ABSTRACT
Cellulose nanofiber (CNF) has been widely used as a flexible and lightweight polymer matrix for electromagnetic shielding and thermally conductive composite films because of its excellent mechanical strength, environmental performance, and low cost. However, the lack of flame retardancy seriously hinders its further application. Herein, renewable and biomass-sourced l-arginine (AR) was used to surface-modify ammonium polyphosphate (APP) and an environmentally friendly biobased flame retardant was synthesized by the coordination of zinc sulfate heptahydrate (ZnSO4·7H2O), which was named AAZ. AAZ was deposited on the surface of CNF by electrostatic adsorption and Zn2+ complexation. The biobased compatibilizer Triton X-100 was employed to assist the exfoliation of graphene nanoplatelets (GNPs) and their dispersion in the CNF matrix. Due to the formation of a dense lamellar layer resembling a shell structure, the CNF/GNPs composite films with a tensile strength of 52 MPa were obtained via vacuum-assisted filtration. Because the phosphorus-containing group produces a protective layer of PxOy compound and promotes the formation of a carbon layer by CNF and the combustion releases ammonia gas, the fire-resistant performance of the composite films was greatly improved. Compared with the pure CNF film, the composite film exhibits 33% reduction in PHRR value and 40% reduction in THR. In addition, the CNF/GNPs composite film with 20 wt % GNPs possessed high conductivity (2079.2 S/m) and electromagnetic interference (EMI) shielding effectiveness (37 dB). The ultrathin CNF/GNPs composite films have excellent potential for use as efficient flame retardant and EMI shielding materials.
ABSTRACT
At the end of 2022, a huge tide of SARS-CoV-2 infection mainly Omicron BA.4/5 developed in China. Multiple myeloma (MM) patients suffered cancer deterioration and mortality from COVID-19, yet profound analyses of Omicron variants-induced immunity function are scarce. We presented a longitudinal study in 218 MM patients and 73 healthy controls (HCs), reporting the prognostic factors and dynamic humoral and cellular immune responses. Neutralizing antibody and interferon γ ELISpot assay of SARS-CoV-2 was tested at three time points: 2-4, 8-10, and 14-16 weeks after infections. Our data showed older age, active MM, relapsed/refractory MM (R/RMM), immunotherapy, comorbidity, and non-vaccination were risk factors associated with hospitalization. Severe humoral immunity impairment within 2-4 weeks was especially seen in patients with unvaccinated, older age, immunotherapy, R/RMM and comorbidities, while T-cell response was relatively intact. Although antibodies of Omicron variants reached positive levels in MM patients at 8-10 weeks, half lost effective antibody protection at 14-16 weeks. However, most seronegative patients (76.2% at 2-4 weeks, 83.3% at 8-10 weeks) could develop effective T-cell response. Notably, the inactivated wild-type vaccinated patients exhibited weaker humoral and cellular immunity only at 2-4 weeks, escalating to similar levels as those in HCs later. Our findings indicate impairment of humoral immunity at acute-phase after infection is the major factor correlated with hospitalization. One-month suspension of immune therapy is suggested to prevent serious infection. These results confirm the value of inactivated vaccine, but indicate the need for additional booster at 14-16 weeks after infection for high-risk MM population.
Subject(s)
Antibodies, Neutralizing , Antibodies, Viral , COVID-19 , Immunity, Humoral , Multiple Myeloma , SARS-CoV-2 , Humans , COVID-19/immunology , COVID-19/virology , COVID-19/epidemiology , Multiple Myeloma/immunology , SARS-CoV-2/immunology , Male , Middle Aged , Female , Immunity, Humoral/immunology , Aged , Antibodies, Neutralizing/immunology , Antibodies, Neutralizing/blood , Antibodies, Viral/blood , Antibodies, Viral/immunology , Prognosis , Longitudinal Studies , China/epidemiology , Adult , Aged, 80 and over , Immunity, CellularABSTRACT
Radiomic features have demonstrated reliable outcomes in tumor grading and detecting precancerous lesions in medical imaging analysis. However, the repeatability and stability of these features have faced criticism. In this study, we aim to enhance the repeatability and stability of radiomic features by introducing a novel CT-responsive hydrogel material. The newly developed CT-responsive hydrogel, mineralized by in situ metal ions, exhibits exceptional repeatability, stability, and uniformity. Moreover, by adjusting the concentration of metal ions, it achieves remarkable CT similarity comparable to that of human organs on CT scans. To create a phantom, the hydrogel was molded into a universal model, displaying controllable CT values ranging from 53 HU to 58 HU, akin to human liver tissue. Subsequently, 1218 radiomic features were extracted from the CT-responsive hydrogel organ simulation phantom. Impressively, 85-97.2% of the extracted features exhibited good repeatability and stability during coefficient of variability analysis. This finding emphasizes the potential of CT-responsive hydrogel in consistently extracting the same features, providing a novel approach to address the issue of repeatability in radiomic features.
Subject(s)
Hydrogels , Image Processing, Computer-Assisted , Humans , Image Processing, Computer-Assisted/methods , Tomography, X-Ray Computed/methods , Phantoms, Imaging , IonsABSTRACT
The zeta potential of nanoparticles impacts their distribution and metabolism in the body as well as their interaction with medications of varying charges, hence altering therapeutic efficacy and safety. In this paper, the external charges of liposomes were regulated by utilizing a simple and economical method based on competition for protons of cationic chitosan (CS) and anion hyaluronic acid (HA). The charge regulation of a liposomal membrane is generally accomplished by adjusting the ratio of charged lipids within a liposome (e.g., cationic DOTAP or anionic DOPS), the stability of which was maintained by the coating materials of cationic chitosan (CS) or anion hyaluronic acid (HA). A series of nanoparticles could respond to pH-stimulation with adjustable surface charge. Moreover, the sizes of liposomes coated with CS and HA remain within a narrow range. In vitro cytotoxicity tests revealed that the nanocarriers were safe, and the nanoparticles containing antitumor medicines were efficient in tumor therapy. Considering liposomes with different external surface charges could be aimed at diverse therapy purposes. The strategies for regulating liposomal surface charges with high encapsulation rates and certain release cycles reported here could provide a versatile platform as carriers for the delivery of drugs and other macromolecules into human bodies.
Subject(s)
Chitosan , Liposomes , Humans , Hyaluronic Acid , Hydrogen-Ion Concentration , AnionsABSTRACT
All-solid-state sodium-ion batteries have the potential to improve safety and mitigate the cost bottlenecks of the current lithium-ion battery system if a high-performance electrolyte with cost advantages can be easily synthesized. In this study, a one-step dehydrogenation-assisted strategy to synthesize the novel thio-borohydride (Na-B-H-S) electrolyte is proposed, in which both raw material cost and preparation temperature are significantly reduced. By using sodium borohydride (NaBH4 ) instead of B as a starting material, B atoms can be readily released from NaBH4 with much less energy and thus became more available to generate thio-borohydride. The synthesized Na-B-H-S (NaBH4 /Na-B-S) electrolyte exhibits excellent compatibility with current cathode materials, including FeF3 (1.0-4.5 V), Na3 V2 (PO4 )3 (2.0-4.0 V), and S (1.2-2.8 V). This novel Na-B-H-S electrolyte will take a place in mainstream electrolytes because of its advantages in preparation, cost, and compatibility with various cathode materials.
ABSTRACT
Incorporating bio-based flame retardants into polylactic acid (PLLA) to improve flame retardancy has always been the focus of research, but the improvement of flame retardancy is usually at the expense of mechanical properties. How to successfully balanced the material's mechanical and combustion properties has puzzled many scholars. Herein, ammonium polyphosphate (APP) and chitosan (CS) were used as acid source and carbon source respectively. Biological flame retardant APP@CS was designed and synthesized by electrostatic self-assembly method. In addition, toughened PLLA composites were prepared by reactive blending with the in-situ formed polyurethane (PU) as toughening phase. The results show that the CS shell not only reduces the hydrophilicity of the flame retardant, but also has good flame retardant property because of its excellent char forming property. The addition of 10 phr APP@CS can endow PLLA/crosslinked PU (CPU) with UL-94 V-2 rating and a LOI value of 24.9 %. Interestingly, CS shell participates in the in-situ reaction, which improves the mechanical properties of the composite with elongation at break of 74 %, which is higher than that of sample doped with the same amount of APP. This work provides guidance for the high performance modification of PLLA and is expected to expand the practical application range.
ABSTRACT
The gel modulus, a key parameter for gel materials, is traditionally determined by cumbersome rheometer. Recently, probe technologies occur to meet the requirements of in situ determination. Till now, in situ and quantitatively testing of gel materials with unabridged structure informations still remains a challenge. Here, we provide a facile, in situ approach to determine the gel modulus, by timing the aggregation of a doped fluorescence probe. The probe shows green emission during aggregation and shifts to blue once it forms aggregates. The higher modulus of the gel, the longer probe's aggregation time. Furthermore, a quantitative correlation of gel modulus with the aggregation time is established. The in situ method not only facilitates the scientific researches in the field of gels, but also provides a new approach for spatiotemporal materials.
ABSTRACT
Herein, thioether bonds in the peripheral groups of chiral dendrimer that could activate the transformation between J- and H-aggregation in π-systems and caused controllable chiral inversion are described. Furthermore, owing to the close-knit per-aggregation of dendrimers impeding the transfer of inherent molecular chirality, the inversed chirality could be memorized and transferred from oligomers to nano-helices during self-assembly.
ABSTRACT
The effect of different plasticizers on thermal stability, transparency, and migration resistance of the PVC stabilized with zinc arginine [Zn(Arg)2] was investigated. The thermal stability, migration resistance, and transparency of PVC with tributyl citrate (TBC) were better than PVC with dioctyl phthalate (DOP) characterized by oven aging method, migration test, and near infrared-visible-ultraviolet spectrophotometer. At the same time, the longer the carbon chain in citric acid esters, the better the thermal stability and transparency of PVC sample. The hydroxyl group in citric acid esters is helpful to improve the thermal stability of PVC samples. However, the elongation at break and Tg value of PVC containing DOP were very close to those of PVC containing TBC. The calculation results of Hansen solubility parameters also illustrated that DOP had better compatibility with PVC than TBC. Therefore, the excellent transparency and thermal stability of TBC plasticized PVC were attributed to the good compatibility between TBC and Zn(Arg)2, which was verified by the solubility test. Lastly, the mixture of dioctyl terephthalate (DOTP) and TBC was used as plasticizers for Zn(Arg)2 stabilized PVC. When the ratio of TBC and DOTP was 1:1, the transparency, thermal stability, and migration resistance of Zn(Arg)2 stabilized PVC samples were better than those of PVC plasticized by DOP or TBC alone. The mechanism was that the compatibility between Zn(Arg)2 and PVC was greatly improved by the synergetic effect of TBC and DOTP, resulting in the improvement of thermal stability, migration resistance, and transparency of PVC samples.
ABSTRACT
Objective: To study the effects of psychological nursing intervention on anxiety, depression, and life events in puerperal women with fetal abnormalities. Methods: From January 2020 to January 2022, eighty women with abnormal fetal induction and puerperium-treated were selected in our hospital as the subjects. The research group (n = 40) and control group (n = 40) were arbitrarily selected from 80 women with abnormal fetal induction and puerperium. The research group was given psychological nursing intervention based on routine nursing, and the control cases were given routine nursing. The scores of Generalized Anxiety Scale (GAD-7), Patient Health Questionnaire (PHQ-9), Event Impact Scale (IES-R), Life Events Scale (LES), and Newcastle Nursing Satisfaction Scale (NSNS) were studied before nursing and 4 weeks after discharge. Results: Four weeks after discharge, the score of GAD-7 in the research group was lower, and the difference was statistically significant (P < 0.05). The score of PHQ-9 in the research group was lower, and the difference was statistically significant (P < 0.05). The IES-R score of the research group was lower, and the difference was statistically significant (P < 0.05). The LES score of the research group was lower, and the difference was statistically significant (P < 0.05). And the NSNS score of the research group was higher, and the difference was statistically significant (P < 0.05). Conclusion: The value of psychological care interventions in women with abnormally induced labor is more remarkable, contributing to the reduction of anxiety and depression and increasing the satisfaction of care for women with abnormally induced labor.
Subject(s)
Anxiety , Depression , Female , Fetus , Humans , Labor, Induced , Postpartum Period , Pregnancy , Quality of Life/psychologyABSTRACT
Different from the traditional concept that binary photonic crystals can only reproduce mixed colors due to the simple superposition of the photonic band gaps, precisely addressable "true colors" obtained from volume fraction deviation of binary photonic crystals with metastable structures are reported here. Inspired by the mussels' adhesion and longhorn beetles' photonic scales, a binary metastable amorphous photonic crystal was obtained by enhancing the driving forces and customizing the surface roughness of building blocks to regulate the thermodynamic and dynamic factors simultaneously. By controlling the volume fraction of two building blocks, the tunable photonic bandgap varies linearly in the visible region. Furthermore, the "true violet" that cannot be obtained by conventional color mixing is reproduced with the particular ultraviolet characteristics of red photonic pigment's metastable structures, which complement the palette effect of "true colors". Meanwhile, due to the self-adhesion and post-modification of building blocks, the stability of photonic pigments is further improved. The binary photonic pigments not only solve the dilemma of mixed colors, but also realize the tunability and multiplicity of "true colors", offering a new choice for the color palette of the world.
Subject(s)
Coleoptera , Photons , Animals , Optics and Photonics , PigmentationABSTRACT
Although more than 2.2 million cranial repair surgical operations are performed every year, orthopedic doctors still dream of excellent artificial repair materials with suitable strength, on-site and on-demand fast-shaping properties, and bone induction properties. However, fast-shaping and high-strength properties seem to contradict each other, and even mineralized hydrogels, which already have excellent strength and bone induction properties, are not ideal candidates, since they lack the plasticity needed for complex craniofacial surface use during the essential mechanism of the process of the cleavage of inorganic ions, nucleation, and growth. Here, we report a novel mineralized hydrogel based on dispersing mineral ions prior to use and then inducing inorganic formation by decreasing the temperature, which endows the hydrogels with the characteristics of precise customization at an appropriate degree of mineralization and simultaneously achieves suitable mechanical properties and sufficient calcium supply for bone regeneration. Additionally, the calcium ion content in the water of the matrix will change with the temperature, and, thus, the conductivity of the mineralized hydrogels will change accordingly. This implements the ability to warn of inflammation in a timely fashion in the form of a temperature sensor. Therefore, this temperature-responsive hydrogel effectively achieves the aim of versatile material design.
Subject(s)
Calcium , Hydrogels , Bone Regeneration , Bone and Bones , Hydrogels/pharmacology , MineralsABSTRACT
Nanofibrillated cellulose (NFC) film has received tremendous attention due to its excellent electrical insulation, which shows great application prospects in the field of electronic devices. However, the low efficient heat dissipation of NFC film largely limits its use in advanced applications. In this work, the reduced graphene oxide hybrid fillers loaded alumina (Al2O3) particles with different sizes were synthesized by different drying methods, and then they were mixed with NFC to prepare a series of NFC-based composite films. The effect of Al2O3particle sizes on the thermal conductivity of NFC-based composite films was studied. The results showed that the surface areas of l-Al2O3particles were smaller than that of s-Al2O3particles, resulting in the smaller interface thermal resistance and superior thermal conductivity of the film containing l-Al2O3particles. The NFC-based composite films showed great potential for applications in thermal management by adjusting the particle size of fillers.
ABSTRACT
Increasing evidence reveals that breast cancer stem cells (BCSCs) subtypes with distinct properties are regulated by their abnormal metabolic changes; however, the specific molecular mechanism and its relationship with tumor microenvironment (TME) are not clear. In this study, we explored the mechanism of lactate dehydrogenase A (LDHA), a crucial glycolytic enzyme, in maintaining cancer stemness and BCSCs plasticity, and promoting the interaction of BCSCs with tumor associated macrophages (TAMs). Firstly, the expression of LDHA in breast cancer tissues was much higher than that in adjacent tissues and correlated with the clinical progression and prognosis of breast cancer patients based on The Cancer Genome Atlas (TCGA) data set. Moreover, the orthotopic tumor growth and pulmonary metastasis were remarkable inhibited in mice inoculated with 4T1-shLdha cells. Secondly, the properties of cancer stemness were significantly suppressed in MDA-MB-231-shLDHA or A549-shLDHA cancer cells, including the decrease of ALDH+ cells proportion, the repression of sphere formation and cellular migration, and the reduction of stemness genes (SOX2, OCT4, and NANOG) expression. However, the proportion of ALDH+ cells (epithelial-like BCSCs, E-BCSCs) was increased and the proportion of CD44+ CD24- cells (mesenchyme-like BCSCs, M-BCSCs) was decreased after LDHA silencing, suggesting a regulatory role of LDHA in E-BCSCs/M-BCSCs transformation in mouse breast cancer cells. Thirdly, the expression of epithelial marker E-cadherin, proved to interact with LDHA, was obviously increased in LDHA-silencing cancer cells. The recruitment of TAMs and the secretion of CCL2 were dramatically reduced after LDHA was knocked down in vitro and in vivo. Taken together, LDHA mediates a vicious cycle of mutual promotion between BCSCs plasticity and TAMs infiltration, which may provide an effective treatment strategy by targeting LDHA for breast cancer patients.
ABSTRACT
Analyzing the assembly patterns of multicomponent gelators is important for understanding their assembly rules and precisely manipulating their molecular structure to form a tailored multifunctional supramolecular gel. But the fast in situ recognition technology to infer whether the assembly pattern is a self-sorting or co-assembled system is lacking. For developing a widely applicable stable and sensitive fluorescent probe to infer assembly patterns, we design and synthesize the multiple peripheral functional group tetraphenylethene (TPE) modified well-defined cubic core polyhedral oligomeric silsesquioxane (POSS) three-dimensional (3D) dendrimer. POSS-TPE can form a thermally stable self-assembly structure after being incubated in a wide temperature range, and the resultant special thermally stable photoluminescence (PL) intensity provides a novel possibility of fluorescent probe. Then, POSS-TPE sensitively catches the mechanical stress changes of the confined space provided by the gel networks and infers the assembly patterns by comparing the mechanical stress change laws of a self-sorting or co-assembled system. So, the application of fluorescent probe in assembly fields is enlarged in this research. In the future, this widely applicable fluorescent probe will be helpful to develop supramolecular assembly materials consisting of multicomponent gels.
ABSTRACT
Contrary to the popular belief that multicomponent assembly systems will theoretically co-assemble under the same type of driving forces, two distinct assembly modes from a system composed of two chemically similar supramolecules were demonstrated in this work. Although with exactly the same driving forces, molecule-level self-sorting unexpectedly occurred in this two-component system made of polyhedral oligomeric silsesquioxane (POSS) core-based supramolecules with one and eight lysine derivative arms. From the experiments, it was concluded that instead of driving force types, driving force counterpoise plays a vital role here, which we called "identity card hypothesis". The hypothesis suggests that two highly similar components show high affinity for the same molecules through the differentiated "identity card"-like balance of driving forces induced by the difference in the molecular spatial shape, which has never been reported before.
ABSTRACT
Tumor-associated macrophages (TAMs) play a critical role in the tumor inflammatory microenvironment and facilitate tumor growth and metastasis. Most types of tumors aberrantly express microRNAs (miRNAs), which can be transferred between cells by exosomes and can regulate gene expression in recipient cells, but it remains unclear whether tumor-derived miRNAs are transferred by exosomes and regulate the TAM phenotype. We report that mouse 4T1 breast cancer cell-derived exosomes enhanced TAM expression of IL-1ß, IL-6, and TNF-α and that inhibition of 4T1-cell exosome secretion through short hairpin RNA-mediated Rab27a/b depletion repressed tumor growth and metastasis and markedly downregulated IL-1ß, IL-6, and TNF-α in a 4T1 breast tumor model. Furthermore, miRNA expression profiling revealed that three miRNAs (miR-100-5p, miR-183-5p, and miR-125b-1-3p) were considerably more abundant in 4T1 cell exosomes than in mouse bone marrow-derived macrophages, indicating potential exosome-mediated transfer of the miRNAs, and, notably, miR-183-5p was found to be transferred from 4T1 cells to macrophages through exosomes. Moreover, PPP2CA was verified as an miR-183-5p target gene, and PPP2CA downregulation enhanced NF-κB signaling and promoted macrophage expression of IL-1ß, IL-6, and TNF-α. Lastly, when miR-183-5p was downregulated in exosomes through miR-183-5p sponge expression in 4T1 cells, these 4T1-derived exosomes triggered diminished p65 phosphorylation and IL-1ß, IL-6, and TNF-α secretion, and the miRNA downregulation also led to repression of tumor growth and metastasis in the 4T1 breast tumor model in vivo. Thus, miR-183-5p expressed in tumor cells was transferred to macrophages by exosomes and promoted the secretion of proinflammatory cytokines by inhibiting PPP2CA expression, which contributed to tumor progression in a breast cancer model.
Subject(s)
Breast Neoplasms/immunology , Exosomes/metabolism , MicroRNAs/metabolism , Protein Phosphatase 2/genetics , Tumor-Associated Macrophages/immunology , Animals , Breast Neoplasms/genetics , Breast Neoplasms/pathology , Cell Communication/genetics , Cell Communication/immunology , Cell Line, Tumor , Cytokines/metabolism , Disease Models, Animal , Disease Progression , Female , Gene Expression Regulation, Neoplastic/immunology , Humans , Mice , Tumor-Associated Macrophages/metabolismABSTRACT
The role of peripheral groups (PGs) on dendrimers in the spontaneous higher-level organization of hierarchically assembled nanofibers was investigated in a series of POSS-based dendritic gelators (POSS-Lys-X, X: -Boc, -Cbz, -Fmoc, etc.). We demonstrate that the PGs not only affect the gelation ability in solutions, but also the construction of orderly entangled fibrous supramolecular networks, e.g., "loofah-like" networks. Attributed to the PGs (especially the -Boc group) causing a lower cooperative assembly, the steady state with the lowest potential energy of gelators can be easily achieved by the higher ordering of nanofiber entanglement into superstructures. The -Boc group-containing dendrimers show low molar enthalpy and molar entropy of gelation, which help the construction of unique three-dimensional (3D) "loofah-like" superstructures. In contrast, the high cooperative assembly of the dendrimer (-Cbz as the PG) promotes the gelator into a higher enthalpy gelation process, with a constructed normal fibrous network. Hence, the PGs of POSS-based dendrimers act as the crucial factor in controlling the hierarchical self-assembly via a thermodynamics approach. This research presents new perspectives to explicate the relationships between PGs of dendrimers, supra-architectures and gel performances, which further guide the design of functional supramolecular materials via controllable self-assembly.
ABSTRACT
Chirality-induced recognition-promoted molecule-level self-sorting assembly in a two-component supramolecular gel system constructed by two polyhedral oligomeric silsesquioxane (POSS) core-based dendritic gelators with similar geometry and peripheral functionality, which would normally form a homogeneous co-assembled network.
ABSTRACT
An amazing phenomenon of the relative magnitude of modulus of two liquid-crystal (LC) gels is found inverted under/above their phase transition temperature TLC-iso , which is further proved to be caused by their diverse morphology flexibility. By testing the polarity of two LCs, gelator POSS-G1-Boc (POSS=polyhedral oligomeric silsesquioxane) was discovered to self-assemble into more flexible structures in a relatively low polar LC, whereas more rigid ones are formed in higher polar LC. Hence, a fitting function to connect morphology flexibility with solvent polarity was established, which can even be generalized to a number of common solvents. Experimental observations and coarse-grained molecular dynamics simulations revealed that solvent polarity mirrors a "Morse code", with each "code" corresponding to a specific morphology flexibility.