Comparison of three imaging techniques for assessing endodontic working length.

The accuracy of endodontic working length estimation was investigated using three imaging techniques: radiography (Rd), Xeroradiography (Xr) and Radiovisiography (RVG positive and negative prints). An in-vitro model of extracted single straight roots, mounted in wooden blocks with wax, was employed in the study. Optimum exposures were established for each of the imaging techniques. The magnification of the images was measured and the resolution of the RVG images was also investigated. Comparable Rd (D-speed film), Xr,RVG positive and RVG negative images were made of five roots with size 10 files in situ. Images of 10 standard files were made, ranging from 2.0 mm through the root apex to 2.5 mm short of the apex, resulting in 200 images. Six observers each assessed the working distance on 100 images, measuring the distance from the apical foramen to the file tip. After allowing for the magnification of the images, these results were compared with the 'true' file tip to apical foramen (measured with the aid of a reflex microscope). The inaccuracy of working distance estimations was considered to be of clinical significance (> 0.5 mm) in 6% of measurements made from Rd and Xr, 19.2% of measurements from RVG negative and 32.3% from RVG positive images. In addition, 14% of RVG images were too poorly defined to be assessed. The first-generation RVG system was used in this study. It was therefore concluded that the most accurate estimates of working distance were made from Xr and Rd images, and that RVG images, particularly the RVG positive images, were the least accurate and most difficult to read.(ABSTRACT TRUNCATED AT 250 WORDS)