Powder bed fusion-laser beam (PBF-LB) three-dimensional (3D) printing: Influence of laser hatching distance on the properties of zolpidem tartrate tablets.

Laser sintering, known as powder bed fusion-laser beam (PBF-LB), offers promising potential for the fabrication of patient-specific drugs. The aim of this study was to provide an insight into the PBF-LB process with regard to the process parameters, in particular the laser hatching distance, and its influence on the properties of zolpidem tartrate (ZT) tablets. PHARMACOAT® 603 was used as the polymer, while Candurin® Gold Sheen and AEROSIL® 200 were added to facilitate 3D printing. The particle size distribution of the powder blend showed that the layer height should be set to 100 µm, while the laser hatching distance was varied in five different steps (50, 100, 150, 200 and 250 µm), keeping the temperature and laser scanning speed constant. Increasing the laser hatching distance and decreasing the laser energy input led to a decrease in the colour intensity, mass, density and hardness of the ZT tablets, while the disintegration and dissolution rate were faster due to the more fragile bonds between the particles. The laser hatching distance also influenced the ZT dosage, indicating the importance of this process parameter in the production of presonalized drugs. The absence of drug-polymer interactions and the amorphization of the ZT were confirmed.

Ex vivo and in vivo antioxidant activity of ß-hydroxy-ß-arylalkanoic acids.

The interplay between oxidative stress and inflammation is implicated in many chronic diseases including Alzheimer`s disease, cardiovascular diseases, diabetes and cancer. Thirteen ß-hydroxy-ß-arylalkanoic acids were previously synthesized and evaluated for their anti-inflammatory activity. The aim of this study was to asses ex vivo antioxidant activity of synthesized acids, as well as ibuprofen and to identify the compounds with the most promising results for further investigation on their capacity to counteract in vivo oxidative stress triggered by inflammation. The antioxidant potential of tested compounds was evaluated by determining the concentrations of total antioxidative status, total oxidative status, prooxidant antioxidant balance and the total sulfhydryl groups. Z score statistics were used to calculate the summary scores for antioxidative activity, prooxidative activity and oxy score. The tested compounds and ibuprofen demonstrated mild prooxidative activity ex vivo. Seven acids with substituents on one benzene ring exhibited better results than ibuprofen and were selected for in vivo testing. In vivo results demonstrated better antioxidant protection compared to ex vivo results. Compound g which contains nitro group on the benzene ring demonstrated the lowest oxy score, and four compounds exhibited better results than ibuprofen.

Targeting outer membrane protein A (OmpA) - inhibitory effect of 2'-hydroxychalcone derivatives on Acinetobacter baumannii and Candida albicans dual-species biofilm formation.

Biofilm production facilitates microbial colonization of wounds and catheters. Acinetobacter baumannii produces high levels of biofilm and causes difficult-to-treat nosocomial infections. Candida albicans is another strong biofilm producer which may facilitate A. baumannii adhesion by providing hyphae-mediated OmpA-binding sites. Here we tested the potential of 2'-hydroxychalcones to inhibit dual-species biofilm production of A. baumannii and Candida spp., and further predicted the mechanism of structure-related difference in activity. The results suggest that 2'-hydroxychalcones exhibit potent activity against Candida spp./A. baumannii dual-species biofilm production. Particularly active was trifluoromethyl-substituted derivative (p-CF3), which decreased C. albicans/A. baumannii biomass produced on vein-indwelling parts of the central venous catheterization set by up to 99%. Further, higher OmpA-binding affinity was also calculated for p-CF3, which together with demonstrated significant ompA-downregulating activity, suggests that superior antibiofilm activity of this chalcone against the tested dual-species community of A. baumannii is mediated through the OmpA.

Electrochemical Characterisation and Confirmation of Antioxidative Properties of Ivermectin in Biological Medium.

Ivermectin (IVM) is a drug from the group of anthelmintics used in veterinary and human medicine. Recently, interest in IVM has increased as it has been used for the treatment of some malignant diseases, as well as viral infections caused by the Zika virus, HIV-1 and SARS-CoV-2. The electrochemical behaviour of IVM was investigated using cyclic (CV), differential pulse (DPV) and square wave voltammetry (SWV) at glassy carbon electrode (GCE). IVM showed independent oxidation and reduction processes. The effect of pH and scan rate indicated the irreversibility of all processes and confirmed the diffusion character of oxidation and reduction as an adsorption-controlled process. Mechanisms for IVM oxidation at the tetrahydrofuran ring and reduction of the 1,4-diene structure in the IVM molecule are proposed. The redox behaviour of IVM in a biological matrix (human serum pool) showed a pronounced antioxidant potential similar to that of Trolox during short incubation, whereas a prolonged stay among biomolecules and in the presence of an exogenous pro-oxidant (tert-butyl hydroperoxide, TBH) resulted in a loss of its antioxidant effect. The antioxidant potential of IVM was confirmed by voltametric methodology which is proposed for the first time.

Formulation and characterization of immediate-release oral dosage forms with zolpidem tartrate fabricated by digital light processing (DLP) 3D printing technique.

The introduction of three-dimensional (3D) printing in the pharmaceutical field has made great strides towards innovations in the way drugs are designed and manufactured. In this study, digital light processing (DLP) technique was used to fabricate oral dosage forms of different shapes with zolpidem tartrate (ZT), incorporated within its therapeutic range. Formulation factors, such as poly(ethylene glycol) diacrylate (PEGDA) and poly(ethylene glycol) 400 (PEG 400) ratio, as well as water content, were varied in combination with the surface area/volume (SA/V) ratio to achieve immediate drug release. Hypromellose (HPMC) was used as a stabilizing agent of photoreactive suspensions in an attempt to prevent drug sedimentation and subsequent variations in drug content uniformity. Oral dosage forms with doses in the range from 0.15 mg to 6.37 mg, showing very rapid and rapid drug dissolution, were successfully fabricated, confirming the potential of this technique in drug manufacturing with the ability to provide flexible dose adjustments and desirable release profiles by varying formulation factors and geometry of 3D models. DSC (differential scanning calorimetry), XRPD (X-ray powder diffraction) and scanning electron microscopy (SEM) showed that ZT remained in a crystalline form within printed dosage forms and no interactions were found between ZT and polymers.

Long-term stability of clopidogrel solid dispersions-Importance of in vitro dissolution test.

Formulation of solid dispersions (SDs), in which the drug substance is dissolved or dispersed inside a polymer matrix, is one of the modern approaches to increase the solubility and dissolution rate of poorly soluble active pharmaceutical ingredients (APIs), such as clopidogrel. In the form of a free base, clopidogrel is unstable under increased both high moisture and temperature, so it is most often used as its salt form, clopidogrel hydrogen sulfate (CHS).The aim of this study was the formulation, characterization, and long-term stability investigation of CHS solid dispersions, prepared with four different hydrophilic polymers (poloxamer 407, macrogol 6000, povidone, copovidone) in five API/polymer ratios (1:1, 1:2, 1:3, 1:5, 1:9). SDs were prepared by the solvent evaporation method, employing ethanol (96% v/v) as a solvent. Initial results of the in vitro dissolution test showed an increase in the amount of dissolved CHS from all prepared SD samples compared to pure CHS, corresponding physical mixtures (PMs), and commercial tablets. SDs, prepared with poloxamer 407, macrogol 6000, and copovidone, at CHS/polymer ratios 1:5 and 1:9, notably increased the amount of dissolved CHS (> 80%, after 60 min), thus they were selected for further characterization. To assess the SDs long-term stability, in vitro dissolution studies, clopidogrel content determination, differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR) were performed initially and after 12 months of long-term stability studies under controlled conditions (25°C, 60% RH) meeting the ICH guideline Q1A (R2) requirements. The clopidogrel content in the selected samples was very similar at the beginning (96.13% to 99.93%) and at the end (95.98% to 99.86%) of the conducted test. DSC curves and FT-IR spectra of all SD samples after 12 months of stability study, showed the absence of CHS crystallization, which is an indication of good stability. However, the in vitro dissolution test showed a considerable reduction in CHS released from SDs with macrogol 6000. The amount of dissolved CHS from SDs with macrogol 6000 was initially 94.02% and 92.01%, and after 12 months of stability study, only 65.13% and 49.62%. In contrast, the amount of dissolved CHS from SDs prepared with poloxamer 407 and copovidone was very similar after 12 months of the stability study compared to the initial values. Results obtained indicated the great importance of the in vitro dissolution test in determining the long-term stability and quality of SDs.

Understanding the Effect of Energy Density and Formulation Factors on the Printability and Characteristics of SLS Irbesartan Tablets-Application of the Decision Tree Model.

Selective laser sintering (SLS) is a rapid prototyping technique for the production of three-dimensional objects through selectively sintering powder-based layer materials. The aim of the study was to investigate the effect of energy density (ED) and formulation factors on the printability and characteristics of SLS irbesartan tablets. The correlation between formulation factors, ED, and printability was obtained using a decision tree model with an accuracy of 80%. FT-IR results revealed that there was no interaction between irbesartan and the applied excipients. DSC results indicated that irbesartan was present in an amorphous form in printed tablets. ED had a significant influence on tablets' physical, mechanical, and morphological characteristics. Adding lactose monohydrate enabled faster drug release while reducing the possibility for printing with different laser speeds. However, formulations with crospovidone were printable with a wider range of laser speeds. The adjustment of formulation and process parameters enabled the production of SLS tablets with hydroxypropyl methylcellulose with complete release in less than 30 min. The results suggest that a decision tree could be a useful tool for predicting the printability of pharmaceutical formulations. Tailoring the characteristics of SLS irbesartan tablets by ED is possible; however, it needs to be governed by the composition of the whole formulation.

The evaluation of the effect of different superdisintegrants on the drug release from FDM 3D printed tablets through different applied strategies: In vitro-in silico assessment.

Paracetamol-loaded tablets were printed by fused deposition modelling technique, using polyvinyl alcohol as a backbone polymer and Affinisol™ HPMC as a plasticizer in all formulations. Four different strategies were applied in order to accelerate the drug release from the tablets. First, different release enhancers were added: sodium starch glycolate, croscarmellose sodium, Kollidon CL and mannitol. Kollidon CL and mannitol showed the greatest influence on the drug dissolution rate. The second strategy included lowering the infill density, which did not make any significant changes in dissolution profiles, according to the calculated similarity factor. Then the best two release enhancers from the first strategy were combined (Kollidon CL and mannitol) and this proved to be the most effective in the drug release acceleration. The fourth strategy, increasing the percentage of the release enhancers in formulation, revealed the importance of their concentration limits. In summary, the drug release accelerated from 58% released after 5 h to reaching the plateau within 2 h. In silico physiologically-based biopharmaceutics modelling showed that formulations with mannitol and Kollidon CL, especially the formulation containing a combination of these release enhancers, can provide relatively fast drug release and extent of drug absorption that complies with an immediate release tablet.

Potential application of low molecular weight excipients for amorphization and dissolution enhancement of carvedilol.

In this study, four low molecular weight (LMW) excipients, tryptophan (TRY), phenylalanine (PHE), lysine (LYS) and saccharin (SAC) were evaluated as co-formers to generate co-amorphous systems (CAMS) by ball milling with carvedilol (CRV). Mixtures of CRV and LMW excipient in 1:0.5, 1:1 and 1:2 drug:excipient molar ratios were ball milled and analysed by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Fourier transform (FT-IR) infrared spectroscopy and dissolution testing. CAMS were formed by milling of a mixture of CRV with TRY in 1:2 M ratio and SAC in 1:1 M ratio, while amorphization of only CRV was achieved in other mixtures with SAC. In other samples containing TRY and PHE, milling resulted in partial amorphization, while LYS was the least suitable excipient for the amorphization of CRV. Unexpectedly, the highest supersaturation of CRV was achieved from samples containing CRV and LYS in 1:1 and 1:2 M ratios, despite the absence of a significant reduction in CRV crystallinity upon milling of these samples. Increase of hydrophobic surface area caused by milling of samples with TRY and PHE and agglomeration during dissolution testing of samples containing SAC are likely causes of poor dissolution performance of mixtures containing fully or partially amorphous CRV.

Prediction of Drug Stability Using Deep Learning Approach: Case Study of Esomeprazole 40 mg Freeze-Dried Powder for Solution.

A critical step in the production of Esomeprazole powder for solution is a period between the filling process and lyophilization, where all vials, partially closed, are completely exposed to environmental influences. Excessive instability reflects in pH value variations caused by oxygen's impact. In order to provide pH control, which consequently affects drug stability, Esomeprazole batches, produced in the same way, were kept in partially closed vials for 3 h at temperatures of 20 °C and -30 °C, after which they were lyophilized and stored for long-term stability for 36 months. The aim of the presented study was to apply a deep-learning algorithm for the prediction of the Esomeprazole stability profile and to determine the pH limit for the reconstituted solution of the final freeze-dried product that would assure a quality product profile over a storage period of 36 months. Multilayer perceptron (MLP) as a deep learning tool, with four layers, was used. The pH value of Esomeprazole solution and time of storage (months) were inputs for the network, while Esomeprazole assay and four main impurities were outputs of the network. In order to keep all related substances and Esomeprazole assay in accordance with specifications for the whole shelf life, the pH value for the reconstituted finish product should be set in the range of 10.4-10.6.

Methoxy-Substituted Hydroxychalcone Reduces Biofilm Production, Adhesion and Surface Motility of Acinetobacter baumannii by Inhibiting ompA Gene Expression.

An increasing lack of available therapeutic options against Acinetobacter baumannii urged researchers to seek alternative ways to fight this extremely resistant nosocomial pathogen. Targeting its virulence appears to be a promising strategy, as it offers considerably reduced selection of resistant mutants. In this study, we tested antibiofilm potential of four synthetic chalcone derivatives against A. baumannii. Compound that showed the greatest activity was selected for further evaluation of its antivirulence properties. Real-time PCR was used to evaluate mRNA expression of biofilm-associated virulence factor genes (ompA, bap, abaI) in treated A. baumannii strains. Also, we examined virulence properties related to the expression of these genes, such as fibronectin- and collagen-mediated adhesion, surface motility, and quorum-sensing activity. The results revealed that the expression of all tested genes is downregulated together with the reduction of adhesion and motility. The conclusion is that 2'-hydroxy-2-methoxychalcone exhibits antivirulence activity against A. baumannii by inhibiting the expression of ompA and bap genes, which is reflected in reduced biofilm formation, adhesion, and surface motility.

Digital Light Processing (DLP) 3D Printing of Atomoxetine Hydrochloride Tablets Using Photoreactive Suspensions.

Three-dimensional (3D) printing technologies are based on successive material printing layer-by-layer and are considered suitable for the production of dosage forms customized for a patient's needs. In this study, tablets of atomoxetine hydrochloride (ATH) have been successfully fabricated by a digital light processing (DLP) 3D printing technology. Initial materials were photoreactive suspensions, composed of poly(ethylene glycol) diacrylate 700 (PEGDA 700), poly(ethylene glycol) 400 (PEG 400), photoinitiator and suspended ATH. The amount of ATH was varied from 10.00 to 25.00% (w/w), and a range of doses from 12.21 to 40.07 mg has been achieved, indicating the possibility of personalized therapy. The rheological characteristics of all photoreactive suspensions were appropriate for the printing process, while the amount of the suspended particles in the photoreactive suspensions had an impact on the 3D printing process, as well as on mechanical and biopharmaceutical characteristics of tablets. Only the formulation with the highest content of ATH had significantly different tensile strength compared to other formulations. All tablets showed sustained drug release during at least the 8h. ATH crystals were observed with polarized light microscopy of photoreactive suspensions and the cross-sections of the tablets, while no interactions between ATH and polymers were detected by FT-IR spectroscopy.

Differences in antioxidant potential of chalcones in human serum: In vitro study.

INTRODUCTION: An imbalance between oxidants and antioxidants in favour of oxidants, potentially leading to damage, is termed oxidative stress. Antioxidants (AO), either enzymatic or non-enzymatic, are the ones that can reduce diverse effects of pro-oxidants such as DNA, proteins and lipids damage. Chalcones (1,3-diaryl-2-propen-1-ones) are open chain flavonoids that are widely biosynthesized in plants. Aim of this study was to test antioxidative potency of 15 chalcones (Chs) in in vitro model in serum (native conditions), so as with exogenously induced oxidative stress. MATERIAL AND METHODS: Oxidative stress was induced in serum samples of healthy individuals with 0.25 mmol/L terc-buthyl-hydroperoxide (TBH), and then we monitored the effects of various concentrations of chalcones on oxidative stress parameters: total antioxidative status (TAS), total oxidative status (TOS), total concentration of sulfhydryl group (SHG) and prooxidative-antioxidative balance (PAB), and calculated prooxidative score, antioxidative score, and oxy score (OS). Nonparametric repeated measures ANOVA (Friedman's test) was used for comparison of antioxidative potency of samples with 15 different chalcones, in a native state and upon TBH influence. Spearman's nonparametric correlation analysis was used for estimation of relation between different parameters. RESULTS: Negative Oxy Score (OS) values for Chs11-15 showed significantly stronger antioxidative potency compared to other investigated chalcones (p < 0.05). Ch11, Ch13 and Ch14 remained with negative OS even after TBH addition, whereas OS of Ch12 and Ch15 became positive, with small nominal values. Samples with Ch11 and Ch13 showed significant negative correlation between TAS and TOS (p < 0.05 for both), but in Ch14 sample the negative correlation existed between TAS and PAB (p < 0.05). CONCLUSION: Lower value of OS (i.e. better antioxidative potency) was noticed in samples with Ch11-Ch15. Electron-donor effects of substituent groups as a structural part of these chalcones could explain its antioxidative capability. Phenolic and methyl groups are responsible for antioxidative ability enhancement of five chalcones with the best activity.

Modulation of oxidative stress/antioxidative defence in human serum treated by four different tyrosine kinase inhibitors.

Recent findings implied the significance of reactive oxygen species (ROS) as a part of tyrosine kinase inhibitors (TKIs) pharmacological activity. Evidences also suggested that toxic effects of TKIs were related to ROS production. The results regarding benefits of vitamin E usage alongside with prescribed TKIs therapy are ambiguous. We aimed to examine oxidative stress and antioxidative defense in human serum treated with four different TKIs and their possible interactions with hydrosoluble vitamin E analog (Trolox). An in-vitro experiment with serum pool as a substitute model was performed. Different parameters of oxidative stress and antioxidative defense were measured in serum pool with and without addition of TKIs (axitinib, crizotinib, nilotinib, and imatinib), before and after addition of Trolox. Z score statistic was used for calculation of Prooxidative and Antioxidative scores. The highest oxidative potential was recorded for samples incubated with imatinib and nilotinib, while the lowest damaging scores were observed for crizotinib and axitinib (nilotinib vs. imatinib, P < 0.05; axitinib vs. imatinib, P < 0.01; crizotinib vs. imatinib, P < 0.001). The best capability for antioxidative protection was seen in samples with nilotinib, then with imatinib, while the lowest level was obtained in samples with crizotinib and axitinib (imatinib and axitinib vs. nilotinib, P < 0.05 for both; crizotinib vs. nilotinib, P < 0.01; axitinib vs. imatinib, P < 0.05, crizotinib vs. imatinib, P < 0.01). Our results demonstrated the opposite effects of Trolox in combination with imatinib and nilotinib. Usage of antioxidant in combination with TKIs should be carefully evaluated in each specific case.

Molecular Docking, Synthesis and anti-HIV-1 Protease Activity of Novel Chalcones.

BACKGROUND: Since the beginning of the HIV/AIDS epidemic, 75 million people have been infected with the HIV and about 32 million people have died of AIDS. Investigation of the molecular mechanisms critical to the HIV replication cycle led to the identification of potential drug targets for AIDS therapy. One of the most important discoveries is HIV-1 protease, an enzyme that plays an essential role in the replication cycle of HIV. OBJECTIVE: The aim of the present study is to synthesize and investigate anti-HIV-1 protease activity of some chalcone derivatives with the hope of discovering new lead structure devoid drug resistance. METHODS: 20 structurally similar chalcone derivatives were synthesized and their physico-chemical characterization was performed. Binding of chalcones to HIV-1 protease was investigated by fluorimetric assay. Molecular docking studies were conducted to understand the interactions. RESULTS: The obtained results revealed that all compounds showed anti-HIV-1 protease activity. Compound C1 showed the highest inhibitory activity with an IC50 value of 0.001 µM, which is comparable with commercial product Darunavir. CONCLUSION: It is difficult to provide general principles of inhibitor design. Structural properties of the compounds are not the only consideration; ease of chemical synthesis, low molecular weight, bioavailability, and stability are also of crucial importance. Compared to commercial products the main advantage of compound C1 is the ease of chemical synthesis and low molecular weight. Furthermore, compound C1 has a structure that is different to peptidomimetics, which could contribute to its stability and bioavailability.

Antimicrobial activity of novel chalcones and modulation of virulence factors in hospital strains of Acinetobacter baumannii and Pseudomonas aeruginosa.

Acinetobacter baumannii and Pseudomonas aeruginosa are frequent multiresistant nosocomial pathogens that cause wound and pulmonary infections in hospitalized patients. As being increasingly resistant to most clinically available antibiotics, there is a constant need for exploration of new substances that could kill them or inhibit their growth, or alternatively inhibit some of their essential virulence factors. Chalcones are chemical compounds with well-documented antimicrobial potential. The aim of this study was to examine effectiveness of four newly-synthesized chalcones against the multiresistant clinical strains of A. baumannii and P. aeruginosa. Antibacterial activity of chalcones was investigated with broth-microdilution test and time-dependent killing assay. Synergistic effects of tested compounds with antibiotics (meropenem, amikacin and ciprofloxacin) were determined by checkerboard assay. The effects of chalcones on expression of virulence factors in P. aeruginosa (pyocyanin production, swimming and swarming motility) and A. baumannii (twitching and surface-associated motility), along with their biofilm production, were also examined. The obtained results indicate substantial antimicrobial activity of the tested chalcones (MICs = 100-175 µg/mL) and several synergistic interactions with antibiotics, as well as notable reduction in expression of all investigated virulence factors. These promising results may constitute a good basis for further research.

A novel thiourea type organocatalyst possessing a single NH functionality.

A novel thiourea organocatalyst was rationally designed by altering a typical H-bonding pattern of thiourea derivatives and utilising the potential of the 3,5-bis(trifluoromethyl)phenyl motif to participate in the H-bond formation. This unique catalyst afforded the products of the α-amination and Michael reaction in excellent yields and with a high level of stereoselectivity. Although additional studies are necessary to establish the full potential of the catalyst and to broaden its application further, the presented results may indicate alternative routes for further exploration of the thiourea class of organocatalysts.

Synthesis of the vitamin E amino acid esters with an enhanced anticancer activity and in silico screening for new antineoplastic drugs.

Tocopherols and tocotrienols belong to the family of vitamin E (VE) with the well-known antioxidant properties. For certain α-tocopherol and γ-tocotrienol derivatives used as the lead compounds in this study, antitumor activities against various cancer cell types have been reported. In the course of the last decade, structural analogs of VE (esters, ethers and amides) with an enhanced antiproliferative and proapoptotic activity against various cancer cells were synthesized. Within the framework of this study, seven amino acid esters of α-tocopherol (4a-d) and γ-tocotrienol (6a-c) were prepared using the EDC/DMAP reaction conditions and their ability to inhibit proliferation of the MCF-7 and MDA-MB-231 breast cancer cells and the A549 lung cancer cells was evaluated. Compound 6a showed an activity against all three cell lines (IC50: 20.6µM, 28.6µM and 19µM for the MCF-7, MDA-MB-231 and A549 cells, respectively), while compound 4a inhibited proliferation of the MCF-7 (IC50=8.6µM) and A549 cells (IC50=8.6µM). Ester 4d exerted strong antiproliferative activity against the estrogen-unresponsive, multi-drug resistant MDA-MB-231 breast cancer cell line, with IC50 value of 9.2µM. Compared with the strong activity of compounds 4a, 4d and 6a, commercial α-tocopheryl succinate and γ-tocotrienol showed only a limited activity against all three cell lines, with IC50 values >50µM. Investigation of the cell cycle phase distribution and the cell death induction confirmed an apoptosis of the MDA-MB-231 cells treated with 4d, as well as a synergistic effect of 4d with the known anticancer drug doxorubicin. This result suggests a possibility of a combined therapy of breast cancer in order to improve the therapeutic response and to lower the toxicity associated with a high dose of doxorubicin. The stability study of 4d in human plasma showed that ca. 83% initial concentration of this compound remains in plasma in the course of six hours incubation. The ligand based virtual screening of the ChEMBL database identified new compounds with a potential antiproliferative activity on MCF-7 and on multi-drug resistant MDA-MB 231 breast cancer cells.

Direct UV Spectrophotometry and HPLC Determination of Triton X-100 in Split Virus Influenza Vaccine.

One of the most commonly used surfactants in the production of split virus influenza vaccine is nonionic surfactant Triton X-100. After splitting of the virus is accomplished, Triton X-100 is removed from the vaccine by subsequent production steps. Because of toxicity of Triton X-100, which remains in the vaccine in residual amounts, a sufficiently sensitive method for its detection and quantification needs to be defined. Two methods for determination of Triton X-100 residuals were developed: the UV-spectrophotometry and HPLC methods. For both methods, preparation of vaccine samples and removal of proteins and virus particles were crucial: samples were treated with methanol (1:1) and then centrifuged at 25 000 × g for 30 min. After such treatment, the majority of vaccine components that interfered in the UV region were removed, and diluted samples could be directly measured. The chromatographic system included C18 column, step methanol gradient, and detection at 225 nm with a single peak of Triton X-100 at 12.6 min. Both methods were validated and gave satisfactory results for accuracy, precision, specificity, linearity, and robustness. LOQ was slightly lower for the HPLC method. Hence, it was shown that both methods are suitable for analysis of residual amounts of Triton X-100, with the advantages of the UV method being its simplicity and availability in most laboratories.

Inhibitory Effect of Newly-Synthesized Chalcones on Hemolytic Activity of Methicillin-Resistant Staphylococcus aureus.

Pathogenicity of methicillin-resistant Staphylococcus aureus (MRSA) is associated with a broad spectrum of virulence factors, amongst which is α-hemolysin. The aim of this study was to investigate the effect of three newly-synthesized chalcones (1,3- Bis-(2-hydroxy-phenyl)-propenone, 3-(3-Hydroxy-phenyl)-1-(2-hydroxy-phenyl)-propenone and 3-(4-Hydroxy-phenyl)-1-(2-hydroxy-phenyl)-propenone) on a-hemolysin production of clinical isolates of MRSA. Subinhibitory concentrations of the tested compounds reduced hemolytic activity of MRSA strains, with almost complete abolishment of hemolysis at concentrations in the range of 1/2-1/4 x MIC (25-12.5 µg/ml). In conclusion, newly-synthesized chalcones tested in this study showed potent inhibitory activity on α-hemolysin production of multiresistant and genetically diverse MRSA strains.