ABSTRACT
BACKGROUND: Intensity-modulated radiation therapy (IMRT) is considered standard of care for head and neck squamous cell carcinoma (HNSCC). Improved conformity of IMRT and smaller margins, however, have led to concerns of increased rates of marginal failures. We hypothesize that while patterns of failure (PoF) after IMRT for HNSCC have been published before, the quality of patient positioning and image guided radiotherapy (IGRT) have rarely been taken into account, and their importance remains unclear. This work provides a systematic review of the consideration of IGRT in PoF studies after IMRT for HNSCC. MATERIALS AND METHODS: A systematic literature search according to PRISMA guidelines was performed on PubMed for HNSCC, IMRT and PoF terms and conference abstracts from ESTRO and ASTRO 2020 and 2021 were screened. Studies were included if they related PoF of HNSCC after IMRT to the treated volumes. Data on patient and treatment characteristics, IGRT, treatment adaptation, PoF and correlation of PoF to IGRT was extracted, categorized and analyzed. RESULTS: One-hundred ten studies were included. The majority (70) did not report any information on IGRT. The remainder reported daily IGRT (18), daily on day 1-3 or 1-5, then weekly (7), at least weekly (12), or other schemes (3). Immobilization was performed with masks (78), non-invasive frames (4), or not reported (28). The most common PoF classification was "in-field/marginal/out-of-field", reported by 76 studies. Only one study correlated PoF in nasopharyngeal cancer patients to IGRT. CONCLUSION: The impact of IGRT on PoF in HNSCC is severely underreported in existing literature. Only one study correlated PoF to IGRT measures and setup uncertainty. Further, most PoF studies relied on outdated terminology ("in/out-of-field"). A clearly defined and up-to-date PoF terminology is necessary to evaluate PoFs properly, as is systematic and preferably prospective data generation. PoF studies should consistently and comprehensively consider and report on IGRT.
Subject(s)
Head and Neck Neoplasms , Nasopharyngeal Neoplasms , Radiotherapy, Intensity-Modulated , Humans , Squamous Cell Carcinoma of Head and Neck , Prospective Studies , Head and Neck Neoplasms/radiotherapyABSTRACT
BACKGROUND AND PURPOSE: To assess the feasibility of postoperative stereotactic body radiation therapy (SBRT) for patients with hybrid implants consisting of carbon fiber reinforced polyetheretherketone and titanium (CFP-T) using CyberKnife. MATERIALS AND METHODS: All essential steps within a radiation therapy (RT) workflow were evaluated. First, the contouring process of target volumes and organs at risk (OAR) was done for patients with CFP-T implants. Second, after RT-planning, the accuracy of the calculated dose distributions was tested in a slab phantom and an anthropomorphic phantom using film dosimetry. As a third step, the accuracy of the mandatory image guided radiation therapy (IGRT) including automatic matching was assessed using the anthropomorphic phantom. For this goal, a standard quality assurance (QA) test was modified to carry out its IGRT part in presence of CFP-T implants. RESULTS: Using CFP-T implants, target volumes could precisely delineated. There was no need for compromising the contours to overcome artifact obstacles. Differences between measured and calculated dose values were below 11% for the slab phantom, and at least 95% of the voxels were within 5% dose difference. The comparisons for the anthropomorphic phantom showed a gamma-passing rate (5%, 1 mm) of at least 97%. Additionally the test results with and without CFP-T implants were comparable. No issues concerning the IGRT were detected. The modified machine QA test resulted in a targeting error of 0.71 mm, which corresponds to the results of the unmodified standard tests. CONCLUSION: Dose calculation and delivery of postoperative spine SBRT is feasible in proximity of CFP-T implants using a CyberKnife system.
Subject(s)
Radiosurgery , Radiotherapy, Intensity-Modulated , Robotic Surgical Procedures , Carbon , Feasibility Studies , Humans , Phantoms, Imaging , Radiosurgery/methods , Radiotherapy Dosage , Radiotherapy Planning, Computer-Assisted/methods , Radiotherapy, Intensity-Modulated/methods , TitaniumABSTRACT
An increasing number of mechanical assist devices, especially left ventricular assist devices (VADs), are being implanted for prolonged periods and as destination therapy. Some VAD patients require radiotherapy due to concomitant oncologic morbidities, including thoracic malignancies. This raises the potential of VAD malfunction via radiation-induced damage. So far, only case reports and small case series on radiotherapy have been published, most of them on HeartMate II (HMII, Abbott, North Chicago, IL, USA). Significantly, the effects of irradiation on the HeartMate 3 (HM3, Abbott) remain undefined, despite the presence of controller components engineered within the pump itself. We report the first case of a patient with a HM3 who successfully underwent stereotactic hypofractionated radiotherapy due to an early-stage non-small-cell lung cancer. The patient did not suffer from any complications, including toxicity or VAD malfunction. Based on this case report and on published literature, we think that performing radiotherapy after VAD implantation with the aid of a multidisciplinary team could be performed, but more in vitro studies and cases series are needed to reinforce this statement.
Subject(s)
Adenocarcinoma/radiotherapy , Cardiomyopathies/therapy , Heart-Assist Devices , Lung Neoplasms/radiotherapy , Radiotherapy, Intensity-Modulated , Antibiotics, Antineoplastic/adverse effects , Breast Neoplasms/drug therapy , Carcinoma, Ductal, Breast/drug therapy , Cardiomyopathies/chemically induced , Doxorubicin/adverse effects , Female , Humans , Middle Aged , Radiation Dose HypofractionationABSTRACT
BACKGROUND: In order to locate an arteriovenous malformation, typically, a digital subtraction angiography (DSA) is carried out. To use the DSA for target definition an accurate image registration between CT and DSA is required. Carrying out a non-invasive, frameless procedure, registration of the 2D-DSA images with the CT is critical. A new software prototype is enabling this frameless procedure. The aim of this work was to evaluate the prototype in terms of targeting accuracy and reliability based on phantom measurements as well as with the aid of patient data. In addition, the user's ability to recognize registration mismatches and quality was assessed. METHODS: Targeting accuracy was measured with a simple cubic, as well as with an anthropomorphic head phantom. Clearly defined academic targets within the phantoms were contoured on the CT. These reference structures were compared with the structures generated within the prototype. A similar approach was used with patient data, where the clinically contoured target served as the reference structure. An important error source decreasing the target accuracy comes from registration errors between CT and 2D-DSA. For that reason, the tools in BC provided to the user to check these registrations are very important. In order to check if the user is able to recognize registration errors, a set of different registration errors was introduced to the correctly registered CT and 2D-DSA image data sets of three different patients. Each of six different users rated the whole set of registrations within the prototype. RESULTS: The target accuracy of the prototype was found to be below 0.04 cm for the cubic phantom and below 0.05 cm for the anthropomorphic head phantom. The mean target accuracy for the 15 patient cases was found to be below 0.3 cm. In the registration verification part, almost all introduced registration errors above 1° or 0.1 cm were detected by the six users. Nevertheless, in order to quantify and categorize the possibility to detect mismatches in the registration process more data needs to be evaluated. CONCLUSION: Our study shows, that the prototype is a useful tool that has the potential to fill the gap towards a frameless procedure when treating AVMs with the aid of 2D-DSA images in radiosurgery. The target accuracy of the prototype is similar to other systems already established in clinical routine.
Subject(s)
Angiography, Digital Subtraction/methods , Arteriovenous Malformations/surgery , Image Processing, Computer-Assisted/methods , Imaging, Three-Dimensional/methods , Phantoms, Imaging , Radiosurgery/methods , Software , Arteriovenous Malformations/diagnostic imaging , Arteriovenous Malformations/pathology , Head/diagnostic imaging , HumansABSTRACT
Compared to a conventional linear accelerator, the Cyberknife (CK) is a unique system with respect to radiation protection shielding and the variety and number of non-coplanar beams are two key components regarding this aspect. In this work, a framework to assess the direction distribution and modulation factor (MF) of clinically applied treatment beams of a CyberKnife M6 is developed. Database filtering options allow studying the influence of different parameters such as collimator types, treatment sites or different bunker sizes. A distribution of monitor units (MU) is generated by projecting treatment beams onto the walls, floor and ceiling of the CyberKnife bunker. This distribution is found to be highly heterogeneous and depending, among other parameters, on the bunker size. For our bunker design, 10%-13% of the MUs are delivered to the right and left wall, each. The floor receives more than 64% of the applied MUs, while the wall behind the patient's head is not hit by primary treatment beams. Between 0% and 5% of the total MUs are delivered to the wall at the patient's feet. This number highly depends on the treatment site, e.g., for extracranial patients no beams hit that wall. Collimator choice was found to have minor influence on the distribution of MUs. On the other hand, the MF depends on the collimator type as well as on the treatment site. The MFs (delivered MU/prescribed dose) for all treatments, all MLC treatments, cranial and extracranial treatments are 8.3, 6.4, 7.7, and 9.9 MU/cGy, respectively. The developed framework allows assessing and monitoring important parameters regarding radiation protection of a CK-M6 using the actually applied treatment beams. Furthermore, it enables evaluating different clinical and constructional situations using the filtering options.
Subject(s)
Neoplasms/radiotherapy , Particle Accelerators/instrumentation , Radiation Protection/methods , Radiation Protection/standards , Radiosurgery/methods , Radiotherapy Planning, Computer-Assisted/methods , Radiotherapy, Conformal/methods , Humans , Radiotherapy Dosage , Retrospective Studies , Time FactorsABSTRACT
PURPOSE: To investigate the dosimetric properties of an electronic portal imaging device (EPID) for electron beam detection and to evaluate its potential for quality assurance (QA) of modulated electron radiotherapy (MERT). METHODS: A commercially available EPID was used to detect electron beams shaped by a photon multileaf collimator (MLC) at a source-surface distance of 70 cm. The fundamental dosimetric properties such as reproducibility, dose linearity, field size response, energy response, and saturation were investigated for electron beams. A new method to acquire the flood-field for the EPID calibration was tested. For validation purpose, profiles of open fields and various MLC fields (square and irregular) were measured with a diode in water and compared to the EPID measurements. Finally, in order to use the EPID for QA of MERT delivery, a method was developed to reconstruct EPID two-dimensional (2D) dose distributions in a water-equivalent depth of 1.5 cm. Comparisons were performed with film measurement for static and dynamic monoenergy fields as well as for multienergy fields composed by several segments of different electron energies. RESULTS: The advantageous EPID dosimetric properties already known for photons as reproducibility, linearity with dose, and dose rate were found to be identical for electron detection. The flood-field calibration method was proven to be effective and the EPID was capable to accurately reproduce the dose measured in water at 1.0 cm depth for 6 MeV, 1.3 cm for 9 MeV, and 1.5 cm for 12, 15, and 18 MeV. The deviations between the output factors measured with EPID and in water at these depths were within ±1.2% for all the energies with a mean deviation of 0.1%. The average gamma pass rate (criteria: 1.5%, 1.5 mm) for profile comparison between EPID and measurements in water was better than 99% for all the energies considered in this study. When comparing the reconstructed EPID 2D dose distributions at 1.5 cm depth to film measurements, the gamma pass rate (criteria: 2%, 2 mm) was better than 97% for all the tested cases. CONCLUSIONS: This study demonstrates the high potential of the EPID for electron dosimetry, and in particular, confirms the possibility to use it as an efficient verification tool for MERT delivery.