Selective activation of MoS2 grain boundaries for enhanced electrochemical activity.

Molybdenum disulfide (MoS2) has emerged as a promising material for catalysis and sustainable energy conversion. However, the inertness of its basal plane to electrochemical reactions poses challenges to the utilization of wafer-scale MoS2 in electrocatalysis. To overcome this limitation, we present a technique that enhances the catalytic activity of continuous MoS2 by preferentially activating its buried grain boundaries (GBs). Through mild UV irradiation, a significant enhancement in GB activity was observed that approaches the values for MoS2 edges, as confirmed by a site-selective photo-deposition technique and micro-electrochemical hydrogen evolution reaction (HER) measurements. Combined spectroscopic characterization and ab-initio simulation demonstrates substitutional oxygen functionalization at the grain boundaries to be the origin of this selective catalytic enhancement by an order of magnitude. Our approach not only improves the density of active sites in MoS2 catalytic processes but yields a new photocatalytic conversion process. By exploiting the difference in electronic structure between activated GBs and the basal plane, homo-compositional junctions were realized that improve the photocatalytic synthesis of hydrogen by 47% and achieve performances beyond the capabilities of other catalytic sites.

Confined VLS Growth of Single-Layer 2D Tungsten Nitrides.

Two-dimensional (2D) metal nitrides have garnered significant interest due to their potential applications in future electronics and quantum systems. However, the synthesis of such materials with sufficient uniformity and at relevant scales remains an unaddressed challenge. This study demonstrates the potential of confined growth to control and enhance the morphology of 2D metal nitrides. By restricting the reaction volume of vapor-liquid-solid reactions, an enhanced precursor concentration was achieved that reduces the nucleation density, resulting in larger grain sizes and suppression of multilayer growth. Detailed characterization reveals the importance of balancing the energetic and kinetic aspects of tungsten nitride formation toward this ability. The introduction of a promoter enabled the realization of large-scale, single-layer tungsten nitride with a uniform and high interfacial quality. Finally, our advance in morphology control was applied to the production of edge-enriched 2D tungsten nitrides with significantly enhanced hydrogen evolution ability, as indicated by an unprecedented Tafel slope of 55 mV/dec.

Tungsten Nitride (W5N6): An Ultraresilient 2D Semimetal.

Two-dimensional transition metal nitrides offer intriguing possibilities for achieving novel electronic and mechanical functionality owing to their distinctive and tunable bonding characteristics compared to other 2D materials. We demonstrate here the enabling effects of strong bonding on the morphology and functionality of 2D tungsten nitrides. The employed bottom-up synthesis experienced a unique substrate stabilization effect beyond van-der-Waals epitaxy that favored W5N6 over lower metal nitrides. Comprehensive structural and electronic characterization reveals that monolayer W5N6 can be synthesized at large scale and shows semimetallic behavior with an intriguing indirect band structure. Moreover, the material exhibits exceptional resilience against mechanical damage and chemical reactions. Leveraging these electronic properties and robustness, we demonstrate the application of W5N6 as atomic-scale dry etch stops that allow the integration of high-performance 2D materials contacts. These findings highlight the potential of 2D transition metal nitrides for realizing advanced electronic devices and functional interfaces.

Self-Expansion Based Multi-Patterning for 2D Materials Fabrication beyond the Lithographical Limit.

Two-dimensional (2D) materials are promising successors for silicon transistor channels in ultimately scaled devices, necessitating significant research efforts to study their behavior at nanoscopic length scales. Unfortunately, current research has limited itself to direct patterning approaches, which limit the achievable resolution to the diffraction limit and introduce unwanted defects into the 2D material. The potential of multi-patterning to fabricate 2D materials features with unprecedented precision and low complexity at large scale is demonstrated here. By combining lithographic patterning of a mandrel and bottom-up self-expansion, this approach enables pattern resolution one order of magnitude below the lithographical resolution. In-depth characterization of the self-expansion double patterning (SEDP) process reveals the ability to manipulate the critical dimension with nanometer precision through a self-limiting and temperature-controlled oxidation process. These results indicate that the SEDP process can regain the quality and morphology of the 2D material, as shown by high-resolution microscopy and optical spectroscopy. This approach is shown to open up new avenues for research into high-performance, ultra-scaled 2D materials devices for future electronics.

Ultrahigh-quality graphene resonators by liquid-based strain-engineering.

Two-dimensional (2D) material-based nanoelectromechanical (NEM) resonators are expected to be enabling components in hybrid qubits that couple mechanical and electromagnetic degrees of freedom. However, challenges in their sensitivity and coherence time have to be overcome to realize such mechanohybrid quantum systems. We here demonstrate the potential of strain engineering to realize 2D material-based resonators with unprecedented performance. A liquid-based tension process was shown to enhance the resonance frequency and quality factor of graphene resonators six-fold. Spectroscopic and microscopic characterization reveals a surface-energy enhanced wall interaction as the origin of this effect. The response of our tensioned resonators is not limited by external loss factors and exhibits near-ideal internal losses, yielding superior resonance frequencies and quality factors to all previously reported 2D material devices. Our approach represents a powerful method of enhancing 2D NEM resonators for future quantum systems.

Vacancy-plane-mediated exfoliation of sub-monolayer 2D pyrrhotite.

Conventional exfoliation exploits the anisotropy in bonding or compositional character to delaminate 2D materials with large lateral size and atomic thickness. This approach, however, limits the choice to layered host crystals with a specific composition. Here, we demonstrate the exfoliation of a crystal along planes of ordered vacancies as a novel route toward previously unattainable 2D crystal structures. Pyrrhotite, a non-stoichiometric iron sulfide, was utilized as a prototype system due to its complex vacancy superstructure. Bulk pyrrhotite crystals were synthesized by gas-assisted bulk conversion, and their diffraction pattern revealed a 4C superstructure with 3 vacancy interfaces within the unit cell. Electrochemical intercalation and subsequent delamination yield ultrathin 2D flakes with a large lateral extent. Atomic force microscopy confirms that exfoliation occurs at all three supercell interfaces, resulting in the isolation of 2D structures with sub-unit cell thicknesses of 1/2 and 1/4 monolayers. The impact of controlling the morphology of 2D materials below the monolayer limit on 2D magnetic properties was investigated. Bulk pyrrhotite was shown to exhibit ferrimagnetic ordering that agrees with theoretical predictions and that is retained after exfoliation. A complex magnetic domain structure and an enhanced impact of vacancy planes on magnetization emphasize the potential of our synthesis approach as a powerful platform for modulating magnetic properties in future electronics and spintronics.

Nitrogen Pretreatment of Growth Substrates for Vacancy-Saturated MoS2.

Two-dimensional transition-metal dichalcogenides (2D TMDCs) are considered promising materials for optoelectronics due to their unique optical and electric properties. However, their potential has been limited by the occurrence of atomic vacancies during synthesis. While post-treatment processes have demonstrated the passivation of such vacancies, they increase process complexity and affect the TMDC's quality. We here introduce the concept of pretreatment as a facile and powerful route to solve the problem of vacancies in MoS2. Low-temperature nitridation of the sapphire substrate prior to growth provides a nondestructive method to MoS2 modification without introducing new processing steps or increasing the thermal budget. Spectroscopic characterization and atomic-resolution microscopy reveal the incorporation of nitrogen from the sapphire surface layer into chalcogen vacancies. The resulting MoS2 with nitrogen-saturated defects shows a decrease in midgap states and more intrinsic doping as confirmed by ab initio calculations and optoelectronic measurements. The demonstrated pretreatment method opens up new routes toward future, high-performance 2D electronics, as evidenced by a 3-fold reduction in contact resistance and a 10-fold improved performance of 2D photodetectors.

Enhancing optical characteristics of mediator-assisted wafer-scale MoS2and WS2on h-BN.

Two-dimensional (2D) materials and their heterostructures exhibit intriguing optoelectronic properties; thus, they are good platforms for exploring fundamental research and further facilitating real device applications. The key is to preserve the high quality and intrinsic properties of 2D materials and their heterojunction interface even in production scale during the transfer and assembly process so as to apply in semiconductor manufacturing field. In this study, we successfully adopted a wet transfer existing method to separate mediator-assisted wafer-scale from SiO2/Si growing wafer for the first time with intermediate annealing to fabricate wafer-scale MoS2/h-BN and WS2/h-BN heterostructures on a SiO2/Si wafer. Interestingly, the high-quality wafer-scale 2D material heterostructure optical properties were enhanced and confirmed by Raman and photoluminescence spectroscopy. Our approach can be applied to other 2D materials and expedite mass production for industrial applications.

Exciton Manipulation for Enhancing Photoelectrochemical Hydrogen Evolution Reaction in Wrinkled 2D Heterostructures.

2D materials' junctions have demonstrated capabilities as metal-free alternatives for the hydrogen evolution reaction (HER). To date, the HER has been limited to heterojunctions of different compositions or band structures. Here, the potential of local strain modulation based on wrinkled 2D heterostructures is demonstrated, which helps to realize photoelectrocatalytically active junctions. By forming regions of high and low tensile strain in wrinkled WS2 monolayers, local modification of their band structure and internal electric field due to piezoelectricity is realized in the lateral direction. This structure produces efficient electron-hole pair generation due to light trapping and exciton funneling toward the crest of the WS2 wrinkles and enhances exciton separation. Additionally, the formation of wrinkles induces an air gap in-between the 2D layer and substrate, which reduces the interfacial scattering effect and consequently improves the charge-carrier mobility. A detailed study of the strain-dependence of the photocatalytic HER process demonstrates a 2-fold decrease in the Tafel slope and a 30-fold enhancement in exchange current density. Finally, optimization of the light absorption through functionalization with quantum dots produces unprecedented photoelectrocatalytic performance and provides a route toward the scalable formation of strain-modulated WS2 nanojunctions for future green energy generation.

2D Material-Enabled Optical Rectennas with Ultrastrong Light-Electron Coupling.

Optical rectennas extend the electromagnetic wave rectification process into the visible regime and provide a route toward high-performance photodetection and energy harvesting. Here, the promise of 2D materials toward on-chip optical rectennas is demonstrated. A self-aligned patterning process yields lateral MIM structures where a nanometer-sized air gap separates a 2D material contact from a metal electrode. This device can be scalably produced in large arrays using established microfabrication techniques. Different from previous approaches, the performance of the 2D rectenna can be adjusted through electrostatic gating. Optimization of the band alignment leads to strong rectification at wavelengths around 500 nm and clear polarization control. Comparison of wavelength-dependent rectenna performance with a photon-assisted tunneling model reveals a tenfold increase in photon-electron coupling over nanotube-based rectennas. The results highlight the potential of 2D material-based rectennas for future quantum computing applications.

Enhancing the Photoelectrochemical Hydrogen Evolution Reaction through Nanoscrolling of Two-Dimensional Material Heterojunctions.

The clean production of hydrogen from water using sunlight has emerged as a sustainable alternative toward large-scale energy generation and storage. However, designing photoactive semiconductors that are suitable for both light harvesting and water splitting is a pivotal challenge. Atomically thin transition metal dichalcogenides (TMD) are considered as promising photocatalysts because of their wide range of available electronic properties and compositional variability. However, trade-offs between carrier transport efficiency, light absorption, and electrochemical reactivity have limited their prospects. We here combine two approaches that synergistically enhance the efficiency of photocarrier generation and electrocatalytic efficiency of two-dimensional (2D) TMDs. The arrangement of monolayer WS2 and MoS2 into a heterojunction and subsequent nanostructuring into a nanoscroll (NS) yields significant modifications of fundamental properties from its constituents. Spectroscopic characterization and ab initio simulation demonstrate the beneficial effects of straining and wall interactions on the band structure of such a heterojunction-NS that enhance the electrochemical reaction rate by an order of magnitude compared to planar heterojunctions. Phototrapping in this NS further increases the light-matter interaction and yields superior photocatalytic performance compared to previously reported 2D material catalysts and is comparable to noble-metal catalyst systems in the photoelectrochemical hydrogen evolution reaction (PEC-HER) process. Our approach highlights the potential of morphologically varied TMD-based catalysts for PEC-HER.

Chemical vapor deposition merges MoS2 grains into high-quality and centimeter-scale films on Si/SiO2.

Two-dimensional molybdenum disulfide (MoS2) has attracted increasing attention due to its promise for next-generation electronics. To realize MoS2-based electronics, however, a synthesis method is required that produces a uniform single-layer material and that is compatible with existing semiconductor fabrication techniques. Here, we demonstrate that uniform films of single-layer MoS2 can be directly produced on Si/SiO2 at wafer-scale without the use of catalysts or promoters. Control of the precursor transport through oxygen dosing yielded complete coverage and increased connectivity between crystalline MoS2 domains. Spectroscopic characterization and carrier transport measurements furthermore revealed a reduced density of defects compared to conventional chemical vapor deposition growth that increased the quantum yield over ten-fold. To demonstrate the impact of enhanced scale and optoelectronic performance, centimeter-scale arrays of MoS2 photosensors were produced that demonstrate unprecedentedly high and uniform responsivity. Our approach improves the prospect of MoS2 for future applications.

Ferroelectric 2D ice under graphene confinement.

We here report on the direct observation of ferroelectric properties of water ice in its 2D phase. Upon nanoelectromechanical confinement between two graphene layers, water forms a 2D ice phase at room temperature that exhibits a strong and permanent dipole which depends on the previously applied field, representing clear evidence for ferroelectric ordering. Characterization of this permanent polarization with respect to varying water partial pressure and temperature reveals the importance of forming a monolayer of 2D ice for ferroelectric ordering which agrees with ab-initio and molecular dynamics simulations conducted. The observed robust ferroelectric properties of 2D ice enable novel nanoelectromechanical devices that exhibit memristive properties. A unique bipolar mechanical switching behavior is observed where previous charging history controls the transition voltage between low-resistance and high-resistance state. This advance enables the realization of rugged, non-volatile, mechanical memory exhibiting switching ratios of 106, 4 bit storage capabilities and no degradation after 10,000 switching cycles.

Two-Dimensional Mechano-thermoelectric Heterojunctions for Self-Powered Strain Sensors.

We here demonstrate the multifunctional properties of atomically thin heterojunctions that are enabled by their strong interfacial interactions and their application toward self-powered sensors with unprecedented performance. Bonding between tin diselenide and graphene produces thermoelectric and mechanoelectric properties beyond the ability of either component. A record-breaking ZT of 2.43 originated from the synergistic combination of graphene's high carrier conductivity and SnSe2-mediated thermal conductivity lowering. Moreover, spatially varying interaction at the SnSe2/graphene interface produces stress localization that results in a novel 2D-crack-assisted strain sensing mechanism whose sensitivity (GF = 450) is superior to all other 2D materials. Finally, a graphene-assisted growth process permits the formation of high-quality heterojunctions directly on polymeric substrates for flexible and transparent sensors that achieve self-powered strain sensing from a small temperature gradient. Our work enhances the fundamental understanding of multifunctionality at the atomic scale and provides a route toward structural health monitoring through ubiquitous and smart devices.

Edge-Trimmed Nanogaps in 2D Materials for Robust, Scalable, and Tunable Lateral Tunnel Junctions.

Lateral tunnel junctions are fundamental building blocks for molecular electronics and novel sensors, but current fabrication approaches achieve device yields below 10%, which limits their appeal for circuit integration and large-scale application. We here demonstrate a new approach to reliably form nanometer-sized gaps between electrodes with high precision and unprecedented control. This advance in nanogap production is enabled by the unique properties of 2D materials-based contacts. The large difference in reactivity of 2D materials' edges compared to their basal plane results in a sequential removal of atoms from the contact perimeter. The resulting trimming of exposed graphene edges in a remote hydrogen plasma proceeds at speeds of less than 1 nm per minute, permitting accurate control of the nanogap dimension through the etching process. Carrier transport measurements reveal the high quality of the nanogap, thus-produced tunnel junctions with a 97% yield rate, which represents a tenfold increase in productivity compared to previous reports. Moreover, 70% of tunnel junctions fall within a nanogap range of only 0.5 nm, representing an unprecedented uniformity in dimension. The presented edge-trimming approach enables the conformal narrowing of gaps and produces novel one-dimensional nano-trench geometries that can sustain larger tunneling currents than conventional 0D nano-junctions. Finally, the potential of our approach for future electronics was demonstrated by the realization of an atom-based memory.

Additive-Enhanced Exfoliation for High-Yield 2D Materials Production.

The success of van-der-Waals electronics, which combine large-scale-deposition capabilities with high device performance, relies on the efficient production of suitable 2D materials. Shear exfoliation of 2D materials' flakes from bulk sources can generate 2D materials with low amounts of defects, but the production yield has been limited below industry requirements. Here, we introduce additive-assisted exfoliation (AAE) as an approach to significantly increase the efficiency of shear exfoliation and produce an exfoliation yield of 30%. By introducing micrometer-sized particles that do not exfoliate, the gap between rotor and stator was dynamically reduced to increase the achievable shear rate. This enhancement was applied to WS2 and MoS2 production, which represent two of the most promising 2D transition-metal dichalcogenides. Spectroscopic characterization and cascade centrifugation reveal a consistent and significant increase in 2D material concentrations across all thickness ranges. Thus, the produced WS2 films exhibit high thickness uniformity in the nanometer-scale and can open up new routes for 2D materials production towards future applications.

Edge-Rich Interconnected Graphene Mesh Electrode with High Electrochemical Reactivity Applicable for Glucose Detection.

The development of graphene structures with controlled edges is greatly desired for understanding heterogeneous electrochemical (EC) transfer and boosting EC applications of graphene-based electrodes. We herein report a facile, scalable, and robust method to produce graphene mesh (GM) electrodes with tailorable edge lengths. Specifically, the GMs were fabricated at 850 °C under a vacuum level of 0.6 Pa using catalytic nickel templates obtained based on a crack lithography. As the edge lengths of the GM electrodes increased from 5.48 to 24.04 m, their electron transfer rates linearly increased from 0.08 to 0.16 cm∙s-1, which are considerably greater than that (0.056 ± 0.007 cm∙s-1) of basal graphene structures (defined as zero edge length electrodes). To illustrate the EC sensing potentiality of the GM, a high-sensitivity glucose detection was conducted on the graphene/Ni hybrid mesh with the longest edge length. At a detection potential of 0.6 V, the edge-rich graphene/Ni hybrid mesh sensor exhibited a wide linear response range from 10.0 µM to 2.5 mM with a limit of detection of 1.8 µM and a high sensitivity of 1118.9 µA∙mM-1∙cm-2. Our findings suggest that edge-rich GMs can be valuable platforms in various graphene applications such as graphene-based EC sensors with controlled and improved performance.

Rosuvastatin Failed to Improve Arteriovenous Fistula Patency for Hemodialysis in Diabetic Patients - A Randomized Clinical Trial.

BACKGROUND: Very limited therapeutic strategies exist to prevent the primary failure of arteriovenous (AV) fistulas in patients with diabetes. OBJECTIVES: To investigate whether rosuvastatin could improve the primary patency of AV fistulas in diabetic patients with stage 5 chronic kidney disease (CKD). METHODS: This was a double-blind randomized clinical trial. From July 2012 to September 2018, patients aged between 18 and 65 years with type 2 diabetes and stage 5 CKD were randomized to receive placebo or rosuvastatin (5 mg/day) for 7 days prior to the creation of an AV fistula on the forearm until the 21st day after surgery. Patients were followed up for 180 days after the operation. The primary composite endpoint was the development of fistula immaturity or stenosis. The secondary endpoints were changes in inflammatory markers, oxidative stress, and occurrence of postoperative complications. RESULTS: A total of 60 patients were enrolled in the study. Rosuvastatin resulted in a 20% reduction in total cholesterol from postoperative day 0 to 28 (p = .0006). The overall rate of AV fistula failure (immaturity or stenosis) was 30%, with no significant difference between patients receiving rosuvastatin and those receiving the placebo (33.3% vs. 26.7%, p = .5731). Although not statistically significant, the administration of rosuvastatin might have increased the incidence of postoperative complications (2.99 vs. 2.39 event rate per 1000 patient-days; odds ratio, 1.33; p = .5986). CONCLUSIONS: Rosuvastatin showed no significant beneficial effects on the primary patency of AV fistulas in diabetic patients with stage 5 CKD, but might have been associated with the risk of drug-related complications.

Correlation of grain orientations and the thickness of gradient MoS2 films.

In this study, we synthesized gradient MoS2 films with a home-made suspended mask and characterized them by transmission electron microscopy (TEM) and Raman spectroscopy. The advantage of using gradient films is to simultaneously produce numerous samples under the same growth condition but with different thicknesses. The cross-sectional TEM images and their Fourier transform spectra revealed the thickness dependency of the grain orientations for synthetic MoS2 films. Combining the TEM results and the data of Raman A1g and E1 2g peaks, we found the correlation between the grain orientation and the A1g/E1 2g peak area ratio. We demonstrated the potential of using the non-polarized Raman Spectroscopy to characterize the grain structures of synthetic MoS2 films.

QD/2D Hybrid Nanoscrolls: A New Class of Materials for High-Performance Polarized Photodetection and Ultralow Threshold Laser Action.

Nanoscrolls are a class of nanostructures where atomic layers of 2D materials are stacked consecutively in a coaxial manner to form a 1D spiral topography. Self-assembly of chemical vapor deposition grown 2D WS2 monolayer into quasi-1D van der Waals scroll structure instigates a plethora of unique physiochemical properties significantly different from its 2D counterparts. The physical properties of such nanoscrolls can be greatly manipulated upon hybridizing them with high-quantum-yield colloidal quantum dots, forming 0D/2D structures. The efficient dissociation of excitons at the heterojunctions of QD/2D hybridized nanoscrolls exhibits a 3000-fold increased photosensitivity compared to the pristine 2D-material-based nanoscroll. The synergistic effects of confined geometry and efficient QD scatterers produce a nanocavity with multiple feedback loops, resulting in coherent lasing action with an unprecedentedly low lasing threshold. Predominant localization of the excitons along the circumference of this helical scroll results in a 12-fold brighter emission for the parallel-polarized transition compared to the perpendicular one, as confirmed by finite-difference time-domain simulation. The versatility of hybridized nanoscrolls and their unique properties opens up a powerful route for not-yet-realized devices toward practical applications.