Polystyrene nanoplastics affect the human ubiquitin structure and ubiquitination in cells: a high-resolution study.

Humans are estimated to consume several grams per week of nanoplastics (NPs) through exposure to a variety of contamination sources. Nonetheless, the effects of these polymeric particles on living systems are still mostly unknown. Here, by means of CD, NMR and TEM analyses, we describe at an atomic resolution the interaction of ubiquitin with polystyrene NPs (PS-NPs), showing how a hard protein corona is formed. Moreover, we report that in human HeLa cells exposure to PS-NPs leads to a sensible reduction of ubiquitination. Our study overall indicates that PS-NPs cause significant structural effects on ubiquitin, thereby influencing one of the key metabolic processes at the base of cell viability.

Conformational analysis by NMR and distance geometry techniques of a peptide mimetic of the third helix of the Antennapedia homeodomain.

The Antennapedia homeodomain structure consists of four helices. The helices II and III are connected by a tripeptide that forms a turn, and constitute the well-known helix-turn-helix motif. The recognition helix penetrates the DNA major groove, gives specific protein-DNA contacts and forms direct, or water-mediated, intermolecular hydrogen bonds. It was suggested that helix III (and perhaps also helix IV) might represent the recognition helix of Antennapedia homeodomain, which makes contact with the surface of the major groove of the DNA. In an attempt to clarify the helix III capabilities of assuming an helical conformation when separated from the rest of the protein, we carried out the structural determination of the recognition helix III in different solvent media. The conformational study of fragments 42-53, where residues W48 and F49, not involved in the protein-DNA interaction, were substituted by two alanines, was conducted in sodium dodecyl sulfate (SDS), trifluoroethanol (TFE) and TFE/water, using circular dichroism, nuclear magnetic resonance (NMR) and distance geometry (DG) techniques. The fragment assumes a well-defined secondary structure in TFE and in TFE/water (90/10, v/v) with an alpha-helix encompassing residues 4-9, while in TFE/water (70/30, v/v) a less regular structure was found. The DG results in the micellar system evidence the presence of a distorted alpha-helical conformation involving residues 4-8. Our results reveal that the isolated Antennapedia recognition helix III tend to preserve in solution the alpha-helical conformation even if separated from the rest of the molecule.

Effect of lengthening of peptide backbone by insertion of chiral beta-homo amino acid residues: conformational behavior of linear peptides containing alternating L-leucine and beta-homo L-leucine residues.

The synthesis and the solution behavior of the linear peptides containing a beta-homo (beta-H) leucine residue-Boc-Leu-beta-HLeu-Leu-OMe, Boc-beta-HLeu-Leu-beta-HLeu-Leu-OMe, and Boc-Leu-beta-HLeu-Leu-beta-HLeu-Leu-OMe-as well as the solid structure of the tripeptide, are reported. The conformational behavior of the peptides was investigated in solution by two-dimensional nmr. Our data support the existence in solution with different families of conformers in rapid interchange. The crystals of the tripeptide are orthorhombic, space group P2(1)2(1)2, with a = 15.829(1) A, b = 29.659(1) A, c = 6.563(1) A, and Z = 4. The structure has been solved by direct methods and refined to final R1 and wR2 indexes of 0.0530 and 0.1436 for 2420 reflections with I > 2sigma(I). In the solid state, the tripeptide does not present intramolecular H bonds, and the peptide backbone of the two leucine residues adopts a quasi-extended conformation. For the beta-HLeu residue, the backbone conformation is specified by the torsion angles straight phi(2) = -120.9(4) degrees, mu(2) = 56.7(4) degrees, psi(3) = -133.2(4) degrees. The side chains of the three residues assume the same conformation (g(-), g(-), trans), and all peptide bonds, except the urethane group at the N-terminus, are in the trans conformation. Preliminary conformational energy calculations carried out on the Ac-NH-beta-HAla-NHMe underline that the conformations with mu angle equal to 180 degrees and 60 degrees assume lower energy with respect to the others. In addition, we found a larger conformational freedom for the psi angle with respect to the straight phi angle.

Solid state structural analysis of the cyclooctapeptide cyclo- (Pro1-Pro-Phe-Phe-Ac6c-Ile-D-Ala-Val8).

A solid state analysis of the cyclic octapeptide c(-Pro(1)-Pro-Phe-Phe-Ac(6)c-Ile-D-Ala-Val(8)-) (C8-CLA), containing the Pro-Pro-Phe-Phe sequence, followed by the bulky helicogenic C(alpha,alpha)-dialkylated 1-aminocyclohexane-1-carboxylic acid (Ac(6)c) residue and a D-Ala residue in position 7, has been carried out by x-ray diffraction. The crystals, grown from a DMSO solution, are monoclinic, space group P2(1) with a = 13.458(3) A, b = 19. 404(5) A, c = 21.508(4) A, and beta = 90.83(6) degrees, with two independent cyclic molecules in the asymmetric unit, two DMSO molecules, and three water molecules. The structure has been solved using the half and bake procedure by Sheldrick, and refined to final R1 and wR2 indices of 0.0613 and 0.1534 for 9867 reflections with I > 2sigma(I). This cyclic peptide, a deletion analogue of the naturally occurring cyclic nonapeptide cyclolinopeptide A [c(Pro-Pro-Phe-Phe-Leu-Ile-Ile-Leu-Val), CLA] has been designed to study the influence of the ring size reduction on the conformational behavior of CLA and more in general to obtain structural information on asymmetric cyclic octapeptides. The compound exhibits, in the solid state, a "banana-twisted" conformation with a cis peptide bond located between the two proline residues. Five intramolecular H bonds stabilize the structure: one type VIa beta-turn, two consecutive type III/I beta-turns, one gamma-turn, and one C(16) bend. The structure has also been compared with either the solution structure previously reported by us and obtained by nmr and computational analysis, and with solid state structural data reported in the literature on cyclic octapeptides.

Unusual conformational preferences of beta-alanine containing cyclic peptides. VII.

In the present paper we describe the synthesis, purification, and single crystal x-ray analysis of the cyclic pentapeptide cyclo-(Pro-Phe-Phe-beta-Ala-beta-Ala). This compound crystallizes in the orthorhombic space group P2I2I2I from methanol and adopts in the solid state an unusual conformation characterized by a cis beta-Ala5-Pro1 peptide bond and by an intramolecular hydrogen bond stabilizing a C11-and a C12-ring structure. The C11 structure contains the Phe3 and the beta-Ala4 at the corner position of the turn; it is the first observation of a type II beta-turn enlargement due to the insertion of an extra methylene group of the beta-alanine residue. The rest of the molecule participates in a newly characterized C12-ring structure, which incorporates a beta-Ala residue at position i of the turn.

Solvent-mediated conformational transition in beta-alanine containing cyclic peptides. VIII.

In the present paper we describe the solution nmr structural analysis and restrained molecular dynamic simulation of the cyclic pentapeptide cyclo-(Pro-Phe-Phe-beta-Ala-beta-Ala). The conformational analysis carried out in CD3CN and dimethylsulfoxide (DMSO) solutions by nmr spectroscopy was based on interproton distances derived from rotating frame nuclear Overhauser effect spectroscopy spectra and homonuclear coupling constants. A restrained molecular dynamic simulation in vacuo was also performed to build refined molecular models. The molecule is present in both solvent systems as two slowly interconverting conformers, characterized by a cis-trans isomerism around the beta-Ala5-Pro1 peptide bond. In CD3CN solution, the conformer with a ci5 peptide bond is quite similar to that observed in the solid state, while the conformer containing all trans peptide bonds is characterized by an intramolecular hydrogen bond stabilizing a C10- and a C13-ring structure. In DMSO solution, the trans isomer is partly similar to that observed in CD3CN solution while the cis isomer is different from that observed in the solid state. The effect of the solvent in stabilizing different conformations was also investigated in DMSO-CD3CN solvent mixtures.

Discovering protein secondary structures: classification and description of isolated alpha-turns.

Irregular protein secondary structures are believed to be important structural domains involved in molecular recognition processes between proteins, in interactions between peptide substrates and receptors, and in protein folding. In these respects tight turns are being studied in detail. They also represent template structures for the design of new molecules such as drugs, pesticides, or antigens. Isolated alpha-turns, not participating in alpha-helical structures, have received little attention due to the overwhelming presence of other types of tight turns in peptide and protein structures. The growing number of protein X-ray structures allowed us to undertake a systematic search into the Protein Data Bank of this uncharacterized protein secondary structure. A classification of isolated alpha-turns into different types, based on conformational similarity, is reported here. A preliminary analysis on the occurrence of some particular amino acids in certain positions of the turned structure is also presented.

Elucidation of the structure of constrained bicyclopeptides in solution by two-dimensional cross-relaxation spectroscopy: amatoxin analogues.

The evaluation of peptide structures in solution is made feasible by the combined use of two-dimensional NMR in the laboratory (NOESY) and rotating frames (ROESY), and by the use of molecular dynamics calculations. The present paper describes how both the NMR method and molecular dynamics calculations were applied to very rigid synthetic bicycle peptides that are analogues of natural amatoxins. The NMR theory, which allows the estimate of interatomic distances between interacting nuclei, is briefly discussed. The experimental data were compared with those of known solid-state structures. Three amatoxin analogues have been examined. Of these, one is biologically active (S-deoxo gamma[R] OH-Ile3-amaninamide) and its structure in the solid state has recently been worked out. The second and third analogues (S-dexo-Ile3-Ala5-amaninamide and S-deoxo-D-Ile3-amaninamide, respectively) are inactive and their solid-state structures are unknown. The data presented confirm the authors previous hypothesis that lack of biological activity of S-deoxo-Ile3-Ala5-amaninamide is due to the masking of the tryptophan ring by the methyl group of L-Ala and not to massive conformational changes of the analogue.

Bioactive peptides: conformational studies of [Tyr4] cyclolinopeptide A.

The solid state conformational analysis of [Tyr4] cyclolinopeptide A has been carried out by x-ray diffraction studies. The crystal structure of the monoclinic form, grown from a dioxane-water mixture [alpha = 9.849 (5) A, b = 20.752 (4) A, c = 16.728 (5) A, beta = 98.83 (3) degrees, space group P21, Z = 2], shows the presence of five intramolecular N-H...O = C hydrogen bonds, with formation of one C17 ring structure, one alpha-turn (C13), one inverse gamma-turn (C7), and two beta-turns (C10, one of type III and one of type I). The Pro1-Pro2 peptide unit is cis (omega = 5 degrees), all others are trans. The structure is almost superimposable with that of cyclolinopeptide A. The rms deviation for the atoms of the backbones is on the average 0.33 A.

Conformational behaviour of a cyclolinopeptide A analogue: two-dimensional NMR study of cyclo(Pro1-Pro-Phe-Phe-Ac6c-Ile-ala-Val8).

The cyclic octapeptide cyclo[-Pro1-Pro-Phe-Phe-Ac6c-Ile-ala-Val8-] [C8-Ac6c], containing the Pro1-Pro-Phe-Phe sequence, followed by a bulky helicogenic C alpha,alpha-dialkylated glycine residue Ac6c [1-aminocyclohexane-1-carboxylic acid), and a D-Ala residue at position 7 has been synthesized. This cyclic peptide is a deletion analogue of the naturally occurring cyclic nonapeptide cyclolinopeptide A (CLA). It has been designed with the aim of studying the role that the Ac6c and D-Ala residues play on the conformational behaviour of the whole molecule and their influence on the conformation of the Pro1-Pro-Phe-Phe sequence when compared with cyclolinopeptide A. C8-Ac6c has been investigated in chloroform and acetonitrile solutions by 2D NMR techniques. Only one set of sharp signals is observed in both solvents. This evidence strongly supports the hypothesis that only one conformational state exists in the chosen solvents. The interpretation of the experimental data points to the existence for C8-Ac6c of a very rigid structure stabilized by intramolecular hydrogen bonds. The measured NOE effects allow the calculation of internuclear distances, which have been used as restraints in molecular dynamic calculations. The proposed conformation of the molecule shows that the Pro-Pro-Phe segment retains the conformation observed in natural CLA both in solution and in the solid state and that the Ac6c residue indeed reinforces the ring rigidity not permitting the formation of any appropriate cavity in which inorganic cations could be complexed.

Beta-alanine containing cyclic peptides with predetermined turned structure. V.

In the present paper we describe the synthesis, purification, single crystal x-ray analysis, and solution structural characterization by nmr spectroscopy, combined with restrained molecular dynamic simulations, of the cyclic hexapeptide cyclo-(Pro-Phe-beta-Ala-Phe-Phe-beta-Ala). The peptide was synthesized by classical solution methods and the cyclization of the free hexapeptide was accomplished in good yields in diluted methylenechloride solution using N,N-dicyclohexyl-carbodiimide. The compound crystallizes in the monoclinic space group P2(1) from methanol/ethyl acetate. The molecule adopts in the solid state a conformation characterized by cis beta-Ala6-Pro1 peptide bond. The alpha-amino acid residues are at the corner positions of turned structures. The Pro1-Phe2 segment is incorporated in a pseudo type I beta-turn, while Phe4-Phe5 is in a typical type I beta-turn. Assignment of all 1H and 13C resonances was achieved by homo- and heteronuclear two-dimensional techniques in dimethylsulfoxide (DMSO) solutions. The conformational analysis was based on interproton distances derived from rotating frame nuclear Overhauser effect spectroscopy spectra and homonuclear coupling constants. Restrained molecular dynamic simulation in vacuo was also performed to built refined molecular models. The molecule is present in DMSO solution as two slowly interconverting conformers, characterized by a cis-trans isomerism around the beta-Ala6-Pro1 peptide bond. This work confirms our expectations on the low propensity of beta-alanyl residues to be positioned at the corners of turned structure.

Beta-alanine containing cyclic peptides with turned structure: the "pseudo type II beta-turn." VI.

In the present paper we describe the synthesis, purification, single crystal x-ray analysis, and nmr solution characterization, combined with restrained molecular dynamic simulations, of the cyclic hexapeptide cyclo-(L-Pro-L-Phe-beta-Ala)2. The peptide was synthesized by classical solution methods and the cyclization of the free hexapeptide was accomplished in good yields in diluted methylene chloride solution using N,N-dicyclohexyl-carbodiimide. The compound crystallizes in the monoclinic space group P2(1) from methanol-dichloromethane solution. The two identical halves of the molecule adopt in the solid state two different conformations. One beta-Ala-L-Pro peptide bond is trans, while the second is cis. The molecule is present in dimethylsulfoxide d6 solutions as a mixture of conformational families. One of these corresponds to a C2 symmetrical molecule with both beta-Ala-Pro cis peptide bonds, while the second major conformation is very similar to that observed in the solid state. All Pro-Phe segments, both in the solid state and the symmetrical and unsymmetrical solution conformations, display phi, psi angles close to that of position i + 1 and i + 2 of type II beta-turns. In addition, the segments preceded by a trans beta-Ala-Pro peptide bond are characterized by a typical i<--i + 3 hydrogen bond, which is absent in the conformer containing a cis beta-Ala-Pro peptide bond. The latter conformation corresponds to a new structural domain we define as the "pseudo type II beta-turn."

The pseudo-beta I-turn. A new structural motif with a cis peptide bond in cyclic hexapeptides.

Synthesis and conformational analysis of three cyclic hexapeptides cyclo(-Gly1-Pro2-Phe3-Val4-Xaa5-Phe6), Xaa = Phe (I), D-Phe (II) and D-Pro (III), were carried out to examine the influence of proline on the formation of reverse turns and the dynamics of hydrophobic peptide regions. Assignment of all 1H and 13C resonances was achieved by homo- and heteronuclear 2D-NMR techniques (TOCSY, ROESY, HMQC, HMQC-TOCSY and HMBCS-270). The conformational analysis is based on interproton distances derived from ROESY spectra and homo- and heteronuclear coupling constants (E.COSY, HETLOC and HMBCS-270). For structural refinements restrained molecular dynamics (MD) simulations in vacuo and in DMSO were performed. Each peptide exhibits two conformations in DMSO solution due to cis-trans isomerism about the Gly-Pro peptide bond. Surprisingly the cis-Gly-Pro segment in the minor isomers is not involved in a beta VI-turn, but forms a turn structure with cis-Gly-Pro in the i and i + 1 positions. Although no stabilizing hydrogen bond is found in this turn, the phi- and psi-angles closely correspond to a beta I-turn [Pro2: phi(i + 1) -60 degrees, psi(i + 1) -30 degrees; Phe3: phi(i + 2) -100 degrees, psi(i + 2) -50 degrees]. Hence we call this structural element a pseudo-beta I-turn. As expected, in the dominating all-trans isomers proline occupies the i + 1 position of a standard beta I-turn. Therefore, cis-trans isomerization of the Gly1-Pro2 amide bond only induces a local conformational rearrangement, with minor structural changes in other parts of the molecule. However, the geometry of the other regions is affected by the chirality of the i + 1 amino acid for both isomers (beta I for Phe5, beta II' for D-Phe5 or D-Pro5).

Conformational versatility of the N alpha-acylated tripeptide amide tail of oxytocin. Synthesis and crystallographic characterization of three C2 alpha-backbone modified, conformationally restricted analogues.

The synthesis, physical and analytical characterization, and crystal-state structural analysis by X-ray diffraction of three analogues of the N alpha-acylated tripeptide amide tail of oxytocin, each containing a cyclic C alpha, alpha-disubstituted glycine at position 2, have been performed. The peptides are Boc-L-Pro-Ac3c-Gly-NH2, Z-L-Pro-Ac5c-Gly-NH2 and Z-L-Pro-Ac6c-Gly-NH2. While the former is folded in a type-II beta-turn conformation at the -L-Pro-Ac3c- sequence, the two latter tripeptides form two consecutive (type-II, type-I') beta-turns. The Ac5c- and Ac6c-tripeptides are the first examples of such a highly folded structural combination in a position-2 analogue of the N alpha-acylated -L-Pro-L-Leu-Gly-NH2 sequence.

beta-Alanine containing peptides: gamma-turns in cyclotetrapeptides.

In the present paper we describe the synthesis, purification, single-crystal x-ray analysis, solution conformational characterization, and conformational energy calculations of the cyclic tetrapeptide cyclo-(beta-Ala-L-Pro-beta-Ala-L-Val). The peptide was synthesized by classical solution methods and the cyclization of the free tetrapeptide was accomplished in good yields in diluted methylene chloride solution using N,N-dicyclohexyl-carbodiimide. The compound crystallizes in the monoclinic space group P2(1) from ethanol with two independent molecules in the unit cell. All peptide bonds are trans. The nmr molecular conformation in the acetonitrile solution as well as that derived from the molecular dynamic simulation in vacuo is quite different from those observed in the solid state and is very similar to that previously observed for the parent compound cyclo- (beta-Ala-L-Pro-beta-Ala-L-Pro).

Non coded C alpha, alpha-disubstituted amino acids. X-ray diffraction analysis of a dipeptide containing (S)-alpha-methylserine.

The crystal and molecular structure of the fully protected dipeptide Boc-Val-(S)-alpha-MeSer-OMe has been determined by X-ray diffraction techniques. Crystals grown from ethyl acetate/n-pentane mixtures are tetragonal, space group I4(1), with cell parameters at 295 K of a = 15.307(2), c = 18.937(10)A, V = 4437.1A3, M.W. = 332.40, Z = 8, Dm = 0.99 g/cm3 and Dx = 0.995 g/cm3. The structure was solved by application of direct methods and refined to an R value of 0.028 for 1773 reflections with I > or = 3 sigma (I) collected on a CAD-4 diffractometer. Both chiral centers have the (S) configuration. The dipeptide assumes in the solid state an S shape. The urethane moiety is in the cis conformation, while the amide bond is in the common trans conformation. The conformational angles phi 1, psi 1 of the Val and phi 2, and psi 2 of the (S)-alpha MeSer fall in the F region of the phi-psi map. The isopropyl side chain of the Val residue has the (t, g-) conformation, while the Ser side chain has a g+ conformation. The hydrogen bond donor groups are all involved in intermolecular H-bond interactions. Along the quaternary axis the dipeptide molecules are linked to each other with the formation of infinite rows.

Conformation for a beta-cyclodextrin monosubstituted with a cyclic dipeptide.

The structural characterization of a beta-cyclodextrin monosubstituted with the peptide cyclo(L-His-L-Leu) is reported. This work provides an x-ray example of a covalently bound group that folds in such a way that the terminal apolar side chain is retained in the hydrophobic interior of the cone-shaped cyclodextrin cavity. 6-Deoxy-6-cyclo(L-histidyl-L-leucyl)-beta-cyclodextrin crystallizes in the space group P1 with cell dimensions a = 14.728(8) A, b = 15.084(7) A, c = 18.182(10) A, alpha = 94.36(6) degrees, beta = 95.81(5) degrees, gamma = 116.08(9) degrees; overall isotropic agreement R = 10.6% for 5703 observed reflections (Fo greater than 3 sigma). The molecular structure consists of two independent molecules with the formula C54H86N4O36.7.25H2O. Each molecule assumes a "sleeping swan"-like overall shape with the hydrophobic leucine side chain inserted inside the cavity of the macrocycle. The two independent units give rise to a head-to-tail dimer linked by hydrogen bonds occurring between primary and secondary hydroxyl groups of the two monomers. The packing of the dimers produces cavities containing water molecules. There are infinite hydrophilic channels running in the crystal, which is similar to what is found in the structures of cyclic peptides.

Metabolic consequences of feeding a high-carbohydrate, high-fiber diet to diabetic patients with chronic kidney failure.

The aim of this study was to compare the metabolic effects of a high-carbohydrate (CHO), high-fiber diet with only moderate protein restriction with those of a low-CHO, low-fiber diet with a low protein content in six diabetic patients with moderate chronic renal failure. The high-CHO, high-fiber diet induced a significant improvement in blood glucose control, a significant decrease in serum cholesterol, and a significant increase in fecal nitrogen losses. Other variables evaluated were not significantly different between the two diets, except for a significant increase in serum phosphorus during the high-CHO, high-fiber diet. N balance was not significantly different from 0 at the end of either dietary period and was very similar for both diets. The high-CHO, high-fiber diet presents many beneficial metabolic effects in diabetic patients with chronic renal failure.