More resource efficient recycling of copper and copper alloys by using X-ray fluorescence sorting systems: An investigation on the metallic fraction of mixed foundry residues.

According to the state of the art, most of the mixed copper and copper alloy scrap and residues are processed in a copper smelter. Despite the environmental and economic advantages relative to primary production, the recycling of copper and its alloying elements (zinc, tin, lead, nickel, etc.) requires significantly more energy and cost than remelting unmixed or pure scrap fractions such as separate collected material or production scrap. To date, however, less attention has been given to the mechanical purification of mixed scrap. Therefore, sorting by alloy-specific components (SBASC) using an industrial X-ray fluorescence (XRF) sorting system was tested on the coarse metallic fraction (10-32 mm) of mixed foundry residues. The findings show that XRF-SBASC can recover higher-grade copper concentrates (reaching 98.3% Cu), leaded brass and complex alloys, such as aluminium bronze and red brass with high purities, for the use in the production of new materials. XRF-SBASC can therefore contribute to a more resource efficient metal recycling, mainly by reducing the energy consumption and loss levels in copper metallurgy.

Clinical criteria accurately diagnose severe but not moderate alcohol-associated hepatitis: A systematic review and meta-analysis.

BACKGROUND: The precision of clinical criteria and the utility of liver biopsy for diagnosis or prognosis remain unclear in patients with alcohol-associated hepatitis (AH). We systematically reviewed the literature to answer these questions. METHODS: Four databases were searched for studies describing the precision of clinical criteria (National Institute on Alcohol Abuse and Alcoholism, European Association for Study of Liver, or classical) and the role of histology in AH. The precision(positive predictive value) of criteria was pooled through random-effects meta-analysis, and its variation was investigated through subgroups and meta-regression of study-level factors with their percent contribution to variation (R2). The risk of bias among studies was evaluated through the QUADAS2 tool (PROSPERO-ID-CRD4203457250). RESULTS: Of 4320 studies, 18 in the systematic review and 15 (10/5: low/high risk of bias, N=1639) were included in the meta-analysis. The pooled precision of clinical criteria was 80.2% (95% CI: 69.7-89.7, I2:93%, p < 0.01), higher in studies with severe AH (mean-Model for End-Stage Liver Disease > 20) versus moderate AH (mean-Model for End-Stage Liver Disease < 20): 92% versus 67.1%, p < 0.01, and in studies with serum bilirubin cutoff 5 versus 3 mg/dL (88.5% vs.78.8%, p = 0.01). The factors contributing to variation in precision were Model for End-Stage Liver Disease (R2:72.7%), upper gastrointestinal bleed (R2:56.3%), aspartate aminotransferase:aspartate aminotransferase ratio (R2:100%), clinical criteria (R2:40.9%), bilirubin (R2:22.5%), and Mallory body on histology (R2:19.1%).The net inter-pathologist agreement for histologic findings of AH was variable (0.33-0.97), best among 2 studies describing AH through simple and uniform criteria, including steatosis, ballooning, and neutrophilic inflammation. Few studies reported the utility of histology in estimating steroid responsiveness (N = 1) and patient prognosis (N = 4); however, very broad septa, pericellular fibrosis, and cholestasis were associated with mortality. Bilirubinostasis was associated with infection in 1 study. CONCLUSIONS: Clinical criteria are reasonably precise for diagnosing severe AH, while there is an unmet need for better criteria for diagnosing moderate AH. Histologic diagnosis of AH should be simple and uniform.

Gradient-based and wavelet-based compressed sensing approaches for highly undersampled tomographic datasets.

Electron tomography is widely employed for the 3D morphological characterization at the nanoscale. In recent years, there has been a growing interest in analytical electron tomography (AET) as it is capable of providing 3D information about the elemental composition, chemical bonding and optical/electronic properties of nanomaterials. AET requires advanced reconstruction algorithms as the datasets often consist of a very limited number of projections. Total variation (TV)-based compressed sensing approaches were shown to provide high-quality reconstructions from undersampled datasets, but staircasing artefacts can appear when the assumption about piecewise constancy does not hold. In this paper, we compare higher-order TV and wavelet-based approaches for AET applications and provide an open-source Python toolbox, Pyetomo, containing 2D and 3D implementations of both methods. A highly sampled STEM-HAADF dataset of an Er-doped porous Si sample and a heavily undersampled STEM-EELS dataset of a Ge-rich GeSbTe (GST) thin film annealed at 450°C are used to evaluate the performance of the different approaches. We show that polynomial annihilation with order 3 (HOTV3) and the Bior4.4 wavelet outperform the classical TV minimization and the related Haar wavelet.

Supported Porous Nanostructures Developed by Plasma Processing of Metal Phthalocyanines and Porphyrins.

The large area scalable fabrication of supported porous metal and metal oxide nanomaterials is acknowledged as one of the greatest challenges for their eventual implementation in on-device applications. In this work, we will present a comprehensive revision and the latest results regarding the pioneering use of commercially available metal phthalocyanines and porphyrins as solid precursors for the plasma-assisted deposition of porous metal and metal oxide films and three-dimensional nanostructures (hierarchical nanowires and nanotubes). The most advanced features of this method relay on its ample general character from the point of view of the porous material composition and microstructure, mild deposition and processing temperature and energy constrictions and, finally, its straightforward compatibility with the direct deposition of the porous nanomaterials on processable substrates and device-architectures. Thus, taking advantage of the variety in the composition of commercially available metal porphyrins and phthalocyanines, we present the development of metal and metal oxides layers including Pt, CuO, Fe2O3, TiO2, and ZnO with morphologies ranging from nanoparticles to nanocolumnar films. In addition, we combine this method with the fabrication by low-pressure vapor transport of single-crystalline organic nanowires for the formation of hierarchical hybrid organic@metal/metal-oxide and @metal/metal-oxide nanotubes. We carry out a thorough characterization of the films and nanowires using SEM, TEM, FIB 3D, and electron tomography. The latest two techniques are revealed as critical for the elucidation of the inner porosity of the layers.

A field study of triclosan loss rates in river water (Cibolo Creek, TX).

Triclosan (TCS) is an anti-microbial agent used in down-the-drain consumer products. Following sewage treatment some of the triclosan will enter receiving waters. This study was designed to determine the die-away rate of triclosan released into a river as part of the sewage treatment plant effluent matrix. The study was conducted in Cibolo Creek, a moderate sized stream (discharge approximately 0.1 m(3)s(-1)) located in South Central Texas. Triclosan was analyzed from samples collected upstream of the sewage treatment plant, the sewage treatment plant effluent, and the river downstream from the effluent discharge. The first-order loss rate of parent triclosan from the water column was calculated from measured data (0.06 h(-1)) and this rate corresponded to a 76% reduction in triclosan over an 8 km river reach below the discharge. Mathematical modeling indicated that sorption and settling accounted for approximately 19% of total triclosan loss over 8 km. When removing sorption and settling, the remaining amount of triclosan had an estimated first-order loss rate of 0.25 h(-1). This loss rate was presumably due to other processes such as biodegradation and photolysis. These data show that loss of parent triclosan from the water column is rapid. Additional data are needed to fully document loss mechanisms.

Environmental fate of Triclosan in the River Aire Basin, UK.

The concentrations and removal rate of Triclosan, an antibacterial ingredient in consumer products, were measured at advanced trickling filter (TF) and activated sludge (AS) wastewater treatment plants (WWTPs) in the River Aire basin in the UK in September 2000. Additionally, the in-stream removal of Triclosan was measured directly in Mag Brook, the stream receiving the treated effluent from the TF plant, using a fluorescent dye tracer to determine the water plug travel times. The in-stream removal of the dissolved and un-ionized (i.e. bioavailable) fraction of the compound was measured using semipermeable membrane devices (SPMDs) deployed at various distances downstream from the WWTP discharge point. The estimated removal rates were used in the GREAT-ER (Geography-Referenced Regional Exposure Assessment Tool for European Rivers) model to predict the site-specific distribution of Triclosan concentrations in the Aire basin as well as to calculate regional concentrations. High WWTP (approximately 95%) and in-stream (0.21-0.33 h-1) removal rates of Triclosan in Mag Brook confirm that this chemical is rapidly eliminated from the aquatic environment.

Measurement of triclosan in wastewater treatment systems.

The objective of this study was to investigate the fate and removal of triclosan (TCS; 5-chloro-2-[2,4-dichloro-phenoxy]-phenol), an antimicrobial agent used in a variety of household and personal-care products, in wastewater treatment systems. This objective was accomplished by monitoring the environmental concentrations of TCS, higher chlorinated derivatives of TCS (4,5-dichloro-2-[2,4-dichloro-phenoxy]-phenol [tetra II]; 5,6-dichloro-2-[2,4-dichloro-phenoxy]-phenol [tetra III]; and 4,5,6-trichloro-2-(2,4-dichloro-phenoxy)-phenol [penta]), and a potential biotransformation by-product of TCS (5-chloro-2-[2,4-dicholoro-phenoxy]-anisole [TCS-OMe]) during wastewater treatment. These analytes were isolated from wastewater by using a C18 solid-phase extraction column and from sludge with supercritical fluid CO2. Once the analytes were isolated, they were derivatized to form trimethylsilylethers before quantitation by gas chromatography-mass spectrometry. Recovery of TCS from laboratory-spiked wastewater samples ranged from 79 to 88% for influent, 36 to 87% for final effluent, and 70 to 109% for primary sludge. Field concentrations of TCS in influent wastewater ranged from 3.8 to 16.6 microg/L and concentrations for final effluent ranged from 0.2 to 2.7 microg/L. Removal of TCS by activated-sludge treatment was approximately 96%, whereas removal by trickling-filter treatment ranged from 58 to 86%. The higher chlorinated tetra-II, tetra-III, and penta closans were below quantitation in all of the final effluent samples, except for one sampling event. Digested sludge concentrations of TCS ranged from 0.5 to 15.6 microg/g (dry wt), where the lowest value was from an aerobic digestion process and the highest value was from an anaerobic digestion process. Analysis of these results suggests that TCS is readily biodegradable under aerobic conditions, but not under anaerobic conditions. The higher chlorinated closans were near or below the limit of quantitation in all of the digested sludge samples. Based on results from this study, the chlorinated analogues and biotransformation by-product of TCS are expected to be very low in receiving waters and sludge-amended soils.