Critical evaluation of the performance of rhamnolipids as surfactants for (phyto)extraction of Cd, Cu, Fe, Pb and Zn from copper smelter-affected soil.

Rhamnolipids are biosurfactants produced by bacteria belonging to the Pseudomonas genus. They are discussed to complex heavy metal cations stronger than cations of Fe, Ca, Mg. It is therefore suggested to employ rhamnolipids in phytoextraction where their addition to soil should result in preferential complexation of heavy metals that can be taken up by plants, thus enabling rapid and ecological clean-up of contaminated soil. In order to test this concept, we evaluated the rhamnolipid-mediated phytoextraction of heavy metal from soil collected from the vicinity of a copper smelter. The following aspects were investigated: i) selectivity of rhamnolipids towards Cu, Zn, Pb, Cd and Fe during soil washing; ii) phytoextraction efficiency of each ion with respect to the effective concentration of rhamnolipids; iii) possible phytotoxic effects; iv) effect of micro-sized polystyrene amendment. The experiments evaluated soil washing efficiency, BCR (Community Bureau of Reference) sequential extraction to determine the impact of rhamnolipids on the mobility of metal ions, phytoextraction with maize (Zea mays L.) and phytotoxic effects based on dry matter, chlorophyll fluorescence and content. The obtained results indicated that rhamnolipids lack desired selectivity towards heavy metal ions as Fe was complexed more efficiently by 80 % of the available rhamnolipids compared to priority pollutants like Zn, Cu, Pb, which were complexed by only 20 % of the tested rhamnolipids. With increased concentration of rhamnolipids, the soil washing efficiency increased and shifted in favour of Fe, reaching values of approx. 469 mg for Fe and only 118 mg in total of all tested heavy metals. Phytoextraction also favoured the accumulation of Fe, while Cd was not removed from the soil even at the highest applied rhamnolipid concentrations. Considering the selectivity of rhamnolipids and the costs associated with their production, our results suggest the need to search for other alternative (bio)surfactants with better selectivity and lower price.

Exploring engineered vesiculation by Pseudomonas putida KT2440 for natural product biosynthesis.

Pseudomonas species have become promising cell factories for the production of natural products due to their inherent robustness. Although these bacteria have naturally evolved strategies to cope with different kinds of stress, many biotechnological applications benefit from engineering of optimised chassis strains with specially adapted tolerance traits. Here, we explored the formation of outer membrane vesicles (OMV) of Pseudomonas putida KT2440. We found OMV production to correlate with the recombinant production of a natural compound with versatile beneficial properties, the tripyrrole prodigiosin. Further, several P. putida genes were identified, whose up- or down-regulated expression allowed controlling OMV formation. Finally, genetically triggering vesiculation in production strains of the different alkaloids prodigiosin, violacein, and phenazine-1-carboxylic acid, as well as the carotenoid zeaxanthin, resulted in up to three-fold increased product yields. Consequently, our findings suggest that the construction of robust strains by genetic manipulation of OMV formation might be developed into a useful tool which may contribute to improving limited biotechnological applications.

Adaptation of the metolachlor-degrading fungus Trichoderma harzianum to the simultaneous presence of low-density polyethylene (LDPE) microplastics.

Although it is known that microplastics (MPs) in soils cause a threat to this complex environment, the actual effects of MPs on soil microorganisms and their catabolic activities, particularly with the biodegradation of herbicides, remain unclear. Hence, the objective of this study was to investigate the effects of a simultaneous presence of metolachlor and low-density polyethylene (LDPE) microplastics on growth inhibition and adaptive responses of Trichoderma harzianum in soil microcosms. Using ergosterol content as an indicator of fungal biomass, it was observed that MPs alone had a marginal inhibitory effect on the growth of the fungus, whereas MET exhibited a dose-dependent inhibitory effect on T. harzianum. However, the presence of MPs did not influence the fungal transforming activity toward the herbicide. Conversely, analysis of lipid profiles in the presence of MPs and herbicides revealed a reduction in the overall fluidity of phospholipid fatty acids, primarily attributed to an increase in lysophospholipids. The activities of six extracellular enzymes in the soil, measured using methylumbelliferone-linked substrates, were significantly enhanced in the presence of MET. These findings contribute to a broader understanding of the alterations in fungal activity in soil resulting from the influence of MPs and MET.

Production of (hydroxy)benzoate-derived polyketides by engineered Pseudomonas with in situ extraction.

Polyketides from (hydroxy)benzoates are an interesting group of plant polyphenolic compounds, whose biotechnological production is so far underrepresented due to their challenging heterologous biosynthesis. Efficient heterologous production of 2,4,6-tri- and 2,3',4,6-tetrahydroxybenzophenone, 3,5-dihydroxybiphenyl, and 4-hydroxycoumarin by whole-cell biocatalysis in combination with in situ product extraction with an organic solvent was demonstrated. Production was highly dependent on the used CoA ligase and polyketide synthase type III. Therefore, different combinations of polyketide synthases and benzoate-CoA ligases were evaluated for their biosynthesis performance in the solvent-tolerant Pseudomonas taiwanensis VLB120. A solvent screening yielded 2-undecanone as biocompatible, extraction-efficient solvent with good phase separation. In aqueous-organic two-phase cultivations, this solvent extraction circumvents product instability in the aqueous cultivation medium, and it increases yields by reducing inhibitory effects. Complete de novo synthesis from glucose of all (hydroxy)benzoate-derived polyketides was achieved in two-phase cultivations with metabolically engineered strains. Additionally, mutasynthesis was applied to obtain fluorinated benzophenone derivatives.

Sorption of ionic liquids in soil enriched with polystyrene microplastic reveals independent behavior of cations and anions.

Recently, much attention has been focused on the application of the Ionic Liquids (ILs) with herbicidal activity in agriculture. It has been suggested that through the appropriate selection of cations and anions, one can adjust the properties of ILs, particularly the hydrophobicity, solubility, bioavailability, toxicity. In practical agricultural conditions, it will be beneficial to reduce the mobility of herbicidal anions, such as the commonly applied 2,4-dichlorophenoxyacetic acid [2,4-D] in the soil. Furthermore, microplastics are becoming increasingly prevalent in the soil, potentially stimulating herbicidal sorption. Therefore, we investigated whether cations in ILs influence the mobility of anions in OECD soil supplemented with polystyrene microplastic (PS). For this purpose, we used the 2,4-D based ILs consisting of: a hydrophilic choline cation [Chol][2,4-D] and a hydrophobic choline cation with a C12chain [C12Chol][2,4-D]. Characterization of selected micropolystyrene was carried out using the BET sorption-desorption isotherm, particle size distribution and changes in soil sorption parameters such as soil sorption capacity and cation exchange capacity. Based on the batch sorption experiment, the effect of microplastic on the sorption of individual cations and anions in soil contaminated with micropolystyrene was evaluated. The results obtained indicate that the introduction of a 1-10% (w/w) PS resulted in an 18-23% increase of the soil sorption capacity. However, the sorption of both ILs' cations increased only by 3-5%. No sorption of the [2,4-D] anion was noted. This suggests that cations and anions forming ILs, behave independently of each other in the environment. The results indicate the fact that ILs upon introduction into the environment are not a new type of emerging contaminant, but rather a typical mixture of ions. It is worth noting that when analyzing the behavior of ILs in the environment, it is necessary to follow the fate of both cations and anions.

Assessment of New and Genome-Reduced Pseudomonas Strains Regarding Their Robustness as Chassis in Biotechnological Applications.

Organic olvent-tolerant strains of the Gram-negative bacterial genus Pseudomonas are discussed as potential biocatalysts for the biotechnological production of various chemicals. However, many current strains with the highest tolerance are belonging to the species P. putida and are classified as biosafety level 2 strains, which makes them uninteresting for the biotechnological industry. Therefore, it is necessary to identify other biosafety level 1 Pseudomonas strains with high tolerance towards solvents and other forms of stress, which are suitable for establishing production platforms of biotechnological processes. In order to exploit the native potential of Pseudomonas as a microbial cell factory, the biosafety level 1 strain P. taiwanensis VLB120 and its genome-reduced chassis (GRC) variants as well as the plastic-degrading strain P. capeferrum TDA1 were assessed regarding their tolerance towards different n-alkanols (1-butanol, 1-hexanol, 1-octanol, 1-decanol). Toxicity of the solvents was investigated by their effects on bacterial growth rates given as the EC50 concentrations. Hereby, both toxicities as well as the adaptive responses of P. taiwanensis GRC3 and P. capeferrum TDA1 showed EC50 values up to two-fold higher than those previously detected for P. putida DOT-T1E (biosafety level 2), one of the best described solvent-tolerant bacteria. Furthermore, in two-phase solvent systems, all the evaluated strains were adapted to 1-decanol as a second organic phase (i.e., OD560 was at least 0.5 after 24 h of incubation with 1% (v/v) 1-decanol), which shows the potential use of these strains as platforms for the bio-production of a wide variety of chemicals at industrial level.

Toward the future of OECD/ISO biodegradability testing-new approaches and developments.

In the past decades, industrial and scientific communities have developed a complex standardized system (e.g., OECD, ISO, CEN) to evaluate the biodegradability of chemical substances. This system includes for OECD three levels of testing (ready and inherent biodegradability tests, simulation tests). It was adopted by many countries and is completely integrated into European legislation (registration, evaluation, authorization, and restriction of chemicals, REACH). Nevertheless, the different tests have certain deficiencies, and the question arises of how accurately these tests display the situation in the real environment and how the results can be used for predictions. This review will focus on the technical advantages and weaknesses of current tests concerning the technical setup, the inoculum characterization, and its biodegradation potential as well as the use of adequate reference compounds. A special focus of the article will be on combined test systems offering enhanced possibilities to predict biodegradation. The properties of microbial inocula are critically discussed, and a new concept concerning the biodegradation adaptation potential (BAP) of inocula is proposed. Furthermore, a probability model and different in silico QSAR (quantitative structure-activity relationships) models to predict biodegradation from chemical structures are reviewed. Another focus lies on the biodegradation of difficult single compounds and mixtures of chemicals like UVCBs (unknown or variable composition, complex reaction products, or biological materials) which will be an important challenge for the forthcoming decades. KEY POINTS: • There are many technical points to be improved in OECD/ISO biodegradation tests • The proper characterization of inocula is a crucial point in biodegradation tests • Combined biodegradation test systems offer extended possibilities for biodegradation tests.

2,4-D versus 2,4-D based ionic liquids: Effect of cation on herbicide biodegradation, tfdA genes abundance and microbiome changes during soil bioaugmentation.

The commercial formulations of herbicides rely on surfactants which increase the efficiency of active substance. Herbicidal ionic liquids (ILs), in which cationic surfactants are combined with herbicidal anions, allow for additives' reduction and ensure very good herbicide performance with lower doses. We aimed to test the impact of synthetic and natural cations on biological degradation of 2,4-dichlorophenoxyacetic acid (2,4-D). Although primary biodegradation was high, the mineralization in agricultural soil indicated incomplete conversion of ILs to CO2. Even the introduction of naturally-derived cations resulted in an increase in the herbicide's half-lives - from 32 days for [Na][2,4-D] to 120 days for [Chol][2,4-D] and 300 days for the synthetic tetramethylammonium derivative [TMA][2,4-D]. Bioaugmentation with 2,4-D-degrading strains improves the herbicides' degradation, which was reflected by higher abundance of tfdA genes. Microbial community analysis confirmed that hydrophobic cationic surfactants, even those based on natural compounds, played a negative role on microbial biodiversity. Our study provides a valuable indication for further research related to the production of a new generation of environmentally friendly compounds. Moreover, the results shed a new light on the ionic liquids as independent mixtures of ions in the environment, as opposed to treating them as new type of environmental pollutants.

Glyphosate versus glyphosate based ionic liquids: Effect of cation on glyphosate biodegradation, soxA and phnJ genes abundance and microbial populations changes during soil bioaugmentation.

The applicability of herbicidal ionic liquids (HILs) as an alternative form of herbicides is currently evaluated. Yet, the available research is lacking information on the behaviour of herbicidal ionic liquids upon addition to the environment, i.e., if cations and anions act as separate moieties or remain an ionic salt. Hence, we tested degradation of five HILs with the glyphosate anion, their bioavailability in soil, toxicity towards microorganisms, impact on the biodiversity and the abundance of phnJ and soxA genes. The cations were proven to be slightly or moderately toxic. The properties of cations determined the properties of the whole formulation, which might suggest that cations and anion act as the independent mixture of ions. The mineralisation efficiencies were in the range of 15-53%; however, in the case of cations (except non-toxic choline), only 13-20% were bioavailable for degradation. The hydrophobic cations were proven to be highly sorbed, while the anion was readily available for microbial degradation regardless of its counterion. The approach to enrich test samples with isolated microorganisms specialised in glyphosate degradation resulted in higher degradation efficiencies, yet not high enough to mitigate the negative impact of cations. In addition, increased activity of enzymes participating in glyphosate degradation was observed. In the view of obtained results, the use of cationic surfactants in HILs structure is not recommended, as sorption was shown to be determining factor in HILs degradation efficiency. Moreover, obtained results indicate that corresponding ions in HILs might act as separate moieties in the environment.

Basic principles for biosurfactant-assisted (bio)remediation of soils contaminated by heavy metals and petroleum hydrocarbons - A critical evaluation of the performance of rhamnolipids.

Despite the fact that rhamnolipids are among the most studied biosurfactants, there are still several gaps which must be filled. The aim of this review is to emphasize and to indicate which issues should be taken into account in order to achieve efficient rhamnolipids-assisted biodegradation or phytoextraction of soils contaminated by heavy metals and petroleum hydrocarbons without harmful side effects. Four main topics have been elucidated in the review: effective concentration of rhamnolipids in soil, their potential phytotoxicity, susceptibility to biodegradation and interaction with soil microorganisms. The discussed elements are often closely associated and often overlap, thus making the interpretation of research results all the more challenging. Each dedicated section of this review includes a description of potential issues and questions, an explanation of the background and rationale for each problem, analysis of relevant literature reports and a short summary with possible application guidelines. The main conclusion is that there is a necessity to establish regulations regarding effective concentrations for rhamnolipids-assisted remediation of soil. The use of an improper concentration is the direct cause of all the other discussed phenomena.

Adaptation and Resistance: How Bacteroides thetaiotaomicron Copes with the Bisphenol A Substitute Bisphenol F.

Bisphenols are used in the process of polymerization of polycarbonate plastics and epoxy resins. Bisphenols can easily migrate out of plastic products and enter the gastrointestinal system. By increasing colonic inflammation in mice, disrupting the intestinal bacterial community structure and altering the microbial membrane transport system in zebrafish, bisphenols seem to interfere with the gut microbiome. The highly abundant human commensal bacterium Bacteroides thetaiotaomicron was exposed to bisphenols (Bisphenol A (BPA), Bisphenol F (BPF), Bisphenol S (BPS)), to examine the mode of action, in particular of BPF. All chemicals caused a concentration-dependent growth inhibition and the half-maximal effective concentration (EC50) corresponded to their individual logP values, a measure of their hydrophobicity. B. thetaiotaomicron exposed to BPF decreased membrane fluidity with increasing BPF concentrations. Physiological changes including an increase of acetate concentrations were observed. On the proteome level, a higher abundance of several ATP synthase subunits and multidrug efflux pumps suggested an increased energy demand for adaptive mechanisms after BPF exposure. Defense mechanisms were also implicated by a pathway analysis that identified a higher abundance of members of resistance pathways/strategies to cope with xenobiotics (i.e., antibiotics). Here, we present further insights into the mode of action of bisphenols in a human commensal gut bacterium regarding growth inhibition, and the physiological and functional state of the cell. These results, combined with microbiota-directed effects, could lead to a better understanding of host health disturbances and disease development based on xenobiotic uptake.

Gaseous NO2 induces various envelope alterations in Pseudomonas fluorescens MFAF76a.

Anthropogenic atmospheric pollution and immune response regularly expose bacteria to toxic nitrogen oxides such as NO• and NO2. These reactive molecules can damage a wide variety of biomolecules such as DNA, proteins and lipids. Several components of the bacterial envelope are susceptible to be damaged by reactive nitrogen species. Furthermore, the hydrophobic core of the membranes favors the reactivity of nitrogen oxides with other molecules, making membranes an important factor in the chemistry of nitrosative stress. Since bacteria are often exposed to endogenous or exogenous nitrogen oxides, they have acquired protection mechanisms against the deleterious effects of these molecules. By exposing bacteria to gaseous NO2, this work aims to analyze the physiological effects of NO2 on the cell envelope of the airborne bacterium Pseudomonas fluorescens MFAF76a and its potential adaptive responses. Electron microscopy showed that exposure to NO2 leads to morphological alterations of the cell envelope. Furthermore, the proteomic profiling data revealed that these cell envelope alterations might be partly explained by modifications of the synthesis pathways of multiple cell envelope components, such as peptidoglycan, lipid A, and phospholipids. Together these results provide important insights into the potential adaptive responses to NO2 exposure in P. fluorescens MFAF76a needing further investigations.

Extracellular degradation of a polyurethane oligomer involving outer membrane vesicles and further insights on the degradation of 2,4-diaminotoluene in Pseudomonas capeferrum TDA1.

The continuing reports of plastic pollution in various ecosystems highlight the threat posed by the ever-increasing consumption of synthetic polymers. Therefore, Pseudomonas capeferrum TDA1, a strain recently isolated from a plastic dump site, was examined further regarding its ability to degrade polyurethane (PU) compounds. The previously reported degradation pathway for 2,4-toluene diamine, a precursor and degradation intermediate of PU, could be confirmed by RNA-seq in this organism. In addition, different cell fractions of cells grown on a PU oligomer were tested for extracellular hydrolytic activity using a standard assay. Strikingly, purified outer membrane vesicles (OMV) of P. capeferrum TDA1 grown on a PU oligomer showed higher esterase activity than cell pellets. Hydrolases in the OMV fraction possibly involved in extracellular PU degradation were identified by mass spectrometry. On this basis, we propose a model for extracellular degradation of polyester-based PUs by P. capeferrum TDA1 involving the role of OMVs in synthetic polymer degradation.

An optimized method for RNA extraction from the polyurethane oligomer degrading strain Pseudomonas capeferrum TDA1 growing on aromatic substrates such as phenol and 2,4-diaminotoluene.

Bacterial degradation of xenobiotic compounds is an intense field of research already for decades. Lately, this research is complemented by downstream applications including Next Generation Sequencing (NGS), RT-PCR, qPCR, and RNA-seq. For most of these molecular applications, high-quality RNA is a fundamental necessity. However, during the degradation of aromatic substrates, phenolic or polyphenolic compounds such as polycatechols are formed and interact irreversibly with nucleic acids, making RNA extraction from these sources a major challenge. Therefore, we established a method for total RNA extraction from the aromatic degrading Pseudomonas capeferrum TDA1 based on RNAzol® RT, glycogen and a final cleaning step. It yields a high-quality RNA from cells grown on TDA1 and on phenol compared to standard assays conducted in the study. To our knowledge, this is the first report tackling the problem of polyphenolic compound interference with total RNA isolation in bacteria. It might be considered as a guideline to improve total RNA extraction from other bacterial species.

Towards robust Pseudomonas cell factories to harbour novel biosynthetic pathways.

Biotechnological production in bacteria enables access to numerous valuable chemical compounds. Nowadays, advanced molecular genetic toolsets, enzyme engineering as well as the combinatorial use of biocatalysts, pathways, and circuits even bring new-to-nature compounds within reach. However, the associated substrates and biosynthetic products often cause severe chemical stress to the bacterial hosts. Species of the Pseudomonas clade thus represent especially valuable chassis as they are endowed with multiple stress response mechanisms, which allow them to cope with a variety of harmful chemicals. A built-in cell envelope stress response enables fast adaptations that sustain membrane integrity under adverse conditions. Further, effective export machineries can prevent intracellular accumulation of diverse harmful compounds. Finally, toxic chemicals such as reactive aldehydes can be eliminated by oxidation and stress-induced damage can be recovered. Exploiting and engineering these features will be essential to support an effective production of natural compounds and new chemicals. In this article, we therefore discuss major resistance strategies of Pseudomonads along with approaches pursued for their targeted exploitation and engineering in a biotechnological context. We further highlight strategies for the identification of yet unknown tolerance-associated genes and their utilisation for engineering next-generation chassis and finally discuss effective measures for pathway fine-tuning to establish stable cell factories for the effective production of natural compounds and novel biochemicals.

Viability and stress state of bacteria associated with primary production or zooplankton-derived suspended particulate matter in summer along a transect in Baffin Bay (Arctic Ocean).

In the framework of the GreenEdge Project (whose the general objective is to understand the dynamic of the phytoplankton spring bloom in Arctic Ocean), lipid composition and viability and stress state of bacteria were monitored in sea ice and suspended particulate matter (SPM) samples collected in 2016 along a transect from sea ice to open water in Baffin Bay (Arctic Ocean). Lipid analyses confirmed the dominance of diatoms in the bottommost layer of ice and suggested (i) the presence of a strong proportion of micro-zooplankton in SPM samples collected at the western ice covered St 403 and St 409 and (ii) a high proportion of macro-zooplankton (copepods) in SPM samples collected at the eastern ice covered St 413 and open water St 418. The use of the propidium monoazide (PMA) method allowed to show a high bacterial mortality in sea ice and in SPM material collected in shallower waters at St 409 and St 418. This mortality was attributed to the release of bactericidal free fatty acids by sympagic diatoms under the effect of light stress. A strong cis-trans isomerization of bacterial MUFAs was observed in the deeper SPM samples collected at the St 403 and St 409. It was attributed to the ingestion of bacteria stressed by salinity in brine channels of ice by sympagic bacterivorous microzooplankton (ciliates) incorporating trans fatty acids of their preys before to be released in the water column during melting. The high trans/cis ratios also observed in SPM samples collected in the shallower waters at St 413 and St 418 suggest the presence of positively or neutrally buoyant extracellular polymeric substances (EPS)-rich particles retained in sea ice and discharged (with bacteria stressed by salinity) in seawater after the initial release of algal biomass. Such EPS particles, which are generally considered as ideal vectors for bacterial horizontal distribution in the Arctic, appeared to contain a high proportion of dead and non-growing bacteria.

Screening and cultivating microbial strains able to grow on building blocks of polyurethane.

The diverse benefits of synthetic polymers is overshadowed by the amount of plastic waste and its whereabouts. The problem can only be tackled by reducing and recycling of plastics. In this respect, investigating the (microbial) degradation of each type of polymer currently used may provide further understanding that fosters the development of new feasible recycling technologies. Here, we present a strategy to isolate bacteria from environmental samples that are able to degrade hydrolysis products and building blocks of polyurethane (PUR). Protocols are presented to enrich bacteria on the primary diamines 2,4-diaminotoluene (TDA) and 4,4'-diaminodiphenylmethane (MDA) as well as an oligomeric PUR (Sigma Aldrich, proprietary composition). For TDA and the oligomeric PUR, methods are suggested to monitor their concentration in bacterial enrichment cultures.

Genetic Cell-Surface Modification for Optimized Foam Fractionation.

Rhamnolipids are among the glycolipids that have been investigated intensively in the last decades, mostly produced by the facultative pathogen Pseudomonas aeruginosa using plant oils as carbon source and antifoam agent. Simplification of downstream processing is envisaged using hydrophilic carbon sources, such as glucose, employing recombinant non-pathogenic Pseudomonas putida KT2440 for rhamnolipid or 3-(3-hydroxyalkanoyloxy)alkanoic acid (HAA, i.e., rhamnolipid precursors) production. However, during scale-up of the cultivation from shake flask to bioreactor, excessive foam formation hinders the use of standard fermentation protocols. In this study, the foam was guided from the reactor to a foam fractionation column to separate biosurfactants from medium and bacterial cells. Applying this integrated unit operation, the space-time yield (STY) for rhamnolipid synthesis could be increased by a factor of 2.8 (STY = 0.17 gRL/L·h) compared to the production in shake flasks. The accumulation of bacteria at the gas-liquid interface of the foam resulted in removal of whole-cell biocatalyst from the reactor with the strong consequence of reduced rhamnolipid production. To diminish the accumulation of bacteria at the gas-liquid interface, we deleted genes encoding cell-surface structures, focusing on hydrophobic proteins present on P. putida KT2440. Strains lacking, e.g., the flagellum, fimbriae, exopolysaccharides, and specific surface proteins, were tested for cell surface hydrophobicity and foam adsorption. Without flagellum or the large adhesion protein F (LapF), foam enrichment of these modified P. putida KT2440 was reduced by 23 and 51%, respectively. In a bioreactor cultivation of the non-motile strain with integrated rhamnolipid production genes, biomass enrichment in the foam was reduced by 46% compared to the reference strain. The intensification of rhamnolipid production from hydrophilic carbon sources presented here is an example for integrated strain and process engineering. This approach will become routine in the development of whole-cell catalysts for the envisaged bioeconomy. The results are discussed in the context of the importance of interacting strain and process engineering early in the development of bioprocesses.

Increasing ibuprofen degradation in constructed wetlands by bioaugmentation with gravel containing biofilms of an ibuprofen-degrading Sphingobium yanoikuyae.

The aim of this study was to investigate the removal of ibuprofen in laboratory scale constructed wetlands. Four (planted and unplanted) laboratory-scale horizontal subsurface flow constructed wetlands were supplemented with ibuprofen in order to elucidate (i) the role of plants on ibuprofen removal and (ii) to evaluate the removal performance of a bioaugmented lab scale wetland. The planted systems showed higher ibuprofen removal efficiency than an unplanted one. The system planted with Juncus effusus was found to have a higher removal rate than the system planted with Phalaris arundinacea. The highest removal rate of ibuprofen was found after inoculation of gravel previously loaded with a newly isolated ibuprofen-degrading bacterium identified as Sphingobium yanoikuyae. This experiment showed that more than 80 days of CW community adaptation for ibuprofen treatment could be superseded by bioaugmentation with this bacterial isolate.

In vitro and in vivo lipidomics as a tool for probiotics evaluation.

The probiotic bacteria are helpful for nutritional and therapeutic purposes, and they are commercially available in various forms, such as capsules or powders. Increasing pieces of evidence indicate that different growth conditions and variability in manufacturing processes can determine the properties of probiotic products. In recent years, the lipidomic approach has become a useful tool to evaluate the impact that probiotics induce in host physiology. In this work, two probiotic formulations with identical species composition, produced in two different sites, the USA and Italy, were utilized to feed Caenorhabditis elegans, strains and alterations in lipid composition in the host and bacteria were investigated. Indeed, the multicellular organism C. elegans is considered a simple model to study the in vivo effects of probiotics. Nematodes fat metabolism was assessed by gene expression analysis and by mass spectrometry-based lipidomics. Lipid droplet analysis revealed a high accumulation of lipid droplets in worms fed US-made products, correlating with an increased expression of genes involved in the fatty acid synthesis. We also evaluated the lifespan of worms defective in genes involved in the insulin/IGF-1-mediated pathway and monitored the nuclear translocation of DAF-16. These data demonstrated the involvement of the signaling in C. elegans responses to the two diets. Lipidomics analysis of the two formulations was also conducted, and the results indicated differences in phosphatidylglycerol (PG) and phosphatidylcholine (PC) contents that, in turn, could influence nematode host physiology. Results demonstrated that different manufacturing processes could influence probiotics and host properties in terms of lipid composition. KEY POINTS: • Probiotic formulations impact on Caenorhabditis elegans lipid metabolism; • Lipidomic analysis highlighted phospholipid abundance in the two products; • Phosphocholines and phosphatidylglycerols were analyzed in worms fed the two probiotic formulations.