Ultrashort pulse written fiber Bragg gratings as narrowband filters in multicore fibers.

We present the inscription of narrow-linewidth fiber Bragg gratings (FBGs) into different types of multicore fibers (MCFs) using ultrashort laser pulses and the phase mask technique, which can act as notch filters. Such filters are required, e.g., to suppress light emitted by hydroxyl in the Earth's upper atmosphere, which disturbs ground-based observation of extraterrestrial objects in the near infrared. However, the inscription into a commercially available seven-core fiber showed a quite large core-to-core deviation of the resonance wavelength of up to 0.45 nm. Two options are presented to overcome this: first, we present the photo-treatment of the FBGs to tune the resonance wavelength, which allows for sufficient resonance shifts. Second, adapted MCFs containing 12 cores, arranged on a circle, are fabricated. For this, two different fabrication procedures were investigated, namely, the mechanical drilling of the preform for a rod-in-tube version as well as a stack-and-draw approach. Both adapted MCFs yielded significant improvements with core-to-core wavelength variations of the FBGs of only about 0.18 nm and 0.11 nm, respectively, sufficient to fulfill the requirements for astronomical filter applications as discussed above.

Coherently combined 16-channel multicore fiber laser system.

We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled-aperture beam splitting and combination, together with temporal phasing, is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses is achieved with combination efficiencies around 80%.

Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier.

We investigate the average power scaling of two diode-pumped Yb-doped fiber amplifiers emitting a diffraction-limited beam. The first fiber under investigation with a core diameter of 30 µm was able to amplify a 10 W narrow linewidth seed laser up to 2.8 kW average output power before the onset of transverse mode instabilities (TMI). A further power scaling was achieved using a second fiber with a smaller core size (23µm), which allowed for a narrow linewidth output power of 3.5 kW limited by stimulated Brillouin scattering (SBS). We mitigated SBS using a spectral broadening mechanism, which allowed us to further increase the output power to 4.3 kW only limited by the available pump power. Up to this power level, a high slope efficiency of 90% with diffraction-limited beam quality and without any sign of TMI or stimulated Raman scattering for a spectral dynamic range of higher than -80 dB was obtained.

Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier.

We report on a newly designed and fabricated ytterbium-doped large mode area fiber with an extremely low NA (~0.04) and related systematic investigations on fiber parameters that crucially influence the mode instability threshold. The fiber is used to demonstrate a narrow linewidth, continuous wave, single mode fiber laser amplifier emitting a maximum output power of 3 kW at a wavelength of 1070 nm without reaching the mode-instability threshold. A high slope efficiency of 90 %, excellent beam quality, high temporal stability, and an ASE suppression of 70 dB could be reached with a signal linewidth of only 170 pm.