Room-temperature low-threshold avalanche effect in stepwise van-der-Waals homojunction photodiodes.

Avalanche or carrier-multiplication effect, based on impact ionization processes in semiconductors, has a great potential for enhancing the performance of photodetector and solar cells. However, in practical applications, it suffers from high threshold energy, reducing the advantages of carrier multiplication. Here, we report on a low-threshold avalanche effect in a stepwise WSe2 structure, in which the combination of weak electron-phonon scattering and high electric fields leads to a low-loss carrier acceleration and multiplication. Owing to this effect, the room-temperature threshold energy approaches the fundamental limit, Ethre ≈ Eg, where Eg is the bandgap of the semiconductor. Our findings offer an alternative perspective on the design and fabrication of future avalanche and hot-carrier photovoltaic devices.

Black Arsenic Phosphorus Mid-Wave Infrared Barrier Detector with High Detectivity at Room Temperature.

The barrier structure is designed to enhance the operating temperature of the infrared detector, thereby improving the efficiency of collecting photogenerated carriers and reducing dark current generation, without suppressing the photocurrent. However, the development of barrier detectors using conventional materials is limited due to the strict requirements for lattice and band matching. In this study, a high-performance unipolar barrier detector is designed utilizing a black arsenic phosphorus/molybdenum disulfide/black phosphorus van der Waals heterojunction. The device exhibits a broad response bandwidth ranging from visible light to mid-wave infrared (520 nm to 4.6 µm), with a blackbody detectivity of 2.7 × 1010 cmHz-1/2 W-1 in the mid-wave infrared range at room temperature. Moreover, the optical absorption anisotropy of black arsenic phosphorus enables polarization resolution detection, achieving a polarization extinction ratio of 35.5 at 4.6 µm. Mid-wave infrared imaging of the device is successfully demonstrated at room temperature, highlighting the significant potential of barrier devices based on van der Waals heterojunctions in mid-wave infrared detection.

Non-volatile rippled-assisted optoelectronic array for all-day motion detection and recognition.

In-sensor processing has the potential to reduce the energy consumption and hardware complexity of motion detection and recognition. However, the state-of-the-art all-in-one array integration technologies with simultaneous broadband spectrum image capture (sensory), image memory (storage) and image processing (computation) functions are still insufficient. Here, macroscale (2 × 2 mm2) integration of a rippled-assisted optoelectronic array (18 × 18 pixels) for all-day motion detection and recognition. The rippled-assisted optoelectronic array exhibits remarkable uniformity in the memory window, optically stimulated non-volatile positive and negative photoconductance. Importantly, the array achieves an extensive optical storage dynamic range exceeding 106, and exceptionally high room-temperature mobility up to 406.7 cm2 V-1 s-1, four times higher than the International Roadmap for Device and Systems 2028 target. Additionally, the spectral range of each rippled-assisted optoelectronic processor covers visible to near-infrared (405 nm-940 nm), achieving function of motion detection and recognition.

Next-Generation Photodetectors beyond Van Der Waals Junctions.

With the continuous advancement of nanofabrication techniques, development of novel materials, and discovery of useful manipulation mechanisms in high-performance applications, especially photodetectors, the morphology of junction devices and the way junction devices are used are fundamentally revolutionized. Simultaneously, new types of photodetectors that do not rely on any junction, providing a high signal-to-noise ratio and multidimensional modulation, have also emerged. This review outlines a unique category of material systems supporting novel junction devices for high-performance detection, namely, the van der Waals materials, and systematically discusses new trends in the development of various types of devices beyond junctions. This field is far from mature and there are numerous methods to measure and evaluate photodetectors. Therefore, it is also aimed to provide a solution from the perspective of applications in this review. Finally, based on the insight into the unique properties of the material systems and the underlying microscopic mechanisms, emerging trends in junction devices are discussed, a new morphology of photodetectors is proposed, and some potential innovative directions in the subject area are suggested.

Low-Dimensional-Materials-Based Photodetectors for Next-Generation Polarized Detection and Imaging.

The vector characteristics of light and the vectorial transformations during its transmission lay a foundation for polarized photodetection of objects, which broadens the applications of related detectors in complex environments. With the breakthrough of low-dimensional materials (LDMs) in optics and electronics over the past few years, the combination of these novel LDMs and traditional working modes is expected to bring new development opportunities in this field. Here, the state-of-the-art progress of LDMs, as polarization-sensitive components in polarized photodetection and even the imaging, is the main focus, with emphasis on the relationship between traditional working principle of polarized photodetectors (PPs) and photoresponse mechanisms of LDMs. Particularly, from the view of constitutive equations, the existing works are reorganized, reclassified, and reviewed. Perspectives on the opportunities and challenges are also discussed. It is hoped that this work can provide a more general overview in the use of LDMs in this field, sorting out the way of related devices for "more than Moore" or even the "beyond Moore" research.

Gate-Tuning Hybrid Polaritons in Twisted α-MoO3/Graphene Heterostructures.

Modulating anisotropic phonon polaritons (PhPs) can open new avenues in infrared nanophotonics. Promising PhP dispersion engineering through polariton hybridization has been demonstrated by coupling gated graphene to single-layer α-MoO3. However, the mechanism underlying the gate-dependent modulation of hybridization has remained elusive. Here, using IR nanospectroscopic imaging, we demonstrate active modulation of the optical response function, quantified in measurements of gate dependence of wavelength, amplitude, and dissipation rate of the hybrid plasmon-phonon polaritons (HPPPs) in both single-layer and twisted bilayer α-MoO3/graphene heterostructures. Intriguingly, while graphene doping leads to a monotonic increase in HPPP wavelength, amplitude and dissipation rate show transition from an initially anticorrelated decrease to a correlated increase. We attribute this behavior to the intricate interplay of gate-dependent components of the HPPP complex momentum. Our results provide the foundation for active polariton control of integrated α-MoO3 nanophotonics devices.

Infrared HOT Photodetectors: Status and Outlook.

At the current stage of long-wavelength infrared (LWIR) detector technology development, the only commercially available detectors that operate at room temperature are thermal detectors. However, the efficiency of thermal detectors is modest: they exhibit a slow response time and are not very useful for multispectral detection. On the other hand, in order to reach better performance (higher detectivity, better response speed, and multispectral response), infrared (IR) photon detectors are used, requiring cryogenic cooling. This is a major obstacle to the wider use of IR technology. For this reason, significant efforts have been taken to increase the operating temperature, such as size, weight and power consumption (SWaP) reductions, resulting in lower IR system costs. Currently, efforts are aimed at developing photon-based infrared detectors, with performance being limited by background radiation noise. These requirements are formalized in the Law 19 standard for P-i-N HgCdTe photodiodes. In addition to typical semiconductor materials such as HgCdTe and type-II AIIIBV superlattices, new generations of materials (two-dimensional (2D) materials and colloidal quantum dots (CQDs)) distinguished by the physical properties required for infrared detection are being considered for future high-operating-temperature (HOT) IR devices. Based on the dark current density, responsivity and detectivity considerations, an attempt is made to determine the development of a next-gen IR photodetector in the near future.

Infrared avalanche photodiodes from bulk to 2D materials.

Avalanche photodiodes (APDs) have drawn huge interest in recent years and have been extensively used in a range of fields including the most important one-optical communication systems due to their time responses and high sensitivities. This article shows the evolution and the recent development of AIIIBV, AIIBVI, and potential alternatives to formerly mentioned-"third wave" superlattices (SL) and two-dimensional (2D) materials infrared (IR) APDs. In the beginning, the APDs fundamental operating principle is demonstrated together with progress in architecture. It is shown that the APDs evolution has moved the device's performance towards higher bandwidths, lower noise, and higher gain-bandwidth products. The material properties to reach both high gain and low excess noise for devices operating in different wavelength ranges were also considered showing the future progress and the research direction. More attention was paid to advances in AIIIBV APDs, such as AlInAsSb, which may be used in future optical communications, type-II superlattice (T2SLs, "Ga-based" and "Ga-free"), and 2D materials-based IR APDs. The latter-atomically thin 2D materials exhibit huge potential in APDs and could be considered as an alternative material to the well-known, sophisticated, and developed AIIIBV APD technologies to include single-photon detection mode. That is related to the fact that conventional bulk materials APDs' performance is restricted by reasonably high dark currents. One approach to resolve that problem seems to be implementing low-dimensional materials and structures as the APDs' active regions. The Schottky barrier and atomic level thicknesses lead to the 2D APD dark current significant suppression. What is more, APDs can operate within visible (VIS), near-infrared (NIR)/mid-wavelength infrared range (MWIR), with a responsivity ~80 A/W, external quantum efficiency ~24.8%, gain ~105 for MWIR [wavelength, λ = 4 µm, temperature, T = 10-180 K, Black Phosphorous (BP)/InSe APD]. It is believed that the 2D APD could prove themselves to be an alternative providing a viable method for device fabrication with simultaneous high-performance-sensitivity and low excess noise.

Water-Induced Bandgap Engineering in Nanoribbons of Hexagonal Boron Nitride.

Different from hexagonal boron nitride (hBN) sheets, the bandgap of hBN nanoribbons (BNNRs) can be changed by spatial/electrostatic confinement. It is predicted that a transverse electric field can narrow the bandgap and even cause an insulator-metal transition in BNNRs. However, experimentally introducing an overhigh electric field across the BNNR remains challenging. Here, it is theoretically and experimentally demonstrated that water adsorption greatly reduces the bandgap of zigzag-oriented BNNRs (zBNNRs). Ab initio calculations show that water molecules can be favorably assembled within the trench between two adjacent BNNRs to form a polar ice layer, which induces a transverse equivalent electric field of over 2 V nm-1 accounting for the bandgap reduction. Field-effect transistors are successfully fabricated from zBNNRs with different widths. The conductance of water-adsorbed zBNNRs can be tuned over 3 orders in magnitude via modulation of the equivalent electrical field at room temperature. Furthermore, photocurrent response measurements are taken to determine the optical bandgaps of zBNNRs with water adsorption. The zBNNR with increased width can exhibit a bandgap down to 1.17 eV. This study offers fundamental insights into new routes toward realizing electronic/optoelectronic devices and circuits based on hexagonal boron nitride.

Configurable circular-polarization-dependent optoelectronic silent state for ultrahigh light ellipticity discrimination.

Filterless light-ellipticity-sensitive optoelectronic response generally has low discrimination, thus severely hindering the development of monolithic polarization detectors. Here, we achieve a breakthrough based on a configurable circular-polarization-dependent optoelectronic silent state created by the superposition of two photoresponses with enantiomerically opposite ellipticity dependences. The zero photocurrent and the significantly suppressed noise of the optoelectronic silent state singularly enhance the circular polarization extinction ratio (CPER) and the sensitivity to light ellipticity perturbation. The CPER of our device approaches infinity by the traditional definition. The newly established CPER taking noise into account is 3-4 orders of magnitude higher than those of ordinary integrated circular polarization detectors, and it remains high in an expanded wavelength range. The noise equivalent light ellipticity difference goes below 0.009° Hz-1/2 at modulation frequencies above 1000 Hz by a light power of 281 µW. This scheme brings a leap in developing monolithic ultracompact circular polarization detectors.

Discovery of spectacular quasar-driven superbubbles in red quasars.

Quasar-driven outflows on galactic scales are a routinely invoked ingredient for galaxy formation models. We report the discovery of ionized gas nebulae surrounding three luminous red quasars at z ~ 0.4 from Gemini integral field unit observations. All these nebulae feature unprecedented pairs of "superbubbles" extending ~20 kpc in diameter, and the line-of-sight velocity difference between the red- and blueshifted bubbles reaches up to ~1200 km/s. Their spectacular dual-bubble morphology (in analogy to the galactic "Fermi bubbles") and their kinematics provide unambiguous evidence for galaxy-wide quasar-driven outflows, in parallel with the quasi-spherical outflows similar in size from luminous type 1 and type 2 quasars at concordant redshift. These bubble pairs manifest themselves as a signpost of the short-lived superbubble "break-out" phase, when the quasar wind drives the bubbles to escape the confinement from the dense environment and plunge into the galactic halo with a high-velocity expansion.

Reconfigurable, non-volatile neuromorphic photovoltaics.

The neural network image sensor-which mimics neurobiological functions of the human retina-has recently been demonstrated to simultaneously sense and process optical images. However, highly tunable responsivity concurrent with non-volatile storage of image data in the neural network would allow a transformative leap in compactness and function of these artificial neural networks. Here, we demonstrate a reconfigurable and non-volatile neuromorphic device based on two-dimensional semiconducting metal sulfides that is concurrently a photovoltaic detector. The device is based on a metal-semiconductor-metal (MSM) two-terminal structure with pulse-tunable sulfur vacancies at the M-S junctions. By modulating sulfur vacancy concentrations, the polarities of short-circuit photocurrent can be changed with multiple stable magnitudes. The bias-induced motion of sulfur vacancies leads to highly reconfigurable responsivities by dynamically modulating the Schottky barriers. A convolutional neuromorphic network is finally designed for image processing and object detection using the same device. The results demonstrated that neuromorphic photodetectors can be the key components of visual perception hardware.

Ultranarrow-band filterless photodetectors based on CH3NH3PbClxBr3-xmixed-halide perovskite single crystals.

Narrow-band photodetectors based on halide perovskite have recently attracted significant attention due to their exceptional narrow-band detection performance and tunable absorption peaks covering a wide optical range. In this work, we report mixed-halide CH3NH3PbClxBr3-xsingle crystal-based photodetectors have been fabricated, where the Cl/Br ratios were varied (3:0, 10:1, 5:1, 1:1, 1:7, 1:14 and 0:3). Vertical and parallel structures devices were fabricated which exhibited ultranarrow spectral responses under bottom illumination, with a full-width at half-maximum less than 16 nm. The observed performance can be ascribed to the unique carrier generation and extraction mechanisms within the single crystal under short and long wavelength of illumination. These findings offer valuable insights into the development of narrow-band photodetectors that do not necessitate the use of filters and hold tremendous potential for a diverse array of applications.

Synergistic effects of extrinsic photoconduction and photogating in a short-wavelength ZrS3 infrared photodetector.

Two-dimensional (2D) material-based photodetectors, especially those working in the infrared band, have shown great application potential in the thermal imaging, optical communication, and medicine fields. Designing 2D material photodetectors with broadened detection band and enhanced responsivity has become an attractive but challenging research direction. To solve this issue, we report a zirconium trisulfide (ZrS3) infrared photodetector with enhanced and broadened response with the assistance of the synergistic effects of extrinsic photoconduction and photogating effect. The ZrS3 photodetectors can detect infrared light up to 2 µm by extrinsic photoconduction and exhibit a responsivity of 100 mA W-1 under 1550 nm illumination. Furthermore, the ZrS3 infrared photodetectors with an oxide layer show a triple enhanced responsivity due to the photogating effect. Additionally, the infrared imaging capability of the ZrS3 infrared photodetectors is also demonstrated. This work provides a potential way to extend the response range and improve the responsivity for nanomaterial-based photodetectors at the same time.

How to characterize figures of merit of two-dimensional photodetectors.

Photodetectors based on two-dimensional (2D) materials have been the focus of intensive research and development over the past decade. However, a gap has long persisted between fundamental research and mature applications. One of the main reasons behind this gap has been the lack of a practical and unified approach for the characterization of their figures of merit, which should be compatible with the traditional performance evaluation system of photodetectors. This is essential to determine the degree of compatibility of laboratory prototypes with industrial technologies. Here we propose general guidelines for the characterization of the figures of merit of 2D photodetectors and analyze common situations when the specific detectivity, responsivity, dark current, and speed can be misestimated. Our guidelines should help improve the standardization and industrial compatibility of 2D photodetectors.

Reversible Entropy-Driven Defect Migration and Insulator-Metal Transition Suppression in VO2 Nanostructures for Phase-Change Electronic Switching.

Oxygen defects are among essential issues and required to be manipulated in correlated electronic oxides with insulator-metal transition (IMT). Besides, surface and interface control are necessary but challenging in field-induced electronic switching towards advanced IMT-triggered transistors and optical modulators. Herein, we demonstrated reversible entropy-driven oxygen defect migrations and reversible IMT suppression in vanadium dioxide (VO2 ) phase-change electronic switching. The initial IMT was suppressed with oxygen defects, which is caused by the entropy change during reversed surface oxygen ionosorption on the VO2 nanostructures. This IMT suppression is reversible and reverts when the adsorbed oxygen extracts electrons from the surface and heals defects again. The reversible IMT suppression observed in the VO2 nanobeam with M2 phase is accompanied by large variations in the IMT temperature. We also achieved irreversible and stable IMT by exploiting an Al2 O3 partition layer prepared by atomic layer deposition (ALD) to disrupt the entropy-driven defect migration. We expected that such reversible modulations would be helpful for understanding the origin of surface-driven IMT in correlated vanadium oxides, and constructing functional phase-change electronic and optical devices.

Substrate engineering for wafer-scale two-dimensional material growth: strategies, mechanisms, and perspectives.

The fabrication of wafer-scale two-dimensional (2D) materials is a prerequisite and important step for their industrial applications. Chemical vapor deposition (CVD) is the most promising approach to produce high-quality films in a scalable way. Recent breakthroughs in the epitaxy of wafer-scale single-crystalline graphene, hexagonal boron nitride, and transition-metal dichalcogenides highlight the pivotal roles of substrate engineering by lattice orientation, surface steps, and energy considerations. This review focuses on the existing strategies and underlying mechanisms, and discusses future directions in epitaxial substrate engineering to deliver wafer-scale 2D materials for integrated electronics and photonics.

Uniaxial Strain-Induced Tunable Mid-infrared Light Emission from Thin Film Black Phosphorus.

Strain engineering is a powerful tool that can modulate semiconductor device performance. Here, we demonstrate that the bandgap of thin film (∼40 nm) black phosphorus (bP) can be continuously tuned from 2.9 to 3.9 µm by applying an in-plane uniaxial strain, as evidenced by mid-infrared photoluminescence (PL) spectroscopy. The deduced bandgap strain coefficients are ∼103 meV %-1, which coincide with those obtained in few-layer bP. On the basis of first-principles calculations, the origin of the uniaxial tensile strain-induced PL enhancement is suggested to be due to the increase in both the effective mass ratio (me*/mh*) and the bandgap, leading to the increment of the radiative efficiency. Moreover, the mid-infrared PL emission remains perfectly linear-polarized along the armchair direction regardless of tensile or compressive strain. The highly tunable bandgap of bP in the mid-infrared regime opens up opportunities for the realization of mid-infrared light-emitting diodes and lasers using layered materials.

Graphene/MoS2-xOx/graphene photomemristor with tunable non-volatile responsivities for neuromorphic vision processing.

Conventional artificial intelligence (AI) machine vision technology, based on the von Neumann architecture, uses separate sensing, computing, and storage units to process huge amounts of vision data generated in sensory terminals. The frequent movement of redundant data between sensors, processors and memory, however, results in high-power consumption and latency. A more efficient approach is to offload some of the memory and computational tasks to sensor elements that can perceive and process the optical signal simultaneously. Here, we proposed a non-volatile photomemristor, in which the reconfigurable responsivity can be modulated by the charge and/or photon flux through it and further stored in the device. The non-volatile photomemristor has a simple two-terminal architecture, in which photoexcited carriers and oxygen-related ions are coupled, leading to a displaced and pinched hysteresis in the current-voltage characteristics. For the first time, non-volatile photomemristors implement computationally complete logic with photoresponse-stateful operations, for which the same photomemristor serves as both a logic gate and memory, using photoresponse as a physical state variable instead of light, voltage and memresistance. The polarity reversal of photomemristors shows great potential for in-memory sensing and computing with feature extraction and image recognition for neuromorphic vision.