Mechanical Properties of 3D Printed Orthodontic Retainers.

Orthodontic retention is the final important stage of orthodontic treatment, the aim of which is to consolidate the functional and aesthetic position of teeth. Among adults, fixed retainers made of different types of wires are the most common. The aim of this study was to analyse the mechanical properties of a new generation of fixed orthodontic retainers-printed by 3D printers. MATERIALS AND METHODS: The study was conducted using samples made of Nextdent MFH C&B N1 resin in the form of cuboid bars with nominal dimensions of width b = 3 mm, thickness d = 0.8 mm; 1 mm; 1.2 mm, length l = 30 mm for each type. The influence of the thickness of the retainers on their strength under loaded conditions was evaluated. Flexural strength, elastic properties, deflection, and creep were compared. The samples were aged in an artificial saliva bath at 37 ± 1 °C during the strength tests. RESULTS: It was shown that differences in the thickness of the samples affected their elastic and strength properties. The highest average flexural modulus, the highest deflection, creep, and strength was characteristic of the samples with the highest thickness (1.2 mm). Samples with an average thickness of 1 mm had the lowest modulus of elasticity. CONCLUSIONS: The mechanical properties of 3D printed retainers show that they can be an alternative to metal retainers and the procedure of making new retainers, especially when patients have aesthetic requirements or allergies to metals.

The effect of the RadioProtect cosmetic formulation on the skin of oncological patients treated with selected cytostatic drugs and ionizing radiation.

Introduction: According to the Polish Central Statistical Office and the National Cancer Registry, cancer is the main cause of death in the world. Every year over 8 million people die from cancer worldwide, while in Poland the disease kills nearly 100,000 people. The group of patients analysed in this study suffered from breast, colorectal and lung cancers, and underwent radio- and chemotherapy. The patients were treated with a cosmetic formulation to accelerate the healing of their skin and improve the functioning of the hydrolipidic barrier. Aim: To examine oncological patients' skin and to improve its biophysical parameters with a specialized cosmetic preparation. Material and methods: The study was conducted on 60 female cancer patients treated at the University Hospital in Zielona Gora, Poland. The patients volunteered for in vivo tests of the cosmetic formulation. Results: The emulsions applied to the patients undergoing chemotherapy significantly increased the hydration of their epidermis. After 4 months of regular use of the preparation, their skin hydration level increased by 22%. The skin hydration of the patients undergoing radiotherapy increased by 3%, as compared with the levels at the beginning of the study. Conclusions: Cosmetic formulations for oncological patients restore the adequate level of skin hydration, aid the reconstruction of the skin and its protective barrier, soothe irritations, accelerate the healing of pathological lesions and prevent their development. Adverse effects may delay or prevent further treatment. Therefore, appropriately tailored care is very important and should not be overlooked.

The Use of Natural Collagen Obtained from Fish Waste in Hair Styling and Care.

Chemically speaking, polymers are multi-molecular compounds that have specific physicochemical properties. Hair cosmetics utilize their ability to create a protective film and make the cosmetic formulation more viscous, which facilitates its application. Natural polymers are encountered in nature, but, in hair cosmetics, artificially modified ones are more often used. Unfortunately, artificially modified polymers are characterized by high resistance to biological factors, which creates an ecological problem. Another reason for a search for natural polymers is their milder action when compared to synthetic ones. One of the new sources of obtaining collagen is the waste connective tissue materials of aquatic animals-skins, spines, dorsal chords and scales, and swim bladders. These raw materials are most often disposed of in landfills, processed into fish meal, or destined for food for animals. The conducted research was aimed at proving the action of natural collagen in hair cosmetics as a substitute for synthetic polymers. In the patients using collagen laminate, it is possible to notice the complete elimination of excessive sebum production, restoration of the correct pH value, and reduction in skin inflammations.

Effect of Artificial Aging on Mechanical and Tribological Properties of CAD/CAM Composite Materials Used in Dentistry.

With easy-to-process 3D printing materials and fast production, the quality of dental services can be improved. In the conventional procedure, the dentist makes temporary crowns directly in the patient's mouth, e.g., from the most commonly used bis-acrylic composites. Temporary crowns made directly in the office without the use of CAD/CAM are often of inferior quality, which directly results in impaired hygiene, poorer masticatory mechanics, greater deposition of plaque, calculus and sediment, and may adversely affect periodontal and gum health. The mechanical strength, resistance to aging and abrasion of 3D printing materials are higher than those of the soft materials used in conventional methods. This translates into durability. The patient leaves the surgery with a restoration of higher utility quality compared to the conventional method. The objective of the paper was to determine the influence of aging in artificial saliva of AM (additive manufacturing) orthodontic composites on their functional properties. For the purpose of the study, fillings well-known worldwide were selected. These were traditional UV-curable resins (M I, M II, M III, M V) and a hybrid material based on a UV-curable resin (M VI). Samples were stored in artificial saliva at 37 ± 1 °C in a thermal chamber for 6 months. Indentation hardness, frictional tests and sliding wear measurements were conducted. A comparison between various materials was made. Descriptive statistics, degradation coefficients, H2E, Archard wear and specific wear rate were calculated. The Weibull statistical test for indentation hardness was performed and Hertzian contact stresses for the frictional association were calculated for unaged (M I, M II, M III, M V, M VI) and aged (M I AS, M II AS, M III AS, M V AS, M VI AS) samples. M I exhibited the lowest average hardness among the unaged materials, while M III AS had the lowest average hardness among the aged materials. Comparably low hardness was demonstrated by the M I AS material. The coefficient of friction values for the aged samples were found to be higher. The lowest wear value was demonstrated by the M I material. The wear resistance of most of the tested materials deteriorated after aging. The M VI AS material had the highest increase in wear. According to the results provided, not only the chemical composition and structure, but also aging have a great impact on the indentation hardness and wear resistance of the tested orthodontic materials.

In vivo studies of resveratrol contained in cosmetic emulsions.

The cosmetic and pharmaceutical industry is constantly on the lookout for new and efficient active substances. In this article, we focus on resveratrol, an active substance with beneficial health properties, which is obtained, among others, from vines and knotweed (Reynoutria japonica). In this study, we assessed the level of skin hydration in a group of probands who used cream with or without resveratrol. The compound has been shown to have moisturizing and tightening properties, improving the overall condition of the skin.

Studies on stability of emulsions containing carotenoids.

Emulsions are commonly used to improve aesthetics but they may also be applied to deliver active ingredients. Recently, a group of pigments known as carotenoids has been added to emulsions as an active compound mainly due to their antioxidant properties. The stability of these formulations is a critical parameter for both, pharmaceutical and cosmetics industry. Therefore, in this study two analytical methods, multiple light scattering and laser diffraction, were tested to determine the stability of various emulsions containing carotenoids (ß-carotene, lycopene, astaxanthin). Even small changes in stability of emulsions were determined very early. The results of both methods proved that the type of carotenoid used did not influence the emulsions' stability. The stability of emulsions depends mainly on the preparation methods and on the type of emulsifier applied.

In vivo studies of substances used in the cosmetic industry.

Cosmetic producers are obliged to guarantee the safety and stability of their products. The current legal regulations are based on the European Union Directive (1223/2009) of 30 November 2009. The main aim of the directive is to formulate criteria of safety of a cosmetic product and requirements that it must meet to be placed on the market. A new cosmetic product is subjected to thorough investigation prior to its introduction on the market. It should be studied not only with respect to its safety, but also with respect to its effectiveness declared by the producer. The studies are performed in vivo, by the contact or epidermal patch tests on the human skin.

[Carotenoids as natural antioxidants]. / Karotenoidy jako naturalne antyoksydanty.

Human organisms have many defence mechanisms able to neutralise the harmful effects of the reactive species of oxygen. Antioxidants play an important role in reducing the oxidative damage to the human organism. Carotenoids are among the strongest antioxidants. They have 11 coupled double bonds, so they can be classified as polyisoprenoids, show low polarity and can occur in acyclic, monocyclic or bicyclic forms. The carotenoids of the strongest antioxidant properties are lycopene, lutein, astaxanthin and ß-carotene. Carotenoids with strong antioxidant properties have found wide application in medical, pharmaceutical and cosmetic industries. These compounds are highly active against both reactive oxygen species and free radicals. Comparing ß-carotene, astaxanthin and lycopene with other antioxidants (e.g. vitamin C and E), it can be concluded that these compounds have higher antioxidant activity, e.g. against singlet oxygen. Astaxanthin is a stronger antioxidant compared to ß-carotene, vitamin E and vitamin C, respectively 54, 14 and 65 times. Carotenoids have a salutary effect on our body, making it more resistant and strong to fight chronic diseases. The purpose of this article is to review the literature concerning free radicals and their adverse effects on the human body and carotenoids, as strong, natural antioxidants.