ABSTRACT
Formaldehyde (HCHO) is a crucial C1 building block for daily-life commodities in a wide range of industrial processes. Industrial production of HCHO today is based on energy- and cost-intensive gas-phase catalytic oxidation of methanol, which calls for exploring other and more sustainable ways of carrying out this process. Utilization of carbon dioxide (CO2 ) as precursor presents a promising strategy to simultaneously mitigate the carbon footprint and alleviate environmental issues. This Minireview summarizes recent progress in CO2 -to-HCHO conversion using hydrogenation, hydroboration/hydrosilylation as well as photochemical, electrochemical, photoelectrochemical, and enzymatic approaches. The active species, reaction intermediates, and mechanistic pathways are discussed to deepen the understanding of HCHO selectivity issues. Finally, shortcomings and prospects of the various strategies for sustainable reduction of CO2 to HCHO are discussed.
Subject(s)
Carbon Dioxide , Formaldehyde , Catalysis , Methanol/metabolism , Oxidation-ReductionABSTRACT
It is still a great challenge to explore hydrogen evolution reaction (HER) electrocatalysts with both lower overpotential and higher stability in acidic electrolytes. In this work, an efficient HER catalyst, Ru@COF-1, is prepared by complexation of triazine-cored sp2 carbon-conjugated covalent organic frameworks (COFs) with ruthenium ion. Ru@COF-1 possesses high crystallinity and porosity, which are beneficial for electrocatalysis. The large specific surface area and regular porous channels of Ru@COF-1 facilitate full contact between reactants and catalytic sites. The nitrogen atoms of triazines are protonated in the acidic media, which greatly improve the conductivity of Ru@COF-1. This synergistic effect makes the overpotential of Ru@COF-1 about 200 mV at 10 mA cm-2 , which is lower than other reported COFs-based electrocatalysts. Moreover, Ru@COF-1 exhibits exceptionally electrocatalytic durability in the acidic electrolytes. It is particularly stable and remains highly active after 1000 cyclic voltammetry cycles. Density functional theory calculations demonstrate that tetracoordinated Ru-N2 Cl2 moieties are the major contributors to the outstanding HER performance. This work provides a new idea for developing protonated HER electrocatalysts in acidic media.
ABSTRACT
Recovery of the nitrogen (N) and phosphorus (P) in wastewater would help to minimize eutrophication and their reuse would lead to a more sustainable society. Sewage sludge and fly ash were used to fabricate ceramsite in the laboratory. After modified with alkali or lanthanum it was shown in benchtop experiments to effectively recover N and P from real wastewater treatment plant effluent. The N&P-adsorbed ceramsite was then applied as an eco-friendly, slow-release fertilizer to promote the germination, growth and blooming of Impatiens commelinoides, realizing the recycling of N and P from wastewater. Emergy analysis shows that such recycling is more sustainable than the current two approaches (i.e., landfill and incineration) for sludge disposal. This work thus demonstrates a sustainable solution combining the reuse of solid waste, effective wastewater purification and recovery of N and P nutrients. Applying the technologies demonstrated would help to minimize the environmental impact of wastewater and solid waste.
Subject(s)
Phosphorus , Wastewater , Adsorption , Complex Mixtures , Nitrogen , Sewage , Waste Disposal, FluidABSTRACT
A nitrogen-stabilized single-atom catalyst containing low-valence zinc atoms (Znδ+ -NC) is reported. It contains saturated four-coordinate (Zn-N4 ) and unsaturated three-coordinate (Zn-N3 ) sites. The latter makes Zn a low-valence state, as deduced from X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, electron paramagnetic resonance, and density functional theory. Znδ+ -NC catalyzes electrochemical reduction of CO2 to CO with near-unity selectivity in water at an overpotential as low as 310â mV. A current density up to 1â A cm-2 can be achieved together with high CO selectivity of >95 % using Znδ+ -NC in a flow cell. Calculations suggest that the unsaturated Zn-N3 could dramatically reduce the energy barrier by stabilizing the COOH* intermediate owing to the electron-rich environment of Zn. This work sheds light on the relationship among coordination number, valence state, and catalytic performance and achieves high current densities relevant for industrial applications.
ABSTRACT
Electrochemical dechlorination is a prospective strategy to remediate trichloroethylene (TCE)-contaminated groundwater. In this work, iron-nitrogen-doped carbon (FeNC) mimicking microbiological dechlorination coenzymes was developed for TCE removal under environmentally related conditions. The biomimetic FeNC-900, FeNC-1000, and FeNC-1100 materials were synthesized via pyrolysis at different temperatures (900, 1000, and 1100 °C). Due to the synergistic effect of Fe-N4 active sites and graphitic N sites, FeNC-1000 had the highest electron transfer efficiency and the largest electrochemical active surface area among the as-synthesized FeNC catalysts. The pseudo-first-order rate constants for TCE reduction using FeNC-1000 catalyst are 0.19, 0.28 and 0.36 h-1 at potentials of -0.8 V, -1.0 V and -1.2 V, respectively. Active hydrogen and direct electrons transfer both contribute to the dechlorination from TCE to C2H4 and C2H6. FeNC maintain a high reactivity after five reuse cycles. Our study provides a novel approach for the dechlorination of chlorinated organic contaminants in groundwater.
Subject(s)
Groundwater , Trichloroethylene , Biomimetics , Carbon , Iron , Nitrogen , Prospective StudiesABSTRACT
A straightforward procedure has been developed to prepare a porous carbon material decorated with iron by direct pyrolysis of a mixture of a porous polymer and iron chloride. Characterization of the material with X-ray diffraction, X-ray absorption spectroscopy, and electron microscopy indicates the presence of iron carbide nanoparticles encapsulated inside the carbon matrix, and elemental mapping and cyanide poisoning experiments demonstrate the presence of atomic Fe centers, albeit in trace amounts, which are active sites for electrochemical CO2 reduction. The encapsulated iron carbide nanoparticles are found to boost the catalytic activity of atomic Fe sites in the outer carbon layers, rendering the material highly active and selective for CO2 reduction, although these atomic Fe sites are only present in trace amounts. The target material exhibits near-unity selectivity (98 %) for CO2 -to-CO conversion at a small overpotential (410â mV) in water. Furthermore, the material holds potential for practical application, as a current density over 30â mA cm-2 and a selectivity of 93 % can be achieved in a flow cell.
ABSTRACT
Developing efficient catalysts for persulfate (PS) activation is important for the potential application of sulfate-radical-based advanced oxidation process. Herein, we demonstrate single iron atoms confined in MoS2 nanosheets with dual catalytic sites and synergistic catalysis as highly reactive and stable catalysts for efficient catalytic oxidation of recalcitrant organic pollutants via activation of PS. The dual reaction sites and the interaction between Fe and Mo greatly enhance the catalytic performance for PS activation. The radical scavenger experiments and electron paramagnetic resonance results confirm and SO4- rather than HO is responsible for aniline degradation. The high catalytic performance of Fe0.36Mo0.64S2 was interpreted by density functional theory (DFT) calculations via strong metal-support interactions and the low formal oxidation state of Fe in FexMo1-xS2. FexMo1-xS2/PS system can effectively remove various persistent organic pollutants and works well in a real water environment. Also, FexMo1-xS2 can efficiently activate peroxymonosulfate, sulfite and H2O2, suggesting its potential practical applications under various circumstances.
ABSTRACT
Organic micro- and nanostructures are expected to be promising candidates for micro- and nanophotonic materials with desirable properties owing to their low cost, flexible molecular design, and tunable self-assembly. Among these candidates, well-known squaraine dyes (SQs) have rarely been investigated because of their nonfluorescent properties in the solid state and because their optical behavior varies with changes in morphology. In this contribution, two novel 1,2-SQs, SQM and SQB, with strong bright-yellow to red fluorescence emission in the crystalline state, were designed and structured at the molecular level and by solvent adjustment. Their self-assembly behavior was studied, and it was revealed that the SQM assembly provided 1D microrods, whereas 1D microrods (Z-SQBâ CH2 Cl2 ) and 2D microplates (E-SQBâ 2 CH3 OH) could be obtained from SQB assemblies through a solution-based self-assembly method. The varied assembly behaviors of these SQs were attributed to different π-π stacking interactions that resulted in different molecular conformations and packing modes. These assemblies exhibited distinct optical properties, and in particular, SQBâ solvent assemblies showed multiple thermo- and vapochromic effects. Thus, the SQB assemblies are potential fluorescent sensors for organic solvent vapors. More importantly, favorable optical-waveguide properties were observed in these SQ-based microstructures.
ABSTRACT
A general approach to prepare composite films of metal-organic frameworks and graphene has been developed. Films of copper(ii)-based HKUST-1 and HKUST-1/graphene composites were grown solvothermally on glassy carbon electrodes. The films were chemically tethered to the substrate by diazonium electrografting resulting in a large electrode coverage and good stability in solution for electrochemical studies. HKUST-1 has poor electrical conductivity, but we demonstrate that the addition of graphene to HKUST-1 partially restores the electrochemical activity of the electrodes. The enhanced activity, however, does not result in copper(ii) to copper(i) reduction in HKUST-1 at negative potentials. The materials were characterised in-depth: microscopy and grazing incidence X-ray diffraction demonstrate uniform films of crystalline HKUST-1, and Raman spectroscopy reveals that graphene is homogeneously distributed in the films. Gas sorption studies show that both HKUST-1 and HKUST-1/graphene have a large CO2/N2 selectivity, but the composite has a lower surface area and CO2 adsorption capacity in comparison with HKUST-1, while CO2 binds stronger to the composite at low pressures. Electron paramagnetic resonance spectroscopy reveals that both monomeric and dimeric copper units are present in the materials, and that the two materials behave differently upon hydration, i.e. HKUST-1/graphene reacts slower by interaction with water. The changed gas/vapour sorption properties and the improved electrochemical activity are two independent consequences of combining graphene with HKUST-1.
ABSTRACT
Significant efforts have been devoted over the last few years to develop efficient molecular electrocatalysts for the electrochemical reduction of carbon dioxide to carbon monoxide, the latter being an industrially important feedstock for the synthesis of bulk and fine chemicals. Whereas these efforts primarily focus on this formal oxygen abstraction step, there are no reports on the exploitation of the chemistry for scalable applications in carbonylation reactions. Here we describe the design and application of an inexpensive and user-friendly electrochemical set-up combined with the two-chamber technology for performing Pd-catalysed carbonylation reactions including amino- and alkoxycarbonylations, as well as carbonylative Sonogashira and Suzuki couplings with near stoichiometric carbon monoxide. The combined two-reaction process allows for milligram to gram synthesis of pharmaceutically relevant compounds. Moreover, this technology can be adapted to the use of atmospheric carbon dioxide.Electroreduction of CO2 to CO is a potential valorisation pathway of carbon dioxide for fine chemicals production. Here, the authors show a user-friendly device that couples CO2 electroreduction with carbonylation chemistry for up to gram scale synthesis of pharmaceuticals even under atmospheric CO2.
ABSTRACT
In a comparative study of the electrocatalytic CO2 reduction, cobalt meso-tetraphenylporphyrin (CoTPP) is used as a model molecular catalyst under both homogeneous and heterogeneous conditions. In the former case, employing N,N-dimethylformamide as solvent, CoTPP performs poorly as an electrocatalyst giving low product selectivity in a slow reaction at a high overpotential. However, upon straightforward immobilization of CoTPP onto carbon nanotubes, a remarkable enhancement of the electrocatalytic abilities is seen with CO2 becoming selectively reduced to CO (>90 %) at a low overpotential in aqueous medium. This effect is ascribed to the particular environment created by the aqueous medium at the catalytic site of the immobilized catalyst that facilitates the adsorption and further reaction of CO2 . This work highlights the significance of assessing an immobilized molecular catalyst from more than homogeneous measurements alone.
ABSTRACT
Using a one-step electropolymerisation procedure, CO2 absorbing microporous carbazole-functionalised films of iron porphyrins are prepared in a controlled manner. The electrocatalytic reduction of CO2 for these films is investigated to elucidate their efficiency and the origin of their ultimate degradation.
ABSTRACT
Tetraphenylethylene (TPE)-based glycoconjugates were easily synthesized by copper(I)-catalyzed "click reactions" between propargyl-attached TPE and azido-functionalized sugars. The TPE compound bearing lactosyl moieties (Lac-TPE) was found to be a fluorescence "turn-on" sensor for cholera toxin by virtue of aggregation-induced emission characteristics of the TPE motif owing to the specific interaction of lactose with the cholera toxin B subunit, whilst a cellobiose-functionalized TPE derivative did not show any response to the toxin. Therefore, Lac-TPE shows promising applications in the detection of cholera toxin, as well as in the investigation of carbohydrate-protein interaction.