ABSTRACT
One of the outcomes from the global COVID-19 pandemic caused by SARS-CoV-2 has been an acceleration of development timelines to provide treatments in a timely manner. For example, it has recently been demonstrated that the development of monoclonal antibody therapeutics from vector construction to IND submission can be achieved in five to six months rather than the traditional ten-to-twelve-month timeline using CHO cells [1], [2]. This timeline is predicated on leveraging existing, robust platforms for upstream and downstream processes, analytical methods, and formulation. These platforms also reduce; the requirement for ancillary studies such as cell line stability, or long-term product stability studies. Timeline duration was further reduced by employing a transient cell line for early material supply and using a stable cell pool to manufacture toxicology study materials. The development of non-antibody biologics utilizing traditional biomanufacturing processes in CHO cells within a similar timeline presents additional challenges, such as the lack of platform processes and additional analytical assay development. In this manuscript, we describe the rapid development of a robust and reproducible process for a two-component self-assembling protein nanoparticle vaccine for SARS-CoV-2. Our work has demonstrated a successful academia-industry partnership model that responded to the COVID-19 global pandemic quickly and efficiently and could improve our preparedness for future pandemic threats.
ABSTRACT
A survey performed by the AAPS Drug Product Handling community revealed a general, mostly consensus, approach to the strategy for the selection of surfactant type and level for biopharmaceutical products. Discussing and building on the survey results, this article describes the common approach for surfactant selection and control strategy for protein-based therapeutics and focuses on key studies, common issues, mitigations, and rationale. Where relevant, each section is prefaced by survey responses from the 22 anonymized respondents. The article format consists of an overview of surfactant stabilization, followed by a strategy for the selection of surfactant level, and then discussions regarding risk identification, mitigation, and control strategy. Since surfactants that are commonly used in biologic formulations are known to undergo various forms of degradation, an effective control strategy for the chosen surfactant focuses on understanding and controlling the design space of the surfactant material attributes to ensure that the desired material quality is used consistently in DS/DP manufacturing. The material attributes of a surfactant added in the final DP formulation can influence DP performance (e.g., protein stability). Mitigation strategies are described that encompass risks from host cell proteins (HCP), DS/DP manufacturing processes, long-term storage, as well as during in-use conditions.
Subject(s)
Excipients , Surface-Active Agents , Protein Stability , LipoproteinsABSTRACT
Protein-based biologic drugs encounter a variety of stress factors during drug substance (DS) and drug product (DP) manufacturing, and the subsequent steps that result in clinical administration by the end user. This article is the third in a series of commentaries on these stress factors and their effects on biotherapeutics. It focuses on assessing the potential negative impact from primary packaging, transportation, and handling on the quality of the DP. The risk factors include ingress of hazardous materials such as oxidizing residuals from the sterilization process, delamination- or rubber stopper-derived particles, silicone oil droplets, and leachables into the formulation, as well as surface interactions between the protein and packaging materials, all of which may cause protein degradation. The type of primary packaging container used (such as vials and prefilled syringes) may substantially influence the impact of transportation and handling stresses on DP Critical Quality Attributes (CQAs). Mitigations via process development and robustness studies as well as control strategies for DP CQAs are discussed, along with current industry best practices for scale-down and in-use stability studies. We conclude that more research is needed on postproduction transportation and handling practices and their implications for protein DP quality.
Subject(s)
Drug Packaging , Rubber , Pharmaceutical Preparations , Proteins , Sterilization , SyringesABSTRACT
Closed system transfer devices (CSTDs) have been used with hazardous drugs for several decades. The goal of this whitepaper is to increase awareness among healthcare professionals, device manufacturers, regulators, and pharmaceutical/biotech companies on the potential issues around the use of CSTDs with biologic drug products to allow their informed use in clinics. Specifically, we discuss the key topics related to the use of CSTDs with biologics products, including components and materials of construction, a breakdown of regulatory, technical, clinical site-related risks and challenges associated with the use of CSTDs with biological products, gathered from stakeholder discussion at the IQ CSTD workshop, and considerations on current testing requirements and communication strategies to drive further dialog on the appropriate use of CSTDs. Given the technical challenges of using CSTDs with biologics, coupled with the current regulations surrounding CSTD approval and proper use, as well as a need for alignment and standardization to enable a consistent strategy for compatibility testing and communication of incompatibilities, it is recommended that global health authorities and other stakeholders seek to understand these issues, in order to alleviate these problems and keep healthcare workers and patients safe from harm.
Subject(s)
Biological Products , Occupational Exposure , Communication , Delivery of Health Care , Health Personnel , HumansABSTRACT
Hazardous drug is a common term used by the National Institute of Occupational Health and Safety (NIOSH) to classify medications that may induce adverse mutagenic and reproductive responses in health care personnel. NIOSH publishes a list of drugs it defines as hazardous where it may be appropriate for health care workers to take protective measures to reduce the potential for occupational exposure. Recent updates and proposed updates to this list have included large molecule biological products with oncology indications. Both NIOSH and USP <800> recommend the use of closed system transfer devices (CSTDs) during compounding. CSTDs are required for administration of prepared solution in NIOSH. However, USP has suggested that the principles of <800> are broadly applicable to hazardous drug handling activities across all facility types. USP encourages the widespread adoption and use of <800> across all health care settings, which many health care workers have interpreted beyond compounding to include administration and preparation of conventionally manufactured sterile products per approved labeling. Although the use of CSTDs may reduce exposure of health care personnel to chemotherapy agents in health care setting, the impact of CSTDs on quality of biologic drug products, including monoclonal antibodies and other proteins, is not fully understood. To complicate this issue further, there are several commercially available CSTDs in the market which have different fluid paths and material of construction that comes in contact with the drug. Testing every combination of CSTD and drug product for potential incompatibilities can be a labor intensive and impractical approach and cause delay in getting essential drugs to patients. A panel discussion was held at a recent American Association of Pharmaceutical Scientists 2018 PharmSci 360 conference to discuss the impact of CSTDs on biologics. Impact on subvisible and visible particulates and impact to other product quality attributes such as high molecular weight species formation upon contact with CSTDs were reported in American Association of Pharmaceutical Scientists meeting. Impact to deliverable dose, holdup volumes of various CSTDs, and stopper coring were also reported that has significant impact to patient safety. Given the fact that USP chapter <800> will be implemented in December 2019, feedback from health authorities regarding the use of CSTDs for biological drug products is needed to provide an appropriate risk/benefit balance to ensure patient safety and quality of the biologic drug product while also protecting the health care worker and the environment. The purpose of this commentary is to provide an industry perspective on the challenges during the use of CSTDs for biologic drug products and is intended to raise caution and awareness on the benefits and shortcomings of these devices.
Subject(s)
Antibodies, Monoclonal , Antineoplastic Agents/standards , Biological Products/standards , Drug Compounding/standards , Drug Industry/standards , Occupational Exposure/prevention & control , Antibodies, Monoclonal/adverse effects , Antineoplastic Agents/adverse effects , Biological Products/adverse effects , Drug Compounding/methods , Drug Industry/methods , Humans , Protective Devices/standardsABSTRACT
Site-directed spin labeling electron paramagnetic resonance (SDSL EPR) spectroscopy is a powerful tool to determine solvent accessibility, side-chain dynamics, and inter-spin distances at specific sites in biological macromolecules. This information provides important insights into the structure and dynamics of both natural and designed proteins and protein complexes. Here, we discuss the application of SDSL EPR spectroscopy in probing the charge-transfer cofactors in photosynthetic reaction centers (RC) such as photosystem I (PSI) and the bacterial reaction center (bRC). Photosynthetic RCs are large multi-subunit proteins (molecular weight≥300 kDa) that perform light-driven charge transfer reactions in photosynthesis. These reactions are carried out by cofactors that are paramagnetic in one of their oxidation states. This renders the RCs unsuitable for conventional nuclear magnetic resonance spectroscopy investigations. However, the presence of native paramagnetic centers and the ability to covalently attach site-directed spin labels in RCs makes them ideally suited for the application of SDSL EPR spectroscopy. The paramagnetic centers serve as probes of conformational changes, dynamics of subunit assembly, and the relative motion of cofactors and peptide subunits. In this review, we describe novel applications of SDSL EPR spectroscopy for elucidating the effects of local structure and dynamics on the electron-transfer cofactors of photosynthetic RCs. Because SDSL EPR Spectroscopy is uniquely suited to provide dynamic information on protein motion, it is a particularly useful method in the engineering and analysis of designed electron transfer proteins and protein networks. This article is part of a Special Issue entitled Biodesign for Bioenergetics--the design and engineering of electronic transfer cofactors, proteins and protein networks, edited by Ronald L. Koder and J.L. Ross Anderson.
Subject(s)
Catalytic Domain , Electron Transport Chain Complex Proteins/chemistry , Photosynthesis , Protein Engineering/methods , Spin Labels , Animals , Catalytic Domain/genetics , Electron Spin Resonance Spectroscopy/methods , Electron Transport/genetics , Electron Transport Chain Complex Proteins/genetics , Humans , Models, Molecular , Mutagenesis, Site-Directed/methods , Photosynthesis/genetics , Photosystem I Protein Complex/chemistry , Photosystem I Protein Complex/genetics , Photosystem I Protein Complex/metabolismABSTRACT
A fundamental question in protein folding is whether proteins fold through one or multiple trajectories. While most experiments indicate a single pathway, simulations suggest proteins can fold through many parallel pathways. Here, we use a combination of chemical denaturant, mechanical force and site-directed mutations to demonstrate the presence of multiple unfolding pathways in a simple, two-state folding protein. We show that these multiple pathways have structurally different transition states, and that seemingly small changes in protein sequence and environment can strongly modulate the flux between the pathways. These results suggest that in vivo, the crowded cellular environment could strongly influence the mechanisms of protein folding and unfolding. Our study resolves the apparent dichotomy between experimental and theoretical studies, and highlights the advantage of using a multipronged approach to reveal the complexities of a protein's free-energy landscape.
Subject(s)
Protein Denaturation , Protein Unfolding , src Homology Domains , src-Family Kinases/chemistry , Animals , Chickens , Mutagenesis, Site-Directed , Optical TweezersABSTRACT
The recent revolution in optics and instrumentation has enabled the study of protein folding using extremely low mechanical forces as the denaturant. This exciting development has led to the observation of the protein folding process at single molecule resolution and its response to mechanical force. Here, we describe the principles and experimental details of force spectroscopy on proteins, with a focus on the optical tweezers instrument. Several recent results will be discussed to highlight the importance of this technique in addressing a variety of questions in the protein folding field.
Subject(s)
Protein Folding , Proteins , Microscopy, Atomic Force , Optical Tweezers , Proteins/chemistry , Spectrum AnalysisABSTRACT
Many biological processes generate force, and proteins have evolved to resist and respond to tension along different force axes. Single-molecule force spectroscopy allows for molecular insight into the behavior of proteins under force and the mechanism of protein folding in general. Here, we have used src SH3 to investigate the effect of different pulling axes under the low-force regime afforded by an optical trap. We find that this small cooperatively folded protein shows an anisotropic response to force; the protein is more mechanically resistant to force applied along a longitudinal axis compared to force applied perpendicular to the terminal ß strand. In the longitudinal axis, we observe an unusual biphasic behavior revealing a force-induced switch in the unfolding mechanism suggesting the existence of two parallel unfolding pathways. A site-specific variant can selectively affect one of these pathways. Thus, even this simple two-state protein demonstrates a complex mechanical unfolding trajectory, accessing multiple unfolding pathways under the low-force regime of the optical trap; the specific unfolding pathway depends on the perturbation axis and the applied force.
Subject(s)
Protein Folding , Proteins/chemistryABSTRACT
The assembly of the PsaC subunit in the photosystem I (PS I) complex was studied using site-specific spin labeling electron paramagnetic resonance (EPR) spectroscopic techniques. The binding was monitored from the perspective of a reporter spin label attached to either the native C34(C) or the engineered C75(C) residue of wild-type PsaC (PsaC(WT)). Three distinct stages of PsaC assembly were analyzed: unbound PsaC, the P(700)-F(X)/PsaC complex, and the P(700)-F(X)/PsaC/PsaD complex. The changes in the EPR spectral line shape and the rotational correlation time of the spin label when PsaC(WT) binds to the PS I core are consistent with the conformational changes that are expected to occur during the assembly process. The addition of the PsaD subunit to the P(700)-F(X)/PsaC(WT-C34) complex induces further EPR spectral changes, which indicate that the presence of PsaD affects the orientation of the PsaC subunit on the PS I core. The binding of several PsaC variants, each lacking one or more key binding contacts with the PsaA/PsaB heterodimer, was monitored using a reporter spin label at C34(C). Our results indicate that the absence of the PsaC-PsaA/PsaB binding contacts causes PsaC to bind in an altered configuration on the PS I core. In particular, the removal of the entire C-terminus (PsaC(C-term)) causes PsaC to dock in a significantly different orientation when compared to the wild-type protein, as indicated by the EPR spectrum of the P(700)-F(X)/PsaC(C-term-C34) complex. Because the PsaC(C-term) variant retains only the symmetric network of PsaC-PsaA/PsaB ionic contacts, the altered EPR spectrum could, in principle, reflect a fraction of reaction centers that contain PsaC bound in the 180 degrees-rotated, C(2)-symmetry-related configuration. The results of this study are used to provide a comprehensive, stepwise mechanism for the binding of PsaC on the PS I core.
Subject(s)
Membrane Proteins/metabolism , Photosynthesis , Photosystem I Protein Complex/metabolism , Protein Multimerization , Protein Subunits/metabolism , Spin Labels , Binding Sites , Electron Spin Resonance Spectroscopy , Membrane Proteins/chemistry , Membrane Proteins/genetics , Models, Molecular , Mutagenesis, Site-Directed , Mutation , Nuclear Magnetic Resonance, Biomolecular , Photosystem I Protein Complex/chemistry , Photosystem I Protein Complex/genetics , Protein Binding , Protein Structure, Quaternary , Protein Subunits/chemistry , Protein Subunits/genetics , Substrate Specificity , Synechococcus/enzymologyABSTRACT
The PsaC subunit of Photosystem I (PS I) is tightly bound to the PsaA/PsaB heterodimer via an extensive network of ionic and hydrogen bonds. To improve our understanding of the design of the PsaC-PsaA/PsaB binding interface, variants of PsaC were generated, each lacking a key binding contact with the PsaA/PsaB heterodimer. The characteristics of the reconstituted, variant PS I complexes were monitored by time-resolved optical spectroscopy, low-temperature EPR spectroscopy, and electron transfer throughput measurements. In the absence of the ionic bond forming contacts R52(C) or R65(C), a markedly slower charge recombination occurs between P(700)(+) and [F(A)/F(B)](-). The addition of PsaD leads to the restoration of native recombination kinetics in a fraction of the PS I complexes reconstituted with R52A(C), but not with R65A(C). Contrary to expectation, the absence of Y80(C), which forms two symmetry-breaking H-bonds with PsaB, does not significantly affect the binding of PsaC as judged by the rate of charge recombination between P(700)(+) and [F(A)/F(B)](-). However, the removal of the entire C-terminus results in a dramatic decrease in the rate of charge recombination. Low-temperature EPR spectra of the variant PS I complexes indicate that the magnetic environments of F(A) and F(B) are altered when compared to that of native PS I. The slowing of the rate of charge recombination in the variant PS I complexes could be due to an increase in the distance between F(X) and F(A)/F(B) as the result of non-native binding or to an altered reduction potential of the iron-sulfur clusters, which would result in a different rate of thermalization up the electron acceptor chain. The most significant finding is that the variant PS I complexes support lower rates of light-induced flavodoxin reduction and that the rates deteriorate rapidly on exposure to dioxygen due to the degradation of F(A) and F(B). We suggest that the extensive set of ionic bonds and H-bonds between PsaC and the PsaA/PsaB heterodimer has evolved to ensure an exceedingly tight binding interface, thereby rendering the [4Fe-4S] clusters in PsaC inaccessible to dioxygen at the onset of oxygenic photosynthesis.
Subject(s)
Bacterial Proteins/chemistry , Photosystem I Protein Complex/chemistry , Binding Sites , Hydrogen Bonding , Kinetics , Models, Molecular , Oxygen/metabolism , Photosystem I Protein Complex/metabolism , Protein Conformation , Synechococcus/metabolism , TemperatureABSTRACT
The photosynthetic reaction center from the green sulfur bacterium Chlorobium tepidum (CbRC) was solubilized from membranes using Triton X-100 and isolated by sucrose density ultra-centrifugation. The CbRC complexes were subsequently treated with 0.5 M NaCl and ultrafiltered over a 100 kDa cutoff membrane. The resulting CbRC cores did not exhibit the low-temperature EPR resonances from FA- and FB- and were unable to reduce NADP+. SDS-PAGE and mass spectrometric analysis showed that the PscB subunit, which harbors the FA and FB clusters, had become dissociated, and was now present in the filtrate. Attempts to rebind PscB onto CbRC cores were unsuccessful. Mössbauer spectroscopy showed that recombinant PscB contains a heterogeneous mixture of [4Fe-4S]2+,1+ and other types of Fe/S clusters tentatively identified as [2Fe-2S]2+,1+ clusters and rubredoxin-like Fe3+,2+ centers, and that the [4Fe-4S]2+,1+ clusters which were present were degraded at high ionic strength. Quantitative analysis confirmed that the amount of iron and sulfide in the recombinant protein was sub-stoichiometric. A heme-staining assay indicated that cytochrome c551 remained firmly attached to the CbRC cores. Low-temperature EPR spectroscopy of photoaccumulated CbRC complexes and CbRC cores showed resonances between g=5.4 and 4.4 assigned to a S=3/2 ground spin state [4Fe-4S]1+ cluster and at g=1.77 assigned to a S=1/2 ground spin state [4Fe-4S]1+ cluster, both from FX-. These results unify the properties of the acceptor side of the Type I homodimeric reaction centers found in green sulfur bacteria and heliobacteria: in both, the FA and FB iron-sulfur clusters are present on a salt-dissociable subunit, and FX is present as an interpolypeptide [4Fe-4S]2+,1+ cluster with a significant population in a S=3/2 ground spin state.
Subject(s)
Bacterial Proteins/metabolism , Chlorobium/metabolism , Iron-Sulfur Proteins/metabolism , Photosynthetic Reaction Center Complex Proteins/metabolism , Protein Multimerization , Bacterial Proteins/isolation & purification , Electron Spin Resonance Spectroscopy , Electrons , Photosynthetic Reaction Center Complex Proteins/isolation & purification , Recombinant Proteins/metabolism , Spectroscopy, MossbauerABSTRACT
Electrostatic calculations have predicted that the partial negative charge associated with D575PsaB plays a significant role in modulating the midpoint potentials of the A1A and A1B phylloquinones in photosystem I. To test this prediction, the side chain of residue 575PsaB was changed from negatively charged (D) to neutral (A) and to positively charged (K). D566PsaB, which is located at a considerable distance from either A1A or A1B, and should affect primarily the midpoint potential of FX, was similarly changed. In the 575PsaB variants, the rate of electron transfer from A1A to FX is observed to decrease slightly according to the sequence D/A/K. In the 566PsaB variants, the opposite effect of a slight increase in the rate is observed according to the same sequence D/A/K. These results are consistent with the expectation that changing these residues will shift the midpoint potentials of nearby cofactors to more positive values and that the magnitude of this shift will depend on the distance between the cofactors and the residues being changed. Thus, the midpoint potentials of A1A and A1B should experience a larger shift than will FX in the 575PsaB variants, while FX should experience a larger shift than will either A1A or A1B in the 566PsaB variants. As a result, the driving energy for electron transfer from A1A and A1B to FX will be decreased in the former and increased in the latter. This rationalization of the changes in kinetics is compared with the results of electrostatic calculations. While the altered amino acids shift the midpoint potentials of A1A, A1B, and FX by different amounts, the difference in the shifts between A1A and FX or between A1B and FX is small so that the overall effect on the electron transfer rate between A1A and FX or between A1B and FX is predicted to be small. These conclusions are borne out by experiment.