Scalable high yield exfoliation for monolayer nanosheets.

Although two-dimensional (2D) materials have grown into an extended family that accommodates hundreds of members and have demonstrated promising advantages in many fields, their practical applications are still hindered by the lack of scalable high-yield production of monolayer products. Here, we show that scalable production of monolayer nanosheets can be achieved by a facile ball-milling exfoliation method with the assistance of viscous polyethyleneimine (PEI) liquid. As a demonstration, graphite is effectively exfoliated into graphene nanosheets, achieving a high monolayer percentage of 97.9% at a yield of 78.3%. The universality of this technique is also proven by successfully exfoliating other types of representative layered materials with different structures, such as carbon nitride, covalent organic framework, zeolitic imidazolate framework and hexagonal boron nitride. This scalable exfoliation technique for monolayer nanosheets could catalyze the synthesis and industrialization of 2D nanosheet materials.

Feeding spent coffee grounds into reactors: TFM simulation of a non-mechanical spouted bed type feeder.

Due to the increasing coffee production, Spent Coffee Grounds' (SCGs) generation has grown dramatically, hence appropriate management of this solid biomass waste is imperative. SCGs can be used as feedstocks for renewable energy and fuel generation provided that a stable feeding of powders to reactors is maintained. Recently, a non-mechanical spouted bed feeder proved itself an excellent alternative in feeding SCGs to a pilot-scale circulating fluidized bed reactor. Nonetheless, further studies are necessary for the feeder's implementation in commercial applications. Here the feeding of SCGs with the spouted bed feeder is addressed by using Computational Fluid Dynamics. Firstly, a Two-Fluid Model (TFM) is validated against experimental data, and then the effects of five operating and design parameters were analyzed aiming at improving the handling of SCGs. The solids flowrate (WS) in the reactor could be stably controlled from 4 to 30 g/s depending on the settings. The feeder performance is enhanced by operating it under high gas flowrate (Q), high entrainment length (z), and high mass of solids in the feeder (HS). Using feeders with low cone angle (γ) or reactors with large diameter (DR) increases WS, which is appealing for the operation of medium-to large-scale units. The proposed TFM is a cost-effective tool for implementing spouted bed feeders in commercial applications. With the feeder coupled to the process, SCGs are treated continuously in the reactor for energy generation, thus reducing the disposal problems associated with this waste and improving the management of SCGs globally.