Partitioning urban forest evapotranspiration based on integrating eddy covariance of water vapor and carbon dioxide fluxes.

Partitioning of evapotranspiration (ET) in urban forest lands plays a vital role in mitigating ambient temperature and evaluating the effects of urbanization on the urban hydrological cycle. While ET partitioning has been extensively studied in diverse natural ecosystems, there remains a significant paucity of research on urban ecosystems. The flux variance similarity (FVS) theory is used to partition urban forest ET into soil evaporation (E) and vegetation transpiration (T). This involves measurements from eddy covariance of water vapor and carbon dioxide fluxes, along with an estimated leaf-level water use efficiency (WUE) algorithm. The study compares five WUE algorithms in partitioning the average transpiration fraction (T/ET) and validates the results using two years of oxygen isotope observations. Although all five FVS-based WUE algorithms effectively capture the dynamic changes in hourly scale T and E across the four seasons, the algorithm that assumes a constant ratio of intercellular CO2 concentration (ci) to ambient CO2 concentration (ca) provides the most accurate simulation results for the ratio of T/ET. The performance metrics for this specific algorithm include the RMSE of 0.06, R2 of 0.88, the bias of 0.02, and MAPE of 8.9 %, respectively. Comparing urban forests to natural forests, the T/ET in urban areas is approximately 2.4-25.3 % higher, possibly due to the elevated air temperature (Ta), greater leaf area index (LAI), and increased soil water availability. Correlation analysis reveals that the T/ET dynamic is primarily controlled by Ta, LAI, net radiation, ca, and soil water content at half-hourly, daily, and monthly scales. This research provides valuable insights into the performance and applicability of various WUE algorithms in urban forests, contributing significantly to understanding the impact of urbanization on energy, water, and carbon cycles within ecosystems.

A Solvent-Templated Porous Liquid Crystal Elastomer with Tactile Sensation beyond Reversible Actuation toward Versatile Artificial Muscles.

Liquid crystal elastomers (LCEs), as a classical two-way shape-memory material, are good candidates for developing artificial muscles that mimic the contraction, expansion, or rotational behavior of natural muscles. However, biomimicry is currently focused more on the actuation functions of natural muscles dominated by muscle fibers, whereas the tactile sensing functions that are dominated by neuronal receptors and synapses have not been well captured. Very few studies have reported the sensing concept for LCEs, but the signals were still donated by macroscopic actuation, that is, variations in angle or length. Herein, we develop a conductive porous LCE (CPLCE) using a solvent (dimethyl sulfoxide (DMSO))-templated photo-cross-linking strategy, followed by carbon nanotube (CNT) incorporation. The CPLCE has excellent reversible contraction/elongation behavior in a manner similar to the actuation functions of skeletal muscles. Moreover, the CPLCE shows excellent pressure-sensing performance by providing real-time electrical signals and is capable of microtouch sensing, which is very similar to natural tactile sensing. Furthermore, macroscopic actuation and tactile sensation can be integrated into a single system. Proof-of-concept studies reveal that the CPLCE-based artificial muscle is sensitive to external touch while maintaining its excellent actuation performance. The CPLCE with tactile sensation beyond reversible actuation is expected to benefit the development of versatile artificial muscles and intelligent robots.

A sequential macrophage activation strategy for bone regeneration: A micro/nano strontium-releasing composite scaffold loaded with lipopolysaccharide.

Effective tissue repair relies on the orchestration of different macrophage phenotypes, both the M2 phenotype (promotes tissue repair) and M1 phenotype (pro-inflammatory) deserve attention. In this study, we propose a sequential immune activation strategy to mediate bone regeneration, by loading lipopolysaccharide (LPS) onto the surface of a strontium (Sr) ions -contained composite scaffold, which was fabricated by combining Sr-doped micro/nano-hydroxyapatite (HA) and dual degradable matrices of polycaprolactone (PCL) and poly (lactic-co-glycolic acid) (PLGA). Our strategy involves the sequential release of LPS to promote macrophage homing and induce the expression of the pro-inflammatory M1 phenotype, followed by the release of Sr ions to suppress inflammation. In vitro and in vivo experiments demonstrated that, the appropriate pro-inflammatory effects at the initial stage of implantation, along with the anti-inflammatory effects at the later stage, as well as the structural stability of the scaffolds conferred by the composition, can synergistically promote the regeneration and repair of bone defects.

Effects of microplastics on microbial community structure and wheatgrass traits in Pb-contaminated riparian sediments under flood-drainage-planting conditions.

The coexistence of microplastics (MPs) and heavy metals in sediments has caused a potential threat to sediment biota. However, differences in the effects of MPs and heavy metals on microbes and plants in sediments under different sediment conditions remain unclear. Hence, we investigated the influence of polyethylene (PE) and polylactic acid (PLA) MPs on microbial community structure, Pb bioavailability, and wheatgrass traits under sequential incubation of sediments (i.e., flood, drainage, and planting stages). Results showed that the sediment enzyme activities presented a dose-dependent effect of MPs. Besides, 10 % PLA MPs significantly increased the F1 fractions in three stages by 11.13 %, 30.10 %, and 17.26 %, respectively, thus resulting in higher Pb mobility and biotoxicity. MPs altered sediment bacterial composition and structures, and bacterial community differences were evident in different incubation stages. Moreover, the co-exposure of PLA MPs and Pb significantly decreased the shoot length and total biomass of wheatgrass and correspondingly activated the antioxidant enzyme activity. Further correlation analysis demonstrated that community structure induced by MPs was mainly driven by sediment enzyme activity. This study contributes to elucidating the combined effects of MPs and heavy metals on sediment ecosystems under different sediment conditions.

Effects of microplastics on sedimentary geochemical properties and microbial ecosystems combined with hydraulic disturbance.

Microplastics (MPs) pollution is widely investigated owing to its potential threats to river ecosystems. However, it remains unclear whether hydraulic disturbance deepens or mitigates the effects of MPs-contaminated sediments on the river environment. Herein, we studied the impact of sediment aggregates, organic matter, and enzyme activity, with emphasis on microbial community structure and function in sediments exposed to MPs (1 %, 5 %, and 10 % w/w) in conjunction with hydraulic disturbance. The experimental results showed that the influence of MPs on the sediment under hydraulic disturbance is more significant than that of static culture, especially for various environmental factors (MWD, MBC, and sucrase activity etc.). The proportions of the >0.05 mm-fraction aggregates increased from 74-76 % to 82-88 % in the sediment throughout the entire disturbance process. It has been found that the disturbance generally promotes the interaction between MPs and sediments. FAPROTAX analysis demonstrated that the disturbance reduced the difference in effects on microbial functional genes between the control group and the MPs-added groups by up to 10 times, suggesting that the effects of disturbance on MPs-contaminated sediments are relatively complex. This work provides new insights into the effects of hydraulic disturbance on physicochemical properties and microbial communities of MPs-contaminated sediment.

An overview of quorum sensing in shaping activated sludge forms: Mechanisms, applications and challenges.

Activated sludge method is an effective method for the wastewater treatment and has been widely applied. Activated sludge usually exists in various forms such as activated sludge floc, biofilm and granule. Due to the different character and function for each sludge type, the role and mechanism in the wastewater treatment process are also different, but all were crucial. The quorum sensing (QS) /quorum quenching (QQ) have been demonstrated and proved to regulate the group behavior by secreting signaling molecules among microorganisms and thus affect the manifestation of sludge. However, the complex mechanisms and regulatory strategies of QS/QQ in sludge forms have not been systematically summarized. This review provided an overview on the mechanism of QS/QQ shaping sludge forms from macro to micro (Explore it through signaling molecules, extracellular polymeric substances and microorganisms). In addition, the application and challenges of QS/QQ regulating sludge forms in various wastewater treatment processes including biofilm batch reactor, granule sludge and membrane bioreactor were discussed. Finally, some suggestions for further research and development of effective and economical QS/QQ strategies are put forward.

Transcriptome disclosure of hormones inducing stigma exsertion in Nicotiana tabacum by corolla shortening.

BACKGROUND: Stigma exsertion is an essential agricultural trait that can promote cross-pollination to improve hybrid seed production efficiency. However, the molecular mechanism controlling stigma exsertion remains unknown. RESULTS: In this study, the Nicotiana tabacum cv. K326 and its two homonuclear-heteroplasmic lines, MSK326 (male-sterile) and MSK326SE (male-sterile and stigma exserted), were used to investigate the mechanism of tobacco stigma exsertion. A comparison of the flowers between the three lines showed that the stigma exsertion of MSK326SE was mainly due to corolla shortening. Therefore, the corollas of the three lines were sampled and presented for RNA-seq analysis, which found 338 candidate genes that may cause corolla shortening. These genes were equally expressed in K326 and MSK326, but differentially expressed in MSK326SE. Among these 338 genes, 15 were involved in hormone synthesis or signal transduction pathways. Consistently, the content of auxin, dihydrozeatin, gibberellin, and jasmonic acid was significantly decreased in the MSK326SE corolla, whereas abscisic acid levels were significantly increased. Additionally, seven genes involved in cell division, cell cycle, or cell expansion were identified. Protein-protein interaction network analysis identified 45 nodes and 79 protein interactions, and the largest module contained 20 nodes and 52 protein interactions, mainly involved in the hormone signal transduction and pathogen defensive pathways. Furthermore, a putative hub gene coding a serine/threonine-protein kinase was identified for the network. CONCLUSIONS: Our results suggest that hormones may play a key role in regulating tobacco stigma exsertion induced by corolla shortening.

Spatiotemporal variation reconstruction of total phosphorus in the Great Lakes since 2002 using remote sensing and deep neural network.

Total phosphorus (TP) is non-optically active, thus TP concentration (CTP) estimation using remote sensing still exists grand challenge. This study developed a deep neural network model (DNN) for CTP estimation with synchronous in-situ measurements and MODIS-derived remote sensing reflectance (Rrs) (N = 3916). Using DNN, the annual and intra-annual CTP spatial distributions of the Great Lakes since 2002 were reconstructed. Then, the reconstructions were correlated to nine potential factors, e.g., Chlorophyll-a, snowmelt, and cropland, to explain seasonal and long-term CTP variations. The results showed that DNN reliably estimated CTP from MODIS Rrs, with R2, mean absolute error (MAE), root mean squared error (RMSE), mean absolute percentage error (MAPE), and root mean squared logarithmic error (RMSLE) of 0.83, 1.05 µg/L, 2.95 µg/L, 9.92%, and 0.13 on the test set. The near-surface CTP in the Great Lakes decreased significantly (p < 0.05) during 2002 - 2022, primarily attributed to cropland reduction, coupled with improvements in basin natural ecosystems. The sensitivity analysis verified the model robustness when confronted with input feature changes < 35%. This result along with the marginal difference between CTP derived from two sensors (R2 = 0.76, MAE = 2.12 µg/L, RMSE = 2.51 µg/L, MAPE = 11.52%, RMSLE = 0.24) suggested the model transferability from MODIS to VIIRS. This transformation facilitated optimal usage of MODIS-related archive and enhanced the continuity of CTP estimation at moderate resolution. This study presents a practical method for spatiotemporal reconstruction of CTP using remote sensing, and contributes to better understandings of driving factors behind CTP variations in the Great Lakes.

Impact of polyamide microplastics on riparian sediment structures and Cd(II) adsorption: A comparison of natural exposure, dry-wet cycles, and freeze-thaw cycles.

Microplastics (MPs) accumulation in sediments has posed a huge threat to freshwater ecosystems. However, it is still unclear the effect of MPs on riparian sediment structures and contaminant adsorption under different hydrological processes. In this study, three concentrations of polyamide (PA) MPs-treated sediments (0.1%, 1%, and 10%, w/w) were subjected to natural (NA) exposure, dry-wet (DW) cycles, and freeze-thaw (FT) cycles. The results indicated that PA MPs-added sediment increased the micro-aggregates by 10.1%-18.6% after FT cycles, leading to a decrease in aggregate stability. The pH, OM, and DOC of sediments were significantly increased in DW and FT treatments. In addition, the increasing concentration of PA MPs showed an obvious decrease in aromaticity, humification, and molecular weight of sediment DOM in FT treatments. Also, high level of MPs was more likely to inhibit the formation of humic-like substances and tryptophan-like proteins. For DW and FT cycles, 0.1% and 1% PA MPs-treated sediments slightly increased the adsorption capacity of Cd(II), which may be ascribed to the aging of MPs. Further correlation analysis found that DW and FT altered the link between DOM indicators, and aggregate stability was directly related to the changes in sediment organic carbon. Our findings revealed the ecological risk of MPs accumulating in riparian sediments under typical hydrological processes.

Isolation and application of Bacillus thuringiensis LZX01: Efficient membrane biofouling mitigation function and anti-toxicity potential.

Significant progress has been made in mitigating membrane biofouling by microbial quorum quenching (QQ). More efficient and survivable QQ strains need to be discovered. A new strain named Bacillus thuringiensis LZX01 was isolated in this study using a low carbon source concentration "starving" method from a membrane bioreactor (MBR). LZX01 secreted intracellular lactonase to enable QQ behavior and was capable of degrading 90 % of C8-HSL (200 ng/mL) within 30 min, which effectively delayed biofouling by inhibiting the growth of bacteria associated with biofouling and improving the hydrophilicity of bound extracellular polymeric substances. As a result, the membrane biofouling rate of MBR adding LZX01 was four times slower than that of the control MBR. Importantly, LZX01 maintains its QQ activity even in environments contaminated with typical toxic pollutants. Therefore, with high efficiency, toxicity resistance, and easy culture, LZX01 holds great potential and significant promise for biofouling control applications.

Preparation and properties of phase-change materials with enhanced radial thermal conductivities based on anisotropic graphene aerogels.

In this study, anisotropic graphene aerogels are prepared using the heat-flow method. Then, graphene aerogels with nanosilver particles are prepared via a silver mirror reaction. The aerogels are soaked in paraffin wax and the effects on the properties of the wax are investigated. The thermal conductivity of pure paraffin wax is 0.2553 W m-1 K-1. For the prepared PCM, the aerogel content was 0.92 vol%; this increases to 1.2234 W m-1 K-1, which corresponds to a thermal conductivity enhancement efficiency of 582%. The axial thermal conductivity is 1.4953 W m-1 K-1, which corresponds to a thermal conductivity enhancement efficiency of 746%. The graphene aerogels with the nanosilver particles show high phase-change efficiency. Owing to the significant improvements in the axial and thermal conductivities, the radial and axial heat transfer properties show good consistency suitable for practical applications.

RNA-Seq profiling of circular RNAs in mice with lipopolysaccharide-induced acute lung injury.

Acute lung injury (ALI) is a serious illness that develops suddenly, progresses rapidly, has a poor treatment response and a high mortality rate. Studies have found that circular RNAs (circRNA) play a critical role in several diseases, but their role in ALI remains unclear. The aim of this study was to identify circRNAs that are associated with ALI and investigate their potential molecular mechanisms. A comparison of lung circRNA and microRNA expression profiles in mice with ALI and controls was performed by RNA-sequencing. A bioinformatic analysis was conducted to identify differentially expressed (DE) RNAs, to construct competitive endogenous RNA (ceRNA) networks, and to analyze their function and pathways. Then, a protein-protein interaction (PPI) network was generated by the Search Tool for the Retrieval of Interacting Genes database, and hub genes were identified using Cytoscape. Furthermore, a key ceRNA subnetwork was constructed based on these hub genes. Overall, we found 239 DE circRNAs and 42 DE microRNAs in ALI mice compared to controls. Additionally, the molecular mechanism of ALI was further understood by building ceRNA networks based on these DE genes. ALI-induced circRNAs are mostly function in the inflammatory response and metabolic processes. Moreover, DE circRNAs are primarily involved in the nuclear factor (NF)-kappa B and PI3K-Akt signaling pathways. Seven hub genes were derived from the PPI network of 191 genes, followed by the construction of circRNA-miRNA-hub gene subnetworks. In this study, circRNA profiles are remarkably changed in mice with LPS-triggered ALI, and their potential contribution to the disease is revealed.

Bioinspired thermadapt shape-memory polymer with light-induced reversible fluorescence for rewritable 2D/3D-encoding information carriers.

Fluorescent materials have attracted widespread attention for information encryption owing to their stimuli-responsive color-shifting. However, the 2D encoding of fluorescent images poses a risk of information leakage. Herein, inspired by the mimic octopus capable of camouflage by changing colors and shapes, we develop a thermadapt shape-memory fluorescent film (TSFF) for integrating 2D/3D encoding in one system. The TSFF is based on anthracene group with reversible photo-cross-linking and poly (ethylene-co-vinyl acetate) network with thermadapt shape-memory properties. The reversible photo-cross-linking of anthracene is accompanied by repeatable fluorescence-shifting and enables rewritable 2D encoding. Meanwhile, the thermadapt shape-memory properties not only enables the reconfiguration of the permanent shape for creating and erasing 3D patterns, i.e., rewritable 3D information, but also facilitates recoverable shape programming for 3D encoding. This rewritable 2D/3D encoding strategy can enhance information security because only designated inspectors can decode the information by providing sequential heating for shape recovery and UV exposure. Overall, TSFF capable of rewritable 2D/3D encoding will inspire the design of smart materials for high-security information carriers.

Effect of a digital assessment system for the preclinical tooth preparation of metal-ceramic crowns: A pilot study.

STATEMENT OF PROBLEM: Tooth preparation is a fundamental aspect of prosthodontics and serves as a focal point in preclinical courses. Conventional pedagogy relies heavily on the expertise of instructors, whereas digital technology has the potential to offer instantaneous feedback. The efficacy of a digital assessment system in comparison with traditional teaching methods remains uncertain. PURPOSE: The purpose of this study was to compare the training effects of traditional assessment and digital evaluation on tooth preparations for the metal-ceramic crowns performed by preclinical students on the convergence angle and tooth reduction. MATERIAL AND METHODS: A total of 40 predoctoral students were randomly divided into the digital group and the traditional group to complete tooth preparation for a metal-ceramic crown on a left mandibular first molar. Students in the traditional group were taught by an experienced instructor, while the digital group students were trained by an objective digital assessment system without instructor guidance. Each student completed the tooth preparation in 20 min, received feedback according to the respective training methods, and later prepared another tooth. In this way, all students completed 4 tooth preparations in 2 weeks. All preparations were evaluated by an optical scanner. Parameters for comparing the digital group with the traditional group were the convergence angle and reduction at different stages. Questionnaires on the digital training system were answered by the students of the digital group. The t tests or Wilcoxon signed rank tests and chi-squared tests were used to analyze the differences between the 2 groups (α=.01). RESULTS: A decreasing trend in convergence angle was seen in both groups, but the 2 groups were statistically similar (P>.01). After training, a decreasing trend was seen in under-reduction and overreduction on 5 surfaces in the digital group. Conversely, in the traditional group, a noteworthy increase was seen in under-reduction on the distal surface (P=.002). Nevertheless, no significant difference was found between the 2 groups (P>.01). According to the results of the questionnaire, over 80% of the students had a positive attitude toward the digital assessment system, and more than 80% of the students expressed their interest in the digital assessment system for tooth preparation training. CONCLUSIONS: Traditional teaching and digital feedback provided similar training effects to improve the quality of tooth preparations for preclinical dental students.

Solid-state, reagent-free and one-step laser-induced synthesis of graphene-supported metal nanocomposites from metal leaves and application to glucose sensing.

The laser-induced method to prepare three-dimensional (3D) porous graphene has been widely used in many fields owing to its low-cost, easy operation, maskless patterning and ease of mass production. Metal nanoparticles are further introduced on the surface of 3D graphene to enhance its property. The existing methods, however, such as laser irradiation and electrodeposition of metal precursor solution, suffer from many shortcomings, including complicated procedure of metal precursor solution preparation, strict experimental control, and poor adhesion of metal nanoparticles. Herein, a solid-state, reagent-free, and one-step laser-induced strategy has been developed for the fabrication of metal nanoparticle modified-3D porous graphene nanocomposites. Commercial transfer metal leaves were covered on a polyimide film followed by direct laser irradiation to produce 3D graphene nanocomposites modified with metal nanoparticles. The proposed method is versatile and applicable to incorporate various metal nanoparticles including gold silver, platinum, palladium, and copper. Furthermore, the 3D graphene nanocomposites modified with AuAg alloy nanoparticles were successfully synthesized in both 21 Karat (K) and 18K gold leaves. Its electrochemical characterization demonstrated that the synthesized 3D graphene-AuAg alloy nanocomposites exhibited excellent electrocatalytic properties. Finally, we fabricated LIG-AuAg alloy nanocomposites as enzyme-free flexible sensors for glucose detection. The LIG-18K electrodes exhibited the superior glucose sensitivity of 1194 µA mM-1 cm-2 and low detection limits of 0.21 µM. The LIG-21K nanocomposite sensors showed two linear ranges from 1 µM to 1 mM and 2 mM-20 mM with good sensitivity. Furthermore, the flexible glucose sensor showed good stability, sensitivity, and ability to sense in blood plasma samples. The proposed one-step fabrication of reagent-free and metal alloy nanoparticles on LIG with excellent electrochemical performance opens up possibilities for diversifying potential applications of sensing, water treatment and electrocatalysis.

Recent advances on microplastic aging: Identification, mechanism, influence factors, and additives release.

Microplastics pollution has attracted worldwide attention in recent years due to their wide distribution and severe threat to biota. Additionally, microplastics will undergo serious aging effects after being discarded into the environment. Aging can change surface properties and affect the environmental behavior of microplastics. However, information on the aging process and influencing factors of microplastics are still limited. This review summarized recently reported characterization methods, and aging means of microplastics. Subsequently, the corresponding aging mechanisms (abrasion, chemical oxidation, light irradiation, and biodegradation) and the intervention mechanism of environmental factors are revealed, which is helpful to understand the environmental aging processes and ecological risks of microplastics. Besides, to further comprehend the potential environmental toxicity of microplastics, the article also outlined the release of additives during aging. This paper provides reference directions for further study on aging microplastics through a systematic review. Future research works should further facilitate the development of technologies to identify aged microplastics. And more attention needs to focus on narrowing the gap between laboratory aging simulation and the natural environment, thereby enhancing research authenticity and environmental relevance.

Multi-factor correlation analysis of the effect of root-promoting practices on tobacco rhizosphere microecology in growth stages.

Some agronomic practices not only promote the development of crop roots and increase overall plant performance but also affect colonisation by rhizosphere microorganisms. However, the composition and temporal dynamics of the tobacco rhizosphere microbiota under different root-promoting practices are poorly understood. Here, we characterised the tobacco rhizosphere microbiota at the knee-high, vigorous growing, and maturity stages under the application of potassium fulvic acid (PFA), γ-Polyglutamic acid (PGA), soymilk root irrigation (SRI), and conventional fertilization (CK) and its correlation with root characteristics and soil nutrients. The results showed that three root-promoting practices notably improved the dry and fresh root weights. Total nitrogen and phosphorus, available phosphorus and potassium, and organic matter contents in the rhizosphere markedly increased at the vigorous growing stage. The rhizosphere microbiota was changed through root-promoting practices. However, with tobacco growth, the change of rhizosphere microbiota showed a pattern of slow first and then fast and the microbiota of different treatments gradually approached. SRI reduced plant-pathogenic fungi but increased chemoheterotrophic and phototrophic bacteria, and arbuscular mycorrhizal fungi. PFA and PGA markedly increased arbuscular mycorrhizal and ectomycorrhizal fungi at the knee-high stage, which benefitted tobacco nutrient absorption. The correlation between rhizosphere microorganisms and environmental factors varied at different growth stages. Notably, the rhizosphere microbiota was more sensitive to environmental factors at the vigorous growing stage, and the interactions were more complex than in other stages. Furthermore, a variance partitioning analysis showed that the influence of root-soil interaction on the rhizosphere microbiota increased with tobacco growth. Overall, all three root-promoting practices could improve root characteristics, rhizosphere nutrient, and rhizosphere microbiota to varying degrees and increase the tobacco biomass, among which PGA had the most obvious effect and most suitable for tobacco cultivation. Our findings revealed the role of root-promoting practices in shaping the rhizosphere microbiota during plant growth and elucidated the assembly patterns and environmental drivers of crop rhizosphere microbiota driven by the application of root-promoting practices in agricultural production.

Enhancing quorum quenching media with 3D robust electrospinning coating: A novel biofouling control strategy for membrane bioreactors.

Bacterial quorum quenching (QQ) is an effective strategy for controlling biofouling in membrane bioreactor (MBR) by interfering the releasing and degradation of signal molecules during quorum sensing (QS) process. However, due to the framework feature of QQ media, the maintenance of QQ activity and the restriction of mass transfer threshold, it has been difficult to design a more stable and better performing structure in a long period of time. In this research, electrospun fiber coated hydrogel QQ beads (QQ-ECHB) were fabricated by using electrospun nanofiber coated hydrogel to strengthen layers of QQ carriers for the first time. The robust porous PVDF 3D nanofiber membrane was coated on the surface of millimeter-scale QQ hydrogel beads. Biocompatible hydrogel entrapping quorum quenching bacteria (sp.BH4) was employed as the core of the QQ-ECHB. In MBR with the addition of QQ-ECHB, the time to reach transmembrane pressure (TMP) of 40 kPa was 4 times longer than conventional MBR. The robust coating and porous microstructure of QQ-ECHB contributed to keeping a lasting QQ activity and stable physical washing effect at a very low dosage (10g beads/5L MBR). Physical stability and environmental-tolerance tests also verified that the carrier can maintain the structural strength and keep the core bacteria stable when suffering long-term cyclic compression and great fluctuations in sewage quality.

Assessing long-term climate change impact on spatiotemporal changes of groundwater level using autoregressive-based and ensemble machine learning models.

To evaluate the long-term climate change impacts on groundwater fluctuations of the Ardabil plain, Iran, a groundwater level (GWL) modeling was proposed in this study. Accordingly, the outputs of Global Climate Models (GCMs) under the sixth report of Coupled Model Intercomparison Project (CMIP6) and future scenario of the Shared Socioeconomic Pathway 5-8.5 (SSP5-8.5), were used as climate change forcing to the Machine learning (ML) models. The GCM data were first downscaled and projected for the future via Artificial Neural Networks (ANNs). Based on the results, compared to 2014 (the last year of the base period), the mean annual temperature may increase by 0.8 °C per decade until 2100. On the other hand, the mean precipitation may decrease by about 8% compared to the base period. Then, the centroid wells of clusters were modeled by Feedforward Neural Network (FFNN), examining different input combination sets to simulate both autoregressive and non-autoregressive models. Since each of the ML models can extract different kinds of information from a dataset, after finding the dominant input set via FFNN, GWL time series were modeled via various ML methods. The modeling results indicated that the ensemble of shallow ML models could lead to a 6% more accurate outcome than the individual shallow ML models, and 4% than the deep learning models. Also, the simulation results for future GWLs illustrated that temperature can impact groundwater oscillations directly, whereas precipitation may not have uniform impacts on the GWLs. The uncertainty evolving in the modeling process was quantified and observed to be in acceptable range. Modeling results showed that the main reason for the declining GWL in the Ardabil plain could be primarily linked to the excessive exploitation of the water table, while climate change impact could be also notable.

Impact of microplastics on lead-contaminated riverine sediments: Based on the enzyme activities, DOM fractions, and bacterial community structure.

Microplastics (MPs) are able to interact with diverse contaminants in sediments. However, the impacts of MPs on sediment properties and bacterial community structure in heavy metal-contaminated sediments remain unclear. In this study, we investigated the adsorption of Pb(II) by sediment-MPs mixtures and the effects of different concentration MPs on sediment enzyme activities, DOM fractions, and Pb bioavailability in riverine sediments, and further explored the response of sediment microbial community to Pb in the presence of MPs. The results indicated that the addition of MPs significantly decreased the adsorption amount of Pb(II) by sediments, especially decreased by 12.6% at 10% MPs treatment. Besides, the changes in enzyme activities, DOM fractions exhibited dose-dependent effects of MPs. The higher level of MPs (5% and 10%) tends to transform Pb into more bioavailable fractions in sediments. Also, MPs amendment was observed to alter sediment bacterial community structures, and community differences were evident in the uncontaminated and lead-contaminated sediments. Therein, significant increase of Bacteroidota, Proteobacteria and decrease of Firmicutes abundance in Pb-contaminated sediment at the phylum level were observed. These findings are expected to provide comprehensive information for assessing the combined ecological risks of heavy metals and MPs in riverine sediments.