Colonic Hamartomatous Ganglioneuromatosis in a 4 Mo Old Puppy.

A 4 mo old male goldendoodle puppy was evaluated for chronic hematochezia with a history of recurrent rectal prolapse and tenesmus. A colo-colonic intussusception was diagnosed via abdominal imaging. Surgery was elected to reduce the intussusception, wherein a colonic mass was discovered. Colonic resection and anastomosis was performed, and the tissue were submitted for histopathological examination. The puppy was diagnosed with colonic hamartomatous ganglioneuromatosis based on the presence of markedly hyperplastic submucosal and myenteric plexi with infiltration and expansion of the mucosa and submucosa by Schwann cells and neuronal cell bodies. Ganglioneuromatosis is a rarely reported entity in the veterinary literature, and limited clinical follow up data is available for described cases. In humans, ganglioneuromatosis is associated with a PTEN genetic mutation, which confers increased susceptibility to the development of neoplasia of endocrine organs. Approximately 1 yr after the operation, this puppy appeared clinically normal with no abnormalities on repeated imaging. This case report describes the clinical presentation, surgical treatment, and histologic features of colonic hamartomatous ganglioneuromatosis with 1 yr postoperative clinical follow up data in a dog. Although uncommon, ganglioneuromatosis should be considered as a differential diagnosis list as a cause of gastrointestinal masses in puppies and young dogs.

Ex vivo biomechanical evaluation of a bone-screw-fastener for tibial plateau leveling osteotomy.

Introduction: The objective of this study was to investigate the effect of a novel screw type on stiffness and failure characteristics of a tibial plateau leveling osteotomy (TPLO) construct under cyclic loading conditions. The authors hypothesized that bone-screw-fasteners (BSF) would result in superior biomechanical stability compared with locking buttress screws (LBS). Materials and Methods: Twelve pairs of canine cadaveric pelvic limbs were included in this ex vivo biomechanical study. A TPLO was performed using a 3.5mm locking TPLO plate and stabilized using either LBS or BSF. Cyclic loading was performed for 30,000 cycles at 4Hz with a peak-load of 1000N (50N valley). The cyclic test was then continued by stepwise incremental increase of peak-load at a rate of 75N per 500 cycles until failure. Results: Cycles to failure for LBS (44,260 ± 5,770) and BSF (41,540 ± 7,686) were not significantly different (p = 0.36). Maximum force for LBS (3,134 ± 797N) and BSF (2,940 ± 831N) was not significantly different either (p = 0.58). Dynamic stiffness for LBS (1,778 ± 932 N/mm) and BSF (1,574 ± 677 N/mm) was not significantly different (p = 0.58). Discussion: Stabilization of the TPLO with BSF provided similar biomechanical stability under cyclic axial loading conditions as the LBS. BSF may be an acceptable alternative to traditional locking screws for TPLO.

Biomechanical Comparison of a Headless Compression Screw Fastener and AO Cortical Bone Screw for Fixation of a Simulated Equine Third Carpal Bone Slab Fracture.

Frontal plane slab fractures account for the majority of third carpal bone (C3) fractures in racing and performance horses. Recommended treatment is stabilization with a lagged AO cortical screw. Associated complications are fragment splitting, fragment spinning, and irritation of dorsal soft tissue structures. A novel, headless, cannulated screw with interlocking threads the Headless Compression Screw Fastener (HCSF) has been developed to resist multidirectional forces and bending moments; however, it has not been applied in the horse. Simulated C3 frontal plane slab fractures were created in nine paired carpi from equine cadaver limbs, fixed with either the HCSF or AO cortical bone screw, and loaded in shear to failure. The effect of screw type on stiffness, maximum load to failure, and yield load was assessed in separate linear mixed models. No significant (P< .05) difference between screw types was detected in terms of maximum load to failure (P= .084), stiffness (P= .26), or yield load (P= .088). Mode of failure was screw bending in all specimens. For some samples in both groups, failure was associated with the sagittal fracture at the screw-bone interface. The HCSF was successfully used to repair simulated third carpal bone fractures. The different head and thread pitches of the HCSF effectively compressed the fracture. The headless design eliminates the need for counter sinking. There was no significant difference in maximum load to failure, stiffness, nor yield load compared to the cortical screws. These results invite clinical application to be investigated.

Hydrophobically Modified Isosorbide Dimethacrylates as a Bisphenol-A (BPA)-Free Dental Filling Material.

A series of bio-based hydrophobically modified isosorbide dimethacrylates, with para-, meta-, and ortho- benzoate aromatic spacers (ISBGBMA), are synthesized, characterized, and evaluated as potential dental restorative resins. The new monomers, isosorbide 2,5-bis(4-glyceryloxybenzoate) dimethacrylate (ISB4GBMA), isosorbide 2,5-bis(3-glyceryloxybenzoate) dimethacrylate (ISB3GBMA), and isosorbide 2,5-bis(2-glyceryloxybenzoate) dimethacrylate (ISB2GBMA), are mixed with triethylene glycol dimethacrylate (TEGDMA) and photopolymerized. The resulting polymers are evaluated for the degree of monomeric conversion, polymerization shrinkage, water sorption, glass transition temperature, and flexural strength. Isosorbide glycerolate dimethacrylate (ISDGMA) is synthesized, and Bisphenol A glycerolate dimethacrylate (BisGMA) is prepared, and both are evaluated as a reference. Poly(ISBGBMA/TEGDMA) series shows lower water sorption (39-44 µg/mm3) over Poly(ISDGMA/TEGDMA) (73 µg/mm3) but higher than Poly(BisGMA/TEGDMA) (26 µg/mm3). Flexural strength is higher for Poly(ISBGBMA/TEGDMA) series (37-45 MPa) over Poly(ISDGMA/TEGDMA) (10 MPa) and less than Poly(BisGMA/TEGDMA) (53 MPa) after immersion in phosphate-buffered saline (DPBS) for 24 h. Poly(ISB2GBMA/TEGDMA) has the highest glass transition temperature at 85 °C, and its monomeric mixture has the lowest viscosity at 0.62 Pa·s, among the (ISBGBMA/TEGDMA) polymers and monomer mixtures. Collectively, this data suggests that the ortho ISBGBMA monomer is a potential bio-based, BPA-free replacement for BisGMA, and could be the focus for future study.

Applying Medical Device Informatics to Enable Safe and Secure Interoperable Systems: Medical Device Interface Data Sheets.

This article describes the concept of Medical Device Interface Data Sheets (MDIDSs) to document and characterize medical device interface data requirements, the processes for creating MDIDSs, and its role in supporting patient safety and cybersecurity of current systems while enabling innovation in the area of next-generation medical Internet of Things (IoT) platforms for integrating sensors, actuators, and applications (apps).

Respiratory Gas Analysis-Technical Aspects.

A technology-focused review of respiratory gas analysis, with an emphasis on carbon dioxide analysis, is presented. The measurement technologies deployed commercially are highlighted, and the basic principles and technical concerns of infrared spectroscopy and mainstream versus sidestream gas sampling are discussed. The specifications of particular interest to the clinician, accuracy and response time, and the related standard, with typical values for a capnometer, are presented. Representative time and volumetric capnograms are shown with the clinically relevant parameters described. Aspects of the terminology in present-day use and the need for clarity in defining what is a breath and an end-tidal value are reviewed. The applications of capnography of particular interest to the anesthesiologist are noted, and key references are provided. Ongoing developments with respect to respiratory gas analysis, and those that will impact it, are noted.

Spatiotemporal modeling of laser tissue soldering using photothermal nanocomposites.

OBJECTIVE: Laser tissue soldering using photothermal solders is a technology that facilitates rapid sealing using heat-induced changes in the tissue and the solder material. The solder material is made of gold nanorods embedded in a protein matrix patch that can be placed over the tissue rupture site and heated with a laser. Although laser tissue soldering is an attractive approach for surgical repair, potential photothermal damage can limit the success of this approach. Development of predictive mathematical models of photothermal effects including cell death, can lead to more efficient approaches in laser-based tissue repair. METHODS: We describe an experimental and modeling investigation into photothermal solder patches for sealing porcine and mouse cadaver intestine sections using near-infrared laser irradiation. Spatiotemporal changes in temperature were determined at the surface as well as various depths below the patch. A mathematical model, based on the finite element method, predicts the spatiotemporal temperature distribution in the patch and surrounding tissue, as well as concomitant cell death in the tissue is described. RESULTS: For both the porcine and mouse intestine systems, the model predicts temperatures that are quantitatively similar to the experimental measurements with the model predictions of temperature increase often being within a just a few degrees of experimental measurements. CONCLUSION: This mathematical model can be employed to identify optimal conditions for minimizing healthy cell death while still achieving a strong seal of the ruptured tissue using laser soldering. Lasers Surg. Med. 50:143-152, 2018. © 2017 Wiley Periodicals, Inc.

Three-dimensional piezoelectric fibrous scaffolds selectively promote mesenchymal stem cell differentiation.

The discovery of electric fields in biological tissues has led to efforts in developing technologies utilizing electrical stimulation for therapeutic applications. Native tissues, such as cartilage and bone, exhibit piezoelectric behavior, wherein electrical activity can be generated due to mechanical deformation. Yet, the use of piezoelectric materials have largely been unexplored as a potential strategy in tissue engineering, wherein a piezoelectric biomaterial acts as a scaffold to promote cell behavior and the formation of large tissues. Here we show, for the first time, that piezoelectric materials can be fabricated into flexible, three-dimensional fibrous scaffolds and can be used to stimulate human mesenchymal stem cell differentiation and corresponding extracellular matrix/tissue formation in physiological loading conditions. Piezoelectric scaffolds that exhibit low voltage output, or streaming potential, promoted chondrogenic differentiation and piezoelectric scaffolds with a high voltage output promoted osteogenic differentiation. Electromechanical stimulus promoted greater differentiation than mechanical loading alone. Results demonstrate the additive effect of electromechanical stimulus on stem cell differentiation, which is an important design consideration for tissue engineering scaffolds. Piezoelectric, smart materials are attractive as scaffolds for regenerative medicine strategies due to their inherent electrical properties without the need for external power sources for electrical stimulation.

Capturing Essential Information to Achieve Safe Interoperability.

In this article, we describe the role of "clinical scenario" information to assure the safety of interoperable systems, as well as the system's ability to deliver the requisite clinical functionality to improve clinical care. Described are methods and rationale for capturing the clinical needs, workflow, hazards, and device interactions in the clinical environment. Key user (clinician and clinical engineer) needs and system requirements can be derived from this information, therefore, improving the communication from clinicians to medical device and information technology system developers. This methodology is intended to assist the health care community, including researchers, standards developers, regulators, and manufacturers, by providing clinical definition to support requirements in the systems engineering process, particularly those focusing on development of Integrated Clinical Environments described in standard ASTM F2761. Our focus is on identifying and documenting relevant interactions and medical device capabilities within the system using a documentation tool called medical device interface data sheets and mitigating hazardous situations related to workflow, product usability, data integration, and the lack of effective medical device-health information technology system integration to achieve safe interoperability. Portions of the analysis of a clinical scenario for a "patient-controlled analgesia safety interlock" are provided to illustrate the method. Collecting better clinical adverse event information and proposed solutions can help identify opportunities to improve current device capabilities and interoperability and support a learning health system to improve health care delivery. Developing and analyzing clinical scenarios are the first steps in creating solutions to address vexing patient safety problems and enable clinical innovation. A Web-based research tool for implementing a means of acquiring and managing this information, the Clinical Scenario Repository™ (MD PnP Program), is described.

Using the features of the time and volumetric capnogram for classification and prediction.

Quantitative features derived from the time-based and volumetric capnogram such as respiratory rate, end-tidal PCO2, dead space, carbon dioxide production, and qualitative features such as the shape of capnogram are clinical metrics recognized as important for assessing respiratory function. Researchers are increasingly exploring these and other known physiologically relevant quantitative features, as well as new features derived from the time and volumetric capnogram or transformations of these waveforms, for: (a) real-time waveform classification/anomaly detection, (b) classification of a candidate capnogram into one of several disease classes, (c) estimation of the value of an inaccessible or invasively determined physiologic parameter, (d) prediction of the presence or absence of disease condition, (e) guiding the administration of therapy, and (f) prediction of the likely future morbidity or mortality of a patient with a presenting condition. The work to date with respect to these applications will be reviewed, the underlying algorithms and performance highlighted, and opportunities for the future noted.

The Need to Apply Medical Device Informatics in Developing Standards for Safe Interoperable Medical Systems.

Medical device and health information technology systems are increasingly interdependent with users demanding increased interoperability. Related safety standards must be developed taking into account these systems' perspective. In this article, we describe the current development of medical device standards and the need for these standards to address medical device informatics. Medical device information should be gathered from a broad range of clinical scenarios to lay the foundation for safe medical device interoperability. Five clinical examples show how medical device informatics principles, if applied in the development of medical device standards, could help facilitate the development of safe interoperable medical device systems. These examples illustrate the clinical implications of the failure to capture important signals and device attributes. We provide recommendations relating to the coordination between historically separate standards development groups, some of which focus on safety and effectiveness and others focus on health informatics. We identify the need for a shared understanding among stakeholders and describe organizational structures to promote cooperation such that device-to-device interactions and related safety information are considered during standards development.

The Importance of State and Context in Safe Interoperable Medical Systems.

This paper describes why "device state" and "patient context" information are necessary components of device models for safe interoperability. This paper includes a discussion of the importance of describing the roles of devices with respect to interactions (including human user workflows involving devices, and device to device communication) within a system, particularly those intended for use at the point-of-care, and how this role information is communicated. In addition, it describes the importance of clinical scenarios in creating device models for interoperable devices.

Sleep, Sleep Disorders, and Mild Traumatic Brain Injury. What We Know and What We Need to Know: Findings from a National Working Group.

Disturbed sleep is one of the most common complaints following traumatic brain injury (TBI) and worsens morbidity and long-term sequelae. Further, sleep and TBI share neurophysiologic underpinnings with direct relevance to recovery from TBI. As such, disturbed sleep and clinical sleep disorders represent modifiable treatment targets to improve outcomes in TBI. This paper presents key findings from a national working group on sleep and TBI, with a specific focus on the testing and development of sleep-related therapeutic interventions for mild TBI (mTBI). First, mTBI and sleep physiology are briefly reviewed. Next, essential empirical and clinical questions and knowledge gaps are addressed. Finally, actionable recommendations are offered to guide active and efficient collaboration between academic, industry, and governmental stakeholders.