ABSTRACT
It is currently unknown if surgeons and biomaterial scientists &or tissue engineers (BS&orTE) process and evaluate information in similar or different (un)biased ways. For the gold standard of surgery to move "from bench to bedside," there must naturally be synergies between these key stakeholders' perspectives. Because only a small number of biomaterials and tissue engineering innovations have been translated into the clinic today, we hypothesized that this lack of translation is rooted in the psychology of surgeons and BS&orTE. Presently, both clinicians and researchers doubt the compatibility of surgery and research in their daily routines. This has led to the use of a metaphorical expression "squaring of the circle," which implies an unsolvable challenge. As bone tissue engineering belongs to the top five research areas in tissue engineering, we choose the field of bone defect treatment options for our bias study. Our study uses an online survey instrument for data capture such as incorporating a behavioral economics cognitive framing experiment methodology. Our study sample consisted of surgeons (n = 208) and BS&orTE (n = 59). And we used a convenience sampling method, with participants (conference attendants) being approached both in person and through email between October 22, 2022, and March 13, 2023. We find no distinct positive-negative cognitive framing differences by occupation. That is, any framing bias present in this surgical decision-making setting does not appear to differ significantly between surgeon and BS&orTE specialization. When we explored within-group differences by frames, we see statistically significant (p < 0.05) results for surgeons in the positive frame ranking autologous bone graft transplantation lower than surgeons in the negative frame. Furthermore, surgeons in the positive frame rank Ilizarov bone transport method higher than surgeons in the negative frame (p < 0.05).
ABSTRACT
OBJECTIVE: Distances and angles measured from long-leg radiographs (LLR) are important for surgical decision-making. However, projectional radiography suffers from distortion, potentially generating differences between measurement and true anatomical dimension. These phenomena are not uniform between conventional radiography (CR) digital radiography (DR) and fan-beam technology (EOS). We aimed to identify differences between these modalities in an experimental setup. MATERIALS AND METHODS: A hemiskeleton was stabilized using an external fixator in neutral, valgus and varus knee alignment. Ten images were acquired for each alignment and each modality: one CR setup, two different DR systems, and an EOS. A total of 1680 measurements were acquired and analyzed. RESULTS: We observed great differences for dimensions and angles between the 4 modalities. Femoral head diameter measurements varied in the range of > 5 mm depending on the modality, with EOS being the closest to the true anatomical dimension. With functional leg length, a difference of 8.7% was observed between CR and EOS and with the EOS system being precise in the vertical dimension on physical-technical grounds, this demonstrates significant projectional magnification with CR-LLR. The horizontal distance between the medial malleoli varied by 20 mm between CR and DR, equating to 21% of the mean. CONCLUSIONS: Projectional distortion resulting in variations approaching 21% of the mean indicate, that our confidence on measurements from standing LLR may not be justified. It appears likely that among the tested equipment, EOS-generated images are closest to the true anatomical situation most of the time.
Subject(s)
Radiographic Image Enhancement , Humans , Radiographic Image Enhancement/methods , Standing Position , Leg/diagnostic imaging , Patient Positioning/methodsABSTRACT
The treatment of bone defects remains a challenging clinical problem with high reintervention rates, morbidity, and resulting significant healthcare costs. Surgical techniques are constantly evolving, but outcomes can be influenced by several parameters, including the patient's age, comorbidities, systemic disorders, the anatomical location of the defect, and the surgeon's preference and experience. The most used therapeutic modalities for the regeneration of long bone defects include distraction osteogenesis (bone transport), free vascularized fibular grafts, the Masquelet technique, allograft, and (arthroplasty with) mega-prostheses. Over the past 25 years, three-dimensional (3D) printing, a breakthrough layer-by-layer manufacturing technology that produces final parts directly from 3D model data, has taken off and transformed the treatment of bone defects by enabling personalized therapies with highly porous 3D-printed implants tailored to the patient. Therefore, to reduce the morbidities and complications associated with current treatment regimens, efforts have been made in translational research toward 3D-printed scaffolds to facilitate bone regeneration. Three-dimensional printed scaffolds should not only provide osteoconductive surfaces for cell attachment and subsequent bone formation but also provide physical support and containment of bone graft material during the regeneration process, enhancing bone ingrowth, while simultaneously, orthopaedic implants supply mechanical strength with rigid, stable external and/or internal fixation. In this perspective review, we focus on elaborating on the history of bone defect treatment methods and assessing current treatment approaches as well as recent developments, including existing evidence on the advantages and disadvantages of 3D-printed scaffolds for bone defect regeneration. Furthermore, it is evident that the regulatory framework and organization and financing of evidence-based clinical trials remains very complex, and new challenges for non-biodegradable and biodegradable 3D-printed scaffolds for bone regeneration are emerging that have not yet been sufficiently addressed, such as guideline development for specific surgical indications, clinically feasible design concepts for needed multicentre international preclinical and clinical trials, the current medico-legal status, and reimbursement. These challenges underscore the need for intensive exchange and open and honest debate among leaders in the field. This goal can be addressed in a well-planned and focused stakeholder workshop on the topic of patient-specific 3D-printed scaffolds for long bone defect regeneration, as proposed in this perspective review.
ABSTRACT
PURPOSE: Derotation varisation osteotomy of the proximal femur in pediatric patients usually relies on 2-dimensional X-ray imaging, as CT and MRI still are disadvantageous when applied in small children either due to a high radiation exposure or the need of anesthesia. This work presents a radiation-free non-invasive tool to 3D-reconstruct the femur surface and measure relevant angles for orthopedic diagnosis and surgery planning from 3D ultrasound scans instead. METHODS: Multiple tracked ultrasound recordings are segmented, registered and reconstructed to a 3D femur model allowing for manual measurements of caput-collum-diaphyseal (CCD) and femoral anteversion (FA) angles. Novel contributions include the design of a dedicated phantom model to mimic the application ex vivo, an iterative registration scheme to overcome movements of a relative tracker only attached to the skin, and a technique to obtain the angle measurements. RESULTS: We obtained sub-millimetric surface reconstruction accuracy from 3D ultrasound on a custom 3D-printed phantom model. On a pre-clinical pediatric patient cohort, angular measurement errors were [Formula: see text] and eventually [Formula: see text] for CCD and FA angles, respectively, both within the clinically acceptable range. To obtain these results, multiple refinements of the acquisition protocol were necessary, ultimately reaching success rates of up to 67% for achieving sufficient surface coverage and femur reconstructions that allow for geometric measurements. CONCLUSION: Given sufficient surface coverage of the femur, clinically acceptable characterization of femoral anatomy is feasible from non-invasive 3D ultrasound. The acquisition protocol requires leg repositioning, which can be overcome using the presented algorithm. In the future, improvements of the image processing pipeline and more extensive surface reconstruction error assessments could enable more personalized orthopedic surgery planning using cutting templates.
Subject(s)
Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Humans , Child , Imaging, Three-Dimensional/methods , Radiography , Femur/diagnostic imaging , Femur/surgery , OsteotomyABSTRACT
Objectives: Endoprosthetic loosening still plays a major role in orthopaedic and dental surgery and includes various cellular immune processes within peri-implant tissues. Although the dental and orthopaedic processes vary in certain parts, the clinical question arises whether there are common immune regulators of implant loosening. Analyzing the key gene expressions common to both processes reveals the mechanisms of osteoclastogenesis within periprosthetic tissues of orthopaedic and dental origin. Methods: Donor peripheral blood mononuclear cells (PBMCs) and intraoperatively obtained periprosthetic fibroblast-like cells (PPFs) were (co-)cultured with [± macrophage-colony stimulating factor (MCSF) and Receptor Activator of NF-κB ligand (RANKL)] in transwell and monolayer culture systems and examined for osteoclastogenic regulations [MCSF, RANKL, osteoprotegerin (OPG), and tumor necrosis factor alpha (TNFα)] as well as the ability of bone resorption. Sequencing analysis compared dental and orthopaedic (co-)cultures. Results: Monolayer co-cultures of both origins expressed high levels of OPG, resulting in inhibition of osteolysis shown by resorption assay on dentin. The high OPG-expression, low RANKL/OPG ratios and a resulting inhibition of osteolysis were displayed by dental and orthopaedic PPFs in monolayer even in the presence of MCSF and RANKL, acting as osteoprotective and immunoregulatory cells. The osteoprotective function was only observed in monolayer cultures of dental and orthopaedic periprosthetic cells and downregulated in the transwell system. In transwell co-cultures of PBMCs/PPFs profound changes of gene expression, with a significant decrease of OPG (20-fold dental versus 100 fold orthopaedic), were identified. Within transwell cultures, which offer more in vivo like conditions, RANKL/OPG ratios displayed similar high levels to the original periprosthetic tissue. For dental and orthopaedic implant loosening, overlapping findings in principal component and heatmap analysis were identified. Conclusions: Thus, periprosthetic osteoclastogenesis may be a correlating immune process in orthopaedic and dental implant failure leading to comparable reactions with regard to osteoclast formation. The transwell cultures system may provide an in vivo like model for the exploration of orthopaedic and dental implant loosening.
Subject(s)
Dental Implants , Osteolysis , Gene Expression Regulation , Humans , Leukocytes, Mononuclear , Osteoclasts/metabolism , Osteolysis/genetics , Osteolysis/metabolismABSTRACT
Current xenograft animal models fail to accurately replicate the complexity of human bone disease. To gain translatable and clinically valuable data from animal models, new in vivo models need to be developed that mimic pivotal aspects of human bone physiology as well as its diseased state. Above all, an advanced bone disease model should promote the development of new treatment strategies and facilitate the conduction of common clinical interventional procedures. Here we describe the development and characterisation of an orthotopic humanised tissue-engineered osteosarcoma (OS) model in a recently genetically engineered x-linked severe combined immunodeficient (X-SCID) rat. For the first time in a genetically modified rat, our results show the successful implementation of an orthotopic humanised tissue-engineered bone niche supporting the growth of a human OS cell line including its metastatic spread to the lung. Moreover, we studied the inter- and intraspecies differences in ultrastructural composition of bone and calcified tissue produced by the tumour, pointing to the crucial role of humanised animal models.
Subject(s)
Bone Neoplasms , Osteosarcoma , Animals , Bone Neoplasms/secondary , Bone and Bones/pathology , Cell Line , Cell Line, Tumor , Humans , Osteosarcoma/drug therapy , Rats , Tissue EngineeringABSTRACT
PURPOSE: The Coronavirus Disease 2019 (COVID-19) may result not only in acute symptoms such as severe pneumonia, but also in persisting symptoms after months. Here we present a 1 year follow-up of a patient with a secondary tension pneumothorax due to COVID-19 pneumonia. CASE PRESENTATION: In May 2020, a 47-year-old male was admitted to the emergency department with fever, dry cough, and sore throat as well as acute chest pain and shortness of breath. Sputum testing (polymerase chain reaction, PCR) and computed tomography (CT) confirmed infection with the severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2). Eleven days after discharge, the patient returned to the emergency department with pronounced dyspnoea after coughing. CT showed a right-sided tension pneumothorax, which was relieved by a chest drain (Buelau) via mini open thoracotomy. For a period of 3 months following resolution of the pneumothorax the patient complained of fatigue with mild joint pain and dyspnoea. After 1 year, the patient did not suffer from any persisting symptoms. The pulmonary function and blood parameters were normal, with the exception of slightly increased levels of D-Dimer. The CT scan revealed only discrete ground glass opacities (GGO) and subpleural linear opacities. CONCLUSION: Tension pneumothorax is a rare, severe complication of a SARS-CoV-2 infection but may resolve after treatment without negative long-term sequelae. LEVEL OF EVIDENCE: V.
Subject(s)
COVID-19 , Pneumothorax , COVID-19/complications , Chest Tubes/adverse effects , Follow-Up Studies , Humans , Male , Middle Aged , Pneumothorax/diagnosis , Pneumothorax/etiology , Pneumothorax/therapy , SARS-CoV-2ABSTRACT
Prostate cancer (PCa) is the second most commonly diagnosed cancer in men, and bone is the most frequent site of metastasis. The tumor microenvironment (TME) impacts tumor growth and metastasis, yet the role of the TME in PCa metastasis to bone is not fully understood. We used a tissue-engineered xenograft approach in NOD-scid IL2Rγnull (NSG) mice to incorporate two levels of humanization; the primary tumor and TME, and the secondary metastatic bone organ. Bioluminescent imaging, histology, and immunohistochemistry were used to study metastasis of human PC-3 and LNCaP PCa cells from the prostate to tissue-engineered bone. Here we show pre-seeding scaffolds with human osteoblasts increases the human cellular and extracellular matrix content of bone constructs, compared to unseeded scaffolds. The humanized prostate TME showed a trend to decrease metastasis of PC-3 PCa cells to the tissue-engineered bone, but did not affect the metastatic potential of PCa cells to the endogenous murine bones or organs. On the other hand, the humanized TME enhanced LNCaP tumor growth and metastasis to humanized and murine bone. Together this demonstrates the importance of the TME in PCa bone tropism, although further investigations are needed to delineate specific roles of the TME components in this context.
Subject(s)
Bone Neoplasms/secondary , Prostatic Neoplasms/pathology , Tissue Engineering , Tumor Microenvironment , Animals , Humans , Male , Mice , Mice, Inbred NOD , Mice, SCID , Neoplasm MetastasisABSTRACT
BACKGROUND: Mobilization on the day of surgery after total hip arthroplasty (THA) is widely used. However, elderly, obese and severely diseased patients are often excluded from early mobilization. Therefore, it was our aim to investigate the effect of mobilization on the day of surgery with focus on these patients. METHODS: 167 patients underwent THA via direct anterior approach. Exclusion criterion was the use of wound drainage. The patients were randomly allocated to two groups. Day 0 group was mobilized 4 hours after surgery, day 1 group the day after surgery. Primary outcome was the time to readiness for discharge (TRD). Secondary outcome was the occurrence of adverse events (vertigo, nausea, vomiting, severe pain) on the day of surgery. Group comparisons were calculated with respect to elderly (age ≥75 years), obese (BMI ≥30 kg/m2) and severely diseased patients (ASA≥3). RESULTS: TRD was shorter in day 0 group (3.25 vs 3.99 days, P < .01). The rate of adverse events on the day of surgery was similar in both groups (0.28 vs 0.25, P = .73). TRD differences were higher within all subgroups (3.85vs4.81; 3.25vs4.39; 4.08vs5.11days) while the rate of immediate adverse events was reduced (0.15vs0.24; 0.25vs0.3; 0.25vs0.33). Within 90 days 3 patients of group 0 underwent revision surgery, none of group 1 (P = .12). CONCLUSION: Mobilization on the day of surgery reduces the TRD without increasing the rate of immediate adverse events, regardless of age, BMI and ASA score. Future studies are needed to investigate if early mobility increases the 90-days complication rate.
Subject(s)
Arthroplasty, Replacement, Hip , Aged , Arthroplasty, Replacement, Hip/adverse effects , Early Ambulation , Humans , Obesity/complications , Reoperation , Retrospective StudiesABSTRACT
BACKGROUND: While supraspinatus atrophy can be described according to the system of Zanetti or Thomazeau there is still a lack of characterization of isolated subscapularis muscle atrophy. The aim of this study was to describe patterns of muscle atrophy following repair of isolated subscapularis (SSC) tendon. METHODS: Forty-nine control shoulder MRI scans, without rotator cuff pathology, atrophy or fatty infiltration, were prospectively evaluated and subscapularis diameters as well as cross sectional areas (complete and upper half) were assessed in a standardized oblique sagittal plane. Calculation of the ratio between the upper half of the cross sectional area (CSA) and the total CSA was performed. Eleven MRI scans of patients with subscapularis atrophy following isolated subscapularis tendon tears were analysed and cross sectional area ratio (upper half /total) determined. To guarantee reliable measurement of the CSA and its ratio, bony landmarks were also defined. All parameters were statistically compared for inter-rater reliability, reproducibility and capacity to quantify subscapularis atrophy. RESULTS: The mean age in the control group was 49.7 years (± 15.0). The mean cross sectional area (CSA) was 2367.0 mm2 (± 741.4) for the complete subscapularis muscle and 1048.2 mm2 (± 313.3) for the upper half, giving a mean ratio of 0.446 (± 0.046). In the subscapularis repair group the mean age was 56.7 years (± 9.3). With a mean cross sectional area of 1554.7 mm2 (± 419.9) for the complete and of 422.9 mm2 (± 173.6) for the upper half of the subscapularis muscle, giving a mean CSA ratio of 0.269 (± 0.065) which was seen to be significantly lower than that of the control group (p < 0.05). CONCLUSION: Analysis of typical atrophy patterns of the subscapularis muscle demonstrates that the CSA ratio represents a reliable and reproducible assessment tool in quantifying subscapularis atrophy. We propose the classification of subscapularis atrophy as Stage I (mild atrophy) in case of reduction of the cross sectional area ratio < 0.4, Stage II (moderate atrophy) in case of < 0.35 and Stage III (severe atrophy) if < 0.3.
Subject(s)
Rotator Cuff Injuries , Rotator Cuff , Arthroscopy , Humans , Magnetic Resonance Imaging , Middle Aged , Muscular Atrophy/diagnostic imaging , Muscular Atrophy/pathology , Reproducibility of Results , Rotator Cuff/diagnostic imaging , Rotator Cuff/pathology , Rotator Cuff Injuries/diagnostic imaging , Rotator Cuff Injuries/pathologyABSTRACT
Usage of implants containing antibiotic agents has been a common strategy to prevent implant related infections in orthopedic surgery. Unfortunately, most implants with microbial repellent properties are characterized by accessibility limitations during daily clinical practice. Aim of this in vitro study was to investigate whether suture tapes and cerclage wires, which were treated with vancomycin, show a sustainable antibacterial activity. For this purpose, we used 24 stainless steel wire cerclages and 24 ultra-high molecular weight polyethylene and polyester suture tape test bodies. The test bodies were incubated for 30 min. in 100 mg/ml vancomycin solution or equivalent volumes of 0.9% NaCl. After measuring the initial solution uptake of the test bodies, antibacterial efficacy via agar diffusion test with Staphylococcus aureus and vancomycin elution tests were performed 1, 2, 3, and 6 days after incubation. Vancomycin-loaded tapes as well as vancomycin-loaded cerclage wires demonstrated increased bacterial growth inhibition when compared to NaCl-treated controls. Vancomycin-loaded tapes showed an additional twofold and eightfold increase of bacterial growth inhibition compared to vancomycin-loaded wires at day 1 and 2, respectively. Elution tests at day 1 revealed high levels of vancomycin concentration in vancomycin loaded tapes and wires. Additionally, the concentration in vancomycin loaded tapes was 14-fold higher when compared to vancomycin loaded wires. Incubating suture tapes and cerclage wires in vancomycin solution showed a good short-term antibacterial activity compared to controls. Considering the ease of vancomycin application on suture tapes or wires, our method could represent an attractive therapeutic strategy in biofilm prevention in orthopedic surgery.
Subject(s)
Anti-Bacterial Agents/chemistry , Biocompatible Materials , Bone Wires , Sutures , Vancomycin/chemistry , Anti-Bacterial Agents/administration & dosage , Anti-Bacterial Agents/pharmacology , Drug Liberation , Materials Testing , Prostheses and Implants , Staphylococcus aureus/drug effects , Vancomycin/administration & dosage , Vancomycin/pharmacologyABSTRACT
OBJECTIVE: Treatment of tricompartimental osteoarthritis (OA) using customized instruments and implants for cruciate-retaining total knee arthroplasty. Use of patient-specific instruments and implants (ConforMIS iTotalTM CR G2) together with a 3D-planning protocol (iView®). Retropatellar resurfacing is optional. INDICATIONS: Symptomatic tricompartmental OA of the knee (Kellgren-Lawrence stage IV) with preserved posterior cruciate ligament (PCL) after unsuccessful conservative or joint-preserving surgical treatment. CONTRAINDICATIONS: Knee ligament instabilities of the posterior cruciate or collateral ligaments. Infection. Relative contraindication: knee deformities >15° (varus, valgus, flexion); prior partial knee replacement. SURGICAL TECHNIQUE: Midline or parapatellar medial skin incision, medial arthrotomy; distal femoral resection with patient-specific cutting block; tibial resection using either a cutting jig for the anatomic slope or a fixed 5° slope. Balancing the knee in extension and flexion gap using patient-specific spacer. The final tibial preparation achieved with gap-balanced placement of the femoral cutting jigs. Kinematic testing using anatomic trial components. Final implant components are cemented in extension. Wound layers are sutured. Drainage is optional. POSTOPERATIVE MANAGEMENT: Sterile wound dressing; compressive bandage. No limitation of the active and passive range of motion. Optional partial weight bearing during the first 2 weeks, then transition to full weight bearing. Follow-up directly after surgery, at 12 and 52 weeks, then every 1-2 years. RESULTS: Overall 60 patients with tricompartmental knee OA and preserved PCL were treated. Mean age was 66 (range 45-76) years. Minimum follow-up was 12 months. There was 1 septic revision after a low-grade infection, 1 reoperation to replace the patellar due to patellar osteoarthritis and 3 manipulations under anesthesia (MUAs) to increase range of motion. Radiographic analyses demonstrated an ideal implant fit with less than 2 mm subsidence or overhang. The WOMAC score improved from 154.8 points preoperatively to 83.5 points at 1 year and 59.3 points at 2 years postoperatively. The EuroQol-5D Score also improved from 11.1 points preoperatively to 7.7 points at 1 year postoperatively.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Osteoarthritis, Knee , Posterior Cruciate Ligament , Aged , Humans , Knee Joint/diagnostic imaging , Knee Joint/surgery , Middle Aged , Osteoarthritis, Knee/diagnostic imaging , Osteoarthritis, Knee/surgery , Posterior Cruciate Ligament/surgery , Range of Motion, Articular , Treatment OutcomeABSTRACT
Vitamin D deficiency is a global health concern that is estimated to afflict over one billion people globally. The major role of vitamin D is that of a regulator of calcium and phosphate metabolism, thus, being essential for proper bone mineralisation. Concomitantly, vitamin D is known to exert numerous extra-skeletal actions. For example, it has become evident that vitamin D has direct anti-proliferative, pro-differentiation and pro-apoptotic actions on cancer cells. Hence, vitamin D deficiency has been associated with increased cancer risk and worse prognosis in several malignancies. We have recently demonstrated that vitamin D deficiency promotes secondary cancer growth in bone. These findings were partly attributable to an increase in bone remodelling but also through direct effects of vitamin D on cancer cells. To date, very little is known about vitamin D status of patients with bone tumours in general. Thus, the objective of this study was to assess vitamin D status of patients with diverse bone tumours. Moreover, the aim was to elucidate whether or not there is an association between pre-diagnostic vitamin D status and tumour malignancy in patients with bone tumours. In a multi-center analysis, 25(OH)D, PTH and calcium levels of 225 patients that presented with various bone tumours between 2017 and 2018 were assessed. Collectively, 76% of all patients had insufficient vitamin D levels with a total mean 25(OH)D level of 21.43â¯ng/ml (53.58â¯nmol/L). In particular, 52% (117/225) of patients were identified as vitamin D deficient and further 24% of patients (55/225) were vitamin D insufficient. Notably, patients diagnosed with malignant bone tumours had significantly lower 25(OH)D levels than patients diagnosed with benign bone tumours [19.3 vs. 22.75â¯ng/ml (48.25 vs. 56.86â¯nmol/L); pâ¯=â¯0.04). In conclusion, we found a widespread and distressing rate of vitamin D deficiency and insufficiency in patients with bone tumours. However, especially for patients with bone tumours sufficient vitamin D levels seem to be of great importance. Thus, we believe that 25(OH)D status should routinely be monitored in these patients. Collectively, there should be an increased awareness for physicians to assess and if necessary correct vitamin D status of patients with bone tumours in general or of those at great risk of developing bone tumours.
ABSTRACT
The topical application of tranexamic acid (TXA) helps to prevent post-operative blood loss in total joint replacements. Despite these findings, the effects on articular and periarticular tissues remain unclear. Therefore, this in vitro study examined the effects of varying exposure times and concentrations of TXA on proliferation rates, gene expression and differentiation capacity of chondrocytes and human mesenchymal stromal cells (hMSCs), which underwent osteogenic differentiation. Chondrocytes and hMSCs were isolated and multiplied in monolayer cell cultures. Osteogenic differentiation of hMSCs was induced for 21 days using a differentiation medium containing specific growth factors. Cell proliferation was analyzed using ATP assays. Effects of TXA on cell morphology were examined via light microscopy and histological staining, while expression levels of tissue-specific genes were measured using semiquantitative RT-PCR. After treatment with 50 mg/mL of TXA, a decrease in cell proliferation rates was observed. Furthermore, treatment with concentrations of 20 mg/mL of TXA for at least 48 h led to a visible detachment of chondrocytes. TXA treatment with 50 mg/mL for at least 24 h led to a decrease in the expression of specific marker genes in chondrocytes and osteogenically differentiated hMSCs. No significant effects were observed for concentrations beyond 20 mg/mL of TXA combined with exposure times of less than 24 h. This might therefore represent a safe limit for topical application in vivo. Further research regarding in vivo conditions and effects on hMSC functionality are necessary to fully determine the effects of TXA on articular and periarticular tissues.
ABSTRACT
BACKGROUND: For improved outcomes in total knee arthroplasty (TKA) correct implant fitting and positioning are crucial. In order to facilitate a best possible implant fitting and positioning patient-specific systems have been developed. However, whether or not these systems allow for better implant fitting and positioning has yet to be elucidated. For this reason, the aim was to analyse the novel patient-specific cruciate retaining knee replacement system iTotal™ CR G2 that utilizes custom-made implants and instruments for its ability to facilitate accurate implant fitting and positioning including correction of the hip-knee-ankle angle (HKA). METHODS: We assessed radiographic results of 106 patients who were treated with the second generation of a patient-specific cruciate retaining knee arthroplasty using iTotal™ CR G2 (ConforMIS Inc.) for tricompartmental knee osteoarthritis (OA) using custom-made implants and instruments. The implant fit and positioning as well as the correction of the mechanical axis (hip-knee-ankle angle, HKA) and restoration of the joint line were determined using pre- and postoperative radiographic analyses. RESULTS: On average, HKA was corrected from 174.4° ± 4.6° preoperatively to 178.8° ± 2.2° postoperatively and the coronal femoro-tibial angle was adjusted on average 4.4°. The measured preoperative tibial slope was 5.3° ± 2.2° (mean +/- SD) and the average postoperative tibial slope was 4.7° ± 1.1° on lateral views. The joint line was well preserved with an average modified Insall-Salvati index of 1.66 ± 0.16 pre- and 1.67 ± 0.16 postoperatively. The overall accuracy of fit of implant components was decent with a measured medial overhang of more than 1 mm (1.33 mm ± 0.32 mm) in 4 cases only. Further, a lateral overhang of more than 1 mm (1.8 mm ± 0.63) (measured in the anterior-posterior radiographs) was observed in 11 cases, with none of the 106 patients showing femoral notching. CONCLUSION: The patient-specific iTotal™ CR G2 total knee replacement system facilitated a proper fitting and positioning of the implant components. Moreover, a good restoration of the leg axis towards neutral alignment was achieved as planned. Nonetheless, further clinical follow-up studies are necessary to validate our findings and to determine the long-term impact of using this patient- specific system.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Osteoarthritis, Knee , Arthroplasty, Replacement, Knee/adverse effects , Humans , Knee Joint/diagnostic imaging , Knee Joint/surgery , Leg , Osteoarthritis, Knee/diagnostic imaging , Osteoarthritis, Knee/surgery , Tibia/surgeryABSTRACT
In this study we developed and validated a 3D-printed drug delivery system (3DPDDS) to 1) improve local treatment efficacy of commonly applied chemotherapeutic agents in bone cancers to ultimately decrease their systemic side effects and 2) explore its concomitant diagnostic potential. Thus, we locally applied 3D-printed medical-grade polycaprolactone (mPCL) scaffolds loaded with Doxorubicin (DOX) and measured its effect in a humanized primary bone cancer model. A bioengineered species-sensitive orthotopic humanized bone niche was established at the femur of NOD-SCID IL2Rγnull (NSG) mice. After 6 weeks of in vivo maturation into a humanized ossicle, Luc-SAOS-2 cells were injected orthotopically to induce local growth of osteosarcoma (OS). After 16 weeks of OS development, a biopsy-like defect was created within the tumor tissue to locally implant the 3DPDDS with 3 different DOX loading doses into the defect zone. Histo- and morphological analysis demonstrated a typical invasive OS growth pattern inside a functionally intact humanized ossicle as well as metastatic spread to the murine lung parenchyma. Analysis of the 3DPDDS revealed the implants' ability to inhibit tumor infiltration and showed local tumor cell death adjacent to the scaffolds without any systemic side effects. Together these results indicate a therapeutic and diagnostic capacity of 3DPDDS in an orthotopic humanized OS tumor model.
Subject(s)
Bone Neoplasms , Osteosarcoma , Animals , Biocompatible Materials , Bone Neoplasms/drug therapy , Mice , Mice, Inbred NOD , Mice, SCID , Osteosarcoma/drug therapy , Printing, Three-DimensionalABSTRACT
OBJECTIVE: As native cartilage consists of different phenotypical zones, this study aims to fabricate different types of neocartilage constructs from collagen hydrogels and human mesenchymal stromal cells (MSCs) genetically modified to express different chondrogenic factors. DESIGN: Human MSCs derived from bone-marrow of osteoarthritis (OA) hips were genetically modified using adenoviral vectors encoding sex-determining region Y-type high-mobility-group-box (SOX) 9, transforming growth factor beta (TGFB) 1 or bone morphogenetic protein (BMP) 2 cDNA, placed in type I collagen hydrogels and maintained in serum-free chondrogenic media for three weeks. Control constructs contained unmodified MSCs or MSCs expressing GFP. The respective constructs were analyzed histologically, immunohistochemically, biochemically, and by qRT-PCR for chondrogenesis and hypertrophy. RESULTS: Chondrogenesis in MSCs was consistently and strongly induced in collagen I hydrogels by the transgenes SOX9, TGFB1 and BMP2 as evidenced by positive staining for proteoglycans, chondroitin-4-sulfate (CS4) and collagen (COL) type II, increased levels of glycosaminoglycan (GAG) synthesis, and expression of mRNAs associated with chondrogenesis. The control groups were entirely non-chondrogenic. The levels of hypertrophy, as judged by expression of alkaline phosphatase (ALP) and COL X on both the protein and mRNA levels revealed different stages of hypertrophy within the chondrogenic groups (BMP2>TGFB1>SOX9). CONCLUSIONS: Different types of neocartilage with varying levels of hypertrophy could be generated from human MSCs in collagen hydrogels by transfer of genes encoding the chondrogenic factors SOX9, TGFB1 and BMP2. This technology may be harnessed for regeneration of specific zones of native cartilage upon damage.
Subject(s)
Bone Morphogenetic Protein 2/genetics , Hydrogels/chemistry , SOX9 Transcription Factor/genetics , Transforming Growth Factor beta1/genetics , Alkaline Phosphatase/genetics , Alkaline Phosphatase/metabolism , Bone Morphogenetic Protein 2/metabolism , Cartilage/cytology , Cartilage/metabolism , Cartilage/pathology , Cell Differentiation , Cell Proliferation , Cells, Cultured , Chondrogenesis/genetics , Collagen Type I/chemistry , Collagen Type X/genetics , Culture Media, Serum-Free/chemistry , Glycosaminoglycans/metabolism , Humans , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/metabolism , Osteoarthritis/metabolism , Osteoarthritis/pathology , RNA, Messenger/metabolism , SOX9 Transcription Factor/metabolism , Transforming Growth Factor beta1/metabolismABSTRACT
BACKGROUND: While multiple in vitro studies examined mesenchymal stromal cells (MSCs) derived from bone marrow or hyaline cartilage, there is little to no data about the presence of MSCs in the joint capsule or the ligamentum capitis femoris (LCF) of the hip joint. Therefore, this in vitro study examined the presence and differentiation potential of MSCs isolated from the bone marrow, arthritic hyaline cartilage, the LCF and full-thickness samples of the anterior joint capsule of the hip joint. METHODS: MSCs were isolated and multiplied in adherent monolayer cell cultures. Osteogenesis and adipogenesis were induced in monolayer cell cultures for 21 days using a differentiation medium containing specific growth factors, while chondrogenesis in the presence of TGF-ß1 was performed using pellet-culture for 27 days. Control cultures were maintained for comparison over the same duration of time. The differentiation process was analyzed using histological and immunohistochemical stainings as well as semiquantitative RT-PCR for measuring the mean expression levels of tissue-specific genes. RESULTS: This in vitro research showed that the isolated cells from all four donor tissues grew plastic-adherent and showed similar adipogenic and osteogenic differentiation capacity as proven by the histological detection of lipid droplets or deposits of extracellular calcium and collagen type I. After 27 days of chondrogenesis proteoglycans accumulated in the differentiated MSC-pellets from all donor tissues. Immunohistochemical staining revealed vast amounts of collagen type II in all differentiated MSC-pellets, except for those from the LCF. Interestingly, all differentiated MSCs still showed a clear increase in mean expression of adipogenic, osteogenic and chondrogenic marker genes. In addition, the examination of an exemplary selected donor sample revealed that cells from all four donor tissues were clearly positive for the surface markers CD44, CD73, CD90 and CD105 by flow cytometric analysis. CONCLUSIONS: This study proved the presence of MSC-like cells in all four examined donor tissues of the hip joint. No significant differences were observed during osteogenic or adipogenic differentiation depending on the source of MSCs used. Further research is necessary to fully determine the tripotent differentiation potential of cells isolated from the LCF and capsule tissue of the hip joint.