Viscoelasticity quantification of cancerous tongue using intraoral optical coherence elastography: a preliminary study.

Quantifying the biomechanical properties of the tongue is significant for early diagnosis of tongue carcinoma. Therefore, an intraoral optical coherence elastography system based on a miniature probe was proposed here to evaluate the viscoelasticity of in vivo tongue for the first time. Results of experiments with Sprague-Dawley rats indicate that considerable elasticity diversity occurred between cancerous and normal tongues, and the corresponding ratio of their Young's modulus was evaluated to be 3.74. It is also found that, viscosity in diseased tissue is smaller than that in normal tissue. Additionally, healthy, transitional and cancerous regions in the cancerous tongue can be distinguished easily by calculating viscoelasticity characteristics. Based on this preliminary attempt, our method with advantages of noninvasive, high-resolution, high-sensitivity and real-time detection and convenient operation may have good potential to become a useful tool for tongue carcinoma assessment after further optimization.

Axially slow-variation microbubble resonators fabricated by an improved arc discharge method for strain sensing applications.

In this paper, we proposed an axially slow-variation microbubble resonator fabricated by an improved arc discharge method and applied to axial strain sensing. The prepared resonators are characterized by ultra-thin wall thickness and axial slow-variation. The wall thickness was experimentally measured to reach 938 nm and maintain a quality factor of an optical mode as large as 7.36 ×107. The main factors affecting the strain sensitivity of the microbubble resonators are investigated theoretically and experimentally. Experimentally, the maximum sensitivity measured was 13.08pm/µÎµ, which is three times higher than the microbubble resonators without this method. The device is simple to prepare and possesses ultra-thin wall thickness. It is promising for applications in high-precision sensing, such as single molecule and biological sensing.

A nanonewton force sensor using a U-shape tapered microfiber interferometer.

Nanomechanical measurements, especially the detection of weak contact forces, play a vital role in many fields, such as material science, micromanipulation, and mechanobiology. However, it remains a challenging task to realize the measurement of ultraweak force levels as low as nanonewtons with a simple sensing configuration. In this work, an ultrasensitive all-fiber nanonewton force sensor structure based on a single-mode-tapered U-shape multimode-single-mode fiber probe is proposed and experimentally demonstrated with a limit of detection of ~5.4 nanonewtons. The use of the sensor is demonstrated by force measurement on a human hair sample to determine the spring constant of the hair. The results agree well with measurements using an atomic force microscope for the spring constant of the hair. Compared with other force sensors based on optical fiber in the literature, the proposed all-fiber force sensor provides a substantial advancement in the minimum detectable force possible, with the advantages of a simple configuration, ease of fabrication, and low cost.

Preparation and Performance of a Fiber Optic Temperature Sensor with Multiple Fluorescence Mechanisms.

The tip of a piece of plastic fiber was dyed with thymol blue to form a temperature probe. The fiber optic sensor was calibrated on a heatboard by comparison with a K-type thermal couple. Fluorescence characteristics including fluorescence intensity, emission bandwidth, peak & barycenter wavelengths, and self-referenced intensity ratio were used to carry the information of environment temperature. Accordingly, more than five temperature sensing functions were retrieved from the fluorescent sensor. Among such functions, the emission band barycenter showed premium precision. Temperature-driven shift of the emission band barycenter has a sensitivity of 0.095 nm/K, with a nonlinearity of 2.2%FS, resolution of 4 K and repeatability of 1.8%FS. The sensor can find its applications in wearable devices and radiofrequency ablation. Finally in a verification experiment, the sensor was used to monitor the temperature of a microwave oven chamber in real time.

Real-time imaging and quantitative analysis of internal gap formation in bulk-fill and conventional resin composites: An OCT evaluation.

BACKGROUND: This study used optical coherence tomography (OCT) to observe real-time internal gap formation in both bulk-fill and conventional resin composites. It aimed to provide a quantitative analysis of variations, addressing the inconclusive nature of microleakage assessment caused by differences in testing methods. METHODS: Fifty extracted third molars prepared with Class I cavities, were divided into five groups (n = 10). Conventional resin Filtek Z350 XT (FZX) was applied with a double-layer filling of 2 mm per layer. Bulk-fill resins X-tra fil (XTF), Filtek Bulk Fill Posterior Restorative (FBP), Surefil SDR Flow + (SDR), and Filtek Flowable Restorative (FFR) were applied with a single-layer filling of 4 mm. Real-time OCT imaging was conducted during light curing. Post-curing, the entire sample was OCT-scanned. Following this, ImageJ software was used to measure the gap (G1 %). Subsequently, thermal cycling (TC) (5000 times, 5 °C-55 °C) was applied, followed by OCT scanning to calculate the gap (G2 %) and ΔG%. Data were analyzed using two-way repeated measures ANOVA, Kruskal-Wallis test, and Duncan's test (α=0.05). RESULTS: There was no significant difference in G1 % among the groups (p > 0.05). Following TC, FZX exhibited the highest G2 %, succeeded by FFR, FBP, XTF, and SDR, with SDR demonstrating the lowest G2 % (p < 0.05). FZX showed the highest ΔG% (p < 0.05), while SDR exhibited the lowest ΔG% (p < 0.05). CONCLUSION: OCT proves to be a promising tool for detecting microleakage. TC exerted a more significant negative impact on conventional resin. Surefil SDR Flow + displayed the least microleakage, both before and after TC.

Quantitative assessment of corneal elasticity distribution after FS-LASIK using optical coherence elastography.

Quantifying corneal elasticity after femtosecond laser-assisted in situ keratomileusis (FS-LASIK) procedure plays an important role in improving surgical safety and quality, since some latent complications may occur ascribing to changes in postoperative corneal biomechanics. Nevertheless, it is suggested that current research has been severely constrained due to the lack of an accurate quantification method to obtain postoperative corneal elasticity distribution. In this paper, an acoustic radiation force optical coherence elastography system combined with the improved phase velocity algorithm was utilized to realize elasticity distribution images of the in vivo rabbit cornea after FS-LASIK under various intraocular pressure levels. As a result, elasticity variations within and between the regions of interest could be identified precisely. This is the first time that elasticity imaging of in vivo cornea after FS-LASIK surgery was demonstrated, and the results suggested that this technology may hold promise in further exploring corneal biomechanical properties after refractive surgery.

Two-dimensional elastic distribution imaging of the sclera using acoustic radiation force optical coherence elastography.

The scleral elasticity is closely related with many ocular diseases, but the relevant research is still insufficient. Here, we utilized optical coherence elastography to carefully study biomechanical properties of the sclera at different positions and under different intraocular pressures. Meanwhile, elastic wave velocity and Young's modulus of each position were obtained using a phase velocity algorithm. Accordingly, the two-dimensional elasticity distribution image was achieved by mapping the Young's modulus values to the corresponding structure based on the relationship between the position and its Young's modulus. Therefore, elastic information in regions-of-interest can be read and compared directly from the scleral structure, indicating that our method may be a very useful tool to evaluate the elasticity of sclera and provide intuitive and reliable proof for diagnosis and research.

Quantitative evaluation of biomechanical properties of optic nerve head by using acoustic radiation force optical coherence elastography.

Significance: Previous studies have demonstrated that the biomechanical properties of the optic nerve head (ONH) are associated with a variety of ophthalmic diseases; however, they have not been adequately studied. Aim: We aimed to obtain a two-dimensional (2D) velocity distribution image based on the one-to-one correspondence between velocity values and position using the acoustic radiation force optical coherence elastography (ARF-OCE) technique combined with a 2D phase velocity algorithm. Approach: An ARF-OCE system has the advantages of non-invasive detection, high resolution, high sensitivity, and high-speed imaging for quantifying the biomechanical properties of the ONH at different intraocular pressures (IOPs) and detection directions. The 2D phase velocity algorithm is used to calculate the phase velocity values at each position within the imaging region, and then the 2D velocity distribution image is realized by mapping the velocity values to the corresponding structure based on the one-to-one relationship between velocity and position. The elasticity changes can be read directly according to the quantitative relationship between Lamb wave velocity and Young's modulus. Results: Our quantitative results show that the phase velocity and Young's modulus of the ONH increase by 32.50% and 129.44%, respectively, with increasing IOP, which is in general agreement with the results of previous studies, but they did not produce large fluctuations with the constant change of the ONH direction. These results are consistent with the changes of elastic information in the 2D velocity distribution image. Conclusions: The results suggest that the ARF-OCE technology has great potential in detecting the biomechanical properties of the ONH at different IOPs and directions, and thus may offer the possibility of clinical applications.

Measurement of CO2 Isotopologue Ratios Using a Hollow Waveguide-Based Mid-Infrared Dispersion Spectrometer.

We demonstrate for the first time the measurement of CO2 isotope ratios (13C/12C and 18O/16O) in a hollow waveguide (HWG) fiber using a mid-infrared heterodyne phase-sensitive dispersion spectrometer (HPSDS). A 4.329 µm interband cascade laser is used to target the absorption lines of three CO2 isotopes (13C16O2, 18O12C16O, and 12C16O2) in a 1 m long and 1 mm inner diameter HWG fiber. The detection limits are 0.29 ppm, 65.78 ppb, and 14.65 ppm with an integration time of 218 s for 13C16O2, 18O12C16O, and 12C16O2, respectively, at a modulation frequency of 160 MHz and a pressure of 230 mbar. The measurement precisions of δ13C and δ18O are 0.89 and 0.88 ‰, respectively, corresponding to an integration time of 167 s. An experimental comparison between a HPSDS and a built wavelength modulation system with second-harmonic detection (WMS-2f) is conducted. The results show that compared to the WMS-2f, the developed HPSDS exhibits a greater linear dynamic range and excellent long-term stability. This work aims to demonstrate a detection technique of CO2 isotope dispersion spectroscopy with a large dynamic range for relevant applications focusing on samples with high concentrations of CO2 (% volume fraction), such as respiratory analysis in medical diagnostics.

Cascaded stimulated Brillouin laser and Brillouin-Kerr optical frequency comb in high-Q MgF2 disk resonators.

Backward stimulated Brillouin scattering (SBS) in optical microcavities has been widely used in nonlinear optics and microwave photonics. Compared with glass material microcavity, magnesium fluoride crystal microcavity has the advantages of small absorption coefficient, fewer defects and larger nonlinear coefficient, moreover, it usually has a narrow gain bandwidth of tens of megahertz. Here, we design a high precision machining system to produce ultra-smooth surface magnesium fluoride crystal disk cavities with a diameter of about 5 mm, Q value exceeding 108, FSR matching material Brillouin gain. By simply modulating the pump wavelength and coupling power, we observe SBS phenomena with a 13.47 GHz Brillouin frequency shift near 1.55µm and cascaded stimulated Brillouin lasers (SBL) of up to 12 orders. In addition, the Brillouin-Kerr optical frequency comb in this device is demonstrated, observing nearly 300 comb lines spanning across a spectral window of 250 nm. Our research provides a way to fabricate high-Q crystal microcavities and demonstrates the potential of these devices in applications such as microwave sources and nonlinear optics.

Demonstration of a Rayleigh-Brillouin scattering spectrometer with a high spectral resolution for rapid gas temperature detection.

A novel, to the best of our knowledge, Rayleigh-Brillouin scattering (RBS) spectrometer based on a virtually imaged phased array (VIPA) with a high spectral resolution is proposed for rapid gas temperature detection. CO2 RBS spectra at gas pressure of 0.5-4 bar were acquired with a spectrum acquisition time of 10 s, and temperature inversion analysis was performed using TENTI S6 model. The root-mean-square error (RMSE) of the RBS profile fitting is less than 2.95%, and the maximum absolute error of temperature inversion is less than 2.45 K. Compared with traditional methods, this method has low RBS signal loss and short acquisition time without the frequency scanning process, which is more conducive to real-time detection applications.

Supershear Rayleigh wave imaging for quantitative assessment of biomechanical properties of brain using air-coupled optical coherence elastography.

Recently, supershear Rayleigh waves (SRWs) have been proposed to characterize the biomechanical properties of soft tissues. The SRWs propagate along the surface of the medium, unlike surface Rayleigh waves, SRWs propagate faster than bulk shear waves. However, their behavior and application in biological tissues is still elusive. In brain tissue elastography, shear waves combined with magnetic resonance elastography or ultrasound elastography are generally used to quantify the shear modulus, but high spatial resolution elasticity assessment in 10 µm scale is still improving. Here, we develop an air-coupled ultrasonic transducer for noncontact excitation of SRWs and Rayleigh waves in brain tissue, use optical coherent elastography (OCE) to detect, and reconstruct the SRW propagation process; in combing with a derived theoretical model of SRWs on a free boundary surface, we quantify the shear modulus of brain tissue with high spatial resolution. We first complete validation experiments using a homogeneous isotropic agar phantom, and the experimental results clearly show the SRW is 1.9649 times faster than the bulk shear waves. Furthermore, the propagation velocity of SRWs in both the frontal and parietal lobe regions of the brain is all 1.87 times faster than the bulk shear wave velocity. Finally, we evaluated the anisotropy in different brain regions, and the medulla oblongata region had the highest anisotropy index. Our study shows that the OCE system using the SRW model is a new potential approach for high-resolution assessment of the biomechanical properties of brain tissue.

Noncontact longitudinal shear wave imaging for the evaluation of heterogeneous porcine brain biomechanical properties using optical coherence elastography.

High-resolution quantification of heterogeneous brain biomechanical properties has long been an important topic. Longitudinal shear waves (LSWs) can be used to assess the longitudinal Young's modulus, but contact excitation methods have been used in most previous studies. We propose an air-coupled ultrasound transducer-based optical coherence elastography (AcUT-OCE) technique for noncontact excitation and detection of LSWs in samples and assessment of the nonuniformity of the brain's biomechanical properties. The air-coupled ultrasonic transducer (AcUT) for noncontact excitation of LSWs in the sample has a center frequency of 250 kHz. Phase-resolved Doppler optical coherence tomography (OCT) was used to image and reconstruct the propagation behavior of LSWs and surface ultrasound waves at high resolution. An agar phantom model was used to verify the feasibility of the experimental protocol, and experiments with ex vivo porcine brain samples were used to assess the nonuniformity of the brain biomechanical properties. LSWs with velocities of 0.83 ± 0.11 m/s were successfully excited in the agar phantom model. The perivascular elastography results in the prefrontal cortex (PFC) of the ex vivo porcine brains showed that the Young's modulus was significantly higher in the longitudinal and transverse directions on the left side of the cerebral vessels than on the right side and that the Young's modulus of the PFC decreased with increasing depth. The AcUT-OCE technique, as a new scheme for LSW applications in in vivo elastography, can be used for noncontact excitation of LSWs in brain tissue and high-resolution detection of heterogeneous brain biomechanical properties.

Methane detection with a near-infrared heterodyne phase-sensitive dispersion spectrometer at a stronger frequency modulation using direct injection-current dithering.

Heterodyne phase-sensitive dispersion spectrometer (HPSDS) retrieves the concentration of gas samples by measuring the refractive index fluctuations near the molecular resonance. Compared to previous HPSDS studies focusing on pure intensity modulation, it is attractive to investigate the performance of HPSDS sensor based on a distributed feedback (DFB) laser under conditions where frequency modulation is much higher than intensity modulation. In this work, we report the implementation of a near-infrared HPSDS for methane detection based on the direct modulation of a DFB laser. The performance of our HPSDS is assessed using the characteristic absorption peak of methane near 1653.7 nm. Long-time measurements show that our HPSDS has a detection limit (MDL) of 1.22 ppm at standard atmospheric pressure and room temperature. In the same experimental conditions, we have experimentally compared HPSDS to wavelength modulation spectroscopy (WMS) to evaluate the dynamical range, long-term stability, and precision limits of the two methods.

Quantitative analysis of the degree of demineralization for bleached enamel by optical coherence tomography.

BACKGROUND: Tooth bleaching imparts whitening effects along with adverse effects such as increased tooth sensitivity and enamel surface changes. Herein, we employed optical coherence tomography (OCT), a nondestructive optical detection technique, for evaluation of tooth enamel after treatment with peroxide-based bleaching agents. METHODS: Fifteen enamel samples were bleached using 38% acidic hydrogen peroxide-based bleach, subjected to OCT scanning, and then cross-sectioned and imaged under polarized light microscopy (PLM) and transverse microradiography (TMR). OCT cross-sectional images were compared with PLM and TMR. The depth and severity of demineralization produced in the bleached enamel were measured by OCT, PLM, and TMR. Comparison between the three techniques was performed using Kruskal-Wallis H non-parametric test and Pearson correlation. RESULTS: In comparison with PLM and TMR, OCT clearly detected the changes in the enamel surface after hydrogen peroxide bleaching. Significant correlations (p<0.05) were observed in lesion depth between OCT and PLM (r=0.820), OCT and TMR (r=0.822), and TMR and PLM (r=0.861). There was no statistically significant difference in demineralization depth values measured by OCT, PLM, and TMR (p>0.05). CONCLUSION: OCT can allow real-time, non-invasive imaging of artificially bleached tooth models and automatically measure the early changes in the enamel lesion structure upon exposure to hydrogen peroxide-based bleaching agents.

A label-free fiber ring laser biosensor for ultrahigh sensitivity detection of Salmonella Typhimurium.

The rapid detection of low concentrations of Salmonella Typhimurium (S. Typhimurium) is an essential preventive measure for food safety and prevention of foodborne illness. The study presented in this paper addresses this critical issue by proposing a single mode-tapered seven core-single mode (STSS) fiber ring laser (FRL) biosensor for S. Typhimurium detection. The experimental results show that the specific detection time of S. Typhimurium is less than 20 min and the wavelength shift can achieve -0.906 nm for an S. Typhimurium solution (10 cells/mL). Furthermore, at a lower concentration of 1 cell/mL applied to the biosensor, a result of -0.183 nm is observed in 9% of samples (1/11), which indicates that the proposed FRL biosensor has the ability to detect 1 cell/mL of S. Typhimurium. In addition, the detection results in chicken and pickled pork samples present an average deviation of -27% and -23%, respectively, from the measured results in phosphate buffered saline. Taken together, these results show the proposed FRL biosensor may have potential applications in the fields of food safety monitoring, medical diagnostics, etc.

Novel acoustic radiation force optical coherence elastography based on ultrasmall ultrasound transducer for biomechanics evaluation of in vivo cornea.

We developed a novel acoustic radiation force optical coherence elastography (ARF-OCE) based on an ultrasmall ultrasound transducer for quantitative biomechanics evaluations of in vivo cornea. A custom single-sided meta-ultrasonic transducer with an outer diameter of 1.8 mm, focal spot diameter of 1.6 mm, central frequency of 930 kHz, and focal length of 0.8 mm was applied to excite the sample. The sample arm of the ARF-OCE system employed a three-dimensional printed holder that allowed for ultrasound excitation and ARF-OCE detection. The phase-resolved algorithm was combined with a Lamb wave model to depth-resolved evaluate corneal biomechanics after keratoconus and cross-linking treatments (CXL). The results showed that, compare to the healthy cornea, the Lamb wave velocity was significantly reduced in the keratoconus, increased in the cornea after CXL, and increased with cross-linked irradiation energy in the cornea. These results indicated the good clinical translation potential of the proposed novel ARF-OCE.

Integrated label-free erbium-doped fiber laser biosensing system for detection of single cell Staphylococcus aureus.

A critical challenge to realize ultra-high sensitivity with optical fiber interferometers for label free biosensing is to achieve high quality factors (Q-factor) in liquid. In this work a high Q-factor of 105, which significantly improves the detection resolution is described based on a structure of single mode -core-only -single mode fiber (SCS) with its multimode (or Mach-Zehnder) interference effect as a filter that is integrated into an erbium-doped fiber laser (EDFL) system for excitation. In the case study, the section of core-only fiber is functionalized with porcine immunoglobulin G (IgG) antibodies, which could selectively bind to bacterial pathogen of Staphylococcus aureus (S. aureus). The developed microfiber-based biosensing platform called SCS-based EDFL biosensors can effectively detect concentrations of S. aureus from 10 to 105 CFU/mL, with a responsivity of 0.426 nm wavelength shift in the measured spectrum for S. aureus concentration of 10 CFU/mL. The limit of detection (LoD) is estimated as 7.3 CFU/mL based on the measurement of S. aureus with minimum concentration of 10 CFU/mL. In addition, when a lower concentration of 1 CFU/mL is applied to the biosensor, a wavelength shift of 0.12 nm is observed in 10% of samples (1/10), indicating actual LoD of 1 CFU/mL for the proposed biosensor. Attributed to its good sensitivity, stability, reproducibility and specificity, the proposed EDFL based biosensing platform has great potentials for diagnostics.

Acoustic radiation force optical coherence elastography: A preliminary study on biomechanical properties of trabecular meshwork.

Evaluating biomechanical properties of trabecular meshwork (TM) is of great significance for understanding the mechanism of aqueous humor circulation and its relationship to some eye diseases such as glaucoma; however, there is almost no relevant study due to the lack of clinical measurement tool. In this paper, an acoustic radiation force optical coherence elastography (ARF-OCE) system is developed with the advantages of noninvasive detection, high resolution, high sensitivity, and high-speed imaging, by which elastic modulus of the porcine and human TMs is accurately quantified. As the first OCE imaging of TM, our study demonstrates that ARF-OCE may be an effective approach to advance the research of diseases related to aqueous humor circulation.

Retrieval of sound-velocity profile in ocean by employing Brillouin scattering LiDAR.

Accurate remote sensing of the sound velocity profile of the upper-ocean mixed layers is of major important in oceanography, especially in underwater acoustic communication. However, the existing technologies cannot realize fast and real-time detection on sound velocity profile, a cost efficiency, flexibility, and real-time remote sensing technique is still highly urgent. In this paper, we propose a novel approach based on stimulated Brillouin scattering (SBS) LiDAR for retrieving the sound velocity profile. The sound velocity profiles in the upper-ocean mixed layer of South China Sea were retrieved theoretically and experimentally. We simulated the sound velocity profile of the upper-ocean mixed layer in South China Sea by using the Del Grosso algorithm and the data of temperature, salinity, depth selected from the World Ocean Atlas 2018 (WOA18). We designed a special ocean simulation system to measure the sound velocity in seawater with different temperatures, salinities, and pressures through measuring the frequency shift of SBS. Based on the measured sound velocities, we built a retrieval equation to express the sound velocity as a function of temperature, salinity, and pressure. Then, we retrieved the sound velocity profile of the upper-ocean mixed layer of South China Sea by using the retrieval equation. The results show that the retrieved sound velocity profile is good agreement with the theoretical simulation, and the difference between them is approximately 1∼2 m/s. Also, we have analyzed the differences between the theoretical simulation and experimental measurement. This work is essential to future application for remote sensing the sound velocity distribution profiles of the upper-ocean mixed layers by using the Brillouin LiDAR technique.