ABSTRACT
Diafiltration (DF) is a separation method used to separate and concentrate macromolecules, such as polysaccharides and proteins. To obtain high-purity target molecules by DF, appropriate conditions should be used. In this study, a mathematical model was developed to suggest appropriate ultra-filtration (UF) membrane modules for the separation of phycocyanin (PC) by multistep DF. PC is a protein produced by microalgae. The contribution of each UF membrane module to PC productivity and purity at each stage of the multistep DF process was quantified by the proposed model. The parameters required as model inputs (k, Fα1, and Fα2) were experimentally determined by permeating PC-containing solution through UF membrane modules (150, 30, and 10 kDa cutoffs). The resulting analytical solutions and those predicted by the model were in close agreement. The PC purity increased from 0.20 to 0.30 when a 10 kDa UF membrane module was used in two-step DF. An orthogonal table was used to determine the combination of UF membrane modules needed to achieve higher purity of PC. The model predicted that the 30 kDa UF membrane module would have the highest contribution to PC productivity and purity at any position in a three-step DF. The developed model can help identify appropriate conditions for separating macromolecules by DF.
Subject(s)
Nostoc commune , Ultrafiltration , Ultrafiltration/methods , Phycocyanin , Proteins , PolysaccharidesABSTRACT
A 120-nm silica suspension was permeated through a porous polyethylene (PE) hollow-fiber membrane, as was a solution of deformable elastic particles of poly(N-isopropylacrylamide) (PNIPAM) gel and dextran. The amount adsorbed and flux of permeation were analyzed with ordinary differential equations to obtain adsorption coefficients, maximum amounts adsorbed, and pore-narrowing factors. The thickness of the "silica-deposited layer" on the membrane was 1 µm. In a batch adsorption mode, 5.0 mg of PNIPAM gel and 30 mg of dextran were adsorbed on the PE membrane, with no adsorption on the silica. The PE membrane pores were narrowed by a secondary layer of adsorbed PNIPAM gel. When filtered through the silica-deposited layer, PNIPAM gel occupies gaps, resulting in a reduced permeation flux. Dextran passed through the silica-deposited layer and was partially adsorbed on the PE membrane. The modified membrane can control adsorption, filtration, and flux permeation, which leads to dynamic membrane separations.