Noncontact Microfluidics of Highly Viscous Liquids for Accurate Self-Splitting and Pipetting.

Accurate dosing for various liquids, especially for highly viscous liquids, is fundamental in wide-ranging from molecular crosslinking to material processing. Despite droppers or pipettes being widely used as pipetting devices, they are powerless for quantificationally splitting and dosing highly viscous liquids (>100 mPa s) like polymer liquids due to the intertwined macromolecular chains and strong cohesion energy. Here, a highly transparent photopyroelectric slippery (PS) platform is provided to achieve noncontact self-splitting for liquids with viscosity as high as 15 000 mPa s, just with the assistance of sunlight and a cooling source to provide a local temperature difference (ΔT). Moreover, to guarantee the accuracy for pipetting liquids (>80%), the ultrathin MXene film (within a thickness of 20 nm) is self-assembled as the photo-thermal layers, overcoming the trade-off between transparency and photothermal property. Compared with traditional pipetting strategies (≈1.3% accuracy for pipetting polymer liquids), this accurate microfluidic chip shows great potential in adhesive systems (bonding strength, twice than using the droppers or pipettes).

Light-Induced Dynamic Manipulation of Liquid Metal Droplets in the Ambient Atmosphere.

Dynamic manipulation of liquid metal (LM) droplets, a material combining metallicity and fluidity, has recently revealed tremendous potential in developing unconstrained microrobots. LM manipulating techniques based on magnetic fields, electric fields, chemical reactions, and ion concentration gradients in liquid environments have advanced considerably, but dynamic manipulation in air remains a challenge. Herein, a photoresponsive pyroelectric superhydrophobic (PPS) platform is proposed for noncontact, flexible, and controllable manipulation in the ambient atmosphere. The PPS can generate additional free charges when illuminated by light, thus generating the driving force to manipulate liquid metal droplets. By using the synergistic effect of dielectrophoretic and electrostatic forces generated under light navigation, liquid metal droplets can achieve a series of complex motion behaviors, such as climbing slopes, going over steps, avoiding obstacles, crossing mazes, etc. We further extend the light control of liquid metal droplets to robots applied in electronic circuits, including circuit switching robots and circuit welding robots. This light strategy for manipulating liquid metal droplets provides insights into the development of intelligent, responsive interfaces and simultaneously provides possibilities for the application of liquid metals.

Infinite Self-Propulsion of Circularly On/Discharged Droplets.

Self-propulsion of droplets in a controlled and long path at a high-speed is crucial for organic synthesis, pathological diagnosis and programable lab-on-a-chip. To date, extensive efforts have been made to achieve droplet self-propulsion by asymmetric gradient, yet, existing structural, chemical, or charge density gradients can only last for a while (<50 mm). Here, this work designs a symmetrical waved alternating potential (WAP) on a superhydrophobic surface to charge or discharge the droplets during the transport process. By deeply studying the motion mechanisms for neutral droplets and charged droplets, the circularly on/discharged droplets achieve the infinite self-propulsion (>1000 mm) with an ultrahigh velocity of meters per second. In addition, after permutation and combination of two motion styles of the droplets, it can be competent for more interesting work, such as liquid diode and liquid logic gate. Being assembled into a microfluidic chip, the strategy would be applied in chemical synthesis, cell culture, and diagnostic kits.

Photoelectric synergistic anisotropic slippery interface for directional droplets manipulation.

Stimuli-responsive anisotropic slippery surfaces have displayed remarkable performance in directionally manipulating droplet transport behavior. However, most current reported anisotropic slippery materials have been limited to a single response mode, which often fails to satisfy the practical conditions of double or synergetic stimulation in complex environments. Here, an anisotropic photoelectric synergistic responsive paraffin-injected directional oxidized copper foam slippery interface (P/DOC3-S) with a low response threshold is reported. Owing to the fast photoelectric response of P/DOC3-S, the reversible control of the anisotropic sliding behavior of droplets is realized by remotely switching on and off the photoelectric field. Additionally, through optimizing the structure, the response voltage for P/DOC3-S can be reduced to 0.3 V under one sunlight. This work will provide insights into creating new types of smart slippery surfaces, which are potentially useful in microfluidics, directional liquid transportation, the semiconductor industry, and other related fields.

Slippery Graphene-Bridging Liquid Metal Layered Heterostructure Nanocomposite for Stable High-Performance Electromagnetic Interference Shielding.

Gallium-based liquid metal (LM) with intriguing high electrical conductivity and room-temperature fluidity has attracted substantial attention for its potential application in flexible electromagnetic interference (EMI) shielding. However, the EMI shielding performance of the existing LM-based composites is unsatisfying due to the irreconcilable contradiction between high EMI shielding efficiency (SE) and low thickness. In addition, the research on environmentally stable EMI shielding material has become an urgent need due to the increasingly sophisticated application scenarios. Herein, we prepared a reduced graphene oxide (rGO) bridging LM layered heterostructure nanocomposite with the liquid-infused slippery surface (S-rGO/LM), which exhibits an ultrahigh X-band EMI SE of 80 dB at a mere internal thickness of 33 µm, and an extremely high value of 100 dB at an internal thickness of 67 µm. More significantly, protected by the ultrathin (2 µm) yet effective slippery surface, the S-rGO/LM film exhibits exceptional EMI shielding stability (EMI SE stays above 70 dB) after enduring various harsh conditions (harsh chemical environments, extreme operating temperatures, and severe mechanical wearing). Moreover, the S-rGO/LM film also demonstrates satisfying photothermal behavior and excellent Joule heating performance (surface temperature of 179 °C at 1.75 V, thermal response <10 s), which endows it with the capability of anti-icing/de-icing. This work proposes a way to construct an LM-based nanocomposite with reliable high-performance EMI shielding capability, which shows great potential for applications in wearable devices, defense, and aeronautics and astronautics.

Noncontact Charge Shielding Knife for Liquid Microfluidics.

Multibehavioral droplet manipulation in a precise and programmed manner is crucial for stoichiometry, biological virus detection, and intelligent lab-on-a-chip. Apart from fundamental navigation, merging, splitting, and dispensing of the droplets are required for being combined in a microfluidic chip as well. Yet, existing active manipulations including strategies from light to magnetism are arduous to use to split liquids on superwetting surfaces without mass loss and contamination, because of the high cohesion and Coanda effect. Here, we demonstrate a charge shielding mechanism (CSM) for platforms to integrate with a series of functions. In response to attachment of shielding layers from the bottom, the instantaneous and repeatable change of local potential on our platform achieves the desired loss-free manipulation of droplets, with a wide-ranging surface tension from 25.7 mN m-1 to 87.6 mN m-1, functioning as a noncontact air knife to cleave, guide, rotate, and collect reactive monomers on demand. With further refinement of the surface circuit, the droplets, just as the electron, can be programmed to be transported directionally at extremely high speeds of 100 mm s-1. This new generation of microfluidics is expected to be applied in the field of bioanalysis, chemical synthesis, and diagnostic kit.

Photothermal Solid Slippery Surfaces with Rapid Self-Healing, Improved Anti/De-Icing and Excellent Stability.

Icing phenomenon that occurs universally in nature and industry gets a great impact on human life. Over the past decades, extensive efforts have been made for a wide range of anti-icing/deicing surfaces, but the preparation of anti-icing/deicing interfaces that combine stability, rapid self-healing and excellent anti-icing/deicing performance remains a challenge. In this study, a photothermal solid slippery surface with excellent comprehensive performance is prepared by integrating cellulose acetate film, carbon nanotubes with paraffin wax (CCP). Apart from the excellent anti-icing and deicing properties at -17 ± 1.0 °C under 1 sun illumination, the surface can further achieve deicing at temperatures as low as -22 ± 1.0 °C under infrared light. The fabricated surface also exhibits great stability when placed in harsh conditions such as underwater or ultra-low temperature environments for over 30 days. Even when suffering from physical damage, the prepared surface can rapidly self-repair under 1 sun illumination or near-infrared (NIR) illumination within 16.0 ± 1.5 s. Due to the rapid and repeatable self-healing performance, the lubricating properties of the interface material do not deteriorate even after 50 repeated abrasing-repairing cycles. The photothermal solid slippery surface possesses wide-ranging applications and commercial value at high latitude and altitude regions.

Slippery Surface Based on Photoelectric Responsive Nanoporous Composites with Optimal Wettability Region for Droplets' Multifunctional Manipulation.

The development of responsive slippery surfaces is important because of the high demand for such materials in the fields of liquid manipulation on biochips, microfluidics, microreactions, and liquid-harvesting devices. Although great progress has been achieved, the effect of substrate wettability on slippery surfaces stability is overlooked by scientists. In addition, current responsive slippery surfaces generally function utilizing single external stimuli just for imprecisely controlling liquid motion, while advanced intelligences are always expected to be integrated into one smart interface material for widespread multifunctional applications. Therefore, designing slippery surfaces that collaboratively respond to complex external stimuli and possess sophisticated composite function for expanding applications from controlling droplets motion to patterned writing is urgently needed but remains a challenge. Here, a photoelectric cooperative-responsive slippery surface based on ZnO nanoporous composites is demonstrated. First, the effect of composite surface wettability on slippery surface stability is systematically researched and the optimum wettability region for fabricating stable slippery surfaces is determined. Furthermore, controllable droplet motion and patterned writing are realized on the same slippery surfaces under photoelectric cooperative stimuli, and the related response mechanism is also deeply studied. This kind of material has potential applications in biochips, microfluidics, in situ patterning, and water-harvesting systems.

Tough Reversible Adhesion Properties of a Dry Self-Cleaning Biomimetic Surface.

Geckos have one of the world's most efficient reversible adhesion systems. Even walking in dusty conditions, geckos can dislodge up to 80% of contaminants and recover their adhesion capability after walking as few as four steps. Thus far, artificial dry self-cleaning materials inspired by the geckos' hierarchical fibrillar structure have been only able to remove 55% of collected large particle contaminants with 30 steps. Challenges, including low mechanical strength, low stiffness, and short fatigue time keep these materials from being used in practical applications. This study involves the novel fabrication of dry self-cleaning surfaces with a high mechanical performance and an outstanding dry self-cleaning property. Imposing a load-drag-pull process similar to a gecko's foot adhesion process, our biomimetic surfaces could dislodge up to 59% of microparticles (∼8 µm) with as few as five steps. Furthermore, the surface had an excellent screening ability at low temperatures regardless of the surface roughness similarity. The surfaces were also proven to be scratch resistant. The biomimetic surfaces exhibit enhanced dry self-cleaning and mechanical properties and could be promising in applications such as reusable adhesives, biochips, aerospace satellite waste collection, and screening equipment.

Preparation of Polyurethane/Graphite Composite Films with Stable Mechanical Property and Wear Resistance Underwater.

The wear resistance and stable mechanical properties affect the service life of the underwater functional materials to a certain extent. Unfortunately, the current study of underwater functional materials is rarely related to these aspects. Herein, we successfully designed and prepared polyurethane/graphite nanosheet (PU/GN) composite materials, which exhibited excellent wear resistance and stable mechanical properties underwater. The PU/GN composite films were prepared by evaporating a mixed solution of PU and GN on concave hexagonal honeycomb silicon templates. The mechanical properties of the composite films were determined by tensile test, and the wear resistance was evaluated by comparing the surface morphology before and after grind. By adjusting the content of graphite in the composite films, we found that the composite films containing 23 wt% GN had higher tensile strength and superior wear resistance. Moreover, this composite film showed an outstanding stability when expose to water. The impressive results along with simple preparation process made PU/GN composite films had potential applications in robust underwater functional materials.

Temperature-Responsive Anisotropic Slippery Surface for Smart Control of the Droplet Motion.

Development of stimulus-responsive anisotropic slippery surfaces is important because of the high demand for such materials in the field of liquid directional-driven systems. However, current studies in the field of slippery surfaces are mainly conducted to prepare isotropic slippery surfaces. Although we have developed electric-responsive anisotropic slippery surfaces that enable smart control of the droplet motion, there remain challenges for designing temperature-responsive anisotropic slippery surfaces to control the liquid droplet motion on the surface and in the tube. In this work, temperature-responsive anisotropic slippery surfaces have been prepared by using paraffin, a thermo-responsive phase-transition material, as a lubricating fluid and directional porous polystyrene (PS) films as the substrate. The smart regulation of the droplet motion of several liquids on this surface was accomplished by tuning the substrate temperature. The uniqueness of this surface lies in the use of an anisotropic structure and temperature-responsive lubricating fluids to achieve temperature-driven smart control of the anisotropic motion of the droplets. Furthermore, this surface was used to design temperature-driven anisotropic microreactors and to manipulate liquid transfer in tubes. This work advances the understanding of the principles underlying anisotropic slippery surfaces and provides a promising material for applications in the biochip and microreactor system.

Underwater Mechanically Robust Oil-Repellent Materials: Combining Conflicting Properties Using a Heterostructure.

The development of underwater mechanically robust oil-repellent materials is important due to the high demand for these materials with the increase in underwater activities. Based on the previous study, a new strategy is demonstrated to prepare underwater mechanically robust oil-repellent materials by combining conflicting properties using a heterostructure, which has a layered hydrophobic interior structure with a columnar hierarchical micro/nanostructure on the surface and a hydrophilic outer structure. The surface hydrophilic layer imparts underwater superoleophobicity and low oil adhesion to the material, which has oil contact angle of larger than 150° and adhesion of lower than 2.8 µN. The stability of the mechanical properties stemming from the interior hydrophobic-layered structure enables the material to withstand high weight loads underwater. The tensile stress and the hardness of such a heterostructure film after 1 month immersion in seawater and pH solution are in the range from 83.92 ± 8.22 to 86.73 ± 7.8 MPa and from 83.88 ± 6.8 to 86.82 ± 5.64 MPa, respectively, which are superior to any underwater oil-repellent material currently reported.

Wettability with Aggregation-Induced Emission Luminogens.

Aggregation-induced emission luminogens (AIEgens) have become an emerging field since the concept of AIE was proposed in 2001. Recently, AIEgens have attracted considerable attention due to their abnormal non-emissive fluorescent behavior in solution but strongly emissive behavior in the aggregate state. By utilizing the inherent hydrophobicity, AIEgens can be used to monitor the crystal formation and dewetting behavior in the self-assembly process. More importantly, some stimuli-responsive AIE-active surfaces have been successfully fabricated. In this perspective review, we outline the advances of surface wettability of AIEgens and its applications.

Multiphase Media Antiadhesive Coatings: Hierarchical Self-Assembled Porous Materials Generated Using Breath Figure Patterns.

The cleaning of interface pollutants typically consumes a large amount of energy. Therefore, the development of multiphase media antiadhesive materials is urgently required to meet the demand of energy savings and environmental protection. In this study, the antiadhesive properties toward several liquid droplets and bubbles in multiple media are demonstrated on a porous Fe2O3 coating, which is prepared via a facile spin-coating-assisted breath figure approach and a phase separation strategy. The prominent antiadhesive characteristic of these porous surfaces lies in their high-surface-energy hierarchical micro/nanoscale structure, which easily entraps one medium (oil or water) in the pore and repels other unmixable liquids and air bubbles. In addition, we successfully demonstrate an antifouling application of the coating, which shows excellent antiadhesive and super-antiwetting characteristics under multiple liquids. Our work extends relevant antiadhesion research from a single medium to multiple media and promises to broaden the applications of antiadhesive materials in sophisticated activities performed under complicated liquid environments, such as marine antifouling or pipeline transportation.

Robust Underwater Oil-Repellent Material Inspired by Columnar Nacre.

Inspired by natural columnar nacre, artificial montmorillonite/hydroxyethyl cellulose columnar nacre-like materials with a site-specific layered structure in the interior and a hierarchical columnar structure on the surface are prepared. The materials exhibit improved tensile strength, good chemical stability in seawater, superior resistance to sand-grain impingement, and robust underwater low-adhesive superoleophobicity.

Strengthening of polymer ordered porous materials based on a layered nanocomposite internal structure.

Ordered porous polymeric films attract more and more attention because they have many advantages and broad application prospects in many fields. But because of their large flexibility and poor mechanical properties, some of the scope for application is greatly limited. Inspired by the ordered pore structure of the honeycomb and the layered structure of natural nacre, we prepared an ordered porous polymer film with a layered structure in the pore wall by the solvent-evaporation-restriction assisted hard template method. Compared with other samples, this kind of film with the layered structure showed both excellent mechanical properties and good stability. This kind of film with high mechanical strength, is considered to have wide applications in the areas of separation, biomedicine, precision instruments, aerospace, environmental protection and so on.

Biomimetic heterogeneous multiple ion channels: a honeycomb structure composite film generated by breath figures.

We design a novel type of artificial multiple nanochannel system with remarkable ion rectification behavior via a facile breath figure (BF) method. Notably, even though the charge polarity in the channel wall reverses under different pH values, this nanofluidic device displays the same ionic rectification direction. Compared with traditional nanochannels, this composite multiple ion channel device can be more easily obtained and has directional ionic rectification advantages, which can be applied in many fields.

Anisotropic Slippery Surfaces: Electric-Driven Smart Control of a Drop's Slide.

Anisotropic slippery surfaces composed of directional, porous, conductive poly(3-hexylthiophene) (P3HT) fibers, and silicone oil exhibit excellent anisotropic sliding properties for several liquid droplets and the reversible control of conductive liquid droplets sliding on these surfaces under the application of voltage.

A visual and organic vapor sensitive photonic crystal sensor consisting of polymer-infiltrated SiO2 inverse opal.

A photonic crystal (PC) sensor that can selectively detect organic vapors through visual color changes has been proposed. The sensor was fabricated by infiltrating a tetraphenylethene polymer (TPEP) into the voids of SiO2 inverse opal photonic crystal. When the sensor was exposed to tetrahydrofuran or acetone vapor, a red shift of the stopband of more than 50 nm could be clearly observed; meanwhile, the film's color changed from violet to cyan. Subsequently, when exposed to air, the stopband underwent a blue shift and the color returned to violet. The reason for the observed change is that a reversible adsorption-desorption process occurs on alternate exposure of the sensor to organic vapor and air, due to the high specific surface area of the inverse opal macroporous structure and the high affinity of TPEP to tetrahydrofuran and acetone. The adsorption of vapor analyte can increase the PC's effective refractive index, which will induce the stopband red shift and the resulting color change according to Bragg's Law. The reversible adsorption-desorption of organic vapors varied the effective refractive index of the sensor repeatedly, causing the reversible stopband shift and color change, and providing a general method for the design of visual vapor sensors.

Special adhesion of natural honeycomb walls and their application.

In this paper, we investigated the wettability and adhesive behavior of the natural honeycomb wall for water and honey droplets. The cell walls have hydrophobic and highly adhesive properties for both water and honey in air. This highly adhesive cell wall was used as a "mechanical hand" to transfer micro-droplets. These findings will help us to comprehensively understand the surface properties of honeycomb walls, and will provide a novel strategy for achieving functional biomimetics based on honeycombs.