Compositional space: A guide for environmental chemists on the identification of persistent and bioaccumulative organics using mass spectrometry.

Since 2001, twenty-eight halogenated groups of persistent organic pollutants (POPs) have been banned or restricted by the Stockholm Convention. Identifying new POPs among the hundreds of thousands of anthropogenic chemicals is a major challenge that is increasingly being met by state-of-the-art mass spectrometry (MS). The first step to identification of a contaminant molecule (M) is the determination of the type and number of its constituent elements, viz. its elemental composition, from mass-to-charge (m/z) measurements and ratios of isotopic peaks (M + 1, M + 2 etc.). Not every combination of elements is possible. Boundaries exist in compositional space that divides feasible and improbable compositions as well as different chemical classes. This study explores the compositional space boundaries of persistent and bioaccumulative organics. A set of ~305,134 compounds (PubChem) was used to visualize the compositional space occupied by F, Cl, and Br compounds, as defined by m/z and isotope ratios. Persistent bioaccumulative organics, identified by in silico screening of 22,049 commercial chemicals, reside in more constrained regions characterized by a higher degree of halogenation. In contrast, boundaries surrounding non-halogenated chemicals could not be defined. Finally, a script tool (R code) was developed to select potential POPs from high resolution MS data. When applied to household dust (SRM 2585), this approach resulted in the discovery of previously unknown chlorofluoro flame retardants.

Identifying new persistent and bioaccumulative organics among chemicals in commerce. III: byproducts, impurities, and transformation products.

The goal of this series of studies was to identify commercial chemicals that might be persistent and bioaccumulative (PB) and that were not being considered in current wastewater and aquatic environmental measurement programs. In this study, we focus on chemicals that are not on commercial chemical lists such as U.S. EPA's Inventory Update Rule but may be found as byproducts or impurities in commercial chemicals or are likely transformation products from commercial chemical use. We evaluated the 610 chemicals from our earlier publication as well as high production volume chemicals and identified 320 chemicals (39 byproducts and impurities, and 281 transformation products) that could be potential PB chemicals. Four examples are discussed in detail; these chemicals had a fair amount of information on the commercial synthesis and byproducts and impurities that might be found in the commercial product. Unfortunately for many of the 610 chemicals, as well as the transformation products, little or no information was available. Use of computer-aided software to predict the transformation pathways in combination with the biodegradation rules of thumb and some basic organic chemistry has allowed 281 potential PB transformation products to be suggested for some of the 610 commercial chemicals; more PB transformation products were not selected since microbial degradation often results in less persistent and less bioaccumulative metabolites.

Environmental release, environmental concentrations, and ecological risk of N,N-Diethyl-m-toluamide (DEET).

N,N-Diethyl-m-toluamide's (DEET) commercial use as an insect repellent and other reported uses are reviewed. Evidence that DEET is reaching the environment mainly from consumer use of DEET-containing insect repellent includes studies reporting higher concentrations of DEET in surface water and wastewater samples during the summer months, the presence of DEET in on-site septic tank effluent at concentrations similar to that reported in wastewater treatment plant (WWTP) influent, and changes in WWTP effluent concentrations before and after the introduction of a DEET replacement in Germany. Its detected concentrations in influent and effluent of WWTP and surface water worldwide are reviewed and correlations between DEET usage and wastewater effluent concentrations are analyzed. The removability during wastewater treatment is also evaluated. A correlation between commercial DEET use in a metropolitan area and concentrations in WWTP effluents was assessed, and 2 different models were used to predict DEET concentrations in rivers and streams throughout the United States. Ecological toxicity data are reviewed for acute studies and for chronic values that are available for Daphnia magna and algae. The ecological risk of DEET usage is evaluated by examining the relationship of the expected dose/response to observed concentrations.

Identifying new persistent and bioaccumulative organics among chemicals in commerce II: pharmaceuticals.

The goal of this study was to identify commercial pharmaceuticals that might be persistent and bioaccumulative (P&B) and that were not being considered in current wastewater and aquatic environmental measurement programs. We developed a database of 3193 pharmaceuticals from two U.S. Food and Drug Administration (FDA) databases and some lists of top ranked or selling drugs. Of the 3193 pharmaceuticals, 275 pharmaceuticals have been found in the environment and 399 pharmaceuticals were, based upon production volumes, designated as high production volume (HPV) pharmaceuticals. All pharmaceuticals that had reported chemical structures were evaluated for potential bioaccumulation (B) or persistence (P) using quantitative structure property relationships (QSPR) or scientific judgment. Of the 275 drugs detected in the environment, 92 were rated as potentially bioaccumulative, 121 were rated as potentially persistent, and 99 were HPV pharmaceuticals. After removing the 275 pharmaceuticals previously detected in the environment, 58 HPV compounds were identified that were both P&B and 48 were identified as P only. Of the non-HPV compounds, 364 pharmaceuticals were identified that were P&B. This study has yielded some interesting and probable P&B pharmaceuticals that should be considered for further study.

Proximity of food retailers to schools and rates of overweight ninth grade students: an ecological study in California.

BACKGROUND: The prevalence of obesity and overweight in youth has increased dramatically since the 1980s, and some researchers hypothesize that increased consumption of low-nutrient, energy-dense foods is a key contributor. The potential importance of food retailers near schools has received increasing attention, but public health research and policy has focused primarily on fast food restaurants. Less is known about the relationship between overweight/obesity and other types of retailers. This study aims to investigate the potential associations between nearby 1) fast food restaurants, 2) convenience stores, and 3) supermarkets, and rates of overweight students in California schools. METHODS: We examined the rate of overweight ninth grade students in public schools in 2007 using linear regression. The percentage of overweight students per school was determined by a state required physical fitness test, with three different options for measuring individual body composition. Our key independent variables were the presence of three different types of retailers within 800 m network buffers of the schools. Additional independent variables included school ethnic, gender and socioeconomic composition, as well as urban/non-urban location. We obtained the data from the California Department of Education and ESRI, Inc. RESULTS: The presence of a convenience store within a 10-minute walking distance of a school was associated with a higher rate of overweight students than schools without nearby convenience stores, after controlling for all school-level variables in the regression (1.2%, 95% confidence interval 0.03, 2.36). Nearby fast food restaurants and supermarkets, however, were not associated with school rates of overweight students. CONCLUSIONS: Public health researchers and policy-makers interested in the food environments outside schools should expand their recent focus on nearby fast food restaurants to include convenience stores, which may also be important sources of low-nutrient, energy-dense foods for students.

Toward identifying the next generation of superfund and hazardous waste site contaminants.

BACKGROUND: This commentary evolved from a workshop sponsored by the National Institute of Environmental Health Sciences titled "Superfund Contaminants: The Next Generation" held in Tucson, Arizona, in August 2009. All the authors were workshop participants. OBJECTIVES: Our aim was to initiate a dynamic, adaptable process for identifying contaminants of emerging concern (CECs) that are likely to be found in future hazardous waste sites, and to identify the gaps in primary research that cause uncertainty in determining future hazardous waste site contaminants. DISCUSSION: Superfund-relevant CECs can be characterized by specific attributes: They are persistent, bioaccumulative, toxic, occur in large quantities, and have localized accumulation with a likelihood of exposure. Although still under development and incompletely applied, methods to quantify these attributes can assist in winnowing down the list of candidates from the universe of potential CECs. Unfortunately, significant research gaps exist in detection and quantification, environmental fate and transport, health and risk assessment, and site exploration and remediation for CECs. Addressing these gaps is prerequisite to a preventive approach to generating and managing hazardous waste sites. CONCLUSIONS: A need exists for a carefully considered and orchestrated expansion of programmatic and research efforts to identify, evaluate, and manage CECs of hazardous waste site relevance, including developing an evolving list of priority CECs, intensifying the identification and monitoring of likely sites of present or future accumulation of CECs, and implementing efforts that focus on a holistic approach to prevention.

Identifying new persistent and bioaccumulative organics among chemicals in commerce.

The goal of this study was to identify commercial chemicals that might be persistent and bioaccumulative (P&B) and that were not being considered in current Great Lakes, North American, and Arctic contaminant measurement programs. We combined the Canadian Domestic Substance List (DSL), a list of 3059 substances of "unknown or variable composition complex reaction products and biological materials" (UVCBs), and the U.S. Environmental Protection Agency (U.S. EPA) Toxic Substances Control Act (TSCA) Inventory Update Rule (IUR) database for years 1986, 1990, 1994, 1998, 2002, and 2006 yielding a database of 22263 commercial chemicals. From that list, 610 chemicals were identified by estimates from U.S EPA EPISuite software and using expert judgment. This study has yielded some interesting and probable P&B chemicals that should be considered for further study. Recent studies, following up our initial reports and presentations on this work, have confirmed the presence of many of these chemicals in the environment.

A comparative human health risk assessment of p-dichlorobenzene-based toilet rimblock products versus fragrance/surfactant-based alternatives.

A comparison of the human health risk to consumers using one of two types of toilet rimblock products, either a p-dichlorobenzene-based rimblock or two newer fragrance/surfactant-based alternatives, was conducted. Rimblock products are designed for global use by consumers worldwide and function by releasing volatile compounds into indoor air with subsequent exposure presumed to be mainly by inhalation of indoor air. Using the THERdbASE exposure model and experimentally determined emission data, indoor air concentrations and daily intake values were determined for both types of rimblock products. Modeled exposure concentrations from a representative p-dichlorobenzene rimblock product are an order of magnitude higher than those from the alternative rimblock products due to its nearly pure composition and high sublimation rate. Lifetime exposure to p-dichlorobenzene or the subset of fragrance components with available RfD values is not expected to lead to non-cancer-based adverse health effects based on the exposure concentrations estimated using the THERdbASE model. A similar comparison of cancer-based effects was not possible as insufficient data were available for the fragrance components.

Workgroup report: review of fish bioaccumulation databases used to identify persistent, bioaccumulative, toxic substances.

Chemical management programs strive to protect human health and the environment by accurately identifying persistent, bioaccumulative, toxic substances and restricting their use in commerce. The advance of these programs is challenged by the reality that few empirical data are available for the tens of thousands of commercial substances that require evaluation. Therefore, most preliminary assessments rely on model predictions and data extrapolation. In November 2005, a workshop was held for experts from governments, industry, and academia to examine the availability and quality of in vivo fish bioconcentration and bioaccumulation data, and to propose steps to improve its prediction. The workshop focused on fish data because regulatory assessments predominantly focus on the bioconcentration of substances from water into fish, as measured using in vivo tests or predicted using computer models. In this article we review of the quantity, features, and public availability of bioconcentration, bioaccumulation, and biota-sediment accumulation data. The workshop revealed that there is significant overlap in the data contained within the various fish bioaccumulation data sources reviewed, and further, that no database contained all of the available fish bioaccumulation data. We believe that a majority of the available bioaccumulation data have been used in the development and testing of quantitative structure-activity relationships and computer models currently in use. Workshop recommendations included the publication of guidance on bioconcentration study quality, the combination of data from various sources to permit better access for modelers and assessors, and the review of chemical domains of existing models to identify areas for expansion.

Are there other persistent organic pollutants? A challenge for environmental chemists.

The past 5 years have seen some major successes in terms of global measurement and regulation of persistent, bioaccumulative, and toxic (PB&T) chemicals and persistent organic pollutants (POPs). The Stockholm Convention, a global agreement on POPs, came into force in 2004. There has been a major expansion of measurements and risk assessments of new chemical contaminants in the global environment, particularly brominated diphenyl ethers and perfluorinated alkyl acids. However, the list of chemicals measured represents only a small fraction of the approximately 30,000 chemicals widely used in commerce (>1 t/y). The vast majority of existing and new chemical substances in commerce are not monitored in environmental media. Assessment and screening of thousands of existing chemicals in commerce in the United States, Europe, and Canada have yielded lists of potentially persistent and bioaccumulative chemicals. Here we review recent screening and categorization studies of chemicals in commerce and address the question of whether there is now sufficient information to permit a broader array of chemicals to be determined in environmental matrices. For example, Environment Canada's recent categorization of the Domestic (existing) Substances list, using a wide array of quantitative structure activity relationships for PB&T characteristics, has identified about 5.5% of 11,317 substances as meeting P & B criteria. Using data from the Environment Canada categorization, we have listed, for discussion purposes, 30 chemicals with high predicted bioconcentration and low rate of biodegradation and 28 with long range atmospheric transport potential based on predicted atmospheric oxidation half-lives >2 days and log air-water partition coefficients > or =5 and < or =1. These chemicals are a diverse group including halogenated organics, cyclic siloxanes, and substituted aromatics. Some of these chemicals and their transformation products may be candidates for future environmental monitoring. However, to improve these predictions data on emissions from end use are needed to refine environmental fate predictions, and analytical methods may need to be developed.

Estimating octanol-air partition coefficients with octanol-water partition coefficients and Henry's law constants.

The octanol-air partition coefficient (K(OA)) is useful for predicting the partitioning behavior of organic compounds between air and environmental matrices such as soil, vegetation, and aerosol particles. At present, experimentally determined K(OA) values are available for only several hundred compounds. Therefore, the ability to estimate K(OA) is necessary for screening level evaluation of most chemicals. Although it is possible to estimate K(OA) from the octanol-water partition coefficient (K(OW)) and Henry's law constant (HLC), various concerns have been raised in regard to the usability of this estimation methodology. This work examines the accuracy and usability of K(OW) and HLC in application to a comprehensive database set of K(OA) values for screening level environmental assessment. Results indicate that K(OW) and HLC can be used to accurately predict K(OA) even when estimated K(OW) and HLC values are used. For an experimental dataset of 310log K(OA) values for different compounds, the K(OW)-HLC method was statistically accurate as follows: correlation coefficient (r2): 0.972, standard deviation: 0.526, absolute mean error: 0.358 using predominantly experimental K(OW) and HLC values. When K(OW) and HLC values were estimated (using the KOWWIN and HENRYWIN programs), the statistical accuracy was: correlation coefficient (r2): 0.957, standard deviation: 0.668, absolute mean error: 0.479.

Finding and estimating chemical property data for environmental assessment.

The ability to predict the behavior of a chemical substance in a biological or environmental system largely depends on knowledge of the physicochemical properties and reactivity of that substance. We focus here on properties, with the objective of providing practical guidance for finding measured values and using estimation methods when necessary. Because currently available computer software often makes it more convenient to estimate than to retrieve measured values, we try to discourage irrational exuberance for these tools by including comprehensive lists of Internet and hard-copy data resources. Guidance for assessors is presented in the form of a process to obtain data that includes establishment of chemical identity, identification of data sources, assessment of accuracy and reliability, substructure searching for analogs when experimental data are unavailable, and estimation from chemical structure. Regarding property estimation, we cover estimation from close structural analogs in addition to broadly applicable methods requiring only the chemical structure. For the latter, we list and briefly discuss the most widely used methods. Concluding thoughts are offered concerning appropriate directions for future work on estimation methods, again with an emphasis on practical applications.

Recent developments in broadly applicable structure-biodegradability relationships.

Biodegradation is one of the most important processes influencing concentration of a chemical substance after its release to the environment. It is the main process for removal of many chemicals from the environment and therefore is an important factor in risk assessments. This article reviews available methods and models for predicting biodegradability of organic chemicals from structure. The first section of the article briefly discusses current needs for biodegradability estimation methods related to new and existing chemicals and in the context of multimedia exposure models. Following sections include biodegradation test methods and endpoints used in modeling, with special attention given to the Japanese Ministry of International Trade and Industry test; a primer on modeling, describing the various approaches that have been used in the structure/biodegradability relationship work, and contrasting statistical and mechanistic approaches; and recent developments in structure/biodegradability relationships, divided into group contribution, chemometric, and artificial intelligence approaches.

A review of quantitative structure-activity relationship methods for the prediction of atmospheric oxidation of organic chemicals.

Organic compounds are chemically transformed in the troposphere by reaction with photochemically generated oxidants that include hydroxyl radicals, nitrate radicals, and ozone. The reaction rates are a measure of atmospheric persistence and are necessary for developing environmental exposure assessments. Since relatively few experimentally measured rate constants are available, environmental risk/exposure assessors must estimate degradation rates. Rates can be predicted through use of quantitative structure-activity relationships (QSARs). QSAR methods are described for estimating reaction rates with hydroxyl radicals, nitrate radicals, and ozone. QSAR accuracy and limitations are also discussed.