ABSTRACT
OBJECTIVE: To investigate the efficacy of posterior axillary approach internal fixation for Ideberg â a andâ ¡ glenoid fractures. METHODS: From December 2018 to September 2021, 9 patients with lower part of glenoid fractures were treated by posterior axillary approach, including 3 males and 6 females, aged from 50 to 78 years old. All the fractures were closed fractures. According to Ideberg type of scapular glenoid fracture was type â a in 6 cases and type â ¡ in 3 cases. AP and lateral X-ray films of scapula were taken at 6, 12 weeks and 6 and 12 months postoperatively. Constant-Murley and disabilities of the arm shoulder and hand (DASH), and other complications were recorded at the latest follow-up. RESULTS: Nine patients were followed up, ranged from 6 to 15 months. And bone healing was achieved in all 9 patients at the final follow-up, the healing time 3 to 6 months, Constant-Murley score at the final follow-up ranged from 55 to 96, and DASH score ranged from 3.33 to 33.33. Both of them were better than preoperative. CONCLUSION: The posterior axillary approach internal fixation for Ideberg â a and Ideberg â ¡ Glenoid fractures scapular fracture is satisfactory and worthy of clinical application.
Subject(s)
Fractures, Bone , Fractures, Closed , Shoulder Fractures , Male , Female , Humans , Middle Aged , Aged , Fractures, Bone/diagnostic imaging , Fractures, Bone/surgery , Fracture Fixation, Internal , Shoulder/surgery , Scapula/surgery , Treatment Outcome , Retrospective StudiesABSTRACT
OBJECTIVE: To explore the clinical effects of protecting the internal structure of the knee and internal fixation through two different directions for the treatment of tibial plateau fractures with medial large block split. METHODS: From January 2010 to January 2016, data of 21 patients of tibial plateau with medial large block split fractures who were treated with protecting the internal structure of the knee and internal fixation through two different directions were retrospectively analyzed, including 17 males and 4 females, with an average age of (39.2±3.2) years old ranging from 27 to 63 years. Anteroposterior and lateral radiographs as well as computed tomography(CT) images were obtained in the course of preoperative. It was made in the operation to protect medial knee structure, combining with internal fixation via two different directions plates(medial and posteromedial). If the posterolateral condyle fracture was involved, a plate was applied through posterolateral approach. Rasmussen score was used for radiological assessment, and HSS knee score was used for efficacy assessment at 1 year after operation. The fracture healing time was judged by X-ray and clinical examinations, additionally, the complications and corresponding outcomes were also recorded. RESULTS: All patients were followed up for 10 to 24 months with an average of(17.2±1.7) months. All fractures were healed, the healing time was 9 to 16 weeks with an average of(11.1±3.2) weeks. The Rasmussen score after surgery was 1 to 18 points with an average of(16.7±1.5) points. Sixteen cases got excellent, 3 good and 2 fair. At the final follow-up, HSS functional scores ranged from 60 to 100 points with an average of (87.3±6.7) points, the result was excellent in 18 cases, good in 2 cases and fair in 1 case. CONCLUSIONS: For a split fracture of the medial tibial plateau, the medial incision, full protection of the medial knee structure, and two different directions of supporting plate fixation are feasible, and the short-term effect is satisfactory.
Subject(s)
Tibial Fractures , Adult , Bone Plates , Female , Fracture Fixation, Internal , Humans , Male , Retrospective Studies , Tibia , Treatment OutcomeABSTRACT
OBJECTIVE: To evaluate the feasibility and efficiency of one-stage external fixation by using locking plate in distal tibial fractures. METHODS: In this non-control prospective study, 28 patients with distal tibial fractures were included and underwent one-stage external fixation by using locking plate. There were 21 males and 7 females, with a mean age of 43 years (19-63). According to AO/OTA fracture classification, there were 9 cases of Type A1, 9 of Type A2, 10 of Type A3 fractures. There were 21 close and 7 open fractures. The locking plate was placed on the anteromedial aspect of the tibia with 4-5 bicortical screws inserted in both distal met- aphysis and diaphysis. The radiographic and clinic results were evaluated. RESULTS: All patients were followed up for the average of 16 months (ranging from 12 to 21 months). The average surgery duration was 38 (25-60) minutes. The mean time to fracture healing were 14.6 ± 2.67, 17.5 ± 3.66, and 18.4 ± 3.37 (p < 0.05) weeks in type A1, A2, and A3 fractures respectively. By the end of the follow-ups, the mean AOFAS score were 96.11 ± 2.32, 92.67 ± 1.80 and 92.00 ± 2.06 (p > 0.05) in type A1, A2, and A3 fractures respectively. None of nonunion, deep infection, or breakage of screw or plate were observed. CONCLUSIONS: Distal tibial fracture was the ideal indication for external fixation using locking plate. The external plating is characterized by ease of performance, less invasive, fewer soft tissue impingement, improved cosmesis, and convenient for removal.
Subject(s)
Bone Plates , External Fixators/statistics & numerical data , Fracture Healing/physiology , Tibial Fractures/surgery , Adult , Analysis of Variance , Cohort Studies , Female , Humans , Injury Severity Score , Male , Middle Aged , Monitoring, Physiologic/methods , Postoperative Care/methods , Prognosis , Prospective Studies , Risk Assessment , Tibial Fractures/diagnostic imaging , Treatment Outcome , Young AdultABSTRACT
OBJECTIVE: To evaluate clinical outcome of suture anchors in strengthening both acromioclavicular and coracoclavicular ligaments in the surgical treatment of acromioclavicular joint dislocation. METHODS: Twenty-eight patients with acute traumatic Rockwood III, IV and V dislocations of the acromioclavicular joint surgically treated at our institute between October 2010 and January 2012 were recruited.All patients underwent open reduction combined with suture anchors. Function was evaluated using the Constant- Murley shoulder score. Clinical and radiographic shoulder ratings were evaluated using Taft criteria at 3, 6 and 12 months. RESULTS: Two cases with fixation loosening were not included in final statistical analysis. Other patients obtained full joint reposition on immediate postoperative radiographs. Follow-up was performed with an average of 15.6 months (range, 12-19). After early range of motion exercises, 96.2% of the patients (25/26) could abduct and elevate their shoulders more than 90 degrees within postoperative 3 months. There was no infection. Average Constant-Murley score was 96.3 points (range, 94-100) and mean Taft shoulder rating was 10.7 points (range, 8-12) at 12 months. CONCLUSION: The suture anchor is a relatively simple technique and can avoid screw removal which is helpful in reconstructing both acromioclavicular and coracoclavicular ligaments in acute traumatic acromioclavicular joint dislocation.
Subject(s)
Acromioclavicular Joint/surgery , Shoulder Dislocation/surgery , Suture Anchors , Adult , Female , Humans , Male , Middle Aged , Range of Motion, Articular , Treatment OutcomeABSTRACT
OBJECTIVE: To investigate the stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint (AAOJ) arthroplasty by comparing with a conventional method. METHODS: After anterior decompression, 24 human cadaveric spinal specimens of C0-C3 were randomly divided into two groups: Group A receiving artificial AAOJ arthroplasty; Group B experiencing anterior transarticular screw (ATAS) fixation. Two groups underwent flexibility test in intact and instrumented states. Rotational angle of the C0-C3 segments was measured to study the immediate stability and function of anterior decompression with AAOJ arthroplasty compared with the intact state and ATAS fixation. RESULTS: Compared with the intact state, anterior decompression with AAOJ arthroplasty resulted in a significant decrease in the range of motion (ROM) and neutral zone (NZ) during flexion, extension and lateral bending (P less than 0.05); however, with regard to axial rotation, there was no significant difference in ROM and NZ (P larger than 0.05). Compared with anterior decompression with ATAS fixation, anterior decompression with AAOJ arthroplasty during flexion, extension and lateral bending, significant difference was found in ROM and NZ (P larger than 0.05); however, as for axial rotation, there was a significant increase in ROM and NZ (P less than 0.05). CONCLUSION: The self-designed AAOJ has an excellent biomechanical performance, which can restore excellent instant stability and preserve the movement of the atlantoaxial joint.
Subject(s)
Arthroplasty/methods , Atlanto-Axial Joint/surgery , Joint Instability/surgery , Adult , Atlanto-Axial Joint/physiopathology , Biomechanical Phenomena , Bone Plates , Bone Screws , Cadaver , Decompression, Surgical , Female , Humans , Joint Instability/physiopathology , Male , Middle Aged , Range of Motion, Articular/physiologyABSTRACT
OBJECTIVE: To investigate therapeutic effects of vacuum sealing drainage (VSD) in the treatment of soft tissue defect combined with tendon and bone exposure. METHODS: From October 2007 to February 2011, 397 patients (412 feet) with open ankle fracture and dislocation combined with soft tissue defected were treated by VSD. There were 301 males and 96 females with an average age of 36 years (ranging age from 20 to 73 years). According to AO classification, 74 feet were type I, 211 feet were type II, 108 feet were type III and 19 feet were type IV. The mean time from injury to operation was 5.6 h ( 2 to 12 h). The mean treatment time of was 10 months (4 to 19 months). RESULTS: One hundred and forty-one patients were primarily healed, 97 patients were sutured at stage II. Split-thick skin grafting was performed at stage II was performed in 103 patients; free flap transplantation was performed in 25 patients. Three of the 34 patients with infection were removed steel plate; Eviscerate flap coverage wound was performed in 14 patients caused by the first metatarsal bone exposure; Toe amputation were performed in 22 cases caused by toes necrosis. Tarsometatarasl joints perforators' surgery was performed in 10 patients with forefeet necrosis. Thirty hundred and six patients were followed up from 3 to 20 months (averaged 10 months). The wounds healed well. CONCLUSION: VSD for soft tissue defects caused by ankle injury is a simple and effective method, but can not replace debridement and transfer flap.
Subject(s)
Ankle Fractures , Drainage/methods , Joint Dislocations/surgery , Vacuum , Adult , Aged , Debridement , Female , Humans , Male , Middle Aged , Skin Transplantation , Treatment Outcome , Young AdultABSTRACT
OBJECTIVE: To investigate the clinical results of the proximal femoral nail antirotation (PFNA) system in the treatment of unstable intertrochanteric femoral fractures. METHODS: From September 2006 to September 2009, 90 patients (40 males and 50 females, ranged in age from 64 to 95 years with an average of 73.2 years with unstable intertrochanteric femoral fractures were surgically treated with PFNA. Fifty patients had the fractures in the right hip, and 40 patients had the fractures in the left hip. The fractures were classified according to the AO classification: 11 patients were type A2.1, 21 patients were type A2.2,25 patients were type A2.3 9 patients were type A3.1,6 patients were A3.2 and 18 patients were A3.3. The patients underwent surgery within a mean of 3.2 days(ranged,2 to 20.1 days) from injury. The mean hospital stay was 12.8 days(ranged,7 to 24 days). Closed reduction was achieved in all the patients. Harris hip score were used for the evaluation of clinical effects. RESULTS: The mean operation time was 36.8 min (ranged, 23 to 110 min) and the mean blood loss was 150 mi (ranged, 100 to 500 ml). The mean follow-up period was 12 months (ranged, 6 to 24 months). All the patients had fracture union. Sixty-nine patients got excellent reduction, 14 good and 7 bad. The mean collodiaphysial angle was 135.60 (ranged, 1260 to 1470). Postoperative complications included secondary varus in 2 patients,calcification at the tip of the greater trochanter in 5 patients, medial thigh pain in 7 patients,and screw cut-out in 1 petient. Ten patients had femoral shortness (mean 9.3 mm,ranging from 8 to 14 mm). The mean Harris hip score was (80.5 +/- 9.8). According to Harris hip scores evaluation system, 26 patients reached an excellent result, 37 good, 18 poor and 9 bad. CONCLUSION: Due to advantages of high union rate, short operation time, and early postoperative mobilization, PFNA osteosynthesis is an idea method for surgical treatment of unstable intertrochanteric femoral fractures.
Subject(s)
Bone Nails , Fracture Fixation, Internal/methods , Hip Fractures/surgery , Aged , Aged, 80 and over , Female , Hip Fractures/diagnostic imaging , Humans , Male , Middle Aged , RadiographyABSTRACT
OBJECTIVE: To get morphologic parameters of Chinese adults through observation and measurement on axial laminas, to evaluate the feasibility of placing axial laminar screws and to introduce the technique. METHODS: Relative parameters of 28 sets of fresh Chinese adults'axial specimens, including distance from the superior and inferior entry points of axial laminar screws to the superior margins of axial laminas, superior, middle, inferior thickness and height of the axial laminas, length and angle of the axial laminar screw trajectories, distance from the entry points of axial laminar screws to the transverse foramen and central points of the inferior articular process, were measured with a digital caliper and a goniometer. Data were statistically analyzed. RESULTS: Averagely, distance from the superior and inferior entry points of axial laminar screws to the superior margins of axial laminas was 5 mm and 9 mm, superior, middle, inferior thickness and the height of the axial laminas were 3.2 mm, 6.7 mm, 5.5 mm and 12.8 mm respectively, and the length of the superior and inferior axial laminar screw trajectories was 26.2 mm and 25.5 mm, respectively. CONCLUSIONS: It is feasible and reliable to apply posterior laminar screw fixation techniques to the axes of Chinese adults. Also the C2 laminar screw fixation technique can be taken as a supplementary to conventional posterior screw fixations of C2.
Subject(s)
Axis, Cervical Vertebra/surgery , Bone Screws , Spinal Fusion/methods , Adult , Aged , Feasibility Studies , Female , Humans , Male , Middle AgedABSTRACT
OBJECTIVE: To investigate the clinical application and efficacy of an internal fixation technique incorporating C(2) laminar screws for upper cervical spine injury. METHODS: Using a posterior cervical approach, incorporating C(2) laminar screw fixation and bone grafting were performed on 20 patients with cervical spine injury. There were 12 male and 8 female patients, with a mean age of 45.6 years (range, 32-71 years). All patients were evaluated by X-ray, computed tomography (CT) and magnetic resonance imaging (MRI). RESULTS: The patients were followed up for 11-35 months (mean, 15 months), and bony union was achieved in all patients. There were no spinal cord or vertebral artery injuries during surgery, and only two instances of vein clump injury, in both of which the bleeding was controlled successfully. Postoperative CT scans showed that all the C(2) laminar screws had been placed properly, and were not encroaching on the spinal canal. No spinal instability, evidence of hardware failure or screw loosening was found during the follow-up period in any patient. CONCLUSION: Crossing C(2) laminar screw internal fixation technique is simple, and is not limited by the position of the vertebral artery in the body of C(2). The laminar screw method avoids arterial injuries and also can be used as a salvage method after previous misinsertion. As all relevant structures are directly visualized during C(2) laminar screw placement, this kind of technique may be applicable to a large number of patients.
Subject(s)
Bone Screws , Cervical Vertebrae/injuries , Joint Dislocations/surgery , Spinal Fractures/surgery , Spinal Fusion/instrumentation , Adult , Aged , Cervical Vertebrae/diagnostic imaging , Cervical Vertebrae/surgery , Female , Follow-Up Studies , Fracture Fixation, Internal/instrumentation , Fracture Fixation, Internal/methods , Humans , Joint Dislocations/diagnosis , Male , Middle Aged , Radiography , Spinal Fractures/diagnosis , Spinal Fusion/methodsABSTRACT
OBJECTIVE: To investigate the stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint (AAOJ) arthroplasty. METHOD: Ten sets of AAOJ implanted in bony specimens from 10 adults were used to test the pull-out strength of the atlas-axis components with a MTS858 Mini Bionix machine. Another twelve human cadaveric specimens including C(0)-C(4) were used to evaluate the three-dimensional movements of C(1)-C(2) under five different conditions in sequence, that is, the complete specimen, anterior decompression, posterior transarticular screws fixation, AAOJ arthroplasty and fatigue test. RESULT: There were significant differences between atlas and axis components in the maximum pull-out strength and trajectory length, however the yield length was not significantly different. The maximum pull-out strength of the atlas and axis was positively correlated with trajectory length (r(1)= 0.880, P < 0.05) and yield length (r(2)= 0.606, P < 0.05), respectively. After AAOJ arthroplasty, the range of movement (ROM) with respect to rotation and the neutral zone of the atlantoaxial joint were close to normal (P > 0.05), but the ROM in flexion-extension and lateral bending was significantly smaller compared with the specimens which underwent anterior decompression (P < 0.05). No abrasion and abnormal mobilization were observed after 2000 cycles of flexion, extension, lateral bending and axial rotation in the fatigue test. CONCLUSIONS: The self-designed AAOJ has excellent biomechanical performance, and AAOJ arthroplasty can restore excellent instant stability and preserve the movement of the atlantoaxial joint.
Subject(s)
Arthroplasty, Replacement/methods , Atlanto-Axial Joint/surgery , Joint Prosthesis , Adult , Arthroplasty, Replacement/instrumentation , Atlanto-Axial Joint/physiopathology , Biomechanical Phenomena , Bone Screws , Female , Humans , Male , Materials Testing/methods , Middle Aged , Prosthesis Failure , Range of Motion, ArticularABSTRACT
OBJECTIVE: To evaluate the screw pull-out strength of posterior C2 when the screw is fixed to C2 through the trans-pedicle or lateral mass or trans-laminar unicortically or bicortically,so as to provide biomechanical basis for the clinical application of posterior C2 screw fixation technique. METHODS: The pedicle screw,the lateral mass screw or the laminar screw was separately anchored into 30 fresh C2 specimens unicortically or bicortically. The screw pull-out strength of different fixation was tested and compared with the others. RESULTS: The average pull-out strength of C2 bicortical pedicle screw was (1255.8 +/- 381.9) N, the strongest during all the methods. The mean pull-out strength of C2 unicortical pedicle screw, C2 bicortical lateral mass screw and C2 bicortical laminar screw were (901.8 +/- 373.3) N, (776.1 +/- 306.8) N and (640.8 +/- 302.9) N respectively,with no statistical difference. CONCLUSION: Pedicle screw should be the first choice for the posterior fixation on axis. C2 lateral mass screw fixation and C2 laminar screw fixation can be another supplement choice and the screw had better be placed bicortically.