Ocean-based sources of plastic pollution: An overview of the main marine activities in the Peruvian EEZ.

Marine-based activities are a critical source of plastic waste into the ocean. This is particularly important in countries with a competitive fishing industry, such as Peru. Thus, this study aimed to identify and quantify the major flows of plastic waste accumulating in the ocean from ocean-based sources within the Peruvian Economic Exclusive Zone. A material flow analysis was elaborated to analyze the stock of plastic and its release to the ocean by a set of Peruvian fleets, including the fishing industry, merchant vessels, cruises, and boating vessels. Results show that in 2018 between 2715 and 5584 metric tons of plastic waste entered the ocean. The fishing fleet was the most pollutant, representing approximately 97 % of the total. Moreover, fishing gear loss represented the highest single-activity contribution, although other sources, such as plastic packaging and antifouling emissions, have the potential to become vast sources of marine plastic pollution.

Climate change mitigation potential of transitioning from open dumpsters in Peru: Evaluation of mitigation strategies in critical dumpsites.

Waste management is a critical policy towards the reduction of environmental impacts to air, soil and water. Many Latin American countries, however, lack a correct waste management system in many cities and rural areas, leading to the accumulation of unmanaged waste in illegal or unregulated dumpsites. The case of Peru is of interest, as it hosts 5 of the 50 largest dumpsites in the world. An erratic waste management compromises climate actions for Peru to commit with the Paris Agreement, as no correct closure systems are established for these dumpsites. Therefore, the main objective of this study is to assess the contribution of the past and present biodegradable waste produced and disposed of in the most critical open dumpsters to the overall annual greenhouse gas (GHG) emissions of Peru using the IPCC model. Thereafter, the climate change mitigation potential of possible dumpsite closure strategies based on a selection of technologies, including economic feasibility, were estimated. Results show that cumulative GHG emissions in 2018 for the 24 critical dumpsites evaluated added up to 704 kt CO2 eq. and a cumulative value of 4.4 Mt CO2 eq. in the period 2019-2028, representing over 40 % of solid waste emissions expected by 2030. Mitigation potentials for these emissions tanged from 91 to 970 kt CO2 eq. in the ten-year period depending on the mitigation strategies adopted. The costs of these strategies are also discussed and are expected to be of utility to complement Peru's waste management commitments in the frame of the Paris Agreement.

Environmental footprint of critical agro-export products in the Peruvian hyper-arid coast: A case study for green asparagus and avocado.

Peru has become one of the world's main agricultural hubs for a wide range of fruits and vegetables. Two of these products, avocado and green asparagus, have raised attention in recent years in the international scene from an environmental perspective due to the high amounts of water they require, as well as the long air and marine freighting distances to export these products to Europe, Asia or the US. Consequently, the aim of the current study was to perform an environmental assessment of these two products using two life-cycle methods: carbon and water footprint. For the latter, water scarcity, acidification, eco-toxicity and eutrophication impact categories have been selected for assessment. Inventory data were gathered from six different companies located in different regions of the hyper-arid Peruvian coast. The results report that the products are not carbon intensive and are in line with other similar plant-based products. Conversely, the hyper-arid conditions of the cultivation sites require a large volume of groundwater to fulfill the needs of the crops. Interestingly, even though this may lead to overexploitation of groundwater resources in the absence of appropriate management policies, the low mobility of pollutants, namely pesticides, constitutes a natural barrier to protect the degradation of natural water bodies. Similarly, highly technified irrigation systems have allowed minimizing the amounts of water used per hectare. In conclusion, results from this study may be useful in more concise environmental assessment studies on food products and diets, considering the consumption of these Peruvian products in many countries in the world. Furthermore, results are also important at regional level since they depict the carbon and water performance of these products and can also be accompanied by cross-cutting certification schemes, including Product Environmental Footprint Category Rules Guidance.

Biocomposites of Bio-Polyethylene Reinforced with a Hydrothermal-Alkaline Sugarcane Bagasse Pulp and Coupled with a Bio-Based Compatibilizer.

Bio-polyethylene (BioPE, derived from sugarcane), sugarcane bagasse pulp, and two compatibilizers (fossil and bio-based), were used to manufacture biocomposite filaments for 3D printing. Biocomposite filaments were manufactured and characterized in detail, including measurement of water absorption, mechanical properties, thermal stability and decomposition temperature (thermo-gravimetric analysis (TGA)). Differential scanning calorimetry (DSC) was performed to measure the glass transition temperature (Tg). Scanning electron microscopy (SEM) was applied to assess the fracture area of the filaments after mechanical testing. Increases of up to 10% in water absorption were measured for the samples with 40 wt% fibers and the fossil compatibilizer. The mechanical properties were improved by increasing the fraction of bagasse fibers from 0% to 20% and 40%. The suitability of the biocomposite filaments was tested for 3D printing, and some shapes were printed as demonstrators. Importantly, in a cradle-to-gate life cycle analysis of the biocomposites, we demonstrated that replacing fossil compatibilizer with a bio-based compatibilizer contributes to a reduction in CO2-eq emissions, and an increase in CO2 capture, achieving a CO2-eq storage of 2.12 kg CO2 eq/kg for the biocomposite containing 40% bagasse fibers and 6% bio-based compatibilizer.

Life cycle assessment of bagasse fiber reinforced biocomposites.

This study aims to evaluate the life cycle environmental implications of producing fiber-reinforced biocomposite pellets, compared with sugarcane- and petroleum-based polyethylene (PE) pellets. Life Cycle Assessment (LCA) methodology is used to evaluate the production of four types of pellets. LCA allows the evaluation of the benefits of improving the production of biobased materials by replacing part of the sugarcane bioPE with bagasse fibers. The functional unit selected was the production of 1 kg of plastic pellets. Primary data were collected from laboratory tests designed to obtain pulp fibers from bagasse and mix them with sugarcane bioPE. Two processes were studied to obtain fibers from bagasse: soda fractionation and hot water-soda fractionation. The results from the LCA show environmental improvements when reducing the amount of bioPE by replacing it with bagasse fibers in the categories of global warming, ozone formation, terrestrial acidification and fossil resource scarcity, when comparing to 100% sugarcane bioPE, and a reduction in global warming and fossil resource scarcity when compared to fossil-based PE. In contrast, results also indicate that there could be higher impacts in terms of ozone formation, freshwater eutrophication, and terrestrial acidification. Even though biocomposites result as a preferred option to bioPE, several challenges need to be overcome before a final recommendation is placed. The sensitivity analysis showed the importance of the energy source on the impacts of the processing of fibers. Thus, using clean energy to produce biobased materials may reduce the impacts related to the production stage. These results are intended to increase the attention of the revalorization of these residues and their application to generate more advanced materials. Further outlook should also consider a deeper evaluation of the impacts during the production of a plastic object and possible effects of the biobased materials during final disposal.