, respectively. Such "all-in-one" solution based on the electrolyte design provides a new strategy for developing high-performance aqueous Zn-ion battery.

Subnanometric Ru clusters with upshifted D band center improve performance for alkaline hydrogen evolution reaction.

Subnanometric metal clusters usually have unique electronic structures and may display electrocatalytic performance distinctive from single atoms (SAs) and larger nanoparticles (NPs). However, the electrocatalytic performance of clusters, especially the size-activity relationship at the sub-nanoscale, is largely unexplored. Here, we synthesize a series of Ru nanocrystals from single atoms, subnanometric clusters to larger nanoparticles, aiming at investigating the size-dependent activity of hydrogen evolution in alkaline media. It is found that the d band center of Ru downshifts in a nearly linear relationship with the increase of diameter, and the subnanometric Ru clusters with d band center closer to Femi level display a stronger water dissociation ability and thus superior hydrogen evolution activity than SAs and larger nanoparticles. Benefiting from the high metal utilization and strong water dissociation ability, the Ru clusters manifest an ultrahigh turnover frequency of 43.3 s-1 at the overpotential of 100 mV, 36.1-fold larger than the commercial Pt/C.

Breaking the Limitation of Elevated Coulomb Interaction in Crystalline Carbon Nitride for Visible and Near-Infrared Light Photoactivity.

Most near-infrared (NIR) light-responsive photocatalysts inevitably suffer from low charge separation due to the elevated Coulomb interaction between electrons and holes. Here, an n-type doping strategy of alkaline earth metal ions is proposed in crystalline K+ implanted polymeric carbon nitride (KCN) for visible and NIR photoactivity. The n-type doping significantly increases the electron densities and activates the n→π* electron transitions, producing NIR light absorption. In addition, the more localized valence band (VB) and the regulation of carrier effective mass and band decomposed charge density, as well as the improved conductivity by 1-2 orders of magnitude facilitate the charge transfer and separation. The proposed n-type doping strategy improves the carrier mobility and conductivity, activates the n→π* electron transitions for NIR light absorption, and breaks the limitation of poor charge separation caused by the elevated Coulomb interaction.