Mild selective photochemical oxidation of an organic sulfide using OxP-polyimide porous polymers as singlet oxygen generators.

A series of porous organic polymers based on a singlet oxygen generating oxoporphyinogen ('OxP') has been successfully prepared from a pseudotetrahedral OxP-tetraamine precursor (OxP(4-NH2Bn)4) by its reaction with tetracarboxylic acid dianhydrides under suitable conditions. Of the compounds studied, those containing naphthalene (OxP-N) and perylene (OxP-P) spacers, respectively, have large surface areas (~530 m2 g-1). On the other hand, the derivative with a simple benzene spacer (OxP-B) exhibits the best 1O2 generating capability. Although the starting OxP-tetraamine precursor is a poor 1O2 generator, its incorporation into OxP POPs leads to a significant enhancement of 1O2 productivity, which is largely due to the transformation of NH2 groups to electron-withdrawing diimides. Overall 1O2 production efficacy of OxP-POPs under irradiation by visible light is significantly improved over the common reference material PCN-222. All the materials OxP-B, OxP-N and OxP-P promote oxidation of thioanisole involving conversion of ambient triplet state oxygen to singlet oxygen under visible light irradiation and its reaction with the sulfide. Although the reaction rate of the oxidation promoted by OxP POPs is generally lower than for conventional materials (such as PCN-222) or previously studied OxP derivatives, undesired overoxidation of the substrate to methyl phenyl sulfone is suppressed. For organic sulfides, selectivity of oxidation is especially important for detoxification of mustard gas (bis(2-chloroethyl)sulfide) or similarly toxic compounds since controlled oxidation leads to the low toxicity bis(2-chloroethyl)sulfoxide while overoxidation leads to intoxification (since bis(2-chloroethyl)sulfone presents greater toxicity to humans than the sulfide substrate). Therefore, OxP POPs capable of promoting selective oxidation of sulfides to sulfoxides have excellent potential to be used as mild and selective detoxification agents.

Oxoporphyrinogen (OxP) is a unique chromophore compound in that it is intrinsically de-aggregated allowing large quantum yields of singlet oxygen generation. Due to its structure, OxP is also an ideal building block for porous systems. In this work, we describe the first incorporation of OxP in highly stable microporous polymers strongly enhanced singlet oxygen generation for selective oxidation of organic sulfides to sulfoxides (as a model reaction) under heterogeneous conditions. The novelty of this work lies in the high stability and easy recovery of the materials, the synergetic enhancement of singlet oxygen generation in the polymers over the starting OxP, and the excellent selectivity for the oxidation reaction.

Linker-Functionalized Phosphinate Metal-Organic Frameworks: Adsorbents for the Removal of Emerging Pollutants.

Metal-organic frameworks (MOFs) are attracting increasing attention as adsorbents of contaminants of emerging concern that are difficult to remove by conventional processes. This paper examines how functional groups covering the pore walls of phosphinate-based MOFs affect the adsorption of specific pharmaceutical pollutants (diclofenac, cephalexin, and sulfamethoxazole) and their hydrolytic stability. New structures, isoreticular to the phosphinate MOF ICR-7, are presented. The phenyl ring facing the pore wall of the presented MOFs is modified with dimethylamino groups (ICR-8) and ethyl carboxylate groups (ICR-14). These functionalized MOFs were obtained from two newly synthesized phosphinate linkers containing the respective functional groups. The presence of additional functional groups resulted in higher affinity toward the tested pollutants compared to ICR-7 or activated carbon. However, this modification also comes with a reduced adsorption capacity. Importantly, the introduction of the functional groups enhanced the hydrolytic stability of the MOFs.

Direct Phenylation of nido-B10H14.

As a preliminary step toward its condensation into the porous polymer Activated Borane, the thermolysis of nido-B10H14 (1) in benzene at 200 °C results in the generation of a number of phenylated borane molecular species. The principal product is the new monophenylated compound 5-Ph-nido-B10H13 (2), isolated in 48% yield (based on consumption of 1) and structurally characterized by single-crystal X-ray diffraction analysis, NMR, and mass spectrometry along with other minor products, such as 6-Ph-nido-B10H13 (3), for which we observe UV-light-driven conversion into 2 via a "vertex-flip" mechanism, and novel diphenylated 5,8-Ph2-nido-B10H12 (4). Together, the phenylated derivatives provide a valuable insight into the assembly of Activated Borane and ultimately inform on its structure. The new compounds also display strong blue fluorescence in both solid-state and in solution and are the first examples of the direct phenylation of nido-B10H14, thus opening the door to the straight-forward synthesis of highly luminescent organic-borane hybrid systems.

Phosphinate MOFs Formed from Tetratopic Ligands as Proton-Conductive Materials.

Metal-organic frameworks (MOFs) are attracting attention as potential proton conductors. There are two main advantages of MOFs in this application: the possibility of rational design and tuning of the properties and clear conduction pathways given by their crystalline structure. We hereby present two new MOF structures, ICR-10 and ICR-11, based on tetratopic phosphinate ligands. The structures of both MOFs were determined by 3D electron diffraction. They both crystallize in the P3̅ space group and contain arrays of parallel linear pores lined with hydrophilic noncoordinated phosphinate groups. This, together with the adsorbed water molecules, facilitates proton transfer via the Grotthuss mechanism, leading to a proton conductivity of up to 4.26 × 10-4 S cm-1 for ICR-11. The presented study demonstrates the high potential of phosphinate MOFs for the fabrication of proton conductors.

Photosensitizer Encryption with Aggregation Enhanced Singlet Oxygen Production.

Chromophores that generate singlet oxygen (1O2) in water are essential to developing noninvasive disease treatments using photodynamic therapy (PDT). A facile approach for formation of stable colloidal nanoparticles of 1O2 photosensitizers, which exhibit aggregation enhanced 1O2 generation in water toward applications as PDT agents, is reported. Chromophore encryption within a fuchsonarene macrocyclic scaffold insulates the photosensitizer from aggregation induced deactivation pathways, enabling a higher chromophore density than typical 1O2 generating nanoparticles. Aggregation enhanced 1O2 generation in water is observed, and variation in molecular structure allows for regulation of the physical properties of the nanoparticles which ultimately affects the 1O2 generation. In vitro activity and the ability of the particles to pass through the cell membrane into the cytoplasm is demonstrated using confocal fluorescence microscopy with HeLa cells. Photosensitizer encryption in rigid macrocycles, such as fuchsonarenes, offers new prospects for the production of biocompatible nanoarchitectures for applications involving 1O2 generation.

Nonionic omnisoluble photosensitizer reference material for the estimation of singlet oxygen quantum yield.

Meso-Tetrakis-(3,4,5-tris{2-[2-(2-methoxyethoxy)ethoxy]ethoxy}phenyl)porphyrin TEG12PH2 is reported as an 'omnisoluble' reference for singlet oxygen (1O2) generation quantum yield (ΦSO) estimation. TEG12PH2 is a highly soluble, nonionic compound possessing excellent 1O2 QY in a wide variety of common solvents, including water. TEG12PH2 was prepared on multigram scale by the 12-way O-alkylation of tetrakis(3,4,5-trihydroxyphenyl)porphyrin using 2-(2-(2-methoxyethoxy)ethoxy)ethyl 4-toluenesulfonate as a reaction solvent. The corresponding Zn(II) complex TEG12PZn was also prepared and studied. The 1O2 QYs of TEG12PH2 in the different solvents studied were found to be 0.86 (acetone), 0.59 (acetonitrile), 0.66 (chloroform), 0.85 (methanol), 0.45 (toluene) and 0.51 (water). TEG12PH2 can be considered a reliable and easy to implement omnisoluble reference compound for the estimation of the 1O2 generating activities of new materials, especially new porphyrinic compounds.

Item Analysis of the Czech Version of the WJ IV COG Battery from a Group of Romani Children.

The objective of the article is to present an item analysis of selected subtests of the Czech version of the WJ IV COG battery from a group of Romani children, ages 7-11. The research sample consisted of 400 school-aged Romani children from the Czech Republic who were selected by quota sampling. A partial comparative sample for the analysis was the Czech population collected as norms of the Czech edition of © Propsyco (n = 936). The Woodcock-Johnson IV COG was used as a research tool. Statistical analysis was performed in Winstep software using Differential Item Functioning; differences between groups were expressed in logits and tested via the Rasch-Welch T-test. It was discovered that higher item difficulty was noted in the verbal subtests, although variability in item difficulty was found across all subtests. The analysis of individual items makes it possible to discover which tasks are most culturally influenced.

Robust Aluminum and Iron Phosphinate Metal-Organic Frameworks for Efficient Removal of Bisphenol A.

Porous metal-organic frameworks (MOFs) have excellent characteristics for the adsorptive removal of environmental pollutants. Herein, we introduce a new series of highly stable MOFs constructed using Fe3+ and Al3+ metal ions and bisphosphinate linkers. The isoreticular design leads to ICR-2, ICR-6, and ICR-7 MOFs with a honeycomb arrangement of linear pores, surface areas up to 1360 m2 g-1, and high solvothermal stabilities. In most cases, their sorption capacity is retained even after 24 h of reflux in water. The choice of the linkers allows for fine-tuning of the pore sizes and the chemical nature of the pores. This feature can be utilized for the optimization of host-guest interactions between molecules and the pore walls. Water pollution by various endocrine disrupting chemicals has been considered a global threat to public health. In this work, we prove that the chemical stability and hydrophobic nature of the synthesized series of MOFs result in the remarkable sorption properties of these materials for endocrine disruptor bisphenol A.

Phosphinate Apical Ligands: A Route to a Water-Stable Octahedral Molybdenum Cluster Complex.

Recent studies have unraveled the potential of octahedral molybdenum cluster complexes (Mo6) as relevant red phosphors and photosensitizers of singlet oxygen, O2(1Δg), for photobiological applications. However, these complexes tend to hydrolyze in an aqueous environment, which deteriorates their properties and limits their applications. To address this issue, we show that phenylphosphinates are extraordinary apical ligands for the construction of Mo6 complexes. These new complexes display unmatched luminescence quantum yields and singlet oxygen production in aqueous solutions. More importantly, the complex with diphenylphosphinate ligands is the only stable complex of these types in aqueous media. These complexes internalize in lysosomes of HeLa cells, have no dark toxicity, and yet are phototoxic in the submicromolar concentration range. The superior hydrolytic stability of the diphenylphosphinate complex allows for conservation of its photophysical properties and biological activity over a long period, making it a promising compound for photobiological applications.

The nanoscaled metal-organic framework ICR-2 as a carrier of porphyrins for photodynamic therapy.

Nanosized porphyrin-containing metal-organic frameworks (MOFs) attract considerable attention as solid-state photosensitizers for biological applications. In this study, we have for the first time synthesised and characterised phosphinate-based MOF nanoparticles, nanoICR-2 (Inorganic Chemistry Rez). We demonstrate that nanoICR-2 can be decorated with anionic 5,10,15,20-tetrakis(4-R-phosphinatophenyl)porphyrins (R = methyl, isopropyl, phenyl) by utilizing unsaturated metal sites on the nanoparticle surface. The use of these porphyrins allows for superior loading of the nanoparticles when compared with commonly used 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin. The nanoICR-2/porphyrin composites retain part of the free porphyrins photophysical properties, while the photodynamic efficacy is strongly affected by the R substituent at the porphyrin phosphinate groups. Thus, phosphinatophenylporphyrin with phenyl substituents has the strongest photodynamic efficacy due to the most efficient cellular uptake.

Phosphinatophenylporphyrins tailored for high photodynamic efficacy.

The development of effective photosensitizers is particularly attractive for photodynamic therapy of cancer. Three novel porphyrin photosensitizers functionalized with phosphinic groups were synthesized and their physicochemical, photophysical, and photobiological properties were collected. Phosphinic acid groups (R1R2POOH) attached to the porphyrin moiety (R1) contain different R2 substituents (methyl, isopropyl, phenyl in this study). The presence of phosphinic groups does not influence absorption and photophysical properties of the porphyrin units, including the O2(1Δg) productivity. In vitro studies show that these porphyrins accumulate in cancer cells, are inherently nontoxic, however, exhibit high phototoxicity upon irradiation with visible light with their phototoxic efficacy tuned by R2 substituents on the phosphorus centre. Thus, phosphinatophenylporphyrin with isopropyl substituents has the strongest photodynamic efficacy due to the most efficient cellular uptake. We demonstrate that these porphyrins are attractive candidates for photodynamic applications since their photodynamic efficacy can be easily tuned by the R2 substituent.

Outerly functionalized and non-functionalized boron clusters intercalated into layered hydroxides with different modes of binding: materials for superacid storage.

Two binary boron hydrides (NH4)2B10H10 and Na2B12H12 and mono- and dicarboxy p- and m-carboranes (namely, 1-(COOH)-closo-1,7-C2B10H11, 1,12-(COOH)2-closo-1,12-C2B10H10 and 1,7-(COOH)2-closo-1,7-C2B10H10) were intercalated into ZnAl-layered double hydroxides (ZnAl-LDH) and into Zn5(OH)8(NO3)2·2H2O. The formed compounds were characterized using elemental analysis, thermogravimetry analysis, X-ray powder diffraction, infrared spectroscopy and solid state NMR. All the intercalated boron compounds are present in the interlayer space of the layered hosts as anions. It is presumed that in the case of B10H102-, B12H122- and 1,12-(COO)2-closo-1,12-C2B10H102-, the guest molecules form a monolayer, whereas in the case of 1-(COO)-closo-1,7-C2B10H111- and 1,7-(COO)2-closo-1,7-C2B10H102- a bilayer arrangement is more probable. In the case of 1,7-(COO)2-closo-1,7-C2B10H102-, the guest molecules are strongly interdigitated resulting in lowering of the interlayer distance. Two different modes of binding were found. Whereas the carboxylate derivatives of p- and m-carboranes are bonded through classical hydrogen bonds, the corresponding parent borane anions interact with the host structures by mainly dihydrogen bonding. In effect, both kinds of hydrogen bonding are mainly of an electrostatic nature. The dihydrogen bond is detected, e.g. in crystal engineering, and represents a driving force for interactions of boranes with biomolecules. Since the latter dicarboxylic acids were found to be superacids, their interactions with the host structures should be stronger than in the case of the benzoic and terephthalic acid intercalates.

Designing Porphyrinic Covalent Organic Frameworks for the Photodynamic Inactivation of Bacteria.

Microbial colonization of biomedical devices is a recognized complication contributing to healthcare-associated infections. One of the possible approaches to prevent surfaces from the biofilm formation is antimicrobial photodynamic inactivation based on the cytotoxic effect of singlet oxygen, O2(1Δg), a short-lived, highly oxidative species, produced by energy transfer between excited photosensitizers and molecular oxygen. We synthesized porphyrin-based covalent organic frameworks (COFs) by Schiff-base chemistry. These novel COFs have a three-dimensional, diamond-like structure. The detailed analysis of their photophysical and photochemical properties shows that the COFs effectively produce O2(1Δg) under visible light irradiation, and especially three-dimensional structures have strong antibacterial effects toward Pseudomonas aeruginosa and Enterococcus faecalis biofilms. The COFs exhibit high photostability and broad spectral efficiency. Hence, the porphyrinic COFs are suitable candidates for the design of antibacterial coating for indoor applications.

Phosphinic Acid Based Linkers: Building Blocks in Metal-Organic Framework Chemistry.

Metal-organic frameworks (MOFs) are a chemically and topologically diverse family of materials composed of inorganic nodes and organic linkers bound together by coordination bonds. Presented here are two significant innovations in this field. The first is the use of a new coordination group, phenylene-1,4-bis(methylphosphinic acid) (PBPA), a phosphinic acid analogue of the commonly used terephtalic acid. Use of this new linker group leads to the formation of a hydrothermally stable and permanently porous MOF structure. The second innovation is the application of electron-diffraction tomography, coupled with dynamic refinement of the EDT data, to the elucidation of the structure of the new material, including the localization of hydrogen atoms.

High photocatalytic activity of transparent films composed of ZnO nanosheets.

Nanometric thin films were prepared by dip-coating and inkjet printing ZnO nanosheets on glass plates. The side-by-side alignment of the ZnO nanosheets on the substrate resulted in thin, transparent, oriented ZnO surfaces with the high-energy {001} facets exposed. The method of nanosheet deposition affected the film morphology; the dip-coated films were very smooth and nonporous, while the inkjet-printed films were rough and porous with the estimated void volume approximately 60-70% of the total film volume. The first-order rate constants for the photocatalytic degradation of 4-chlorophenol on the nanosheet-based films were approximately 2 times larger than those on nanocolumnar ZnO films or ZnO films prepared by the sol-gel technique. We attribute the high photocatalytic activity of the ZnO nanosheets to the fact that their {001} facets were predominantly exposed to the oxidized substrate. This surface arrangement and the simplicity of fabricating the ZnO nanosheet-based films make them promising for the construction of optical devices and dye-sensitized solar cells.