Reversible Electrochromic/Electrofluorochromic Dual Switching in Zn(II)-Based Metallo-Supramolecular Polymer Films.

The introduction of novel materials with multifunctional chromogenic properties, such as electrochromic/electrofluorochromic (EC/EFC) properties, has recently attracted prospective interest in the development of various optoelectronic devices and smart windows. In this study, a novel Zn(II)-based metallo-supramolecular polymer (polyZn) has been developed as an ON/OFF switchable EFC application with prominent EC behavior. In this regard, the polymeric chain of polyZn was first synthesized by 1:1 complexation in a zigzag manner with Zn(II) ions at the metal center and 4,4'-[bis(2,2':6',2″-terpyridinyl)benzene]triphenylamine (LTPY-TPA) as the redox-active ditopic ligand. The polyZn exhibits excellent solubility in organic solvents and can form a very good uniform thin film on an indium tin oxide/glass substrate by spin-coating. In a neutral state, transparent polyZn exhibits a bright yellow color to the naked eye (absorption at ∼325 nm). The electroactive triphenylamine (TPA) core of LTPA-TPY, however, undergoes reversible single-electron oxidation when a positive bias of +1.6 V vs Ag/Ag+ is applied, generating radical cations (TPA ↔ TPA•+) with a significant drop in transparency (77%). A noticeable chromic shift in the hue of the film from brilliant yellow to green was observed with the appearance of a near-infrared absorption band at ∼897 nm with a tail of 1300-1600 nm. Interestingly, in addition to this EC phenomenon, the fabricated solid-state polyZn film exhibits intense, high-contrast reddish-orange photoluminescence with λem = 650 nm, which is significantly desired as a molecular probe for bioimaging. Both the TPA core and the redox-inactive Zn(II)-terpyridine core emit orange-red photoluminescence in polyZn, which is significantly quenched upon the oxidation of the film and is re-emitted at 0.0 V vs Ag/Ag+. This ON/OFF EFC transition was sustained for several cycles. This study should motivate to design and create distinctive new unique materials with combined EC/EFC behavior for the fabrication of optoelectronic devices by combining a metal-fluorescent core with a redox-active spacer.

Nanocomposites of Fe(II)-Based Metallo-Supramolecular Polymer and a Layered Inorganic-Organic Hybrid for Improved Electrochromic Materials.

Fe-based metallo-supramolecular polymer (polyFe), composed of Fe(II) ions and bis(terpyridyl)benzene, is known as a good electrochromic (EC) material. For the first time, to improve the EC properties, we prepared nanocomposites comprising polyFe and a layered inorganic-imidazoline covalently bonded hybrid (LIIm) by simply mixing them in methanol and then examined the effect of the nanocomposition on EC properties. The obtained blue/purple-colored composites (polyFe/LIIm composites) were demonstrated by scanning electron microscopy (SEM) to comprise a structure of LIIm nanoparticles coated with amorphous polyFe. Interestingly, X-ray diffraction (XRD) measurements suggested that there was no intercalation of polyFe in the interlayer space of LIIm. Ultraviolet-visible (UV-vis) spectroscopy measurements demonstrated that light absorption close to 600 nm was attributed to metal-to-ligand charge transfer (MLCT) from the Fe(II) ion to the bisterpyridine ligand and was influenced by LIIm in the composites. The composites exhibited a pair of redox waves, assigned to the redox between Fe(II) and Fe(III), in the cyclic voltammograms; moreover, the composites were estimated to be diffusion controlled. Thin composite films demonstrated reversible EC changes, triggered by the redox reaction of the metal. Furthermore, the results show that the nano-scale composition of the metallo-supramolecular polymers with LIIm can effectively improve the memory properties without reducing the contrast in transmittance (ΔT) of 70-76% in EC changes after applying 1.2 V vs. Ag/Ag+. The EC properties varied with varying ratios (3/0.1, 0.5, 1, and 5) of the polyFe/LIIm, and the ratio of 3/1 exhibited the longest memory and largest MLCT absorption peak among composites. The results show that the polyFe/LIIm composites are useful EC materials for dimming glass applications, such as smart windows.

Ru(II)-Based Metallo-Supramolecular Polymer with Tetrakis(N-methylbenzimidazolyl)bipyridine for a Durable, Nonvolatile, and Electrochromic Device Driven at 0.6 V.

Low-voltage operation, high durability, and long memory time are demanded for electrochromic (EC) display device applications. Metallo-supramolecular polymers (MSPs), composed of a metal ion and ditopic ligand, are one of the recently developed EC materials, and the ligand modification is expected to tune the redox potential of MSP. In order to lower the redox potential of MSP, tetrakis(N-methylbenzimidazolyl)bipyridine (LBip) was designed as an electronically rich ligand. Ru-based MSP (polyRu-LBip) was successfully synthesized by 1:1 complexation of RuCl2(DMSO)4 with LBip. The molecular weight (Mw) was high (8.8 × 106 Da) enough to provide a simple 1H NMR spectrum, of which the proton peaks could be assigned by the comparison with the spectrum of the corresponding mono-Ru complex. The redox potential (E1/2) between Ru(II/III) was 0.51 V versus Ag/Ag+, which was much lower than the redox potential of previously reported Ru-based MSP with bis(terpyridyl)benzene (0.95 V vs Ag/Ag+). The polymer film exhibited reversible, distinct color changes between violet and light green-yellow upon applying very low potentials of 0 and 0.6 V vs Ag/Ag+, respectively. The appearance and disappearance of the metal-to-ligand charge transfer absorption by the electrochemical redox between Ru(II/III) were confirmed using in situ spectro-electrochemical measurement. A solid-state EC device with polyRu-LBip was revealed to have large optical contrast (ΔT 54%), fast response time (1.37 s for bleaching and 0.67 s for coloration), remarkable coloration efficiency (571 cm2/C), and high durability for the repeated color changes more than 20,000 cycles. The device also showed a long optical memory time of up to 19 h to maintain 40% to the initial contrast under the open circuit conditions. It is considered that the stabilization of the Ru(III) state by LBip suppressed the self-coloring to Ru(II) inside the device.

Stepwise introduction of three different transition metals in metallo-supramolecular polymer for quad-color electrochromism.

Metallo-supramolecular polymers (MSPs) show unique electrochemical and optical properties, that are different to organic polymers, caused by electronic interactions between metals and ligands. For the development of quad-color electrochromic materials, here we report the stepwise introduction of three different transition metal ions into an MSP, utilizing the different complexation abilities of the transition metals. An MSP with Os(II), Ru(II), and Fe(II) (polyOsRuFe) was synthesized via a stepwise synthetic route through the formation of an Os(II) complex first, followed by the introduction of Ru(II) to the Os(II) complex, and finally the attachment of Fe(II) to the Os(II)-Ru(II) complex to produce the polymer. This synthetic procedure was extended to fabricate MSPs that comprised Co(II)/Ru(II)/Os(II) and Zn(II)/Ru(II)/Os(II). The synthesized MSPs showed a broad optical and electrochemical window due to the coupling of three heterometallic segments into the polymer. Introducing acetate anion as the counter anion greatly enhanced the solubility of polyOsRuFe in methanol. A thin film of polyOsRuFe was prepared on ITO/glass by spin-coating the methanol solution, and its reversible quad-color electrochromism was demonstrated.

Dual-Redox System of Metallo-Supramolecular Polymers for Visible-to-Near-IR Modulable Electrochromism and Durable Device Fabrication.

Dual-redox metallo-supramolecular polymers with a zigzag structure (polyFe-N and polyRu-N) were successfully synthesized by 1:1 complexation of a redox-active Fe(II) or Ru(II) ion and 4,4-bis(2,2:6,2-terpyridinyl)phenyl-triphenylamine (LTPA) as a redox-active ligand. The polymers had high solubility in methanol, and the polymer solutions showed dark brown (polyFe-N) or orange-red (polyRu-N) coloration. UV-vis spectra of the polymers displayed a strong metal-to-ligand charge transfer (MLCT) absorption in the visible region. Cyclic voltammograms of the polymer films exhibited two pairs of reversible redox waves. The first redox at ∼0.5 V versus Ag/Ag+ was assigned to the redox in the triphenylamine (TPA) moiety of LTPA, and the second redox at 0.8 V versus Ag/Ag+ (polyFe-N) or 0.9 V versus Ag/Ag+ (polyRu-N) was given to the redox of Fe(II)/(III) or Ru(II)/(III), respectively. Upon applying a positive potential of more than 0.5 V versus Ag/Ag+ to the polymer films, a new absorption at ∼820 nm in the near-infrared (NIR) region appeared with wide tailing to the longer wavelength. It is considered that the new absorption in the NIR region is caused by the polaron band of the oxidized ligand in the polymers. When the applied potential was increased to 1.0 V versus Ag/Ag+ (polyFe-N) or 1.1 V versus Ag/Ag+ (polyRu-N), the maximum wavelength of the new absorption in the NIR region shifted to 885-900 nm and the absorbance was further enhanced with disappearance of the MLCT absorption. Eventually, the original colors of the polymers were faint to light green. This visible-to-NIR electrochromism was reversible, and maximum optical contrast (ΔT) reached 52% in the visible region and 80% in the NIR region. A prototype solid-state device with the polymer was fabricated for practical utilization, exhibiting excellent cycle stability of >4000 cycles with maintaining high optical contrast from the visible-to-NIR range.

Synthesis of an Alternated Heterobimetallic Supramolecular Polymer Based on Ru(II) and Fe(II).

A heterobimetallic supramolecular polymer (polyRuFe) with alternately complexed Ru(II) and Fe(II) is prepared following a stepwise synthetic route through harnessing first the strongly binding metal ion Ru(II) and then the weakly binding metal ion Fe(II). A high yield of product is achieved in each step. The heterometal ions are incorporated into the polymer chain in identical coordination environments formed by two 2,2':6',2″-terpyridine moieties. Characterization is accomplished by NMR spectroscopy, MALDI-TOF mass spectrometry, UV-Vis spectroscopy, and cyclic voltammetry. PolyRuFe shows a wide optical window (λ = 311-577 nm) and a broad distinct reversible redox nature of two types, originated from the coupling of the two heterometallic segments into the polymer chain. Such characteristics of polyRuFe suggest its potential for various electrochemical and electro-optical applications.

Dual-Branched Dense Hexagonal Fe(II)-Based Coordination Nanosheets with Red-to-Colorless Electrochromism and Durable Device Fabrication.

Highly dense hexagonal Fe(II)-based coordination nanosheets (CONASHs) were designed by dual-branching, at the metal-coordination moieties and the tritopic ligands, which successfully obtained a liquid/liquid interface by the complexation of Fe(II) ions and the tritopic bidentate ligands. The 1:1 complexation was confirmed by titration. The obtained Fe(II)-based nanosheets were fully characterized by small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). A monolayer of the sheets was obtained, employing the Langmuir-Blodgett (LB) method, and the determined thickness was ∼2.5 nm. The polymer nanosheets exhibited red-to-colorless electrochromism because the electrochemical redox transformation between Fe(II) and Fe (III) ions controlled the appearance/disappearance of the metal (ion)-to-ligand charge-transfer (MLCT) absorption. The poor π-conjugation in the tritopic ligands contributed to the highly colorless electrochromic state. A solid-state device, with the robust polymer film, exhibited excellent electrochromic (EC) properties, with high optical contrast (ΔT > 65%) and high durability after repeated color changes for >15 000 cycles, upon applying low-operating voltages (+1.5/0 V).

Ni(II)-Based Metallosupramolecular Polymer with Carboxylic Acid Groups: A Stable Platform for Smooth Imidazole Loading and the Anhydrous Proton Channel Formation.

The Ni(II)-based metallosupramolecular polymer with carboxylic acid groups (polyNi) was synthesized via a 1:1 complexation of Ni(II) salt with (4,4'-(9,9-dihexyl-9H-fluorene-2,7-diyl)bis(pyridine-2,6-dicarboxylic acid) for the first time. The divalent state of Ni(II) in the polymer was confirmed by the X-ray absorption fine structure analysis. Smooth loading of imidazole molecules into polyNi proceeded with the help of the carboxylic acid groups to form the imidazole-loaded polyNi (polyNi-Im). Thermogravimetric analysis of polyNi-Im revealed that approximately three imidazole molecules were incorporated per repeating unit of polyNi. The Fourier transform infrared spectrum of polyNi-Im showed a new peak at 3219 cm-1, which shows an ∼73 cm-1 enhancement to -N-H of pristine imidazole. The peak suggests the formation of an imidazolium cation in the polymer. Powder X-ray diffraction indicated no degradation of the polymer structure during the imidazole loading because the diffraction pattern of polyNi-Im was almost the same as that of polyNi except for the presence of peaks corresponding to the imidazole molecules. Interestingly, the scanning electron microscopy measurement showed a large morphological change to uniform spherical particles by loading imidazole to the polymer. PolyNi-Im exhibited good proton conductivity (1.05 × 10-2 mS/cm) at a high temperature (120 °C), which is around 7 orders of magnitude higher than that of pristine polyNi because of the proton conduction pathway formation along the polymer chains by the incorporated imidazole molecules.

Transparent Supercapacitor Display with Redox-Active Metallo-Supramolecular Polymer Films.

The use of metallo-supramolecular polymer (MSP) as a thin-film-based redox supercapacitor electrode material is reported for the first time. Fe(II)- and Ru(II)-based MSPs (polyFe and polyRu, respectively) were synthesized by complexation of appropriate metal salts with 4',4″-(1,4-phenylene)bis-2,2':6',2″-terpyridine, and thin films of these polymers were prepared by spray coating onto an indium tin oxide glass substrate. A study of the energy storage performances of the polyFe and polyRu films in a nonaqueous electrolyte system revealed volumetric capacitances of ∼62.6 ± 3 F/cm3 for polyFe and 98.5 ± 7 F/cm3 for polyRu at a current density of 2 A/cm3. To improve the energy storage performance over a wider potential range, asymmetric supercapacitor (ASC) displays were fabricated with suitable combinations of the MSPs as cathodic materials and Prussian blue as the anodic counter material in a sandwich configuration with a transparent polymeric ion gel as the electrolyte. The fabricated ASCs showed a maximum volumetric energy density (∼10-18 mW h/cm3) that was higher than that of lithium thin-film batteries and a power density (7 W/cm3) comparable to that of conventional electrolyte capacitors, with superb cyclic stability for 10 000 cycles. To demonstrate the practical use of the MSP, the illumination of a light-emitting diode bulb was powered by a laboratory-made device. This work should inspire the development of high-performance thin-film flexible supercapacitors based on MSPs as active cathodic materials.

Constructing Alternated Heterobimetallic [Fe(II)/Os(II)] Supramolecular Polymers with Diverse Solubility for Facile Fabrication of Voltage-Tunable Multicolor Electrochromic Devices.

Metallo-supramolecular polymer (MSP)-based electrochromic devices (ECDs) have drawn much attention because of their variable colors and attractive electrochromic (EC) properties. However, fabrication of voltage-tunable multicolor ECDs using single MSP is yet hard to realize. We anticipated alternate introduction of two different redox-active metal ions in an MSP combined with the adjustment of counteranions could be a solution to fabricate multicolor ECDs. The heterometals will induce color variability upon voltage alteration, and counteranions will help to tune the solubility of MSP in different solvents. In an attempt to fulfill this target, we have synthesized four heterobimetallic supramolecular polymers (HBPs) having different counteranions (BF4-, Cl-, PF6-, and OAc-), in which Fe(II) and Os(II) are alternately complexed by two terpyridine units. To apply as EC material, the HBPs should be soluble in methanol and insoluble in acetonitrile for the preparation of EC film as well as ECDs. However, among the HBPs, only HBP-OAc is found to meet this requirement. The EC behaviors of the spray-coating film of HBP-OAc on an indium tin oxide (ITO)-coated glass substrate are investigated in terms of maximum transmittance contrast, coloration voltage, response time, coloration efficiency, and operational stability, which exhibits reversible multicolor electrochromism (the initial purple color of the film is changed to violet followed by greenish-yellow) upon alteration of the voltage from 0.0 to 0.7 V [required to oxidize the Os(II) ion] and to 1.0 V [required to oxidize the Fe(II) ion]. The film is also integrated into a laminated ECD by using lithium-based gel electrolyte. Finally, as a proof-of-concept, a prototype voltage-tunable multicolor EC display (6 cm × 2.5 cm) is fabricated by using a designed image containing a flower, leaves, and a flower pot, which exhibits six different types of multicolor image upon application of tunable voltages.

Reversible four-color electrochromism triggered by the electrochemical multi-step redox of Cr-based metallo-supramolecular polymers.

Four color electrochromism (yellow, magenta, blue, and navy) has been achieved in Cr(iii)-based metallo-supramolecular polymers (polyCr), which were synthesized by 1 : 1 complexation of Cr ions and 1,4-di[[2,2':6',2''-terpyridin]-4'-yl]benzene (L). The polymer structure was determined by X-ray absorption fine structure (XAFS) measurement and X-ray photoelectron spectroscopy (XPS). The molecular weight of polyCr was calculated as 3.2 × 107 Da using right angle light scattering (RALS). The EXAFS fitting indicated that the bond distances of Cr-N are 2.020 Å and 2.208 Å. A film of polyCr shows multi-color electrochromism (EC) or absorption: a sharp peak at 380 nm at 0 V vs. Ag/Ag+ (yellow), a sharp peak at 510 nm and a broad peak at 800 nm at -0.6 V vs. Ag/Ag+ (magenta), a broad peak at 610 nm and between 700-900 nm at -1.2 V vs. Ag/Ag+ (blue), a broad peak between 450-900 nm at -1.8 V vs. Ag/Ag+ (navy). The transmittances change (ΔT), the switching times for coloring and bleaching (T c, T b) and the coloration efficiency (η c, η b): [ΔT, (T c, T b), (η c, η b)] were [39.2%, (5.56 s, 1.39 s), (169 cm2 C-1, 230 cm2 C-1)] at 510 nm between -0.6 and 0.2 V vs. Ag/Ag+, [67.0%, (6.93 s, 2.52 s), (138 cm2 C-1, 172 cm2 C-1)] at 610 nm between -1.2 and 0.2 V vs. Ag/Ag+, [86.1%, (6.80 s, 3.03 s), (167 cm2 C-1, 134 cm2 C-1)] at 780 nm between -1.8 and 0.2 V vs. Ag/Ag+, respectively, during the cycles. The durability experiment indicates that polyCr shows an EC property for at least 100 cycles.

Electrochromic Os-based metallo-supramolecular polymers: electronic state tracking by in situ XAFS, IR, and impedance spectroscopies.

In this study, the electronic states of Os-based metallo-supramolecular polymers (poly(OsL)2+) during electrochromism were tracked by in situ X-ray absorption fine structure (XAFS), infrared (IR), and impedance spectroscopies. The XAFS spectra suggested electronic charge migration in the polymer, and the in situ spectra revealed reversible changes caused by electrochemical redox reactions. The IR spectra of the polymers showed an IVCT band, and we also confirmed the reversible changes by applying a voltage to the redox cell. During the impedance measurements, we found a drastic decrease in the charge transfer resistance (R CT) of the polymer films near the electrochemical redox potential.

Precise Synthesis of Alternate Fe(II)/Os(II)-Based Bimetallic Metallo-Supramolecular Polymer.

A novel terpyridine-based bimetallic metallo-supramolecular polymer (polyFeOs) containing alternately complexed Fe(II) and Os(II) ions is synthesized. For precise synthesis of the polymer, a new three-step synthetic pathway is developed to obtain a high yield (%) of product in each step. The first step is the synthesis of dibromo terpyridine-Os(II) complex in 87% yield, the second step is the synthesis of bisterpyridine ligand containing Os(II) (OsL1) in 74% yield, and the last step is the synthesis of polyFeOs in 90% yield. The polyFeOs exhibits high thermal stability with two degradation temperatures at around 390 and 690 °C, which indicate thermal evaporation of the counter anions (Cl- and BF4 - ) and degradation of the coordination bonds, respectively. The combination of two different metal ions in polyFeOs results in an enlarged optical window (λ = 315-675 nm) and two highly stable reversible redox states, which can be of huge interest for potential optical, electro-optical, and electrochemical applications.

Construction of Coordination Nanosheets Based on Tris(2,2'-bipyridine)-Iron (Fe2+) Complexes as Potential Electrochromic Materials.

The coordination nanosheets (CONASHs) are emerging as a new class of functional two-dimensional materials, which are one of the most active research areas of chemistry and physics in this decade. Despite the success of various structural and functional CONASHs, the development of a new molecular structure to discover alluring functional CONASHs remains challenging. Herein, we report successful preparation of two novel CONASHs (NBP1 and NBP2) through coordination between one of the unexplored molecular frameworks of bis(2,2'-bipyridine)-based ligands (BP1 and BP2) and Fe2+ ions. Using a liquid-liquid interface as a platform, large-scale thin films of multilayer CONASHs have been prepared without any support, which can be deposited onto any desired substrate. Detailed characterization of the CONASHs using various microscopic and spectroscopic techniques reveals homogeneous and flat morphology of nanometer thickness with the quantitative formation of tris(2,2'-bipyridine)-Fe2+ complex motifs in the nanosheet frameworks. The color of the films has been tuned from blue to magenta by the suitable molecular design of the ligands. Owing to the insolubility of the CONASH films in any solvent and the presence of redox-active Fe2+, we explore the functionality of these nanostructured thin films deposited on indium tin oxide as electrochromic materials. The CONASHs exhibit color-to-colorless and color-to-color electrochromic transitions with attractive response times, switching stabilities, and coloration efficiencies. Finally, we demonstrate solid-state electrochromic devices of the CONASHs operated at a potential range of +2.5 to -2.5 V, which are electrochemically stable for several switching cycles, suggesting that these CONASHs are potential electrochromic materials for next-generation display applications.

Slow magnetic relaxation in a Tb(iii)-based coordination polymer.

A Tb(iii)-based coordination polymer (polyTb) was synthesized by complexation of Tb(NO3)3·(6H2O) and 4',4''''-[1,1'-biphenyl]-4,4'-diylbis[6,6''-bis(ethoxycarbonyl)2':6',2''-terpyridine](L). The polymer structure was determined by Job's plots, DFT calculation, and X-ray absorption fine structure (XAFS) measurement. Job's plots indicated that the mole ratio (Tb ion : L) is 1 : 1. The optimized model structures suggested a La model: the LaN6(O[double bond, length as m-dash]C)2 model. The bond distances of La-O and La-N are ∼2.80 Å and 2.60 Å, respectively. The EXAFS fitting indicated that the bond distances of Tb-O and Tb-N are 2.65 Å and 2.95 Å, respectively. polyTb shows field-induced magnetic relaxation in the solid and solution state. The luminescence of polyTb, originating from an f-f transition, was observed (φ = 6.9%). polyTb formed a porous structure on a Si substrate, whereas a fibrous complex structure was formed on glass. polyTb chains are orientated on glass, which were determined by XRD.

Electrochromic Os(II)-Based Metallo-Supramolecular Polymers.

This work presents the preparation of a series of novel Os(II)-based metallo-supramolecular polymers (polyOss: linear polyOsL1100% and hyperbranched polyOsL1x% L2y% ) that show a broad absorption spanning 312 to 677 nm and a low Os(II)/(III) redox potential of 0.94 V. The electrochromic properties of a polyOs film cast on an ITO substrate is investigated. The change in transmittance (ΔT) of polyOsL1100% is 49.9%, and the switching times for coloration (t c ) and bleaching (t b ) are 0.70 and 0.82 s, respectively. The introduction of a 10% branching structure (polyOsL190% L210% ) further enhanced the electrochromic performance with ΔT = 59.4%, t c  = 0.41 s, and t b  = 0.54 s. The coloration efficiency (η) increased from 396.1 to 467.5 cm2  C-1 upon branching. A solid-state electrochromic device with polyOsL1100% is successfully fabricated to use the polymer for potential applications.

Modulation of a coordination structure in a europium(iii)-based metallo-supramolecular polymer for high proton conduction.

Developing high proton conducting solid materials is significant in the field of fuel cells. A europium(iii)-based metallo-supramolecular polymer with uncoordinated carboxylic acids (PolyEu-H) was successfully synthesized by modifying the synthesis conditions. The proton conductivity was enhanced with increasing the relative humidity (RH) from 30 to 95% RH. PolyEu-H showed about 104 times higher proton conductivity than the polymer with coordinated carboxylic acids (PolyEu) and about 400 times higher than the polymer without carboxylic acids (PolyEu-2). The proton conductivity of PolyEu-H reached 4.45 × 10-2 S cm-1 at 95% RH and 25 °C and 5.6 × 10-2 S cm-1 at 75 °C. The activation energy, E a was ultralow (0.04 eV), which indicates proton conduction based on the Grotthuss mechanism. The results indicate that efficient proton conduction occurs through proton channels formed by moisture in PolyEu-H.

Inert Layered Silicate Improves the Electrochemical Responses of a Metal Complex Polymer.

A chemically inert, insulating layered silicate (saponite; SP) and an iron(II)-based metallo-supramolecular complex polymer (polyFe) were combined via electrostatic attraction to improve the electrochromic properties of polyFe. Structural characterization indicated that polyFe was intercalated into the SP nanosheets. Interestingly, the redox potential of polyFe was lowered by combining it with SP, and the current was measurable despite the insulating nature of SP. X-ray photoelectron spectroscopy showed that the decrease in the redox potential observed in the SP-polyFe hybrid was caused by the electrostatic neutralization of the Fe cation in polyFe by the negative charge on SP. Electrochemical analyses indicated that electron transfer occurred through electron hopping across the SP-polyFe hybrid. Control experiments using a metal complex composed of Fe and two 2,2':6',2''-terpyridine ligands (terpyFe) showed that SP contributes to the effective electron hopping. This modulation of the electrochemical properties by the layered silicates could be applied to other electrochemical systems, including hybrids of the redox-active ionic species and ion-exchangeable adsorbents.

Glial fibrillary acidic protein (GFAP) is a novel biomarker for the prediction of autoimmune diabetes.

Glial fibrillary acidic protein (GFAP) is expressed in peri-islet Schwann cells, as well as in glia cells, and has been reported to be an autoantigen candidate for type 1 diabetes mellitus (T1DM). We confirmed that the production of the autoantibodies GFAP and glutamic acid decarboxylase 65 (GAD65) was increased and inversely correlated with the concentration of secreted C peptide in female nonobese diabetic mice (T1DM model). Importantly, the development of T1DM in female nonobese diabetic mice at 30 wk of age was predicted by the positive GFAP autoantibody titer at 17 wk. The production of GFAP and GAD65 autoantibodies was also increased in KK-Ay mice [type 2 diabetes mellitus (T2DM) model]. In patients with diabetes mellitus, GFAP autoantibody levels were increased in patients with either T1DM or T2DM, and were significantly associated with GAD65 autoantibodies but not zinc transporter 8 autoantibodies. Furthermore, we identified a B-cell epitope of GFAP corresponding to the GFAP autoantibody in both mice and patients with diabetes. Thus, these results indicate that autoantibodies against GFAP could serve as a predictive marker for the development of overt autoimmune diabetes.-Pang, Z., Kushiyama, A., Sun, J., Kikuchi, T., Yamazaki, H., Iwamoto, Y., Koriyama, H., Yoshida, S., Shimamura, M., Higuchi, M., Kawano, T., Takami, Y., Rakugi, H., Morishita, R., Nakagumi, H. Glial fibrillary acidic protein (GFAP) is a novel biomarker for the prediction of autoimmune diabetes.

One-Dimensional Anhydrous Proton Conducting Channel Formation at High Temperature in a Pt(II)-Based Metallo-Supramolecular Polymer and Imidazole System.

One dimensional (1D) Pt(II)-based metallo-supramolecular polymer with carboxylic acids (polyPtC) was synthesized using a new asymmetrical ditopic ligand with a pyridine moiety bearing two carboxylic acids. The carboxylic acids in the polymer successfully served as apohosts for imidazole loaded in the polymer interlayer scaffold to generate highly ordered 1D imidazole channels through the metallo-supramolecular polymer chains. The 1D structure of imidazole loaded polymer (polyPtC-Im) was analyzed in detail by thermogravimetric analysis, powder X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and ultraviolet-visible and photoluminescence spectroscopic measurements. PolyPtC-Im exhibited proton conductivity of 1.5 × 10-5 S cm-1 at 120 °C under completely anhydrous conditions, which is 6 orders of magnitude higher than that of the pristine metallo-supramolecular polymer.