High Detectivity Near Infrared Organic Photodetectors Using an Asymmetric Non-Fullerene Acceptor for Optimal Nanomorphology and Suppressed Dark Current.

Recently, the development of non-fullerene acceptors (NFAs) for near-infrared (NIR) organic photodetectors (OPDs) has attracted great interest due to their excellent NIR light absorption properties. Herein, we developed NFAs by substituting an electron-donating moiety (branched alkoxy thiophene (BAT)) asymmetrically (YOR1) and symmetrically (YOR2) for the Y6 framework. YOR1 exhibited nanoscale phase separation in a film blended with PTB7-Th. Moreover, substituting the BAT unit effectively extended the absorption wavelengths of YOR1 over 1000 nm by efficient intramolecular charge transfer and extension of the conjugation length. Consequently, YOR1-OPD exhibited significantly reduced dark current and improved responsivity by simultaneously satisfying optimal nanomorphology and significant suppression of charge recombination, resulting in 1.98 × 1013 and 3.38 × 1012 Jones specific detectivity at 950 and 1000 nm, respectively. Moreover, we successfully demonstrated the application of YOR1-OPD in highly sensitive photoplethysmography sensors using NIR light. This study suggests a strategic approach for boosting the overall performance of NIR OPDs targeting a 1000 nm light signal using an all-in-one (optimal morphology, suppressed dark current, and extended NIR absorption wavelength) NFA.

In-sensor image memorization and encoding via optical neurons for bio-stimulus domain reduction toward visual cognitive processing.

As machine vision technology generates large amounts of data from sensors, it requires efficient computational systems for visual cognitive processing. Recently, in-sensor computing systems have emerged as a potential solution for reducing unnecessary data transfer and realizing fast and energy-efficient visual cognitive processing. However, they still lack the capability to process stored images directly within the sensor. Here, we demonstrate a heterogeneously integrated 1-photodiode and 1 memristor (1P-1R) crossbar for in-sensor visual cognitive processing, emulating a mammalian image encoding process to extract features from the input images. Unlike other neuromorphic vision processes, the trained weight values are applied as an input voltage to the image-saved crossbar array instead of storing the weight value in the memristors, realizing the in-sensor computing paradigm. We believe the heterogeneously integrated in-sensor computing platform provides an advanced architecture for real-time and data-intensive machine-vision applications via bio-stimulus domain reduction.

Strain-durable dark current in near-infrared organic photodetectors for skin-conformal photoplethysmographic sensors.

Sensitive detection of near-infrared (NIR) light is applicable to variety of optical, chemical, and biomedical sensors. Of these diverse applications, NIR photodetectors have been used as a key component for photoplethysmography (PPG) sensors. In particular, because NIR organic photodetectors (OPDs) enable fabrication of stretchable and skin-conformal PPG sensors, they are attaining tremendously increasing interest in both academia and industry. Herein, we report strain-durable and highly sensitive NIR OPDs using an organic bulk heterojunction (BHJ) layer. For effective suppression of dark current, we employed BHJ combination consisting of PTB7-Th:Y6 which forms high energy barrier against transport-injected holes. The optimized OPDs exhibited high specific detectivity up to 2.2 × 1012 Jones at 800 nm. By constructing the devices on the parylene substrates, we successfully demonstrated stretchable NIR OPDs and high-performance skin-conformal PPG sensors.

Origin of the anisotropic-strain-driven photoresponse enhancement in inorganic halide-based self-powered flexible photodetectors.

Strain engineering has been recognized as a critical strategy in modulating the optoelectronic properties of perovskite halide materials. Here, we demonstrate a self-powered, flexible photodetector based on CsPbBr3 thin films with controllable compressive or tensile strain of up to ±0.81%, which was produced in situ via a sequential two-step deposition on bent polymer substrates. The best photoresponsivity of ∼121.5 mA W-1 with a photocurrent of 5.15 µA was achieved at zero bias under a power intensity of 0.47 mW cm-2 for the maximum tensile strain of +0.81%, which corresponds to a ∼100.2% increase relative to that of the unstrained case. The in situ tensile strain adjusted the band alignments, making them favorable for enhanced charge transport and thus a higher photoresponse. The structural origin of this superlative balanced photodetection performance was systematically revealed to be associated with the distortion of coupled PbBr6 octahedra and the atomic displacement within the octahedron.

Mid-infrared photon sensing using InGaN/GaN nanodisks via intersubband absorption.

Intersubband (intraband) transitions allow absorption of photons in the infrared spectral regime, which is essential for IR-photodetector and optical communication applications. Among various technologies, nanodisks embedded in nanowires offer a unique opportunity to be utilized in intraband devices due to the ease of tuning the fundamental parameters such as strain distribution, band energy, and confinement of the active region. Here, we show the transverse electric polarized intraband absorption using InGaN/GaN nanodisks cladded by AlGaN. Fourier transform infrared reflection (FTIR) measurement confirms absorption of normal incident in-plane transverse electric polarized photons in the mid-IR regime (wavelength of ~ 15 µm) at room temperature. The momentum matrix of the nanodisk energy states indicates electron transition from the ground state s into the px or py orbital-like excited states. Furthermore, the absorption characteristics depending on the indium composition and nanowire diameter exhibits tunability of the intraband absorption spectra within the nanodisks. We believe nanodisks embedded nanowires is a promising technology for achieving tunable detection of photons in the IR spectrum.

Visible and infrared dual-band imaging via Ge/MoS2 van der Waals heterostructure.

Multispectral photodetectors are emerging devices capable of detecting photons in multiple wavelength ranges, such as visible (VIS), near infrared (NIR), etc. Image data acquired with these photodetectors can be used for effective object identification and navigations owing to additional information beyond human vision, including thermal image and night vision. However, these capabilities are hindered by the structural complexity arising from the integration of multiple heterojunctions and selective absorbers. In this paper, we demonstrate a Ge/MoS2 van der Waals heterojunction photodetector for VIS- and IR-selective detection capability under near-photovoltaic and photoconductive modes. The simplified single-polarity bias operation using single pixel could considerably reduce structural complexity and minimize peripheral circuitry for multispectral selective detection. The proposed multispectral photodetector provides a potential pathway for the integration of VIS/NIR vision for application in self-driving, surveillance, computer vision, and biomedical imaging.

Low Subthreshold Slope AlGaN/GaN MOS-HEMT with Spike-Annealed HfO2 Gate Dielectric.

AlGaN/GaN metal-oxide semiconductor high electron mobility transistors (MOS-HEMTs) with undoped ferroelectric HfO2 have been investigated. Annealing is often a critical step for improving the quality of as-deposited amorphous gate oxides. Thermal treatment of HfO2 gate dielectric, however, is known to degrade the oxide/nitride interface due to the formation of Ga-containing oxide. In this work, the undoped HfO2 gate dielectric was spike-annealed at 600 °C after the film was deposited by atomic layer deposition to improve the ferroelectricity without degrading the interface. As a result, the subthreshold slope of AlGaN/GaN MOS-HEMTs close to 60 mV/dec and on/off ratio>109 were achieved. These results suggest optimizing the HfO2/nitride interface can be a critical step towards a low-loss high-power switching device.

Interface Trap-Induced Temperature Dependent Hysteresis and Mobility in ß-Ga2O3 Field-Effect Transistors.

Interface traps between a gate insulator and beta-gallium oxide (ß-Ga2O3) channel are extensively studied because of the interface trap charge-induced instability and hysteresis. In this work, their effects on mobility degradation at low temperature and hysteresis at high temperature are investigated by characterizing electrical properties of the device in a temperature range of 20-300 K. As acceptor-like traps at the interface are frozen below 230 K, the hysteresis becomes negligible but simultaneously the channel mobility significantly degrades because the inactive neutral traps allow additional collisions of electrons at the interface. This is confirmed by the fact that a gate bias adversely affects the channel mobility. An activation energy of such traps is estimated as 170 meV. The activated trap charges' trapping and de-trapping processes in response to the gate pulse bias reveal that the time constants for the slow and fast processes decrease due to additionally activated traps as the temperature increases.

Effective Dark Current Suppression for High-Detectivity Organic Near-Infrared Photodetectors Using a Non-Fullerene Acceptor.

Near-infrared organic photodetectors (NIR OPDs) have attracted considerable attention because of their inherent advantages such as a tailorable light absorption property, low-cost fabrication, compatibility with flexible substrates, and room-temperature operation. In particular, the development of NIR detection between 900 and 950 nm is crucial for noise-free communication in ambient environments. In this work, we demonstrate high-detectivity NIR OPDs at 900-950 nm by employing a non-fullerene acceptor (ITIC) used with an NIR-absorbing conjugated polymer (PNIR) for bulk heterojunction (BHJ), which significantly suppressed dark current. Systemic characterizations including electrical, structural, and morphological analyses revealed that ITIC effectively reduces charge recombination during the operation of the OPDs under NIR illumination, resulting in a dark current reduction and high detectivity of over 3.2 × 1011 Jones at 900-950 nm. The results presented here demonstrate that utilizing a non-fullerene acceptor for BHJ-type NIR OPDs is evidently a strategic approach for the simultaneous achievement of the low dark current and high-detectivity of NIR OPDs.

Hetero-integration enables fast switching time-of-flight sensors for light detection and ranging.

The time-of-flight (ToF) principle is a method used to measure distance and construct three-dimensional (3D) images by detecting the time or the phase difference between emitted and back-reflected optical flux. The ToF principle has been employed for various applications including light ranging and detection (LiDAR), machine vision and biomedical engineering; however, bulky system size and slow switching speed have hindered the widespread application of ToF technology. To alleviate these issues, a demonstration of hetero-integration of GaN-based high electron mobility transistors (HEMTs) and GaAs-based vertical cavity surface emitting lasers (VCSELs) on a single platform via a cold-welding method was performed. The hetero-integrated ToF sensors show superior switching performance when compared to silicon-transistor-based systems, miniaturizing size and exhibiting stable ranging and high-resolution depth-imaging. This hetero-integrated system of dissimilar material-based high-performance devices suggests a new pathway towards enabling high-resolution 3D imaging and inspires broader range application of heterogeneously integrated electronics and optoelectronics.

Improved visible-blindness of AlGaN deep ultraviolet photodiode with monolithically integrated angle-insensitive Fabry-Perot filter.

Despite the rapidly increasing demand for accurate ultraviolet (UV) detection in various applications, conventional Si-based UV sensors are less accurate due to disruption by visible light. Recently, Ga(Al)N-based photodiodes have attracted great interest as viable platforms that can avoid such issues because their wide bandgap enables efficient detection of UV light and they are theoretically blind to visible and infrared light. However, the heteroepitaxy of a Ga(Al)N layer on sapphire substrates inevitably leads to defects, and the Ga(Al)N photodiode (PD) becomes not perfectly insensible to visible light. Employment of a dielectric stacked UV pass filter is possible to avoid unwanted absorption of visible light, but the angle-dependent pass band limits the detection angle. Here, we have demonstrated the Ag-Al2O3 Fabry-Perot UV pass filter-integrated AlGaN ultraviolet photodiode. The inherent optical extinction characteristics of Ag was utilized to design the fabrication-tolerant UV pass filter with a peak transmittance at ∼325 nm. As the angle of incidence increased, the peak transmission decreased from 45% to 10%, but the relative transmission spectrum remained almost unchanged. By integrating these filters, the visible light rejection ratio (responsivity for 315 nm light to responsivity for 405 nm light) was improved by a factor of 10, reaching a value of 106 at angles of up to 80 degrees.

CdSe/ZnS quantum dot encapsulated MoS2 phototransistor for enhanced radiation hardness.

Notable progress achieved in studying MoS2 based phototransistors reveals the great potential to be applicable in various field of photodetectors, and to further expand it, a durability study of MoS2 phototransistors in harsh environments is highly required. Here, we investigate effects of gamma rays on the characteristics of MoS2 phototransistors and improve its radiation hardness by incorporating CdSe/ZnS quantum dots as an encapsulation layer. A 73.83% decrease in the photoresponsivity was observed after gamma ray irradiation of 400 Gy, and using a CYTOP and CdSe/ZnS quantum dot layer, the photoresponsivity was successfully retained at 75.16% on average after the gamma ray irradiation. Our results indicate that the CdSe/ZnS quantum dots having a high atomic number can be an effective encapsulation method to improve radiation hardness and thus to maintain the performance of the MoS2 phototransistor.

Photoacoustic Energy Sensor for Nanosecond Optical Pulse Measurement.

We demonstrate a photoacoustic sensor capable of measuring high-energy nanosecond optical pulses in terms of temporal width and energy fluence per pulse. This was achieved by using a hybrid combination of a carbon nanotube-polydimethylsiloxane (CNT-PDMS)-based photoacoustic transmitter (i.e., light-to-sound converter) and a piezoelectric receiver (i.e., sound detector). In this photoacoustic energy sensor (PES), input pulsed optical energy is heavily absorbed by the CNT-PDMS composite film and then efficiently converted into an ultrasonic output. The output ultrasonic pulse is then measured and analyzed to retrieve the input optical characteristics. We quantitatively compared the PES performance with that of a commercial thermal energy meter. Due to the efficient energy transduction and sensing mechanism of the hybrid structure, the minimum-measurable pulsed optical energy was significantly lowered, ~157 nJ/cm², corresponding to 1/760 of the reference pyroelectric detector. Moreover, despite the limited acoustic frequency bandwidth of the piezoelectric receiver, laser pulse widths over a range of 6⁻130 ns could be measured with a linear relationship to the ultrasound pulse width of 22⁻153 ns. As CNT has a wide electromagnetic absorption spectrum, the proposed pulsed sensor system can be extensively applied to high-energy pulse measurement over visible through terahertz spectral ranges.

Bias-dependent photoresponsivity of multi-layer MoS2 phototransistors.

We studied the variation of photoresponsivity in multi-layer MoS2 phototransistors as the applied bias changes. The photoresponse gain is attained when the photogenerated holes trapped in the MoS2 attract electrons from the source. Thus, the photoresponsivity can be controlled by the gate or drain bias. When the gate bias is below the threshold voltage, a small amount of electrons are diffused into the channel, due to large barrier between MoS2 and source electrode. In this regime, as the gate or drain bias increases, the barrier between the MoS2 channel and the source becomes lower and the number of electrons injected into the channel exponentially increases, resulting in an exponential increase in photoresponsivity. On the other hand, if the gate bias is above the threshold voltage, the photoresponsivity is affected by the carrier velocity rather than the barrier height because the drain current is limited by the carrier drift velocity. Hence, with an increase in drain bias, the carrier velocity increases linearly and becomes saturated due to carrier velocity saturation, and therefore, the photoresponsivity also increases linearly and becomes saturated.

Distinct mechanisms for the upconversion of NaYF4:Yb3+,Er3+ nanoparticles revealed by stimulated emission depletion.

Upconversion nanoparticles (UCNPs) have attracted enormous interest over the past few years because of their unique optical properties and potential for use in various applications such as bioimaging probes, biosensors, and light-harvesting materials for photovoltaics. The improvement of imaging resolution is one of the most important goals for UCNPs used in biological applications. Super-resolution imaging techniques that overcome the fundamental diffraction limit of light rely on the photochemistry of organic dyes or fluorescent proteins. Here we report our progress toward super-resolution microscopy with UCNPs. We found that the red emission (655 nm) of core/shell UCNPs with the structure NaYF4:Yb3+,Er3+/NaYF4 could be modulated by emission depletion (ED) of the intermediate state that interacts resonantly with an infrared beam (1540 nm). In contrast, the green emission bands (525 and 545 nm) of the UCNPs were less affected by irradiation with the infrared beam. The origin of such distinct behaviors between the green and red emissions was attributed to their different photophysical pathways.

Flexible and Wavelength-Selective MoS2 Phototransistors with Monolithically Integrated Transmission Color Filters.

Color-selective or wavelength-tunable capability is a crucial feature for two-dimensional (2-D) semiconducting material-based image sensor applications. Here, we report on flexible and wavelength-selective molybdenum disulfide (MoS2) phototransistors using monolithically integrated transmission Fabry-Perot (F-P) cavity filters. The fabricated multilayer MoS2 phototransistors on a polyarylate substrate exhibit decent electrical characteristics (µFE > 64.4 cm2/Vs, on/off ratio > 106), and the integrated F-P filters, being able to cover whole visible spectrum, successfully modulate the spectral response characteristics of MoS2 phototransistors from ~495 nm (blue) to ~590 nm (amber). Furthermore, power dependence of both responsivity and specific detectivity shows similar trend with other reports, dominated by the photogating effect. When combined with large-area monolayer MoS2 for optical property enhancement and array processing, our results can be further developed into ultra-thin flexible photodetectors for wearables, conformable image sensor, and other optoelectronic applications.

Highly efficient single-junction GaAs thin-film solar cell on flexible substrate.

There has been much interest in developing a thin-film solar cell because it is lightweight and flexible. The GaAs thin-film solar cell is a top contender in the thin-film solar cell market in that it has a high power conversion efficiency (PCE) compared to that of other thin-film solar cells. There are two common structures for the GaAs solar cell: n (emitter)-on-p (base) and p-on-n. The former performs better due to its high collection efficiency because the electron diffusion length of the p-type base region is much longer than the hole diffusion length of the n-type base region. However, it has been limited to fabricate highly efficient n-on-p single-junction GaAs thin film solar cell on a flexible substrate due to technical obstacles. We investigated a simple and fast epitaxial lift-off (ELO) method that uses a stress originating from a Cr/Au bilayer on a 125-µm-thick flexible substrate. A metal combination of AuBe/Pt/Au is employed as a new p-type ohmic contact with which an n-on-p single-junction GaAs thin-film solar cell on flexible substrate was successfully fabricated. The PCE of the fabricated single-junction GaAs thin-film solar cells reached 22.08% under air mass 1.5 global illumination.

InGaN/GaN nanowires grown on SiO(2) and light emitting diodes with low turn on voltages.

GaN nanowires and InGaN disk heterostructures are grown on an amorphous SiO2 layer by a plasma-assisted molecular beam epitaxy. Structural studies using scanning electron microscopy and high-resolution transmission electron microscopy reveal that the nanowires grow vertically without any extended defect similarly to nanowires grown on Si. The as-grown nanowires have an intermediate region consisting of Ga, O, and Si rather than SiNx at the interface between the nanowires and SiO2. The measured photoluminescence shows a variation of peak wavelengths ranging from 580 nm to 635 nm because of non-uniform indium incorporation. The nanowires grown on SiO2 are successfully transferred to a flexible polyimide sheet by Au-welding and epitaxial lift-off processes. The light-emitting diodes fabricated with the transferred nanowires are characterized by a turn-on voltage of approximately 4 V. The smaller turn-on voltage in contrast to those of conventional nanowire light-emitting diodes is due to the absence of an intermediate layer, which is removed during an epitaxial lift-off process. The measured electroluminescence shows peak wavelengths of 610-616 nm with linewidths of 116-123 nm.

Angle- and position-insensitive electrically tunable absorption in graphene by epsilon-near-zero effect.

We propose an electrically tunable absorber based on epsilon-near-zero (ENZ) effect of graphene embedded in a nanocavity, which is composed of metal grating and substrate. Due to strong surface-normal electric field confined in ENZ graphene in the proposed structure, greatly enhanced light absorption (~80%) is achieved in an ultrathin graphene monolayer. By electrically controlling the Fermi-level of graphene, a sharp peak absorption wavelength is tuned over a wide range. The proposed device can work as an optical modulator or a tunable absorption filter, which has a unique feature of incident angle insensitiveness owing to the ENZ effect and magnetic dipole resonance. Moreover, existence of a significantly dominant electric field and its uniformity make the device performance independent of the position of the graphene layer in the nanocavity, which provides great fabrication tolerance.

Room-temperature polariton lasing from GaN nanowire array clad by dielectric microcavity.

Room-temperature polariton lasing from a GaN-dielectric microcavity is demonstrated with optical excitation. The device is fabricated with a GaN nanowire array clad by Si3N4/SiO2-distributed Bragg reflectors. The nanowire array is initially grown on silicon substrate by molecular beam epitaxy. A distinct nonlinearity in the lower polariton emission is observed at a threshold optical energy density of 625 nJ/cm(2), accompanied by significant line width narrowing to 5 meV and a small blue shift of ~1 meV. The measured polariton dispersion is characterized by a Rabi splitting of 40 meV and a cavity exciton detuning of -17 meV. The device described here is a demonstration of exciton-photon strong coupling phenomenon in an array of light emitters and paves the way for the realization of a room temperature electrically injected polariton laser.