ABSTRACT
This study explores the bioactive secondary metabolite profiles of the peels of three major cultivars of bananas (Musa acuminata and Musa balbisiana). These cultivars are primarily grown in Southeast Asia and are widely consumed due to their rich nutritional and fiber content. The research utilizes advanced analytical techniques, specifically HPLC-DAD-q-TOF-MS/MS, in conjunction with both univariate and multivariate statistical analyses, to analyze the ethanolic extracts of the banana peels. This study identifies phenolic acids, flavonoids, and proanthocyanidins as significant contributors to the differentiation of the cultivars. The secondary metabolites rutin, chlorogenic acid, and gentisic acid are pinpointed as the key discriminants. Moreover, the research demonstrates a synergistic contribution of certain phytochemicals to the antioxidant and antibacterial properties of the banana peel extracts. The fingerprint profiling tools introduced in this study offer a reliable method for identifying metabolite biomarkers for the discrimination of banana cultivars.
ABSTRACT
BACKGROUND: Myopericytoma is a benign tumor that typically occurs within subcutaneous tissue and most often involves the distal extremities, followed by the proximal extremities, neck, thoracic vertebrae and oral cavity. Complete resection is often curative. Malignant myopericytoma is extremely rare and has a poor prognosis. Here, we report for the first time a case of malignant myopericytoma originating from the colon. CASE SUMMARY: A 69-year-old male was admitted to our hospital with right upper quadrant pain for five days. Imaging suggested a liver mass with hemorrhage. A malignant hepatic tumor was the initial diagnosis. Surgical resection was performed after a complete preoperative work up. Initial postoperative pathology suggested that the mass was a malignant myoblastoma unrelated to the liver. Four months after the first surgery, an enhanced computed tomography (CT) scan revealed a recurrence of the tumor. The diagnosis of malignant myopericytoma derived from the colon was confirmed on histopathological examination of the specimen from the second surgery. The patient did not return to the hospital regularly for surveillance. The first postoperative abdominal CT examination six months after the second surgery demonstrated multiple liver metastases. Survival time between the diagnosis of the tumor to death was approximately one year. CONCLUSION: Malignant myopericytoma is a rare cancer. Preoperative diagnosis may be difficult. Due to a lack of treatment options, prognosis is poor.
ABSTRACT
Circadian homeostasis in mammals is a key intrinsic mechanism for responding to the external environment. However, the interplay between circadian rhythms and the tumor microenvironment (TME) and its influence on metastasis are still unclear. Here, in patients with colorectal cancer (CRC), disturbances of circadian rhythm and the accumulation of monocytes and granulocytes were closely related to metastasis. Moreover, dysregulation of circadian rhythm promoted lung metastasis of CRC by inducing the accumulation of myeloid-derived suppressor cells (MDSCs) and dysfunctional CD8+ T cells in the lungs of mice. Also, gut microbiota and its derived metabolite taurocholic acid (TCA) contributed to lung metastasis of CRC by triggering the accumulation of MDSCs in mice. Mechanistically, TCA promoted glycolysis of MDSCs epigenetically by enhancing mono-methylation of H3K4 of target genes and inhibited CHIP-mediated ubiquitination of PDL1. Our study links the biological clock with MDSCs in the TME through gut microbiota/metabolites in controlling the metastatic spread of CRC, uncovering a systemic mechanism for cancer metastasis.
Subject(s)
Circadian Clocks , Gastrointestinal Microbiome , Myeloid-Derived Suppressor Cells , Animals , Mice , Myeloid-Derived Suppressor Cells/metabolism , Humans , Neoplasm Metastasis , Colorectal Neoplasms/pathology , Colorectal Neoplasms/metabolism , Colorectal Neoplasms/microbiology , Mice, Inbred C57BL , Male , Tumor Microenvironment , Lung Neoplasms/pathology , Lung Neoplasms/secondary , Lung Neoplasms/metabolism , Female , Mice, Inbred BALB C , Cell Line, TumorABSTRACT
STATEMENT OF PROBLEM: Consideration of the thickness of alveolar bone on both the palatal and labial sides and the inclination angle of teeth is important for immediate implant placement in the maxillary anterior region. However, comprehensive research exploring how sex and age influence the thickness of bone and tooth angle in the maxillary anterior region is lacking. PURPOSE: The purpose of this clinical study was to investigate the effect of sex and age on the thickness of labial and palatal bone and on the tooth inclination angle of maxillary central and lateral incisors using cone beam computed tomography (CBCT) images in an Asian population. MATERIAL AND METHODS: The labial and palatal bone thickness and the inclination angle of maxillary central and lateral incisors were measured from the CBCT images of 149 participants aged between 20 and 65 years. The correlation between the angles of the maxillary central and lateral incisors and sex and age on the tooth angles and thicknesses of labial and palatal bone was determined statistically. RESULTS: A high correlation (R=0.73) was found between the angle of maxillary central and lateral incisors. Men had higher angles of the maxillary central and lateral incisors and thicker palatal bone at the middle and root of the teeth compared with women. In both sexes, the angle and palatal bone thickness of maxillary central incisors were significantly higher than those of maxillary lateral incisors. The angle of both maxillary central and lateral incisors decreased gradually with age, with a difference in angle of over 10 degrees. CONCLUSIONS: The study revealed that women exhibited relatively thinner palatal bone compared with men. Additionally, participants aged between 40 and 65 years exhibited significantly thicker palatal bone compared with younger age groups, potentially providing a larger site for implant placement. Furthermore, tooth angle gradually decreases with age in the maxillary anterior region.
ABSTRACT
BACKGROUND: Dental cone beam computed tomography (CBCT) is commonly used to evaluate cancellous bone density before dental implant surgery. However, to our knowledge, no measurement approach has been standardized yet. This study aimed to evaluate the relationship between three different regions of interest (ROI) methods on cancellous bone density at the dental implant site using dental CBCT images. METHODS: Patients' dental CBCT images (n = 300) obtained before dental implant surgery were processed using Mimics (Materialise, Leuven, Belgium). At the potential implant sites, the rectangle, cylinder, and surrounding cylinder ROI methods were used to measure bone density. Repeated measures one-way analysis of variance was performed to compare the three ROI methods in terms of measurement results. Pearson correlation analysis was performed to identify the likely pair-wise correlations between the three ROI methods. RESULTS: The density value obtained using the surrounding cylinder approach (grayscale value [GV],523.56 ± 228.03) was significantly higher than the values obtained using the rectangle (GV, 497.04 ± 236.69) and cylinder (GV,493 ± 231.19) ROI methods in terms of results. Furthermore, significant correlations were noted between the ROI methods (r > 0.965; p < 0.001). CONCLUSIONS: The density measured using the surrounding cylinder method was the highest. The choice of method may not influence the trends of measurement results. TRIAL REGISTRATION: This study was approved by the Institutional Review Board of China Medical University Hospital, No. CMUH111-REC3-205. Informed consent was waived by the Institutional Review Board of China Medical University Hospital, CMUH111-REC3-205, owing to the retrospective nature of the study.
Subject(s)
Bone Density , Cone-Beam Computed Tomography , Humans , Cone-Beam Computed Tomography/methods , Female , Male , Middle Aged , Adult , Aged , Retrospective Studies , Preoperative Care/methods , Dental Implantation/methods , Young Adult , Dental Implants , Dental Implantation, Endosseous/methodsABSTRACT
Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.
ABSTRACT
PURPOSE: Finite element analysis and an in vitro experiment were employed to investigate the loading effects of angled abutments, comparing various customized angled abutments derived from the average angle of incisors in patients with a commercial 15°∆ angled abutment, on both the implant and surrounding bone. METHODS: Four customized angled abutment models (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) were developed using cone-beam computed tomography (CBCT) images of incisor inclination from various age groups of patients. 3D maxillary bone models were created from CBCT images of four individual patients. Finite element analysis and in-vitro strain gauge experiments were conducted, applying 100N or 50N of axial or oblique force, to assess the differences in stress/strain between the customized and the commercial 15°∆ angled abutments in both the implants and surrounding bone. RESULTS: Under axial loading, the stress values in the dental implant and surrounding bone were elevated due to the relatively higher angles of the customized angled abutments (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) when compared to the commercial 15°∆ angled abutment; however, under oblique loading the commercial 15°∆angled abutment exhibited higher stress values in both the implant and surrounding bone. For in vitro experiment, there is no statically difference in bone strain between the customized (21.9°∆) and the commercial 15°∆ angled abutments in axial loading. Nevertheless, in oblique loading using a commercial 15°∆ angled abutment induced the higher bone strains. CONCLUSION: Customized angled abutments offer lower stress/strain under oblique loads but higher stress/strain under axial loads compared to commercial ones. Therefore, in the design and application of angled abutments, careful consideration of the occlusal load direction is paramount for achieving biomechanical success of dental implant.
ABSTRACT
Total bacterial count in food is one of important food safety criteria. The current plate count method (Heterotrophic Plate Count) for food analysis requires microbiology lab facilities and at least 2â days turnover time. We developed a rapid fluorescence-based total bacterial count method that utilises semiconductor nanorods (SNRs) conjugated with a lectin Griffonia simplicifolia II (GSII-SNRs) to stain bacterial cells captured on syringe filters, via the common N-acetylglucosamine molecules on bacterial cell wall. This "Filter-and-Stain" detection method has a rapid turnover time of 20â min. The fluorescence emission can be seen under UV light with minimum interference from food sample background. The fluorescence intensity quantified through image analysis is proportional to the bacterial concentration with a limit of detection of 1000â CFU/mL, for total bacterial count assessment in food safety. Moreover, the GSII-SNRs do not bind to heat inactivated bacterial cells, and thus can differentiate live and dead bacteria. Our method has been validated with representative food (coffee powder, raw spinach leaves, and ready-to-eat tomato salsa) to demonstrate its high potential for on-site food safety assessment, especially in places with no immediate access to microbiology labs.
Subject(s)
Nanotubes , Semiconductors , Nanotubes/chemistry , Food Microbiology , Bacterial Load , Lectins/chemistry , Food Analysis , Spinacia oleracea/chemistry , Spinacia oleracea/microbiology , Solanum lycopersicum/chemistry , Solanum lycopersicum/microbiologyABSTRACT
Traumatic brain injury (TBI) is a global public-health problem. Astrocytes, and their mitochondria, are important factors in the pathogenesis of TBI-induced secondary injury. Mitochondria extracted from healthy tissues and then transplanted have shown promise in models of a variety of diseases. However, the effect on recipient astrocytes is unclear. Here, we isolated primary astrocytes from newborn C57BL/6 mice, one portion of which was used to isolate mitochondria, and another was subjected to stretch injury (SI) followed by transplantation of the isolated mitochondria. After incubation for 12 h, cell viability, mitochondrial dysfunction, calcium overload, redox stress, inflammatory response, and apoptosis were improved. Live-cell imaging showed that the transplanted mitochondria were incorporated into injured astrocytes and fused with their mitochondrial networks, which was in accordance with the changes in the expression levels of markers of mitochondrial dynamics. The astrocytic IKK/NF-κB pathway was decelerated whereas the AMPK/PGC-1α pathway was accelerated by transplantation. Together, these results indicate that exogenous mitochondria from untreated astrocytes can be incorporated into injured astrocytes and fuse with their mitochondrial networks, improving cell viability by ameliorating mitochondrial dysfunction, redox stress, calcium overload, and inflammation.
ABSTRACT
Background/purpose: Few studies have investigated the effects of abutment screw diameter in the stress of dental implants and alveolar bones under occlusal forces. In this study, we investigated how variations in implant diameter, abutment screw diameter, and bone condition affect stresses in the abutment screw, implant, and surrounding bone. Materials and methods: Three-dimensional finite element (FE) models were fabricated for dental implants with external hex-type abutments measuring 4 and 5 mm in diameter. The models also included abutment screws measuring 2.0 and 2.5 mm in diameter. Each implant model was integrated with the mandibular bone comprising the cortical bone and four types of cancellous bone. In total, 12 finite element models were generated, subjected to three different occlusal forces, and analyzed using FE software to investigate the stress distribution of dental implant and alveolar bone. Results: Wider implants demonstrated lower stresses in implant and bone compared with standard-diameter implants. The quality of cancellous bone has a minimal impact on the stress values of the implant, abutment screw, and cortical bone. Regardless of occlusal arrangement or quality of cancellous bone, a consistent pattern emerged: larger abutment screw diameters led to increased stress levels on the screws, while the stress levels in both cortical and cancellous bone showed comparatively minor fluctuations. Conclusion: Wider implants tend to have better stress distribution than standard-diameter implants. The potential advantage of augmenting the abutment screw diameter is unfavorable. It may result in elevated stresses in the implant system.
ABSTRACT
AIMS: A few studies have reported the effect and safety of pulsed field ablation (PFA) catheters for ablating atrial fibrillation (AF), which were mainly based on basket-shaped or flower-shaped designs. However, the clinical application of a circular-shaped multi-electrode catheter with magnetic sensors is very limited. To study the efficacy and safety of a PFA system in patients with paroxysmal AF using a circular-shaped multi-electrode catheter equipped with magnetic sensors for pulmonary vein isolation (PVI). METHODS AND RESULTS: A novel proprietary bipolar PFA system was used for PVI, which utilized a circular-shaped multi-electrode catheter with magnetic sensors and allowed for three-dimensional model reconstruction, mapping, and ablation in one map. To evaluate the efficacy, efficiency, and safety of this PFA system, a prospective, multi-centre, single-armed, pre-market clinical study was performed. From July 2021 to December 2022, 151 patients with paroxysmal AF were included and underwent PVI. The study examined procedure time, immediate success rate, procedural success rate at 12 months, and relevant complications. In all 151 patients, all the pulmonary veins were acutely isolated using the studied system. Pulsed field ablation delivery was 78.4 ± 41.8 times and 31.3 ± 16.7â ms per patient. Skin-to-skin procedure time was 74.2 ± 29.8â min, and fluoroscopy time was 13.1 ± 7.6â min. The initial 11 (7.2%) cases underwent procedures with deep sedation anaesthesia, and the following cases underwent local anaesthesia. In the initial 11 cases, 4 cases (36.4%) presented transient vagal responses, and the rest were all successfully preventatively treated with atropine injection and rapid fluid infusion. No severe complications were found during or after the procedure. During follow-up, 3 cases experienced atrial flutter, and 11 cases had AF recurrence. The estimated 12-month Kaplan-Meier of freedom from arrhythmia was 88.4%. CONCLUSION: The PFA system, comprised of a circular PFA catheter with magnetic sensors, could rapidly achieve PVI under three-dimensional guidance and demonstrated excellent safety with comparable effects.
Subject(s)
Atrial Fibrillation , Catheter Ablation , Pulmonary Veins , Humans , Pulmonary Veins/surgery , Treatment Outcome , Prospective Studies , Atrial Fibrillation/diagnosis , Atrial Fibrillation/surgery , Catheters , Catheter Ablation/adverse effects , Catheter Ablation/methods , Magnetic Phenomena , RecurrenceABSTRACT
BACKGROUND: Diabetic cardiomyopathy (DCM), which is a complication of diabetes, poses a great threat to public health. Recent studies have confirmed the role of NLRP3 (NOD-like receptor protein 3) activation in DCM development through the inflammatory response. Teneligliptin is an oral hypoglycemic dipeptidyl peptidase-IV inhibitor used to treat diabetes. Teneligliptin has recently been reported to have anti-inflammatory and protective effects on myocardial cells. AIM: To examine the therapeutic effects of teneligliptin on DCM in diabetic mice. METHODS: Streptozotocin was administered to induce diabetes in mice, followed by treatment with 30 mg/kg teneligliptin. RESULTS: Marked increases in cardiomyocyte area and cardiac hypertrophy indicator heart weight/tibia length reductions in fractional shortening, ejection fraction, and heart rate; increases in creatine kinase-MB (CK-MB), aspartate transaminase (AST), and lactate dehydrogenase (LDH) levels; and upregulated NADPH oxidase 4 were observed in diabetic mice, all of which were significantly reversed by teneligliptin. Moreover, NLRP3 inflammasome activation and increased release of interleukin-1ß in diabetic mice were inhibited by teneligliptin. Primary mouse cardiomyocytes were treated with high glucose (30 mmol/L) with or without teneligliptin (2.5 or 5 µM) for 24 h. NLRP3 inflammasome activation. Increases in CK-MB, AST, and LDH levels in glucose-stimulated cardiomyocytes were markedly inhibited by teneligliptin, and AMP (p-adenosine 5'-monophosphate)-p-AMPK (activated protein kinase) levels were increased. Furthermore, the beneficial effects of teneligliptin on hyperglycaemia-induced cardiomyocytes were abolished by the AMPK signaling inhibitor compound C. CONCLUSION: Overall, teneligliptin mitigated DCM by mitigating activation of the NLRP3 inflammasome.
ABSTRACT
Intestinal macrophages play crucial roles in both intestinal inflammation and immune homeostasis. They can adopt two distinct phenotypes, primarily determined by environmental cues. These phenotypes encompass the classically activated pro-inflammatory M1 phenotype, as well as the alternatively activated anti-inflammatory M2 phenotype. In regular conditions, intestinal macrophages serve to shield the gut from inflammatory harm. However, when a combination of genetic and environmental elements influences the polarization of these macrophages, it can result in an M1/M2 macrophage activation imbalance, subsequently leading to a loss of control over intestinal inflammation. This shift transforms normal inflammatory responses into pathological damage within the intestines. In patients with ulcerative colitis-associated colorectal cancer (UC-CRC), disorders related to intestinal inflammation are closely correlated with an imbalance in the polarization of intestinal M1/M2 macrophages. Therefore, reinstating the equilibrium in M1/M2 macrophage polarization could potentially serve as an effective approach to the prevention and treatment of UC-CRC. This paper aims to scrutinize the clinical evidence regarding Chinese medicine (CM) in the treatment of UC-CRC, the pivotal role of macrophage polarization in UC-CRC pathogenesis, and the potential mechanisms through which CM regulates macrophage polarization to address UC-CRC. Our objective is to offer fresh perspectives for clinical application, fundamental research, and pharmaceutical advancement in UC-CRC.
Subject(s)
Colitis-Associated Neoplasms , Disease Progression , Macrophages , Humans , Macrophages/pathology , Colitis-Associated Neoplasms/pathology , Colitis-Associated Neoplasms/drug therapy , Colorectal Neoplasms/pathology , Animals , Colitis, Ulcerative/pathology , Colitis, Ulcerative/drug therapy , Colitis, Ulcerative/complicationsABSTRACT
Background/purpose: Augmented reality (AR) is gaining popularity in medical applications, which may aid clinicians in achieving improved clinical outcomes. The purpose of this study was to determine the positional and angle errors of orthodontic miniscrew placement by using a self-developed AR aided system. Materials and methods: Cone beam computed tomography (CBCT) and patient printed models were used in in vitro experiments. The participants were divided into a control group and an AR group, in which traditional orthodontic methods and the AR-aided system were used respectively. After the information obtained from the CBCT images and navigation system was combined on the display device, the AR-aided system indicated the planned miniscrew position to guide the clinicians during the placement of miniscrews. Both methods were compared by a senior and a junior dentist, and the position and angle of miniscrew placement were statistically analyzed using Wilcoxon's signed-rank and Mann-Whitney U tests. Results: When the AR-aided system was used, the accuracy of miniscrew placement in the mesiodistal position considerably increased (83%) when the procedure was performed by a senior clinician. In addition, the accuracy of miniscrew placement in the mesiodistal position and the angle of miniscrew placement considerably increased by approximately 67% and 72%, respectively, when the procedure was performed by a junior clinician. The position error of miniscrew placement was smaller for the junior clinician when the AR-aided system was used than for the senior clinician. Conclusion: The AR-aided system improved the accuracy of miniscrew placement regardless of the clinician's level of experience.
ABSTRACT
Background/purpose: Before periapical surgery in the mandibular posterior teeth is performed, the thicknesses of the buccal alveolar bone wall and buccolingual root might be a critical issue. This study aimed to assess the anatomical structure of the posterior region of the mandible in Taiwanese individuals using cone-beam computed tomography (CBCT). Materials and methods: The CBCT images of 96 Taiwanese individuals (51 male and 45 female), which included 192 mandibular first molars and 192 mandibular second molars, were imported into medical imaging software to measure the buccal alveolar bone thickness and buccolingual root thickness at 3 mm above the root apex. Statistical analysis was conducted to examine the impact of tooth position, gender, and age on the anatomical position of mandibular molars. Results: The buccal alveolar bone thickness at 3 mm above the root apex of the mandibular second molar demonstrates a significantly higher value when compared to that of the first molar. Nonetheless, concerning the buccolingual root thickness, no significant differences were observed between these two teeth. In addition, the buccal alveolar bone thickness and buccolingual root thickness at 3 mm above the root apex may not be influenced by gender and age. Conclusion: The anatomical structures of the posterior region of the mandible in Taiwanese individuals exhibited variations between the mandibular first and second molars. However, these differences were not influenced by gender or age.
ABSTRACT
Background/purpose: Dental implants are a mainstream solution for missing teeth. For the improvement of dental implant surface treatment and design, short dental implants have become an alternative to various complex bone augmentation procedures, especially those performed at the posterior region of both the maxilla and mandible. The objective of this study was to evaluate the effect of various insertion methods on the primary stability of short dental implants. Materials and methods: Commercial dental implants were inserted into artificial mandibular bone specimens using various insertion methods (equicrestal position, subcrestal position 1.5 mm, and lateral cortical anchorage) in accordance with an implant surgical guide. Insertion torque value (ITV) curves were recorded while implant procedures were performed. Both maximum ITVs (MITVs) and final ITVs (FITVs) were evaluated. Subsequently, Periotest values (PTVs) and implant stability quotients (ISQs) were measured for all specimens. A Kruskal-Wallis test was conducted to analyze the results for four primary stability parameters, and the Dunn test was used for a post hoc pairwise comparison when a difference was identified. Results: For all groups, their mean MITVs ranged from 33.6 to 59.4 N cm, whereas their mean FITVs ranged from 17.5 to 43.5 N cm. Insertion torque value, ISQ, and PTV decreased significantly when implants were inserted into subcrestal positions. When implants were inserted in the lateral bicortical position, the four aforementioned parameters yielded greater values. Conclusion: When 6-mm short implants were inserted in a lateral cortical anchorage position, high primary stability was yielded.
ABSTRACT
This study aims to analyze the RNA expression and alternative polyadenylation (APA) events and identify APA tuned genes with prognostic significance in lung adenocarcinoma (LUAD). Genome-wide RNA expression profile and APA events were acquired in LUAD cancer and normal samples in GSE197346. Comparative analysis screened common deregulated genes and transcripts. All 11 and 19 transcripts were up and down expressed and polyadenylated in cancer samples, respectively. Clinical analysis found eight genes with prognostic significance, such as coiled-coil domain containing 137 (CCDC137). Role of CCDC137 in LUAD was first reported in this study. The cellular and animal experiments indicated that downregulated CCDC137 suppressed the malignant tumor phenotype and tumor growth in LUAD. Then, to identify APA regulators for elevated CCDC137, we analyzed the expression of 26 APA regulators in GSE197346 and The Cancer Genome Atlas (TCGA), and found 4 differential regulators: CPSF1, CELF2, NUDT21, and ELAVL1. At last, the correlation of eight genes with four differential APA regulators was analyzed, and CPSF1 showed a strong positive correlation with CCDC137. Based on the above results, we propose an oncogenic axis of CPSF1-CCDC137 in LUAD. This study first constructed a polyadenylation tuned RNA expression map in LUAD, and the proposed oncogenic axis of CPSF1-CCDC137 would shed light on the pathogenesis of LUAD.
Subject(s)
Adenocarcinoma of Lung , Adenocarcinoma , Lung Neoplasms , Animals , Polyadenylation/genetics , Adenocarcinoma of Lung/genetics , Lung Neoplasms/genetics , Lung Neoplasms/pathology , Adenocarcinoma/genetics , Adenocarcinoma/pathology , RNAABSTRACT
Objective To provide reference for the optimization and improvement of interoperability between the standard system of the Chinese Pharmacopoeia and other standards.Methods The interoperability of various pharmacopoeia standard systems was compared by searching for citations from the Chinese Pharmacopoeia,the United States Pharmacopoeia-National Formulary,the European Pharmacopoeia,the Japanese Pharmacopoeia,and other standards,including references to domestic regulations and guidelines,standards of the International Organization for Standardization,guidelines from the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use,documents of the World Health Organization,and standards from other countries and international organizations.Results In recent years,pharmacopoeias in the world had continuously increased the citation of non pharmacopoeial standards.The types,quantities,and fields of the United States Pharmacopoeia-National Formulary referencing other standards far exceed those of other pharmacopoeias.The Chinese Pharmacopoeia cites the least number of other standards.Conclusion It is suggested that the Chinese Pharmacopoeia should enhance the interoperability with other standard systems in the standards of various professional fields,enhance the openness,harmonization and advantages,and form a more complete standard system.
ABSTRACT
Rhino-orbito-cerebral mucormycosis (ROCM) is an acute, rapidly progressive, and lethal opportunistic fungal disease. Due to the atypical clinical manifestations, the disease is easily misdiagnosed in the early stage. The patients with ROCM associated cerebrovascular complications generally have a high mortality rate. This article reports a 47-year-old female patient with diabetic ketoacidosis and COVID-19 admitted to Central Hospital Affiliated to Shandong First Medical University. The results of radiological examinations and cerebrospinal fluid metagenomic next-generation sequencing confirmed as Rhizopus oryzae associated ROCM. In spite of receiving amphotericin B colloidal dispersion and isavuconazole treatments, the patient died of ROCM complicated with severe cerebral infarctions and pulmonary infection. The purpose of this case report is to summarize the clinical characteristics of ROCM with cerebrovascular ischemic events and the rare condition of bilateral anterior circulation involvements, and introduce recent diagnostic and therapeutic approaches for this disease.