ABSTRACT
Multiresponsive materials with reversible and durable characteristics are indispensable because of their promising applications in environmental change detections. To fabricate multiresponsive materials in mass production, however, complex reactions and impractical situations are often involved. Herein, a dual responsive (light and pH) spiropyran-based smart sensor fabricated by a simple layer-by-layer (LbL) assembly process from upcycled thermoplastic polyester elastomer (TPEE) materials derived from recycled polyethylene terephthalate (r-PET) is proposed. Positively charged chitosan solutions and negatively charged merocyanine-COOH (MC-COOH) solutions are employed in the LbL assembly technique, forming the chitosan-spiropyran deposited TPEE (TPEE-CH-SP) film. Upon UV irradiation, the spiropyran-COOH (SP-COOH) molecules on the TPEE-CH-SP film undergo the ring-opening isomerization, along with an apparent color change from colorless to purple, to transform into the MC-COOH molecules. By further exposing the TPEE-CH-MC film to hydrogen chloride (HCl) and nitric acid (HNO3 ) vapors, the MC-COOH molecules can be transformed into protonated merocyanine-COOH (MCH-COOH) with the simultaneous color change from purple to yellow.
ABSTRACT
In recent years, hafnium oxide (HfO2) has gained increasing interest because of its high dielectric constant, excellent thermal stability, and high band gap. Although HfO2 bulk and film materials have been prepared and well-studied, HfO2 fibers, especially hollow fibers, have been less investigated. In this study, we present a facile preparation method for HfO2 hollow fibers through a unique integration of the sol-gel process and electrospinning technique. Initially, polystyrene (PS) fibers are fabricated by using electrospinning, followed by dipping in a HfO2 precursor solution, resulting in HfO2-coated PS fibers. Subsequent thermal treatment at 800 °C ensures the selective pyrolysis of the PS fibers and complete condensation of the HfO2 precursors, forming HfO2 hollow fibers. Scanning electron microscopy (SEM) characterizations reveal HfO2 hollow fibers with rough surfaces and diminished diameters, a transformation attributed to the removal of the PS fibers and the condensation of the HfO2 precursors. Our study also delves into the influence of precursor solution molar ratios, showcasing the ability to achieve smaller HfO2 fiber diameters with reduced precursor quantities. Validation of the material composition is achieved through thermogravimetric analysis (TGA) and energy-dispersive spectroscopy (EDS) mapping. Additionally, X-ray diffraction (XRD) analysis provides insights into the crystallinity of the HfO2 hollow fibers, highlighting a higher crystallinity in fibers annealed at 800 °C compared with those treated at 400 °C. Notably, the HfO2 hollow fibers demonstrate a water contact angle (WCA) of 38.70 ± 5.24°, underscoring the transformation from hydrophobic to hydrophilic properties after the removal of the PS fibers. Looking forward, this work paves the way for extensive research on the surface properties and potential applications of HfO2 hollow fibers in areas such as filtration, energy storage, and memory devices.
ABSTRACT
Composite polymer electrolytes (CPEs) with smart, stimuli-responsive characteristics have gained considerable attention owing to their noninvasive manipulation and applications in future technologies. To address this potential, in this work, we demonstrate photoresponsive composite polymer electrolytes, consisting of gel polymer electrolyte (GPE) and spiropyran-immobilized nanoporous anodic aluminum oxide (SP-AAO) templates. Under UV irradiation, the close SP form isomerizes to the open merocyanine (MC) form, creating extremely polarized AAO surfaces; whereas, under visible light irradiation, the MC form reverts to the SP form, creating neutral surface conditions. The electrostatic interactions between ions and AAO surfaces are investigated by attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Moreover, the behavior of ionic conductivity of the GPE@SP-AAO is found to be consistent with the kinetics of isomerization tracked by UV-Vis spectroscopy. This work provides a promising platform for developing next-generation photoelectronic smart devices.
Subject(s)
Nanopores , Polymers , Benzopyrans , Electrolytes , Indoles , Nitro CompoundsABSTRACT
Ordered arrays of polymer nanostructures have been widely investigated because of their promising applications such as solar-cell devices, sensors, and supercapacitors. It remains a great challenge, however, to manipulate the shapes of individual nanostructures in arrays for tailoring specific properties. In this study, an effective strategy to prepare anisotropic polymer nanopillar arrays via photo-fluidization is presented. Azobenzene-containing polymers (azopolymers) are first infiltrated into the nanopores of ordered anodic aluminum oxide (AAO) templates. After the removal of the AAO templates using weak bases, azopolymer nanopillar arrays can be prepared. Upon exposure of linearly polarized lights, azobenzene groups in the azopolymers undergo trans-cis-trans photoisomerization, causing mass migration and elongation of the nanopillar along with the polarization directions. As a result, anisotropic nanopillar arrays can be fabricated, of which the deformation degrees are controlled by the illumination times. Furthermore, patterned nanopillar arrays can also be constructed with designed photomasks. This work presents a practical and versatile strategy to fabricate arrays of anisotropic nanostructures for future technical applications.
Subject(s)
Aluminum Oxide , Nanopores , Electrodes , Lasers , PolymersABSTRACT
Template wetting methods have been widely applied in the preparation of one-dimensional (1D) polymer nanomaterials. The pattern control using the template wetting methods, however, still remains a great challenge, mainly due to the nonselectivity of the polymers toward the environmental triggering. In this work, we present a facile light-induced nanowetting (LIN) method to fabricate patterned nanoarrays using anodic aluminum oxide (AAO) templates. Photoresponsive azobenzene-containing polymers (azopolymers) that exhibit light-induced reversible solid-to-liquid transitions are used. Upon exposure to ultraviolet lights, the azopolymer chains can wet the nanopores of the AAO templates in a liquid state via capillary force. The azopolymer chains are then solidified by illuminating them with visible lights, resulting in the formation of azopolymer nanoarrays. Notably, using designed photomasks, the patterns of the nanoarrays can be ingeniously controlled with the characteristic of erasable and rewritable nanostructures.
