ABSTRACT
The development of efficient catalysts for the chemical recycling of poly(ethylene terephthalate) (PET) is essential to tackling the global issue of plastic waste. There has been intense interest in heterogeneous catalysts as a sustainable catalyst system for PET depolymerization, having the advantage of easy separation and reuse after the reaction. In this work, we explore heterogeneous catalyst design by comparing metal-ion (Fe3+) and metal-oxide nanoparticle (Fe2O3 NP) catalysts immobilized on mesoporous silica (SiO2) functionalized with different N-containing amine ligands. Quantitative solid-state nuclear magnetic resonance (NMR) spectroscopy confirms successful grafting and elucidates the bonding mode of the organic ligands on the SiO2 surface. The surface amine ligands act as organocatalysts, enhancing the catalytic activity of the active metal species. The Fe2O3 NP catalysts in the presence of organic ligands outperform bare Fe2O3 NPs, Fe3+-ion-immobilized catalysts and homogeneous FeCl3 salts, with equivalent Fe loading. X-ray photoelectron spectroscopy analysis indicates charge transfer between the amine ligands and Fe2O3 NPs and the electron-donating ability of the N groups and hydrogen bonding may also play a role in the higher performance of the amine-ligand-assisted Fe2O3 NP catalysts. Density functional theory (DFT) calculations also reveal that the reactivity of the ion-immobilized catalysts is strongly correlated to the ligand-metal binding energy and that the products in the glycolysis reaction catalyzed by the NP catalysts are stabilized, showing a significant exergonic character compared to single ion-immobilized Fe3+ ions.
ABSTRACT
Combining a two-dimensional (2D) morphology and plasmonic photocatalysis represents an efficient design for light-driven organic transformations. We report a one-pot synthesis of surfactant templated PdAu nanosheets (NSs). Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) analyses show the formation of 2D PdAu structures was initiated through nanoparticle seeds dispersed in the alkyl ammonium salt surfactant which acted as a template for the growth into NSs. The PdAu NSs were used for visible-light-enhanced Suzuki cross coupling. The PdAu bimetallic NSs outperformed monometallic Pd NSs and commercial Pd/C in room-temperature Suzuki cross-coupling reactions. The high catalytic activity is attributed to a combination of the 2D morphology giving rise to plasmon-enhanced catalysis and a high density of surface atoms, the electron-rich Pd surface due to alloying, and the presence of weakly bound amines. A comparative study of surfactant-assisted NSs and CO-assisted NSs was also carried out to assess the influence of surface ligands on the catalytic and photocatalytic enhancement of NSs with similar morphology. The surfactant-assisted NSs showed substantially superior performance compared to the CO-assisted for room-temperature Suzuki coupling reactions.
ABSTRACT
Alloying group IV semiconductors offers an effective way to engineer their electronic properties and lattice dynamics. The incorporation of Sn in Ge permits a transition from an indirect to a direct bandgap semiconductor. Here, by combining polarization, laser power-dependent and temperature-dependent micro-Raman spectroscopy we explore the full lattice dynamics of Ge1-xSnx (x = 0.01, 0.06 and 0.08) alloy nanowires. In the high Sn content samples (x ≥ 0.06), a low-frequency tail and a high-frequency shoulder are observed which are associated with the F2g optical phonon mode of Ge (Ge-Ge mode). The new modes are assigned to the stretching of Ge-Ge bonds due to Sn-induced lattice relaxation and compression, respectively. The symmetry of the observed Raman modes has been studied by polarization-dependent Raman scattering. Nonlinear fitting of the laser power-dependent intensity of the high-frequency Ge-Ge mode in the Ge1-xSnx alloy nanowires with x = 0.06 and 0.08 suggests the activation of a third-order stimulated Raman scattering process, due to the high intensity localized electric field surrounding the Sn clusters. Finally, from the temperature-dependent Raman study, we have estimated the isobaric Grüneisen parameters for all the observed modes.
ABSTRACT
Developing a simple, cheap, and scalable synthetic method for the fabrication of functional nanomaterials is crucial. Carbon-based nanowire nanocomposites could play a key role in integrating group IV semiconducting nanomaterials as anodes into Li-ion batteries. Here, we report a very simple, one-pot solvothermal-like growth of carbonaceous germanium (C-Ge) nanowires in a supercritical solvent. C-Ge nanowires are grown just by heating (380-490 °C) a commercially sourced Ge precursor, diphenylgermane (DPG), in supercritical toluene, without any external catalysts or surfactants. The self-seeded nanowires are highly crystalline and very thin, with an average diameter between 11 and 19 nm. The amorphous carbonaceous layer coating on Ge nanowires is formed from the polymerization and condensation of light carbon compounds generated from the decomposition of DPG during the growth process. These carbonaceous Ge nanowires demonstrate impressive electrochemical performance as an anode material for Li-ion batteries with high specific charge values (>1200 mAh g-1 after 500 cycles), greater than most of the previously reported for other "binder-free" Ge nanowire anode materials, and exceptionally stable capacity retention. The high specific charge values and impressively stable capacity are due to the unique morphology and composition of the nanowires.
ABSTRACT
New semiconducting materials, such as state-of-the-art alloys, engineered composites and allotropes of well-established materials can demonstrate unique physical properties and generate wide possibilities for a vast range of applications. Here we demonstrate, for the first time, the fabrication of a metastable allotrope of Ge, tetragonal germanium (ST12-Ge), in nanowire form. Nanowires were grown in a solvothermal-like single-pot method using supercritical toluene as a solvent, at moderate temperatures (290-330 °C) and a pressure of â¼48 bar. One-dimensional (1D) nanostructures of ST12-Ge were achieved via a self-seeded vapour-liquid-solid (VLS)-like paradigm, with the aid of an in situ formed amorphous carbonaceous layer. The ST12 phase of Ge nanowires is governed by the formation of this carbonaceous structure on the surface of the nanowires and the creation of Ge-C bonds. The crystalline phase and structure of the ST12-Ge nanowires were confirmed by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. The nanowires produced displayed a high aspect ratio, with a very narrow mean diameter of 9.0 ± 1.4 nm, and lengths beyond 4 µm. The ST12-Ge nanowire allotrope was found to have a profound effect on the intensity of the light emission and the directness of the bandgap, as confirmed by a temperature-dependent photoluminescence study.
ABSTRACT
Tin selenide (SnSe), a highly promising layered material, has been garnering particular interest in recent times due to its significant promise for future energy devices. Herein we report a simple solution-phase approach for growing highly crystalline layered SnSe nanoribbons. Polyvinylpyrrolidone (PVP) was used as a templating agent to selectively passivates the (100) and (001) facets of the SnSe nanoribbons resulting in the unique growth of nanoribbons along theirb-axis with a defined zigzag edge state along the sidewalls. The SnSe nanoribbons are few layers thick (â¼20 layers), with mean widths of â¼40 nm, and achievable length of >1µm. Nanoribbons could be produced in relatively high quantities (>150 mg) in a single batch experiment. The PVP coating also offers some resistance to oxidation, with the removal of the PVP seen to lead to the formation of a SnSe/SnOxcore-shell structure. The use of non-toxic PVP to replace toxic amines that are typically employed for other 1D forms of SnSe is a significant advantage for sustainable and environmentally friendly applications. Heat transport properties of the SnSe nanoribbons, derived from power-dependent Raman spectroscopy, demonstrate the potential of SnSe nanoribbons as thermoelectric material.
ABSTRACT
Ge nanowires are playing a big role in the development of new functional microelectronic modules, such as gate-all-around field-effect transistor devices, on-chip lasers and photodetectors. The widely used three-phase bottom-up growth method utilising a foreign catalyst metal or metalloid is by far the most popular for Ge nanowire growth. However, to fully utilise the potential of Ge nanowires, it is important to explore and understand alternative and functional growth paradigms such as self-seeded nanowire growth, where nanowire growth is usually directed by the in situ-formed catalysts of the growth material, i.e., Ge in this case. Additionally, it is important to understand how the self-seeded nanowires can benefit the device application of nanomaterials as the additional metal seeding can influence electron and phonon transport, and the electronic band structure in the nanomaterials. Here, we review recent advances in the growth and application of self-seeded Ge and Ge-based binary alloy (GeSn) nanowires. Different fabrication methods for growing self-seeded Ge nanowires are delineated and correlated with metal seeded growth. This review also highlights the requirement and advantage of self-seeded growth approach for Ge nanomaterials in the potential applications in energy storage and nanoelectronic devices.
ABSTRACT
Ge1-x Sn x nanowires incorporating a large amount of Sn would be useful for mobility enhancement in nanoelectronic devices, a definitive transition to a direct bandgap for application in optoelectronic devices and to increase the efficiency of the GeSn-based photonic devices. Here we report the catalytic bottom-up fabrication of Ge1-x Sn x nanowires with very high Sn incorporation (x > 0.3). These nanowires are grown in supercritical toluene under high pressure (21 MPa). The introduction of high pressure in the vapor-liquid-solid (VLS) like growth regime resulted in a substantial increase of Sn incorporation in the nanowires, with a Sn content ranging between 10 and 35 atom %. The incorporation of Sn in the nanowires was found to be inversely related to nanowire diameter; a high Sn content of 35 atom % was achieved in very thin Ge1-x Sn x nanowires with diameters close to 20 nm. Sn was found to be homogeneously distributed throughout the body of the nanowires, without apparent clustering or segregation. The large inclusion of Sn in the nanowires could be attributed to the nanowire growth kinetics and small nanowire diameters, resulting in increased solubility of Sn in Ge at the metastable liquid-solid interface under high pressure. Electrical investigation of the Ge1-x Sn x (x = 0.10) nanowires synthesized by the supercritical fluid approach revealed their potential in nanoelectronics and sensor-based applications.
ABSTRACT
Nanopatterns can readily be formed by annealing block copolymers (BCPs) in organic solvents at moderate or high temperatures. However, this approach can be challenging from an environmental and industrial point of view. Herein, we describe a simple and environmentally friendly alternative to achieve periodically ordered nanoscale phase separated BCP structures. Asymmetric polystyrene-b-poly(ethylene oxide) (PS-b-PEO) thin film patterns of different molecular weight were achieved by annealing in supercritical carbon dioxide (sc-CO2). Microphase separation of PS-b-PEO (16,000-5000) film patterns were achieved by annealing in scCO2 at a relatively low temperature was previously reported by our group. The effects of annealing temperature, time and depressurisation rates for the polymer system were also discussed. In this article, we have expanded this study to create new knowledge on the structural and dimensional evolution of nanohole and line/space surface periodicity of four other different molecular weights PS-b-PEO systems. Periodic, well defined, hexagonally ordered films of line and hole patterns were obtained at low CO2 temperatures (35-40 °C) and pressures (1200-1300 psi). Further, the changes in morphology, ordering and feature sizes for a new PS-b-PEO system (42,000-11,500) are discussed in detail upon changing the scCO2 annealing parameters (temperature, film thickness, depressurization rates, etc.). In relation to our previous reports, the broad annealing temperature and depressurisation rate were explored together for different film thicknesses. In addition, the effects of SCF annealing for three other BCP systems (PEO-b-PS, PS-b-PDMS, PS-b-PLA) is also investigated with similar processing conditions. The patterns were also generated on a graphoepitaxial substrate for device application.
ABSTRACT
Controlling the morphology of noble metal-based nanostructures is a powerful strategy for optimizing their catalytic performance. Here, we report a one-pot aqueous synthesis of versatile NiPd nanostructures at room temperature without employing organic solvents or surfactants. The synthesis can be tuned to form zero-dimensional (0D) architectures, such as core-shell and hollow nanoparticles (NPs), as well as nanostructures with higher dimensionality, such as extended nanowire networks and three-dimensional (3D) nanodendrites. The diverse morphologies were successfully obtained through modification of the HCl concentration in the Pd precursor solution, and the reaction aging time. An in-depth understanding of the formation mechanism and morphology evolution are described in detail. A key factor in the structural evolution of the nanostructures was the ability to tune the reduction rate and to protonate the citrate stabiliser by adding HCl. Spherical core-shell NPs were formed by the galvanic replacement-free deposition of Pd on Ni NPs which can be transformed to hollow NPs via a corrosion process. High concentrations of HCl led to the transition of isotropic spherical NPs into anisotropic wormlike nanowire networks, created through an oriented attachment process. Aging of these nanowire networks resulted in the formation of 3D porous nanodendrites via a corrosion process. The diverse structures of NiPd NPs were anchored onto acid treated-activated carbon (AC) and exhibited improved catalytic efficiency towards the hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP).
ABSTRACT
Atomic and molecular level interactions in solutions dictate the structural and functional attributes of crystals. These features clearly dictate the properties of materials and their applicability in technologies. However, the microscopic phenomena of particle formation-nucleation and growth-in real systems are still not fully understood. Specifically, crystallisation occurring in closed systems are largely unproven. Combining coherent experimental data, we here demonstrate a fundamental nucleation-growth mechanism that occurs in a model zinc oxide system when particles are formed under continuous, rapid heating under closed reaction conditions. Defying all previous reports, we show that the nucleation commences only when the heating is terminated. A prenucleation clusters pathway is observed for nucleation, followed by crystallite assembly-growth. We show that the nucleation-growth processes result from temporal and dynamic activity of constituent ions and gaseous molecules in solution and by the irreversible expulsion of the dissolved gaseous molecules. We suggest that this nucleation process is generic to most closed systems that go through precipitation, and, therefore, important for the crystallisation of a variety of metal oxides, composites and minerals. We anticipate that the work may be a platform for future experimental and theoretical investigation promoting deeper understanding of the nucleation-growth phenomena of a variety of practical systems.
ABSTRACT
Black phosphorus (BP) has extraordinary properties, but its ambient instability remains a critical challenge. Functionalization has been employed to overcome the sensitivity of BP to ambient conditions while preserving its properties. Herein, a simultaneous exfoliation-functionalization process is reported that functionalizes BP flakes during exfoliation and thus provides increased protection, which can be attributed to minimal exposure of the flakes to ambient oxygen and water. A tetrabutylammonium salt was employed for intercalation of BP, resulting in the formation of flakes with large lateral dimensions. The addition of an aryl iodide or an aryl iodonium salt to the exfoliation solvent creates a scalable strategy for the production of functionalized few-layer BP flakes. The ambient stability of functionalized BP was prolonged to a period of one week, as revealed by STEM, AFM, and X-ray photoelectron spectroscopy.
ABSTRACT
Reported here is a new chemical route for the wet chemical functionalization of germanium (Ge), whereby arsanilic acid is covalently bound to a chlorine (Cl)-terminated surface. This new route is used to deliver high concentrations of arsenic (As) dopants to Ge, via monolayer doping (MLD). Doping, or the introduction of Group III or Group V impurity atoms into the crystal lattice of Group IV semiconductors, is essential to allow control over the electronic properties of the material to enable transistor devices to be switched on and off. MLD is a diffusion-based method for the introduction of these impurity atoms via surface-bound molecules, which offers a nondestructive alternative to ion implantation, the current industry doping standard, making it suitable for sub-10 nm structures. Ge, given its higher carrier mobilities, is a leading candidate to replace Si as the channel material in future devices. Combining the new chemical route with the existing MLD process yields active carrier concentrations of dopants (>1 × 1019 atoms/cm3) that rival those of ion implantation. It is shown that the dose of dopant delivered to Ge is also controllable by changing the size of the precursor molecule. X-ray photoelectron spectroscopy (XPS) data and density functional theory (DFT) calculations support the formation of a covalent bond between the arsanilic acid and the Cl-terminated Ge surface. Atomic force microscopy (AFM) indicates that the integrity of the surface is maintained throughout the chemical procedure, and electrochemical capacitance voltage (ECV) data shows a carrier concentration of 1.9 × 1019 atoms/cm3 corroborated by sheet resistance measurements.
ABSTRACT
Electric field enhancement in semiconductor nanostructures offers a possibility to find an alternative to the metallic particles which is well known for tuning the light-matter interaction due to its strong polarizability and size-dependent surface plasmon resonance energy. Raman spectroscopy is a powerful technique to monitor the electric field as its scattering depends on the electromagnetic eigenmode of the particle. Here, we observe enhanced polarized Raman scattering from germanium nanowires of different diameters. The incident electromagnetic radiation creates a distribution of the internal electric field inside the naowires which can be enhanced by manipulating the nanowire diameter, the incident electric field and its polarization. Our estimation of the enhancement factor, including its dependence on nanowire diameter, agrees well with the Mie theory for an infinite cylinder. Furthermore, depending on diameter of nanowire and wavelength of incident radiation, polarized Raman study shows dipolar (antenna effect) and quadrupolar resonances, which has never been observed in germanium nanowire. We attempt to understand this polarized Raman behavior using COMSOL Multiphysics simulation, which suggests that the pattern observed is due to photon confinement within the nanowires. Thus, the light scattering direction can be toggled by tuning the polarization of incident excitation and diameter of non plasmonic nanowire.
ABSTRACT
Continued scaling of electronic devices shows the need to incorporate high mobility alternatives to silicon, the cornerstone of the semiconductor industry, into modern field effect transistor (FET) devices. Germanium is well-poised to serve as the channel material in FET devices as it boasts an electron and hole mobility more than twice and four times that of Si, respectively. However, its unstable native oxide makes its passivation a crucial step toward its potential integration into future FETs. The International Roadmap for Devices and Systems (IRDS) predicts continued aggressive scaling not only of the device size but also of the pitch in nanowire arrays. The development of a vapor-phase chemical passivation technique will be required to prevent the collapse of these structures that can occur because of the surface tension and capillary forces that are experienced when tight-pitched nanowire arrays are processed via liquid-phase chemistry. Reported here is a vapor-phase process using hexanethiol for the passivation of planar Ge(100) substrates. Results benchmarking it against its well-established liquid-phase equivalent are also presented. X-ray photoelectron spectroscopy was used to monitor the effectiveness of the developed vapor-phase protocol, where the presence of oxide was monitored at 0, 24, and 168 h. Water contact angle measurements compliment these results by demonstrating an increase in hydrophobicity of the passivated substrates. Atomic force microscopy monitored the surface topology before and after processing to ensure the process does not cause roughening of the surface, which is critical to demonstrate suitability for nanostructures. It is shown that the 200 min vapor-phase passivation procedure generates stable, passivated surfaces with less roughness than the liquid-phase counterpart.
ABSTRACT
Patterned films are essential to the commonplace technologies of modern life. However, they come at high cost to the planet, being produced from non-renewable, petrochemical-derived polymers and utilising substrates that require harsh, top-down etching techniques. Biopolymers offer a cheap, sustainable and viable alternative easily integrated into existing production techniques. We describe a simple method for the production of patterned biopolymer surfaces and the assignment of each biopolymer domain, which allows for selective metal incorporation used in many patterning applications. Protein and polysaccharide domains were identified by selective etching and metal incorporation; a first for biopolymer blends. Morphologies akin to those observed with synthetic polymer blends and block-copolymers were realised across a large range of feature diameter (200â¯nm to - 20⯵m) and types (salami structure, continuous, porous and droplet-matrix). The morphologies of the films were tuneable with simple recipe changes, highlighting that these biopolymer blends are a feasible alternative to traditional polymers when patterning surfaces. The protein to polysaccharide ratio, viscosity, casting method and spin speed were found to influence the final film morphology. High protein concentrations generally resulted in porous structures whereas higher polysaccharide concentrations resulted in spherical discontinuous domains. Low spin speed conditions resulted in growth of protuberances ranging from 200â¯nm to 22⯵m in diameter, while higher spin speeds resulted in more monodisperse features, with smaller maximal diameter structures ranging from 300â¯nm to 12.5⯵m.
Subject(s)
Nanoparticles/chemistry , Polysaccharides/chemistry , Serum Albumin, Bovine/chemistry , Animals , Cattle , Particle Size , Surface PropertiesABSTRACT
The combination of two active Li-ion materials (Ge and Sn) can result in improved conduction paths and higher capacity retention. Here we report for the first time, the implementation of Ge1-x Sn x alloy nanowires as anode materials for Li-ion batteries. Ge1-x Sn x alloy nanowires have been successfully grown via vapor-liquid-solid technique directly on stainless steel current collectors. Ge1-x Sn x (x = 0.048) nanowires were predominantly seeded from the Au0.80Ag0.20 catalysts with negligible amount of growth was also directly catalyzed from stainless steel substrate. The electrochemical performance of the the Ge1-x Sn x nanowires as an anode material for Li-ion batteries was investigated via galvanostatic cycling and detailed analysis of differential capacity plots (DCPs). The nanowire electrodes demonstrated an exceptional capacity retention of 93.4% from the 2nd to the 100th charge at a C/5 rate, while maintaining a specific capacity value of â¼921 mAh g-1 after 100 cycles. Voltage profiles and DCPs revealed that the Ge1-x Sn x nanowires behave as an alloying mode anode material, as reduction/oxidation peaks for both Ge and Sn were observed, however it is clear that the reversible lithiation of Ge is responsible for the majority of the charge stored.
ABSTRACT
Germanium tin (GeSn) has been proposed as a promising material for electronic and optical applications due to the formation of a direct band-gap at a Sn content >7 at%. Furthermore, the ability to manipulate the properties of GeSn at the nanoscale will further permit the realisation of advanced mechanical devices. Here we report for the first time the mechanical properties of GeSn nanowires (7.1-9.7 at% Sn) and assess their suitability as nanoelectromechanical (NEM) switches. Electron microscopy analysis showed the nanowires to be single crystalline, with surfaces covered by a thin native amorphous oxide layer. Mechanical resonance and bending tests at different boundary conditions were used to obtain size-dependent Young's moduli and to relate the mechanical characteristics of the alloy nanowires to geometry and Sn incorporation. The mechanical properties of the GeSn nanowires make them highly promising for applications in next generation NEM devices.
ABSTRACT
Here we describe a simple way to create a gold nanoparticle (AuNP)-based non-viral delivery system to deliver siRNA into prostate cancer cells. Therefore, positively charged polyethylenimine (PEI)-capped AuNPs were synthesized in water and further conjugated with the targeting ligand (folic acid) for folate receptors (AuNPs-PEI-FA). The AuNPs-PEI-FA could effectively complex small interfering RNA (siRNA) through electrostatic interaction. Flow cytometry displayed that AuNPs-PEI-FA could specifically deliver siRNA into LNCaP cells, a prostate cancer cell line overexpressing prostate-specific membrane antigen (PSMA) that exhibits a hydrolase enzymatic activity with a folate substrate. In contrast, internalization of siRNA into PC-3 cells, a prostate cancer cell line not expressing PSMA or folate receptors, was not achieved using AuNPs-PEI-FA.siRNA. Following endolysosomal escape, the AuNPs-PEI-FA-.siRNA formulation resulted in significant endogenous gene silencing when compared to the nontargeted formulation, suggesting the potential of AuNPs-PEI-FA for targeted delivery of therapeutic siRNAs in the treatment of prostate cancer.
Subject(s)
Gene Transfer Techniques , Metal Nanoparticles/chemistry , Prostatic Neoplasms/therapy , RNA, Small Interfering/genetics , Cell Line, Tumor , Cell Survival/drug effects , Gene Silencing/drug effects , Gold/chemistry , Humans , Male , Metal Nanoparticles/therapeutic use , Prostatic Neoplasms/genetics , Prostatic Neoplasms/pathology , RNA, Small Interfering/chemistry , RNA, Small Interfering/therapeutic useABSTRACT
Silicon nanowire (Si NW) sensors have attracted great attention due to their ability to provide fast, low-cost, label-free, real-time detection of chemical and biological species. Usually configured as field effect transistors (FETs), they have already demonstrated remarkable sensitivity with high selectivity (through appropriate functionalisation) towards a large number of analytes in both liquid and gas phases. Despite these excellent results, Si NW FET sensors have not yet been successfully employed to detect single molecules of either a chemical or biological target species. Here we show that sensors based on silicon junctionless nanowire transistors (JNTs), the simplest possible transistors, are capable of detecting the protein streptavidin at a concentration as low as 580 zM closely approaching the single molecule level. This ultrahigh detection sensitivity is due to the intrinsic advantages of junctionless devices over conventional FETs. Apart from their superior functionality, JNTs are much easier to fabricate by standard microelectronic processes than transistors containing p-n junctions. The ability of JNT sensors to detect ultra-low concentrations (in the zeptomolar range) of target species, and their potential for low-cost mass production, will permit their deployment in numerous environments, including life sciences, biotechnology, medicine, pharmacology, product safety, environmental monitoring and security.