ABSTRACT
Polymorphism, a phenomenon whereby disparate self-assembled products can be formed from identical molecules, has incited interest in the field of supramolecular polymers. Conventionally, the monomers that constitute supramolecular polymers are engineered to facilitate one-dimensional aggregation and, consequently, their polymorphism surfaces primarily when the states of assembly differ significantly. This engenders polymorphs of divergent dimensionalities such as one- and two-dimensional aggregates. Notwithstanding, realizing supramolecular polymer polymorphism, wherein polymorphs maintain one-dimensional aggregation, persists as a daunting challenge. In this work, we expound upon the manifestation of two supramolecular polymer polymorphs formed from a large discotic supramolecular monomer (rosette), which consists of six hydrogen-bonded molecules with an extended π-conjugated core. These polymorphs are generated in mixtures of chloroform and methylcyclohexane, attributable to distinctly different disc stacking arrangements. The face-to-face (minimal displacement) and offset (large displacement) stacking arrangements can be predicated on their distinctive photophysical properties. The face-to-face stacking results in a twisted helix structure. Conversely, the offset stacking induces inherent curvature in the supramolecular fiber, thereby culminating in a hollow helical coil (helicoid). While both polymorphs exhibit bistability in nonpolar solvent compositions, the face-to-face stacking attains stability purely in a kinetic sense within a polar solvent composition and undergoes conversion into offset stacking through a dislocation of stacked rosettes. This occurs without the dissociation and nucleation of monomers, leading to unprecedented helicoidal folding of supramolecular polymers. Our findings augment our understanding of supramolecular polymer polymorphism, but they also highlight a distinctive method for achieving helicoidal folding in supramolecular polymers.
ABSTRACT
Insolubility of functional molecules caused by polymorphism sometimes poses limitations for their solution-based processing. Such a situation can also occur in the preparation processes of supramolecular polymers formed in a solution. An effective strategy to address this issue is to prepare amorphous solid states by introducing a "coformer" molecule capable of inhibiting the formation of an insoluble polymorph through co-aggregation. Herein, inspired by the coformer approach, we demonstrated a solubility enhancement of a barbiturate π-conjugated compound that can supramolecularly polymerize through six-membered hydrogen-bonded rosettes. Our newly synthesized supramolecular coformer molecule features a sterically demanding methyl group in the π-conjugated unit of the parent molecule. Although the parent molecule exhibits low solubility in nonpolar solvents due to the formation of a crystalline polymorph comprising a tape-like hydrogen-bonded array prior to the supramolecular polymerization, mixing with the coformer compound enhanced the solubility by inhibiting mesoscopic organization of the tapes. The two monomers were then co-polymerized into desired helicoidal supramolecular polymers through the formation of heteromeric rosettes.
ABSTRACT
BACKGROUND: The BP-SES has an abluminally applied biodegradable polymer that is fully resorbed after 3-4 months but may have longer-lasting effects. The aim of this study was to determine the long-term vascular response to the novel Ultimaster™ sirolimus-eluting stent (BP-SES). METHODS: BP-SESs, everolimus-eluting stents (DP-EESs), and bare metal stents were implanted in 22 coronary arteries of 15 mini-swine. All animals underwent optical frequent domain imaging (OFDI) to assess neointimal volume and quality at either 1 (n = 7) or 3 (n = 8) months and at 9 (n = 15) months and were euthanized at 9 months. Stents were subsequently histologically investigated to analyze the vascular response and maturity of neointimal tissue according to cell density. RESULTS: OFDI revealed greater regression in neointimal volume from 3 to 9 months with BP-SESs than with DP-EESs (-0.6 ± 0.5 mm2 vs. 0.00 ± 0.4 mm2, p = 0.07). Although there was no significant difference between BP-SESs and DP-EESs in the inflammation score (BMS, BP-SES, and DP-EES: 0.1 ± 0.1, 0.3 ± 0.4, and 0.4 ± 0.4, respectively; p < 0.0001) in histological analysis, BP-SESs showed slightly greater maturity than DP-EESs (1.8 ± 0.3, 1.7 ± 0.3, and 1.6 ± 0.3, p = 0.09). CONCLUSIONS: While both BP-SESs and DP-EESs showed minimal inflammatory responses at 9 months, BP-SESs showed a trend for greater neointimal maturity and regression, which may be related to earlier completion of the vascular response.
ABSTRACT
Helical folding of randomly coiled linear polymers is an essential organization process not only for biological polypeptides but also for synthetic functional polymers. Realization of this dynamic process in supramolecular polymers (SPs) is, however, a formidable challenge because of their inherent lability of main chains upon changing an external environment that can drive the folding process (e.g., solvent, concentration, and temperature). We herein report a photoinduced reversible folding/unfolding of rosette-based SPs driven by photoisomerization of a diarylethene (DAE). Temperature-controlled supramolecular polymerization of a barbiturate-functionalized DAE (open isomer) in nonpolar solvent results in the formation of intrinsically curved, but randomly coiled, SPs due to the presence of defects. Irradiation of the randomly coiled SPs with UV light causes efficient ring-closure reaction of the DAE moieties, which induces helical folding of the randomly coiled structures into helicoidal ones, as evidenced by atomic force microscopy and small-angle X-ray scattering. The helical folding is driven by internal structure ordering of the SP fiber that repairs the defects and interloop interaction occurring only for the resulting helicoidal structure. In contrast, direct supramolecular polymerization of the ring-closed DAE monomers by temperature control affords linearly extended ribbon-like SPs lacking intrinsic curvature that are thermodynamically less stable compared to the helicoidal SPs. The finding represents an important concept applicable to other SP systems; that is, postpolymerization (photo)reaction of preorganized kinetic structures can lead to more thermodynamically stable structures that are inaccessible directly through temperature-controlled protocols.
Subject(s)
Ethylenes/chemistry , Polymers/chemistry , Ultraviolet Rays , Barbiturates/chemistry , Isomerism , Macromolecular Substances/chemistry , Microscopy, Atomic Force , Polymerization , Temperature , ThermodynamicsABSTRACT
BACKGROUND AND AIMS: Polymerase chain reaction-based techniques require expensive equipment for fluorescence detection of the products. However, the measurement of inorganic pyrophosphate (PPi) released during DNA synthesis can be used to quantify target genes without such equipment. Here, we devised a high-sensitivity enzymatic assay for detection of PPi. MATERIALS AND METHODS: In our assay method, PPi was converted to hypoxanthine by hypoxanthine phosphoribosyl transferase. Xanthine dehydrogenase converted the hypoxanthine to uric acid and yielded two molecules of NADH, which in turn reduced Fe3+ to Fe2+ (mediated by 1-methoxy-5-ethylphenazinium ethylsulfate). 2-Nitroso-5-(N-propyl-N-sulfopropylamino) phenol chelated the Fe2+, which resulted in an intensely colored product that could be measured using a biochemical automated analyzer. RESULTS: The assay was able to detect PPi within 10 min. It was linear between 0 and 10 µmol/L PPi, and intra-run and inter-run coefficients of variation were 1%-2%. Other validation tests with a biochemical automated analyzer were satisfactory. The assay could potentially be used to directly quantify samples after isothermal nucleic acid sequence-based amplification of a target gene. CONCLUSION: The method developed here for detection of PPi can be used to measure nucleic acid biomarkers in biological samples in clinical practice using a high-throughput biochemical automated analyzer.
Subject(s)
Diphosphates , Self-Sustained Sequence Replication , Humans , Nucleic Acid Amplification Techniques , Polymerase Chain Reaction , Sensitivity and SpecificityABSTRACT
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
ABSTRACT
Mechanical interlocking of molecules (catenation) is a nontrivial challenge in modern synthetic chemistry and materials science1,2. One strategy to achieve catenation is the design of pre-annular molecules that are capable of both efficient cyclization and of pre-organizing another precursor to engage in subsequent interlocking3-9. This task is particularly difficult when the annular target is composed of a large ensemble of molecules, that is, when it is a supramolecular assembly. However, the construction of such unprecedented assemblies would enable the visualization of nontrivial nanotopologies through microscopy techniques, which would not only satisfy academic curiosity but also pave the way to the development of materials with nanotopology-derived properties. Here we report the synthesis of such a nanotopology using fibrous supramolecular assemblies with intrinsic curvature. Using a solvent-mixing strategy, we kinetically organized a molecule that can elongate into toroids with a radius of about 13 nanometres. Atomic force microscopy on the resulting nanoscale toroids revealed a high percentage of catenation, which is sufficient to yield 'nanolympiadane'10, a nanoscale catenane composed of five interlocked toroids. Spectroscopic and theoretical studies suggested that this unusually high degree of catenation stems from the secondary nucleation of the precursor molecules around the toroids. By modifying the self-assembly protocol to promote ring closure and secondary nucleation, a maximum catenation number of 22 was confirmed by atomic force microscopy.
ABSTRACT
Beyond phenomenon, self-assembly of synthetic molecules, is now becoming an essential tool to design supramolecular materials not only in the thermodynamically stable state but also in kinetically trapped states. However, an approach to design complex self-assembly processes comprising different types of self-assembled states remains elusive. Herein, an example of such systems is demonstrated based on a unique supramolecular polymer mediated by supermacrocyclization of hydrogen-bonding π-conjugated molecules. By adding an aromatic solvent into nonpolar solutions of the monomer, spontaneous nucleation triggered by supermacrocyclization was suppressed so that isothermal supramolecular polymerization could be achieved from kinetically formed topological variants and amorphous agglomerates to afford helicoidal structures hitherto obtainable only with very slow cooling of a hot solution. By increasing the proportion of aromatic solvent further, another self-assembly path was found, based on competing extended hydrogen-bonded motifs affording crystalline nanowires.
ABSTRACT
Supramolecular polymers have emerged in the last decade as highly accessible polymeric nanomaterials. An important step toward finely designed nanomaterials with versatile functions, such as those of natural proteins, is intricate topological control over their main chains. Herein, we report the facile one-shot preparation of supramolecular copolymers involving segregated secondary structures. By cooling non-polar solutions containing two monomers that individually afford helically folded and linearly extended secondary structures, we obtain unique nanofibers with coexisting distinct secondary structures. A spectroscopic analysis of the formation process of such topologically chimeric fibers reveals that the monomer composition varies gradually during the polymerization due to the formation of heteromeric hydrogen-bonded intermediates. We further demonstrate the folding of these chimeric fibers by light-induced deformation of the linearly extended segments.
ABSTRACT
Current drug-eluting stents have abluminal polymer coating; however, thrombus formation in these compared with that in uniformly coated stents remains controversial. We evaluated thrombus formation and early endothelialization after using abluminal biodegradable polymer-coated sirolimus- (BP-SES), and everolimus-eluting stents (BP-EES) versus a durable polymer-coated everolimus-eluting stent (DP-EES) in an in vivo setting. BP-SES, BP-EES, and DP-EES (n = 6 each) were implanted in coronary arteries of 12 mini-pigs that were then sacrificed after 7 and 10 days. Stents were stained with hematoxylin and eosin, and a combined Verhoeff and Masson trichrome stain. Areas of fibrin deposition were digitally detected and measured with off-line morphometric software. Stents were investigated for re-endothelialization by transmission electron microscopy. At 7 days, histological analysis revealed the lowest area of fibrin deposition in BP-SES (BP-SES vs. BP-EES vs. DP-EES; 0.10 ± 0.06 mm2 vs. 0.15 ± 0.07 mm2 vs. 0.19 ± 0.06 mm2, p = 0.0004). At 10 days, the area of fibrin deposition was significantly greater in DP-EES (0.13 ± 0.04 mm2 vs. 0.14 ± 0.05 mm2 vs. 0.19 ± 0.08 mm2, p = 0.007). Endothelial cells in BP-SES demonstrated a significantly greater number of tight junctions than those in DP-EES according to by transmission electron microscopy for both days (p<0.05). Various parameters, including an inflammatory reaction and neointimal formation, were comparable among the groups at 7 and 10 days. An abluminal biodegradable polymer-coated SES showed the least fibrin deposition and greatest endothelial cell recovery at an early stage following implantation in the coronary arteries of mini-pigs.
Subject(s)
Absorbable Implants , Coronary Vessels/surgery , Drug-Eluting Stents , Polymers/chemistry , Animals , Cardiovascular Agents/administration & dosage , Coated Materials, Biocompatible/administration & dosage , Coated Materials, Biocompatible/chemistry , Coronary Angiography/methods , Coronary Artery Disease/surgery , Endothelial Cells/metabolism , Everolimus/administration & dosage , Everolimus/chemistry , Fibrin/metabolism , Models, Animal , Percutaneous Coronary Intervention , Polymers/administration & dosage , Polymers/adverse effects , Prosthesis Design , Sirolimus/administration & dosage , Sirolimus/chemistry , Swine , Swine, Miniature , Thrombosis/etiology , Thrombosis/metabolism , Treatment OutcomeABSTRACT
We have developed a new method for obtaining information on whole tissues by light microscopy (LM) and ultrastructural features by transmission electron microscopy (TEM). This method uses serial sections of a stented artery embedded in resin. Stents were implanted in porcine coronary arteries in this study. The heart was perfusion fixed in a 2% paraformaldehyde and 1.25% glutaraldehyde mixed solution. The stented artery was then removed, fixed in 1% osmium, embedded in Quetol 651 resin, and sectioned serially. For LM, the black color of osmium was removed from the section by immersion in periodic acid and hydrogen peroxide after deplasticization. These sections were stained with hematoxylin and eosin and Elastica-Masson trichrome stain. For TEM, thin sections were re-embedded in Quetol 812 resin by the resupinate method and cut into ultrathin sections. A clear, fine structure was obtained, and organelles, microvilli, and cell junctions in the endothelium were easily observed. The combined observation of adjacent specimens by LM and TEM enabled us to relate histopathological changes in the millimeter scale to those in the nanometer scale.
Subject(s)
Coronary Vessels/ultrastructure , Epoxy Resins/chemistry , Histological Techniques/instrumentation , Histological Techniques/methods , Methacrylates/chemistry , Stents/adverse effects , Animals , Coronary Vessels/pathology , Microscopy , Microscopy, Electron, Transmission , Microtomy/methods , SwineABSTRACT
The aim of this study was to identify potential changes that could occur during histological evaluations of CLAWN miniature swine, with potential consequences for subsequent experiments. The systemic organs from male and female CLAWN miniature swine (16.3-42.3 months old) that had been used in long-term studies of coronary stent implantation were examined histologically. Commonly observed histopathological findings were testicular/epididymal atrophy, cyst-like follicles in the ovaries, hemosiderin deposition in the spleen, lipofuscin deposition in the proximal tubular epithelia and presence of eosinophilic globules in the Bowman's space and the lumen of the proximal tubules in the kidneys, and cellular infiltration in several organs, including the eyelids, respiratory organs, and digestive tract. However, none of these changes were serious enough to indicate a significant impact on research. In conclusion, this study identified CLAWN miniature swine as a suitable animal model for various experiments.
ABSTRACT
Longitudinal leaky SAWs (LLSAWs), which can be excited in a thick aluminum (A1) grating on a rotated Y-cut lithium-niobate substrate, were analyzed in a simulation that combined both FEM and BEM. The Q-value dependence of an LLSAW on the rotated angle and the Al-grating thickness was clear. The simulation results were confirmed experimentally. These SAWs have potential applications in high-frequency SAW devices because their velocities range from 6100 to 6500 m/s and their optimum Q values are theoretically larger than 4000.