Ice crystal guided folding of graphene oxides in a confined space: a facile approach to 1D functional graphene structures.

The controlled conformational changes of planar graphene nanosheets are of great importance to the realization of their practical applications. Despite substantial effort in the area, the controlled folding of two-dimensional (2D) graphene sheets into one-dimensional (1D) structures still remains a significant challenge. Here, for the first time, we report an ice crystal guided folding strategy to fabricate 1D folded graphene nanobelts (FGBs), where the formation and growth of ice crystals in a confined space function to guide the folding of 2D graphene oxide (GO) nanosheets into 1D nanobelts (i.e. folded graphene oxide belts, FGOBs), which were subsequently converted to FGBs after annealing. Thin aqueous GO containing films were obtained by blowing air through a GO dispersion in the presence of a surfactant, polyoxypropylenediamine (D400), resulting in a foam containing uniform air bubbles. Subsequent shock cooling of the foam using liquid nitrogen resulted in the facile fabrication of FGOBs. This technique provides a general approach to encapsulate catalytic nanomaterials such as Fe3O4 nanorods, TiO2 and Co3O4 nanoparticles into the folded graphene structure for practical applications such as Li-ion batteries.

Suitability of Marine- and Porcine-Derived Collagen Type I Hydrogels for Bioprinting and Tissue Engineering Scaffolds.

Collagens from a wide array of animals have been explored for use in tissue engineering in an effort to replicate the native extracellular environment of the body. Marine-derived biomaterials offer promise over their conventional mammalian counterparts due to lower risk of disease transfer as well as being compatible with more religious and ethical groups within society. Here, collagen type I derived from a marine source (Macruronus novaezelandiae, Blue Grenadier) is compared with the more established porcine collagen type I and its potential in tissue engineering examined. Both collagens were methacrylated, to allow for UV crosslinking during extrusion 3D printing. The materials were shown to be highly cytocompatible with L929 fibroblasts. The mechanical properties of the marine-derived collagen were generally lower than those of the porcine-derived collagen; however, the Young's modulus for both collagens was shown to be tunable over a wide range. The marine-derived collagen was seen to be a potential biomaterial in tissue engineering; however, this may be limited due to its lower thermal stability at which point it degrades to gelatin.

3D-printed heterogeneous Cu2O monoliths: Reusable supports for Antibiotic Treatmentantibiotic treatment of wastewater.

In this study, surfactant stabilized dispersions of the Cu2O microparticles in a commercially available photocurable resin were 3D printed into both porous and non-porous monoliths, and the heterogeneous Cu2O catalytic monolith with improved mass transfer characteristics was applied for antibiotic wastewater treatment. The physicochemical properties of catalytic monoliths were characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and thermogravimetric. Ten intermediates were analyzed and identified by GC-MS, and the corresponding degradation pathways were proposed. Both numerical simulation and degradation experiments were used to explore the mass transfer mechanism and catalytic performance of the monoliths. The results showed that the 3D-printed monolith with a well-defined porous network exhibited a high ofloxacin degradation efficiency (100%) based on the sulfate radical-based advanced oxidation processes. In addition, the catalytic monolith showed sustained high activity over 7 reusable cycles demonstrating its feasibility in removal of antibiotics from wastewater.

Variation in Hydrogel Formation and Network Structure for Telo-, Atelo- and Methacrylated Collagens.

As the most abundant protein in the extracellular matrix, collagen has become widely studied in the fields of tissue engineering and regenerative medicine. Of the various collagen types, collagen type I is the most commonly utilised in laboratory studies. In tissues, collagen type I forms into fibrils that provide an extended fibrillar network. In tissue engineering and regenerative medicine, little emphasis has been placed on the nature of the network that is formed. Various factors could affect the network structure, including the method used to extract collagen from native tissue, since this may remove the telopeptides, and the nature and extent of any chemical modifications and crosslinking moieties. The structure of any fibril network affects cellular proliferation and differentiation, as well as the overall modulus of hydrogels. In this study, the network-forming properties of two distinct forms of collagen (telo- and atelo-collagen) and their methacrylated derivatives were compared. The presence of the telopeptides facilitated fibril formation in the unmodified samples, but this benefit was substantially reduced by subsequent methacrylation, leading to a loss in the native self-assembly potential. Furthermore, the impact of the methacrylation of the collagen, which enables rapid crosslinking and makes it suitable for use in 3D printing, was investigated. The crosslinking of the methacrylated samples (both telo- and atelo-) was seen to improve the fibril-like network compared to the non-crosslinked samples. This contrasted with the samples of methacrylated gelatin, which showed little, if any, fibrillar or ordered network structure, regardless of whether they were crosslinked.

Shaping collagen for engineering hard tissues: Towards a printomics approach.

Hard tissue engineering has evolved over the past decades, with multiple approaches being explored and developed. Despite the rapid development and success of advanced 3D cell culture, 3D printing technologies and material developments, a gold standard approach to engineering and regenerating hard tissue substitutes such as bone, dentin and cementum, has not yet been realised. One such strategy that differs from conventional regenerative medicine approach of other tissues, is the in vitro mineralisation of collagen templates in the absence of cells. Collagen is the most abundant protein within the human body and forms the basis of all hard tissues. Once mineralised, collagen provides important support and protection to humans, for example in the case of bone tissue. Multiple in vitro fabrication strategies and mineralisation approaches have been developed and their success in facilitating mineral deposition on collagen to achieve bone-like scaffolds evaluated. Critical to the success of such fabrication and biomineralisation approaches is the collagen template, and its chemical composition, organisation, and density. The key factors that influence such properties are the collagen processing and fabrication techniques utilised to create the template, and the mineralisation strategy employed to deposit mineral on and throughout the templates. However, despite its importance, relatively little attention has been placed on these two critical factors. Here, we critically examine the processing, fabrication and mineralisation strategies that have been used to mineralise collagen templates, and offer insights and perspectives on the most promising strategies for creating mineralised collagen scaffolds. STATEMENT OF SIGNIFICANCE: In this review, we highlight the critical need to fabricate collagen templates with advanced processing techniques, in a manner that achieves biomimicry of the hierarchical collagen structure, prior to utilising in vitro mineralisation strategies. To this end, we focus on the initial collagen that is selected, the extraction techniques used and the native fibril forming potential retained to create reconstituted collagen scaffolds. This review synthesises current best practises in material sourcing, processing, mineralisation strategies and fabrication techniques, and offers insights into how these can best be exploited in future studies to successfully mineralise collagen templates.

Copolymerization of Pentafluorophenylmethacrylate with Hydrophilic Methacrylamide Monomers Induces Premature Hydrolytic Cleavage.

Active ester polymers are commonly used for fast development of novel polymer libraries, but they require post-polymerization modification, which is not atom-efficient or economical. In order to more efficiently produce 2-hydroxypropyl methacrylamide (HPMAm) libraries, it would be advantageous to perform a direct copolymerization with active ester monomers. In this work, the synthesis of copolymer libraries of pentafluorophenyl methacrylate (PFPMA) and the hydrophilic monomer HPMAm is investigated. Surprisingly, HPMAm induces premature hydrolytic cleavage of PFPMA, which occurs during polymerization and depends on the HPMAm/PFPMA feed ratio. Copolymerization of PFPMA with N-isopropylmethacrylamide and the methacrylate monomers 2-hydroxypropylmethacrylate and N-isopropylmethacrylate reveals that the hydrolytic cleavage is promoted by copolymerization with methacrylamides only. By switching from a thermal- to a light-based initiator and lowering the reaction temperature, premature hydrolytic cleavage of PFPMA is avoided and allows direct copolymerization of HPMAm together with PFPMA to create polymer libraries for biomaterial screening.

Gelatin-Based Photocurable Hydrogels for Corneal Wound Repair.

In this study, an injectable, photocurable gelatin system, consisting of acrylated gelatin and thiolated gelatin, with tunable mechanical, biodegradation, and biological properties was used as a potential cell-supportive scaffold for the repair of focal corneal wounds. The mechanical property of hydrogels can be readily modified (postcure shear modulus of between 0.3 and 22 kPa) by varying the ratio of acrylate to thiol groups, photointensity, and solid content, and the biodegradation times also varied with the change of solid content. More importantly, the generated hydrogels exhibited excellent cell viability in both cell seeding and cell encapsulation experiments. Furthermore, the hydrogels were found to be biocompatible with rabbit cornea and aided the regeneration of a new tissue under a focal corneal wound (exhibiting epithelial wound coverage in <3d), and ultraviolet irradiation did not have any obvious harmful effect on the cornea and posterior eye segment tissues. Along with their injectability and tunable mechanical properties, the photocurable thiol-acrylate hydrogels showed promise as corneal substitutes or substrates to construct a new corneal tissue.

Silicone Microemulsion Structures Are Maintained During Polymerization with Reactive Surfactants.

Bicontinuous microemulsions exhibit domain structures on the nanoscale (<20 nm). Normally, such fine details are lost during the conversion from a fluid microemulsion to solid elastomeric materials, as a consequence of interfacial destabilization via polymerization of either the oil phase or monomers in the aqueous phase. Very little is known about the polymerization of silicone microemulsions and the morphological changes that occur upon transition from a nanostructured liquid to a solid matrix. Silicone microemulsions polymerized by free radical (aqueous phase) and condensation (silicone phase) processes, respectively, were characterized by small-angle X-ray scattering and transmission electron microscopy. It was found that cross-linking of the silicone phase alone led, over time, to large increase of the size of the microemulsion nanodomains. By contrast, photoinduced polymerization of a reactive surfactant and acrylic monomers in the aqueous phase was effective at retaining bicontinuous nanomorphology, irrespective of the degree of cross-linking of the silicone phase.

Photothermal triggered protein release from an injectable polycaprolactone-based microspherical depot.

Upon exposure to visible light, controlled multiple dose protein release was demonstrated by using a microspherical depot composed of biodegradable poly(ε-caprolactone) (PCL), bovine serum albumin (BSA) or horseradish peroxidase (HRP) as model protein, polymer-coated gold nanoparticles as photothermal component, which can potentially reduce the number of invasive therapeutic injections.

Photo-Modulated Therapeutic Protein Release from a Hydrogel Depot Using Visible Light.

The use of biomacromolecular therapeutics has revolutionized disease treatment, but frequent injections are required owing to their short half-life in vivo. Thus there is a need for a drug delivery system that acts as a reservoir and releases the drug remotely "on demand". Here we demonstrate a simple light-triggered local drug delivery system through photo-thermal interactions of polymer-coated gold nanoparticles (AuNPs) inside an agarose hydrogel as therapeutic depot. Localized temperature increase induced by the visible light exposure caused reversible softening of the hydrogel matrix to release the pre-loaded therapeutics. The release profile can be adjusted by AuNPs and agarose concentrations, light intensity and exposure time. Importantly, the biological activity of the released bevacizumab was highly retained. In this study we demonstrate the potential application of this facile AuNPs/hydrogel system for ocular therapeutics delivery through its versatility to release multiple biologics, compatibility to ocular cells and spatiotemporal control using visible light.

Enhancing thermal stability and mechanical properties of lyotropic liquid crystals through incorporation of a polymerizable surfactant.

We present a facile method to prepare thermally stable and mechanically robust crosslinked lyotropic liquid crystals (LLCs) through incorporation of a polymerizable amphiphile into a binary LLC system comprising commercially available surfactant Brij 97 and water. Thermal stability and mechanical properties of the polymerized LLCs were significantly enhanced after polymerization of the incorporated polymerizable surfactant. The effect of incorporating a polymerizable amphiphile on the phase behavior of the LLC system was studied in detail. In situ photo-rheology was used to monitor the change in the mechanical properties of the LLCs, namely the storage modulus, loss modulus, and viscosity, upon polymerization. The retention of the LLC nanostructures was evaluated by small angle X-ray scattering (SAXS). The ability to control the thermal stability and mechanical strength of LLCs simply by adding a polymerizable amphiphile, without tedious organic synthesis or harsh polymerization conditions, could prove highly advantageous in the preparation of robust nanomaterials with well-defined periodic structures.

Colloidally stabilized magnetic carbon nanotubes providing MRI contrast in mouse liver tumors.

The use of medical imaging contrast agents may lead to improved patient prognosis by potentially enabling an earlier detection of diseases and therefore an earlier initiation of treatments. In this study, we fabricated superparamagnetic iron oxide (SPIO) nanoparticles within the inner cavity of multiwalled carbon nanotubes (MWCNTs) for the first time; thereby ensuring high mechanical stability of the nanoparticles. A simple, but effective, self-assembled coating with RAFT diblock copolymers ensured the SPIO-MWCNTs have a high dispersion stability under physiological conditions. In vivo acute tolerance testing in mice showed a high tolerance dose up to 100 mg kg(-1). Most importantly, after administration of the material a 55% increase in tumor to liver contrast ratio was observed with in vivo MRI measurements compared to the preinjection image enhancing the detection of the tumor.

Self-assembled gold coating enhances X-ray imaging of alginate microcapsules.

Therapeutic biomolecules produced from cells encapsulated within alginate microcapsules (MCs) offer a potential treatment for a number of diseases. However the fate of such MCs once implanted into the body is difficult to establish. Labelling the MCs with medical imaging contrast agents may aid their detection and give researchers the ability to track them over time thus aiding the development of such cellular therapies. Here we report the preparation of MCs with a self-assembled gold nanoparticle (AuNPs) coating which results in distinctive contrast and enables them to be readily identified using a conventional small animal X-ray micro-CT scanner. Cationic Reversible Addition-Fragmentation chain Transfer (RAFT) homopolymer modified AuNPs (PAuNPs) were coated onto the surface of negatively charged alginate MCs resulting in hybrids which possessed low cytotoxicity and high mechanical stability in vitro. As a result of their high localized Au concentration, the hybrid MCs exhibited a distinctive bright circular ring even with a low X-ray dose and rapid scanning in post-mortem imaging experiments facilitating their positive identification and potentially enabling them to be used for in vivo tracking experiments over multiple time-points.

From nanodroplets by the ouzo effect to interfacial nanolenses.

Polymerizing nanodroplets at solid-liquid interfaces is a facile solution-based approach to the functionalization of large surface areas with polymeric lens-shaped nanostructures. In this work, we have applied a one-pot approach to obtain polymeric nanolenses with controlled sizes and densities. We take advantage of the formation mechanism by the direct adsorption of nanodroplets from a surfactant-free microemulsion onto an immersed hydrophobic substrate. The interfacial nanodroplets were photopolymerized to produce polymeric nanolenses on the substrate surface. The surfactant-free microemulsion of the monomer nanodroplets was obtained through the spontaneous emulsification (i.e., ouzo effect) in the tertiary system of ethanol, water, and precusor monomer. The size of nanolenses on the surface was adjusted by the nanodroplet size, following a linear relationship with the ratio of the components in the microemulsion. This simple approach is applicable to produce nanolenses over the entire surface area or on any specific area at will by depositing a drop of the microemulsion. Possessing high optical transparency, the resulting substrates may have potential application as functional biomedical supporting materials or effective light-harvesting coatings.

A simple way to track single gold-loaded alginate microcapsules using x-ray CT in small animal longitudinal studies.

The use of alginate based microcapsules to deliver drugs and cells with a minimal host interaction is increasingly being proposed. A proficient method to track the position of the microcapsules during such therapies, particularly if they are amenable to commonly used instrumentation, would greatly help the development of such treatments. Here we propose to label the microcapsules with gold nanoparticles to provide a bright contrast on small animal x-ray micro-CT systems enabling single microcapsule detection. The microcapsules preparation is based on a simple protocol using inexpensive compounds. This, combined with the widespread availability of micro-CT apparatus, renders our method more accessible compared with other methods. Our labeled microcapsules showed good mechanical stability and low cytotoxicity in-vitro. Our post-mortem rodent model data strongly suggest that the high signal intensity generated by the labeled microcapsules permits the use of a reduced radiation dose yielding a method fully compatible with longitudinal in-vivo studies. FROM THE CLINICAL EDITOR: The authors of this study report the development of a micro-CT based tracking method of alginate-based microcapsules by incorporating gold nanoparticles in the microcapsules. They demonstrate the feasibility of this system in rodent models, where due to the high signal intensity, even reduced radiation dose is sufficient to track these particles, providing a simple and effective method to track these commonly used microcapsules and allowing longitudinal studies.

Multistimuli responsive organogels based on a reactive azobenzene gelator.

A reactive azobenzene based super organogelator was found to rapidly and reversibly transform a range of hydrophobic solvents from gels to solutions upon changes in temperature, light and shear force. More specifically they formed gels at concentrations as low as 0.08 wt%. Upon heating, exposure to UV light, or application of shear, the π-π bonding was disrupted which resulted in a rapid drop of both modulus and viscosity. This was confirmed by (1)H NMR, SAXS, and rheological measurements. Although many examples of organogelators are known in the literature, this is the first time that a reactive group, a benzoyl chloride, has been incorporated in a supramolecular organogel structure. Moreover, this group is available for subsequent synthetic modifications. The presence of benzoyl chloride groups showed a remarkable effect on the formation and properties of the gels. Compared with other approaches, this strategy is advantageous in terms of structural design since it not only produces a multi-responsive soft material but also allows facile modifications which may expand the applications of organogels to other fields.

The effect of silicone hydrogel contact lens composition on dexamethasone release.

The relationship between the delivery of dexamethasone and the composition of silicone hydrogel materials was investigated. Two hydrophilic monomers (2-hydroxyethyl methacrylate or N,N-dimethylacrylamide), a siloxy methacrylate-based monomer (1-(Bis(trimethylsiloxy)methylsilyl)propoxy-3-metacryloxy-2-propanol, a polysiloxane (monomethacryloxypropyl-terminated polydimethylsiloxane) and a polymerizable silicone surfactant (Silmer ACR A008-UP) were used to synthesize silicone hydrogels of variable composition. The materials properties, such as surface wettability and equilibrium water content, were highly dependent on polymer composition. All dexamethasone-loaded hydrogels showed uptake that was driven primarily by sorption to the polymer phase. Furthermore, a positive correlation between loading mass and equilibrium water content was established. The duration of drug release from the hydrogels ranged from one to greater than two weeks depending on the monomer composition and relative contribution of hydrophilic and hydrophobic monomers. Higuchi model rate constants for the release showed strong correlation with the equilibrium water content, signifying that the release is likely controlled by aqueous phase diffusion.

Water-dispersible magnetic carbon nanotubes as T2-weighted MRI contrast agents.

An efficient MRI T2-weighted contrast agent incorporating a potential liver targeting functionality was synthesized via the combination of superparamagnetic iron oxide (SPIO) nanoparticles with multiwalled carbon nanotubes (MWCNTs). Poly(diallyldimethylammonium chloride) (PDDA) was coated on the surface of acid treated MWCNTs via electrostatic interactions and SPIO nanoparticles modified with a potential targeting agent, lactose-glycine adduct (Lac-Gly), were subsequently immobilized on the surface of the PDDA-MWCNTs. A narrow magnetic hysteresis loop indicated that the product displayed superparamagnetism at room temperature which was further confirmed by ZFC (zero field cooling)/FC (field cooling) curves measured by SQUID. The multifunctional MWCNT-based magnetic nanocomposites showed low cytotoxicity in vitro to HEK293 and Huh7 cell lines. Enhanced T2 relaxivities were observed for the hybrid material (186 mM(-1) s(-1)) in comparison with the pure magnetic nanoparticles (92 mM(-1) s(-1)) due to the capacity of the MWCNTs to "carry" more nanoparticles as clusters. More importantly, after administration of the composite material to an in vivo liver cancer model in mice, a significant increase in tumor to liver contrast ratio (277%) was observed in T2 weighted magnetic resonance images.

Reversible photorheological lyotropic liquid crystals.

We describe novel lyotropic liquid-crystalline (LLC) materials based on photoresponsive amphiphiles that exhibit rapid photoswitchable rheological properties of unprecedented magnitude between solidlike and liquidlike states. This was achieved through the synthesis of a novel azobenzene-containing surfactant (azo-surfactant) that actuates the transition between different LLC forms depending on illumination conditions. Initially, the azo-surfactant/water mixtures formed highly ordered and viscous LLC phases at 20-55 wt % water content. Spectroscopic, microscopic, and rheological analysis confirmed that UV irradiation induced the trans to cis isomerization of the azo-surfactant, leading to the disruption of the ordered LLC phases and a dramatic, rapid decrease in the viscosity and modulus resulting in a 3 orders of magnitude change from a solid (20,000 Pa) to a liquid (50 Pa) at rate of 13,500 Pa/s. Subsequent exposure to visible light reverses the transition, returning the viscosity essentially to its initial state. Such large, rapid, and reversible changes in rheological properties within this LLC system may open a door to new applications for photorheological fluids.

Influence of polymer elasticity on the formation of non-cracking honeycomb films.

Non-planar non-cracking honeycomb (HC) structures are prepared from star polymers with high glass transition temperatures (T(g) ) and relatively low Young's moduli (E). This study demonstrates that the Young's modulus of a polymer is a more important factor than the glass transition temperature for determining the occurrence of cracking during HC film formation on non-planar surfaces.