ABSTRACT
The behavioral avoidance test (BAT) is a well-known diagnostic tool assessing fear by directly measuring avoidance behavior. For instance, in spider phobia, participants or patients gradually approach a live spider until they feel too uncomfortable to continue. However, the use of different BAT protocols in various studies hampers the comparability of results. Moreover, conducting the test requires considerable preparation by researchers and clinicians. Thus, we have developed an open-access online BAT (vBATon). We validated its efficacy in measuring avoidance behavior and eliciting feelings of anxiety and disgust by comparing it to a real-life BAT (rl-BAT). Spider-fearful (N = 31) and nonfearful (N = 31) individuals completed a rl-BAT and vBATon on two separate dates within a 1-week interval. As expected, both tests successfully distinguished between spider-fearful and nonfearful individuals. Crucially, equivalence tests confirmed that vBATon captures avoidance behavior, anxiety, and disgust equal to the rl-BAT. Assessing validity, we found moderate to high correlations between vBATon and (a) the rl-BAT and (b) self-report measurements of spider fear (Spider Phobia Questionnaire, Fear of Spiders Questionnaire). Overall, our study displayed initial evidence of validity of vBATon and suggests that it is a standardized, efficient, and user-friendly alternative to rl-BATs for measuring spider fear. It can be utilized in both research and clinical practice. (PsycInfo Database Record (c) 2024 APA, all rights reserved).
Subject(s)
Avoidance Learning , Fear , Phobic Disorders , Spiders , Humans , Phobic Disorders/psychology , Phobic Disorders/diagnosis , Female , Adult , Male , Fear/psychology , Young Adult , Animals , Reproducibility of Results , Anxiety/psychology , Anxiety/diagnosis , Disgust , Psychometrics , Internet , AdolescentABSTRACT
BACKGROUND: Contagious caprine pleuropneumonia (CCPP) is a fatal WOAH-listed, respiratory disease in small ruminants with goats as primary hosts that is caused by Mycoplasma capricolum subspecies capripneumoniae (Mccp). Twelve CCPP outbreaks were investigated in 11 goat herds and a herd of captive Arabian sand gazelle (Gazella marica) in four Omani governorates by clinical pathological and molecular analysis to compare disease manifestation and Mccp genetic profiles in goats and wild ungulates. RESULTS: The CCPP forms in diseased and necropsied goats varied from peracute (5.8%), acute (79.2%) and chronic (4.5%) while all of the five necropsied gazelles showed the acute form based on the clinical picture, gross and histopathological evaluation. Colonies of Mccp were recovered from cultured pleural fluid, but not from lung tissue samples of one gazelle and nine goats and all the isolates were confirmed by Mccp-specific real time PCR. Whole genome-single nucleotide polymorphism (SNP) analysis was performed on the ten isolates sequenced in this study and twenty sequences retrieved from the Genbank database. The Mccp strains from Oman clustered all in phylogroup A together with strains from East Africa and one strain from Qatar. A low variability of around 125 SNPs was seen in the investigated Omani isolates from both goats and gazelles indicating mutual transmission of the pathogen between wildlife and goats. CONCLUSION: Recent outbreaks of CCPP in Northern Oman are caused by Mccp strains of the East African Phylogroup A which can infect goats and captive gazelles likewise. Therefore, wild and captive ungulates should be considered as reservoirs and included in CCPP surveillance measures.
Subject(s)
Antelopes , Disease Outbreaks , Goat Diseases , Goats , Mycoplasma capricolum , Pleuropneumonia, Contagious , Animals , Goat Diseases/epidemiology , Goat Diseases/microbiology , Pleuropneumonia, Contagious/epidemiology , Pleuropneumonia, Contagious/microbiology , Oman/epidemiology , Mycoplasma capricolum/genetics , Disease Outbreaks/veterinary , Polymorphism, Single Nucleotide , Molecular Epidemiology , PhylogenyABSTRACT
Antimicrobial resistance (AMR) is considered one of the greatest threats to both human and animal health. Efforts to address AMR include implementing antimicrobial stewardship programs and introducing alternative treatment options. Nevertheless, effective treatment of infectious diseases caused by bacteria will still require the identification and development of new antimicrobial agents. Eight different natural products were tested for antimicrobial activity against seven pathogenic bacterial species (Brachyspira sp., Chlamydia sp., Clostridioides sp., Mannheimia sp., Mycobacterium sp., Mycoplasma sp., Pasteurella sp.). In a first pre-screening, most compounds (five out of eight) inhibited bacterial growth only at high concentrations, but three natural products (celastramycin A [CA], closthioamide [CT], maduranic acid [MA]) displayed activity at concentrations <2 µg/mL against Pasteurella sp. and two of them (CA and CT) also against Mannheimia sp. Those results were confirmed by testing a larger collection of isolates encompassing 64 Pasteurella and 56 Mannheimia field isolates originating from pigs or cattle, which yielded MIC90 values of 0.5, 0.5, and 2 µg/mL against Pasteurella and 0.5, 4, and >16 µg/mL against Mannheimia for CA, CT, and MA, respectively. CA, CT, and MA exhibited higher MIC50 and MIC90 values against Pasteurella isolates with a known AMR phenotype against commonly used therapeutic antimicrobial agents than against isolates with unknown AMR profiles. This study demonstrates the importance of whole-cell antibacterial screening of natural products to identify promising scaffolds with broad- or narrow-spectrum antimicrobial activity against important Gram-negative veterinary pathogens with zoonotic potential.
ABSTRACT
Mycoplasma mycoides ssp. capri (Mmc) is one of the etiological microorganisms of contagious agalactia, which is among the diseases causing the highest economical losses in small ruminants. We report a disease outbreak in a German flock that led to significant suffering of goats characterized by mastitis, arthritis, pleuropneumonia and sudden deaths. Mmc was persistently isolated from many animals both from milk, and from a number of different swab and tissue samples. A number of closely related Mycoplasma spp. have to be taken into consideration to rule out important animal epizootics listed by European Animal Health Law and the World Organisation for Animal Health (WOAH). Some goats developed cross-reacting antibodies against Mycoplasma mycoides ssp. mycoides. Although Mmc is believed to be an uncommon microorganism in Germany, this study highlights that veterinarians should consider this pathogen in their work during herd health monitoring in Central Europe. Although eradication was not fully achieved, autogenous vaccination significantly seemed to improve animal health and welfare.
Subject(s)
Goat Diseases , Mastitis , Mycoplasma Infections , Mycoplasma mycoides , Mycoplasma , Pleuropneumonia, Contagious , Female , Animals , Goats , Mycoplasma Infections/epidemiology , Mycoplasma Infections/veterinary , Pleuropneumonia, Contagious/epidemiology , Mastitis/epidemiology , Mastitis/veterinary , Goat Diseases/epidemiologyABSTRACT
Mycoplasmopsis (M.) bovis, the agent of mastitis, pneumonia, and arthritis in cattle, harbors a small genome of approximately 1 Mbp. Combining data from Illumina and Nanopore technologies, we sequenced and assembled the genomes of 35 European strains and isolate DL422_88 from Cuba. While the high proportion of repetitive structures in M. bovis genomes represent a particular challenge, implementation of our own pipeline Mycovista (available on GitHub www.github.com/sandraTriebel/mycovista ) in a hybrid approach enabled contiguous assembly of the genomes and, consequently, improved annotation rates considerably. To put our European strain panel in a global context, we analyzed the new genome sequences together with 175 genome assemblies from public databases. Construction of a phylogenetic tree based on core genes of these 219 strains revealed a clustering pattern according to geographical origin, with European isolates positioned on clades 4 and 5. Genomic data allowing assignment of strains to tissue specificity or certain disease manifestations could not be identified. Seven strains isolated from cattle with systemic circular condition (SCC), still a largely unknown manifestation of M. bovis disease, were located on both clades 4 and 5. Pairwise association analysis revealed 108 genomic elements associated with a particular clade of the phylogenetic tree. Further analyzing these hits, 25 genes are functionally annotated and could be linked to a M. bovis protein, e.g. various proteases and nucleases, as well as ten variable surface lipoproteins (Vsps) and other surface proteins. These clade-specific genes could serve as useful markers in epidemiological and clinical surveys.
Subject(s)
Genomics , Mycoplasma bovis , Female , Animals , Cattle , Phylogeny , Cluster Analysis , Databases, Factual , Endonucleases , Mycoplasma bovis/geneticsABSTRACT
Bacterial pathogen-host interactions are a complex process starting with adherence and colonization followed by a variety of interactions such as invasion or cytotoxicity on one hand and pathogen recognition, secretion of proinflammatory/antibacterial substances and enhancing the barrier function of epithelial layers on the other hand. Therefore, a variety of in vitro, ex vivo and in vivo models have been established to investigate these interactions. Some in vitro models are composed of different cell types and extracellular matrices such as tissue explants or precision cut lung slices. These complex in vitro models mimic the in vivo situation more realistically, however, they often require new and more sophisticated methods for quantification of experimental results. Here we describe a multiplex qPCR-based method to quantify the number of bacteria of Mycoplasma (M.) mycoides interacting with their hosts in an absolute manner as well as normalized to the number of host cells. We choose the adenylate kinase (adk) gene from the pathogen and the Carcinoembryonic antigen-related cell adhesion molecule 18 (CEACAM18) gene from the host to determine cell numbers by a TaqMan-based assay system. Absolute copy numbers of the genes are calculated according to a standard containing a defined number of plasmids containing the sequence which is amplified by the qPCR. The new multiplex qPCR therefore allows the quantification of M. mycoides interacting with host cells in suspension, monolayer, 3D cell culture systems as well as in host tissues.
Subject(s)
Cattle Diseases , Mycoplasma mycoides , Mycoplasma , Animals , Cattle , Mycoplasma mycoides/genetics , Mycoplasma mycoides/metabolism , Mycoplasma/genetics , Lung/microbiology , Cell Culture Techniques , Cattle Diseases/microbiologyABSTRACT
In the original publication [...].
ABSTRACT
OBJECTIVES: In this early retrospective cohort study, a total of 26 patients with SARS-CoV-2 were treated with bamlanivimab or casirivimab/imdevimab, and the reduction of the viral load associated with the developed clinical symptoms was analyzed. METHODS: Patients in the intervention groups received bamlanivimab or casirivimab/imdevimab. Patients without treatment served as control. Outcomes were assessed by clinical symptoms and change in log viral load from baseline based on the cycle threshold over a period of 18 days. RESULTS: Median log viral load decline was higher in both intervention groups after 3 and 6 days compared to control. However, at later time points, the decline of the viral load was more distinct in the control group. Mild symptoms of COVID-19 were observed in 6.3% of the intervention groups and in no patient of the control. No patients treated with bamlanivimab, 18.8% treated with casirivimab/imdevimab, and 14.2% in the control group developed moderate symptoms. Severe symptoms were recorded only in the control group (14.2%), including one related death. CONCLUSION: Treatment with monoclonal SARS-CoV-2 antibodies seems to accelerate decline of virus loads, especially in the first 6 days after administration, compared to control. This may be associated with a reduced likeliness of a severe course of COVID-19.
Subject(s)
COVID-19 , SARS-CoV-2 , Humans , Retrospective Studies , Antibodies, NeutralizingABSTRACT
OBJECTIVE: Are diets with a greater environmental impact less healthy? This is a key question for nutrition policy, but previous research does not provide a clear answer. To address this, our objective here was to test whether American diets with the highest carbon footprints predicted greater population-level mortality from diet-related chronic disease than those with the lowest. DESIGN: Baseline dietary recall data were combined with a database of greenhouse gases emitted in the production of foods to estimate a carbon footprint for each diet. Diets were ranked on their carbon footprints and those in the highest and lowest quintiles were studied here. Preventable Risk Integrated Model (PRIME), an epidemiological modelling software, was used to assess CVD and cancer mortality for a simulated dietary change from the highest to the lowest impact diets. The diet-mortality relationships used by PRIME came from published meta-analyses of randomised controlled trials and prospective cohort studies. SETTING: USA. PARTICIPANTS: Baseline diets came from adults (n 12 865) in the nationally representative 2005-2010 National Health and Nutrition Examination Survey. RESULTS: A simulated change at the population level from the highest to the lowest carbon footprint diets resulted in 23 739 (95 % CI 20 349, 27 065) fewer annual deaths from CVD and cancer. This represents a 1·83 % (95 % CI 1·57 %, 2·08 %) decrease in total deaths. About 95 % of deaths averted were from CVD. CONCLUSIONS: Diets with the highest carbon footprints were associated with a greater risk of mortality than the lowest, suggesting that dietary guidance could incorporate sustainability information to reinforce health messaging.
ABSTRACT
Fetal calf serum (FCS) is used for in vitro cell culture, as it provides the cells with various growth-promoting compounds. For applications in humans, FCS does not meet the required safety standards and should be replaced by an appropriate substitute. This study analyzed the suitability of using human platelet lysate (hPL) as a substitute for FCS in endothelial cell cultures for in vitro and in vivo tissue engineering applications. The focus was placed on standardized, commercially available hPLs (MultiPL'30, MultiPL'100), which are approved for applications in humans, and compared to laboratory-prepared hPLs (lp-hLP). Human umbilical vein endothelial cells (HUVEC) were cultured with FCS or with different hPLs. Cell morphology, proliferation, viability, apoptosis, and necrosis, as well as the organization of vascular structures, were assessed. No morphological changes were noticed when FCS was replaced by standardized hPLs in concentrations of 1-10%. In contrast, the use of lp-hLPs led to irregular cell shape and increased vacuolization of the cytoplasm. HUVEC proliferation and viability were not compromised by using media supplemented with standardized hPLs or pl-hPLs in concentrations of 1-10%, compared to cells grown in media supplemented with 20% FCS. The apoptosis rate using lp-hPLs was higher compared to the use of standardized hPLs. The necrosis rate tended to be lower when FCS was replaced by hPLs. HUVEC formed more pronounced capillary-like structures when the media were supplemented with hPLs instead of supplementation with FCS. Thus, compared to the use of FCS, the use of hPLs was beneficial for the growth and optimal expression of functional endothelial cell characteristics during in vitro experiments. Commercially available hPLs proved to be particularly suitable, as they led to reproducible results during in vitro experiments, while meeting the safety requirements for in vivo use.
Subject(s)
Serum Albumin, Bovine , Tissue Engineering , Blood Platelets/metabolism , Cell Culture Techniques , Cell Differentiation , Cell Proliferation , Cells, Cultured , Culture Media/metabolism , Endothelial Cells/metabolism , Humans , Necrosis/metabolismABSTRACT
BACKGROUND: Human food systems substantially affect the environment, but the impacts vary widely by food. Guidance to individuals to reduce their dietary impacts would benefit from easy advice, but little is known about the specific population impacts of simple changes on self-selected diets. OBJECTIVES: The objective was to estimate the potential impact of a single dietary substitution on the carbon and water scarcity footprints of self-selected diets in the United States. METHODS: This cross-sectional modeling study used 24-h dietary recall data from the 2005-2010 waves of the NHANES. Greenhouse gas emissions (GHGE) in the production of foods as well as irrigated water use, characterized by its relative scarcity at production locations, were matched to all foods in the recalls using previously developed databases. Impacts were summed to create carbon and water scarcity footprints for diets (n = 16,800) of adults aged >18 y. Diet quality was assessed using the Healthy Eating Index (HEI). Foods with the highest impact on GHGE and selected additional foods were substituted for calorically equivalent, less impactful items. Footprints were calculated before and after these hypothetical substitutions. RESULTS: The highest impact foods were all beef items, and 19.8% of individuals consumed them (n = 3320). After substitution of these items with poultry or pork, the mean carbon and water scarcity footprints among those with substitutions significantly decreased (P < 0.001) by 48.4 ± 0.6% and 29.9 ± 0.4%, respectively. Across the entire sample, these represented mean reductions of 9.6 ± 0.3% and 5.9 ± 0.2%, respectively. The mean HEI after substitutions was 3.6 ± 0.1% higher than before (P < 0.001). None of the selected additional foods had population impacts as large as the beef substitutions. CONCLUSIONS: Simple substitutions can be made in individuals' diets to substantially reduce their carbon and water scarcity footprints without sacrificing dietary quality. Such substitutions may be easier to promote than complex dietary patterns.
Subject(s)
Carbon Footprint/statistics & numerical data , Diet, Healthy/statistics & numerical data , Food Supply/statistics & numerical data , Greenhouse Gases/analysis , Water Insecurity , Adolescent , Adult , Cross-Sectional Studies , Energy Intake , Female , Food Handling , Humans , Male , Middle Aged , Nutrition Surveys , United States , Young AdultABSTRACT
Shifting consumer behavior towards more sustainable diets can benefit environmental sustainability and human health. Although more frequent home cooking is associated with a better diet quality and fast-food consumption with worse diet quality, the environmental impact of diets based on frequency of cooking or eating fast food is not well understood. The objective of this study was to investigate whether the frequency of cooking dinner at home or eating fast food is associated with dietary greenhouse gas emissions (GHGE). We linked 24-h dietary recall data from adult respondents in the 2007-2010 National Health and Nutrition Examination Survey (NHANES) (N = 11,469) to a database of GHGE factors to obtain a measure of dietary GHGE (kgCO2-eq/2000 kcal) (the sum of emissions released in the production of food for an individual's diet), adjusted by energy intake (kgCO2-eq/2000 kcal). We examined associations between frequency of cooking dinner (the only meal for which cooking frequency was measured), frequency of eating fast food, and dietary GHGE and protein sources (beef, pork, poultry, other meat, and fish and seafood (g/2000 kcal)) using generalized linearized regression models that controlled for age, sex, and other socio-economic characteristics. Greater cooking frequency was associated with higher dietary GHGE. In fully adjusted models, cooking 5-6 times/week was associated with an additional 0.058 kgCO2-eq/2000 kcal (SE 0.033) and cooking 7 times/week was associated with an additional 0.057 kgCO2-eq/2000 kcal (SE 0.027) when compared to cooking 0-2 times/week. Individuals in households who cooked dinner more frequently consumed significantly more meat, poultry, and fish (cooking 7 times/week: 148.7 g/2000 kcal vs. cooking 0-2 times/week: 135.4 g/2000 kcal, p-trend = 0.005), which could explain the association with a higher carbon footprint diet. There were few associations of note between fast-food frequency and GHGE. Policies and interventions that reduce consumption of meat and increase consumption of plants when both cooking meals at home and eating meals out are needed to shift toward diets that will be beneficial for both human health and the health of the planet.
Subject(s)
Carbon Footprint , Fast Foods , Animals , Cattle , Cooking , Cross-Sectional Studies , Diet , Feeding Behavior , Humans , Meat , Nutrition SurveysABSTRACT
Due to the nonlinear material behavior and contradicting application requirements, the selection of a specific electrical steel grade for a highly efficient electrical machine during its design stage is challenging. With sufficient knowledge of the correlations between material and magnetic properties and capable material models, a material design for specific requirements can be enabled. In this work, the correlations between magnetization behavior, iron loss and the most relevant material parameters for non-oriented electrical steels, i.e., alloying, sheet thickness and grain size, are studied on laboratory-produced iron-based electrical steels of 2.4 and 3.2 wt % silicon. Different final thicknesses and grain sizes for both alloys are obtained by different production parameters to produce a total of 21 final material states, which are characterized by state-of-the-art material characterization methods. The magnetic properties are measured on a single sheet tester, quantified up to 5 kHz and used to parametrize the semi-physical IEM loss model. From the loss parameters, a tailor-made material, marked by its thickness and grain size is deduced. The influence of different steel grades and the chance of tailor-made material design is discussed in the context of an exemplary e-mobility application by performing finite-element electrical machine simulations and post-processing on four of the twenty-one materials and the tailor-made material. It is shown that thicker materials can lead to fewer iron losses if the alloying and grain size are adapted and that the three studied parameters are in fact levers for material design where resources can be saved by a targeted optimization.
ABSTRACT
A tailor-made microstructure, especially regarding grain size and texture, improves the magnetic properties of non-oriented electrical steels. One way to adjust the microstructure is to control the production and processing in great detail. Simulation and modeling approaches can help to evaluate the impact of different process parameters and finally select them appropriately. We present individual model approaches for hot rolling, cold rolling, annealing and shear cutting and aim to connect the models to account for the complex interrelationships between the process steps. A layer model combined with a microstructure model describes the grain size evolution during hot rolling. The crystal plasticity finite-element method (CPFEM) predicts the cold-rolling texture. Grain size and texture evolution during annealing is captured by the level-set method and the heat treatment model GraGLeS2D+. The impact of different grain sizes across the sheet thickness on residual stress state is evaluated by the surface model. All models take heterogeneous microstructures across the sheet thickness into account. Furthermore, a relationship is established between process and material parameters and magnetic properties. The basic mathematical principles of the models are explained and demonstrated using laboratory experiments on a non-oriented electrical steel with 3.16 wt.% Si as an example.
ABSTRACT
The magnetic properties of non-oriented electrical steel, widely used in electric machines, are closely related to the grain size and texture of the material. How to control the evolution of grain size and texture through processing in order to improve the magnetic properties is the research focus of this article. Therefore, the complete process chain of a non-oriented electrical steel with 3.2 wt.-% Si was studied with regard to hot rolling, cold rolling, and final annealing on laboratory scale. Through a comprehensive analysis of the process chain, the influence of important process parameters on the grain size and texture evolution as well as the magnetic properties was determined. It was found that furnace cooling after the last hot rolling pass led to a fully recrystallized grain structure with the favorable ND-rotated-cube component, and a large portion of this component was retained in the thin strip after cold rolling, resulting in a texture with a low γ-fiber and a high ND-cube component after final annealing at moderate to high temperatures. These promising results on a laboratory scale can be regarded as an effective way to control the processing on an industrial scale, to finally tailor the magnetic properties of non-oriented electrical steel according to their final application.
ABSTRACT
Non-oriented electrical steel sheets are applied as a core material in rotors and stators of electric machines in order to guide and magnify their magnetic flux density. Their contouring is often realized in a blanking process step, which results in plastic deformation of the cut edges and thus deteriorates the magnetic properties of the base material. This work evaluates the influence of the material's grain size on its iron losses after the blanking process. Samples for the single sheet test were blanked at different cutting clearances (15 µm-70 µm) from sheets with identical chemical composition (3.2 wt.% Si) but varying average grain size (28 µm-210 µm) and thickness (0.25 mm and 0.5 mm). Additionally, in situ measurements of blanking force and punch travel were carried out. Results show that blanking-related iron losses either increase for 0.25 mm thick sheets or decrease for 0.5 mm thick sheets with increasing grain size. Although this is partly in contradiction to previous research, it can be explained by the interplay of dislocation annihilation and transgranular fracturing. The paper thus contributes to a deeper understanding of the blanking process of coarse-grained, thin electrical steel sheets.
ABSTRACT
Mycoplasmas are minute bacteria controlled by very small genomes ranging from 0.6 to 1.4 Mbp. They encompass several important medical and veterinary pathogens that are often associated with a wide range of chronic diseases. The long persistence of mycoplasma cells in their hosts can exacerbate the spread of antimicrobial resistance observed for many species. However, the nature of the virulence factors driving this phenomenon in mycoplasmas is still unclear. Toxin-antitoxin systems (TA systems) are genetic elements widespread in many bacteria that were historically associated with bacterial persistence. Their presence on mycoplasma genomes has never been carefully assessed, especially for pathogenic species. Here we investigated three candidate TA systems in M. mycoides subsp. capri encoding a (i) novel AAA-ATPase/subtilisin-like serine protease module, (ii) a putative AbiEii/AbiEi pair and (iii) a putative Fic/RelB pair. We sequence analyzed fourteen genomes of M. mycoides subsp. capri and confirmed the presence of at least one TA module in each of them. Interestingly, horizontal gene transfer signatures were also found in several genomic loci containing TA systems for several mycoplasma species. Transcriptomic and proteomic data confirmed differential expression profiles of these TA systems during mycoplasma growth in vitro. While the use of heterologous expression systems based on E. coli and B. subtilis showed clear limitations, the functionality and neutralization capacities of all three candidate TA systems were successfully confirmed using M. capricolum subsp. capricolum as a host. Additionally, M. capricolum subsp. capricolum was used to confirm the presence of functional TA system homologs in mycoplasmas of the Hominis and Pneumoniae phylogenetic groups. Finally, we showed that several of these M. mycoides subsp. capri toxins tested in this study, and particularly the subtilisin-like serine protease, could be used to establish a kill switch in mycoplasmas for industrial applications.
Subject(s)
Mycoplasma/genetics , Mycoplasma/metabolism , Toxin-Antitoxin Systems/genetics , Animals , Bacteria/genetics , Bacteria/metabolism , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Goats/microbiology , Phylogeny , Proteomics/methods , Transcriptome/geneticsABSTRACT
BACKGROUND: Porous polyethylene (PPE) implants are used for the reconstruction of tissue defects but have a risk of rejection in case of insufficient ingrowth into the host tissue. Various growth factors can promote implant ingrowth, yet a long-term gradient is a prerequisite for the mediation of these effects. As modification of the implant surface with nanocarriers may facilitate a long-term gradient by sustained factor release, implants modified with crosslinked albumin nanocarriers were evaluated in vivo. METHODS: Nanocarriers from murine serum albumin (MSA) were prepared by an inverse miniemulsion technique encapsulating either a low- or high-molar mass fluorescent cargo. PPE implants were subsequently coated with these nanocarriers. In control cohorts, the implant was coated with the homologue non-encapsulated cargo substance by dip coating. Implants were consequently analyzed in vivo using repetitive fluorescence microscopy utilizing the dorsal skinfold chamber in mice for ten days post implantation. RESULTS: Implant-modification with MSA nanocarriers significantly prolonged the presence of the encapsulated small molecules while macromolecules were detectable during the investigated timeframe regardless of the form of application. CONCLUSIONS: Surface modification of PPE implants with MSA nanocarriers results in the alternation of release kinetics especially when small molecular substances are used and therefore allows a prolonged factor release for the promotion of implant integration.
ABSTRACT
BACKGROUND: Do the environmental impacts inherent in national food-based dietary guidelines (FBDG) vary around the world, and, if so, how? Most previous studies that consider this question focus on a single country or compare countries' guidelines without controlling for differences in country-level consumption patterns. To address this gap, we model the carbon footprint of the dietary guidelines from seven different countries, examine the key contributors to this, and control for consumption differences between countries. METHODS: In this purposive sample, we obtained FBDG from national sources for Germany, India, the Netherlands, Oman, Thailand, Uruguay, and the United States. These were used to structure recommended diets using 6 food groups: protein foods, dairy, grains, fruits, vegetables, and oils/fats. To determine specific quantities of individual foods within these groups, we used data on food supplies available for human consumption for each country from the UN Food and Agriculture Organization's food balance sheets. The greenhouse gas emissions (GHGE) used to produce the foods in these consumption patterns were linked from our own database, constructed from an exhaustive review of the life cycle assessment literature. All guidelines were scaled to a 2000-kcal diet. RESULTS: Daily recommended amounts of dairy foods ranged from a low of 118 ml/d for Oman to a high of 710 ml/d for the US. The GHGE associated with these two recommendations were 0.17 and 1.10 kg CO2-eq/d, respectively. The GHGE associated with the protein food recommendations ranged from 0.03 kg CO2-eq/d in India to 1.84 kg CO2-eq/d in the US, for recommended amounts of 75 g/d and 156 g/d, respectively. Overall, US recommendations had the highest carbon footprint at 3.83 kg CO2-eq/d, 4.5 times that of the recommended diet for India, which had the smallest footprint. After controlling for country-level consumption patterns by applying the US consumption pattern to all countries, US recommendations were still the highest, 19% and 47% higher than those of the Netherlands and Germany, respectively. CONCLUSIONS: Despite our common human biology, FBDG vary tremendously from one country to the next, as do the associated carbon footprints of these guidelines. Understanding the carbon footprints of different recommendations can assist in future decision-making to incorporate environmental sustainability in dietary guidance.
Subject(s)
Carbon Footprint , Food Supply , Nutrition Policy , Diet , Humans , United States , VegetablesABSTRACT
The behaviour of many materials is strongly influenced by the mechanical properties of hard phases, present either from deliberate introduction for reinforcement or as deleterious precipitates. While it is, therefore, self-evident that these phases should be studied, the ability to do so-particularly their plasticity-is hindered by their small sizes and lack of bulk ductility at room temperature. Many researchers have, therefore, turned to small-scale testing in order to suppress brittle fracture and study the deformation mechanisms of complex crystal structures. To characterise the plasticity of a hard and potentially anisotropic crystal, several steps and different nanomechanical testing techniques are involved, in particular nanoindentation and microcompression. The mechanical data can only be interpreted based on imaging and orientation measurements by electron microscopy. Here, we provide a tutorial to guide the collection, analysis, and interpretation of data on plasticity in hard crystals. We provide code collated in our group to help new researchers to analyse their data efficiently from the start. As part of the tutorial, we show how the slip systems and deformation mechanisms in intermetallics such as the Fe7Mo6 µ-phase are discovered, where the large and complex crystal structure precludes determining a priori even the slip planes in these phases. By comparison with other works in the literature, we also aim to identify "best practises" for researchers throughout to aid in the application of the methods to other materials systems.