ABSTRACT
With the escalating demand for Radio Frequency Identification (RFID) technology and the Internet of Things (IoT), there is a growing need for sustainable and autonomous power solutions to energize low-powered devices. Consequently, there is a critical imperative to mitigate dependency on batteries during passive operation. This paper proposes the conceptual framework of rectenna architecture-based radio frequency energy harvesters' performance, specifically optimized for low-power device applications. The proposed prototype utilizes the surroundings' Wi-Fi signals within the 2.4 GHz frequency band. The design integrates a seven-stage Cockroft-Walton rectifier featuring a Schottky diode HSMS286C and MA4E2054B1-1146T, a low-pass filter, and a fractal antenna. Preliminary simulations conducted using Advanced Design System (ADS) reveal that a voltage of 3.53 V can be harvested by employing a 1.57 mm thickness Rogers 5880 printed circuit board (PCB) substrate with an MA4E2054B1-1146T rectifier prototype, given a minimum power input of -10 dBm (0.1 mW). Integrating the fabricated rectifier and fractal antenna successfully yields a 1.5 V DC output from Wi-Fi signals, demonstrable by illuminating a red LED. These findings underscore the viability of deploying a fractal antenna-based radio frequency (RF) harvester for empowering small electronic devices.
ABSTRACT
Wireless technology is becoming increasingly critical in industrial environments in recent years, and the popular wireless standards are WirelessHART, ZigBee, WLAN and ISA100.11a, commonly used in closed-loop systems. However, wireless networks in closed-loop control experience packet loss or drops, system delay and data threats, leading to process instability and catastrophic system failure. To prevent such issues, it is necessary to implement dead-time compensation control. Traditional techniques like model predictive and predictive PI controllers are frequently employed. However, these methods' performance is sluggish in wireless networks, with processes having long dead times and set-point variations, potentially affecting network and process performance. Therefore, this paper proposes a fractional calculus-based predictive PI compensator for wired and wireless networks in the process control industries. The proposed technique has been simulated and evaluated on industrial process models, including pressure, flow, and temperature, where measurement and control are carried out wirelessly. The wireless network's performance has been evaluated based on packet loss, reduced throughput, and increased system latency. The proposed compensator outperformed traditional methods, demonstrating superior set-point tracking, disturbance rejection, and delay compensation characteristics in the performance evaluations of the first, second, and third-order systems. Overall, the findings indicate that the proposed compensator enhances wireless networks' performance in the process control industry and improves system stability and reliability by reducing almost half of the overshoot and settling an average of 8.3927% faster than the conventional techniques in most of the systems.
ABSTRACT
A novel hybrid Harris Hawk-Arithmetic Optimization Algorithm (HHAOA) for optimizing the Industrial Wireless Mesh Networks (WMNs) and real-time pressure process control was proposed in this research article. The proposed algorithm uses inspiration from Harris Hawk Optimization and the Arithmetic Optimization Algorithm to improve position relocation problems, premature convergence, and the poor accuracy the existing techniques face. The HHAOA algorithm was evaluated on various benchmark functions and compared with other optimization algorithms, namely Arithmetic Optimization Algorithm, Moth Flame Optimization, Sine Cosine Algorithm, Grey Wolf Optimization, and Harris Hawk Optimization. The proposed algorithm was also applied to a real-world industrial wireless mesh network simulation and experimentation on the real-time pressure process control system. All the results demonstrate that the HHAOA algorithm outperforms different algorithms regarding mean, standard deviation, convergence speed, accuracy, and robustness and improves client router connectivity and network congestion with a 31.7% reduction in Wireless Mesh Network routers. In the real-time pressure process, the HHAOA optimized Fractional-order Predictive PI (FOPPI) Controller produced a robust and smoother control signal leading to minimal peak overshoot and an average of a 53.244% faster settling. Based on the results, the algorithm enhanced the efficiency and reliability of industrial wireless networks and real-time pressure process control systems, which are critical for industrial automation and control applications.
Subject(s)
Algorithms , Computer Communication Networks , Reproducibility of Results , Wireless TechnologyABSTRACT
Dry-Low Emission (DLE) technology significantly reduces the emissions from the gas turbine process by implementing the principle of lean pre-mixed combustion. The pre-mix ensures low nitrogen oxides (NOx) and carbon monoxide (CO) production by operating at a particular range using a tight control strategy. However, sudden disturbances and improper load planning may lead to frequent tripping due to frequency deviation and combustion instability. Therefore, this paper proposed a semi-supervised technique to predict the suitable operating range as a tripping prevention strategy and a guide for efficient load planning. The prediction technique is developed by hybridizing Extreme Gradient Boosting and K-Means algorithm using actual plant data. Based on the result, the proposed model can predict the combustion temperature, nitrogen oxides, and carbon monoxide concentration with an accuracy represented by R squared value of 0.9999, 0.9309, and 0.7109, which outperforms other algorithms such as decision tree, linear regression, support vector machine, and multilayer perceptron. Further, the model can identify DLE gas turbine operation regions and determine the optimum range the turbine can safely operate while maintaining lower emission production. The typical DLE gas turbine's operating range can operate safely is found at 744.68 °C -829.64 °C. The proposed technique can be used as a preventive maintenance strategy in many applications involving tight operating range control in mitigating tripping issues. Furthermore, the findings significantly contribute to power generation fields for better control strategies to ensure the reliable operation of DLE gas turbines.
ABSTRACT
The gas sweetening process removes hydrogen sulfide (H2S) in an acid gas removal unit (AGRU) to meet the gas sales' specification, known as sweet gas. Monitoring the concentration of H2S in sweet gas is crucial to avoid operational and environmental issues. This study shows the capability of artificial neural networks (ANN) to predict the concentration of H2S in sweet gas. The concentration of N-methyldiethanolamine (MDEA) and Piperazine (PZ), temperature and pressure as inputs, and the concentration of H2S in sweet gas as outputs have been used to create the ANN network. Two distinct backpropagation techniques with various transfer functions and numbers of neurons were used to train the ANN models. Multiple linear regression (MLR) was used to compare the outcomes of the ANN models. The models' performance was assessed using the mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The findings demonstrate that ANN trained by the Levenberg-Marquardt technique, equipped with a logistic sigmoid (logsig) transfer function with three neurons achieved the highest R2 (0.966) and the lowest MAE (0.066) and RMSE (0.122) values. The findings suggested that ANN can be a reliable and accurate prediction method in predicting the concentration of H2S in sweet gas.
Subject(s)
Hydrogen Sulfide , Neural Networks, Computer , Solvents , Linear Models , GasesABSTRACT
Achieving reliable power efficiency from a high voltage induction motor (HVIM) is a great challenge, as the rigorous control strategy is susceptible to unexpected failure. External cooling is commonly used in an HVIM cooling system, and it is a vital part of the motor that is responsible for keeping the motor at the proper operating temperature. A malfunctioning cooling system component can cause motor overheating, which can destroy the motor and cause the entire plant to shut down. As a result, creating a dynamic model of the motor cooling system for quality performance, failure diagnosis, and prediction is critical. However, the external motor cooling system design in HVIM is limited and separately done in the past. With this issue in mind, this paper proposes a combined modeling approach to the HVIM cooling system which consists of integrating the electrical, thermal, and cooler model using the mathematical model for thermal performance improvement. Firstly, the development of an electrical model using an established mathematical model. Subsequently, the development of a thermal model using combined mathematical and linear regression models to produce motor temperature. Then, a modified cooler model is developed to provide cold air temperature for cooling monitoring. All validated models are integrated into a single model called the HVIM cooling system as the actual setup of the HVIM. Ultimately, the core of this modeling approach is integrating all models to accurately represent the actual signals of the motor cooler temperature. Then, the actual signals are used to validate the whole structure of the model using Mean Absolute Percentage Error (MAPE) and Root Mean Square Error (RMSE) analysis. The results demonstrate the high accuracy of the HVIM cooling system representation with less than 1% error tolerance based on the industrial plant experts. Thus, it will be helpful for future utilization in quality maintenance, fault identification and prediction study.
Subject(s)
Cold Temperature , Electricity , Linear Models , Temperature , Phase TransitionABSTRACT
A smart grid is a modern electricity system enabling a bidirectional flow of communication that works on the notion of demand response. The stability prediction of the smart grid becomes necessary to make it more reliable and improve the efficiency and consistency of the electrical supply. Due to sensor or system failures, missing input data can often occur. It is worth noting that there has been no work conducted to predict the missing input variables in the past. Thus, this paper aims to develop an enhanced forecasting model to predict smart grid stability using neural networks to handle the missing data. Four case studies with missing input data are conducted. The missing data is predicted for each case, and then a model is prepared to predict the stability. The Levenberg-Marquardt algorithm is used to train all the models and the transfer functions used are tansig and purelin in the hidden and output layers, respectively. The model's performance is evaluated on a four-node star network and is measured in terms of the MSE and R2 values. The four stability prediction models demonstrate good performances and depict the best training and prediction ability.
Subject(s)
Algorithms , Neural Networks, Computer , Computer SystemsABSTRACT
Saybolt color is a standard measurement scale used to determine the quality of petroleum products and the appropriate refinement process. However, the current color measurement methods are mostly laboratory-based, thereby consuming much time and being costly. Hence, we designed an automated model based on an artificial neural network to predict Saybolt color. The network has been built with five input variables, density, kinematic viscosity, sulfur content, cetane index, and total acid number; and one output, i.e., Saybolt color. Two backpropagation algorithms with different transfer functions and neurons number were tested. Mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2) were used to assess the performance of the developed model. Additionally, the results of the ANN model are compared with the multiple linear regression (MLR). The results demonstrate that the ANN with the Levenberg-Marquart algorithm, tangent sigmoid transfer function, and three neurons achieved the highest performance (R2 = 0.995, MAE = 1.000, and RMSE = 1.658) in predicting the Saybolt color. The ANN model appeared to be superior to MLR (R2 = 0.830). Hence, this shows the potential of the ANN model as an effective method with which to predict Saybolt color in real time.
Subject(s)
Neural Networks, Computer , Petroleum , Algorithms , Linear Models , NeuronsABSTRACT
This paper proposes a novel hybrid arithmetic-trigonometric optimization algorithm (ATOA) using different trigonometric functions for complex and continuously evolving real-time problems. The proposed algorithm adopts different trigonometric functions, namely sin, cos, and tan, with the conventional sine cosine algorithm (SCA) and arithmetic optimization algorithm (AOA) to improve the convergence rate and optimal search area in the exploration and exploitation phases. The proposed algorithm is simulated with 33 distinct optimization test problems consisting of multiple dimensions to showcase the effectiveness of ATOA. Furthermore, the different variants of the ATOA optimization technique are used to obtain the controller parameters for the real-time pressure process plant to investigate its performance. The obtained results have shown a remarkable performance improvement compared with the existing algorithms.
Subject(s)
AlgorithmsABSTRACT
Industrialization has led to a huge demand for a network control system to monitor and control multi-loop processes with high effectiveness. Due to these advancements, new industrial wireless sensor network (IWSN) standards such as ZigBee, WirelessHART, ISA 100.11a wireless, and Wireless network for Industrial Automation-Process Automation (WIA-PA) have begun to emerge based on their wired conventional structure with additional developments. This advancement improved flexibility, scalability, needed fewer cables, reduced the network installation and commissioning time, increased productivity, and reduced maintenance costs compared to wired networks. On the other hand, using IWSNs for process control comes with the critical challenge of handling stochastic network delays, packet drop, and external noises which are capable of degrading the controller performance. Thus, this paper presents a detailed study focusing only on the adoption of WirelessHART in simulations and real-time applications for industrial process monitoring and control with its crucial challenges and design requirements.
Subject(s)
Computer Communication Networks , Wireless Technology , Automation , IndustryABSTRACT
The emergence of wireless technologies such as WirelessHART and ISA100 Wireless for deployment at industrial process plants has urged the need for research and development in wireless control. This is in view of the fact that the recent application is mainly in monitoring domain due to lack of confidence in control aspect. WirelessHART has an edge over its counterpart as it is based on the successful Wired HART protocol with over 30 million devices as of 2009. Recent works on control have primarily focused on maintaining the traditional PID control structure which is proven not adequate for the wireless environment. In contrast, Internal Model Control (IMC), a promising technique for delay compensation, disturbance rejection and setpoint tracking has not been investigated in the context of WirelessHART. Therefore, this paper discusses the control design using IMC approach with a focus on wireless processes. The simulation and experimental results using real-time WirelessHART hardware-in-the-loop simulator (WH-HILS) indicate that the proposed approach is more robust to delay variation of the network than the PID.