Microparticles as Viral RNA Carriers from Stool for Stable and Sensitive Surveillance.

Since its discovery, polymerase chain reaction (PCR) has emerged as an important technology for the diagnosis and identification of infectious diseases. It is a highly sensitive and reliable nucleic acids (NA) detection tool for various sample types. However, stool, which carries the most abundant micro-organisms and physiological byproducts, remains to be the trickiest clinical specimen for molecular detection of pathogens. Herein, we demonstrate the novel application of hydrogel microparticles as carriers of viral RNA from stool samples without prior RNA purification for real-time polymerase chain reaction (qPCR). In each microparticle of primer-incorporated network (PIN) as a self-sufficient reaction compartment, immobilized reverse transcription (RT) primers capture the viral RNA by hybridization and directly initiate RT of RNA to generate a pool of complementary DNA (PIN-cDNA pool). Through a simple operation with a portable thermostat device, a PIN-cDNA pool for influenza A virus (IAV) was obtained in 20 min. The PIN-cDNA pools can be stored at room temperature, or directly used to deliver cDNA templates for qPCR. The viral cDNA templates were freely released in the subsequent qPCR to allow amplification efficiency of over 91%. The assay displayed good linearity, repeatability, and comparable limit of detection (LoD) with a commercialized viral RNA purification kit. As a proof of concept, this technology carries a huge potential for onsite application to improve human and animal infectious disease surveillance activities using stool samples without the need for a laboratory or centrifuge for sample preparation.

Probe-Free Identification of RNA Virus Variants with Point Mutations by Surface-Enhanced Raman Spectroscopy.

As observed in the COVID-19 pandemic, RNA viruses continue to rapidly evolve through mutations. In the absence of effective therapeutics, early detection of new severely pathogenic viruses and quarantine of infected people are critical for reducing the spread of the viral infections. However, conventional detection methods require a substantial amount of time to develop probes specific to new viruses, thereby impeding immediate response to the emergence of viral pathogens. In this study, we identified multiple types of viruses by obtaining the spectral fingerprint of their surface proteins with probe-free surface-enhanced Raman scattering (SERS). In addition, the SERS-based method can remarkably distinguish influenza virus variants with several surface protein point mutations from their parental strain. Principal component analysis (PCA) of the SERS spectra systematically captured the key Raman bands to distinguish the variants. Our results show that the combination of SERS and PCA can be a promising tool for rapid detection of newly emerging mutant viruses without a virus-specific probe.

TLR3 forms a highly organized cluster when bound to a poly(I:C) RNA ligand.

Toll-like Receptor 3 (TLR3) initiates a potent anti-viral immune response by binding to double-stranded RNA ligands. Previous crystallographic studies showed that TLR3 forms a homodimer when bound to a 46-base pair RNA ligand. However, this short RNA fails to initiate a robust immune response. To obtain structural insights into the length dependency of TLR3 ligands, we determine the cryo-electron microscopy structure of full-length TLR3 in a complex with a synthetic RNA ligand with an average length of ~400 base pairs. In the structure, the dimeric TLR3 units are clustered along the double-stranded RNA helix in a highly organized and cooperative fashion with a uniform inter-dimer spacing of 103 angstroms. The intracellular and transmembrane domains are dispensable for the clustering because their deletion does not interfere with the cluster formation. Our structural observation suggests that ligand-induced clustering of TLR3 dimers triggers the ordered assembly of intracellular signaling adaptors and initiates a robust innate immune response.

Engineering Genetic Systems for Treating Mitochondrial Diseases.

Mitochondria are intracellular energy generators involved in various cellular processes. Therefore, mitochondrial dysfunction often leads to multiple serious diseases, including neurodegenerative and cardiovascular diseases. A better understanding of the underlying mitochondrial dysfunctions of the molecular mechanism will provide important hints on how to mitigate the symptoms of mitochondrial diseases and eventually cure them. In this review, we first summarize the key parts of the genetic processes that control the physiology and functions of mitochondria and discuss how alterations of the processes cause mitochondrial diseases. We then list up the relevant core genetic components involved in these processes and explore the mutations of the components that link to the diseases. Lastly, we discuss recent attempts to apply multiple genetic methods to alleviate and further reverse the adverse effects of the core component mutations on the physiology and functions of mitochondria.

Molecular-Level Interactions between Engineered Materials and Cells.

Various recent experimental observations indicate that growing cells on engineered materials can alter their physiology, function, and fate. This finding suggests that better molecular-level understanding of the interactions between cells and materials may guide the design and construction of sophisticated artificial substrates, potentially enabling control of cells for use in various biomedical applications. In this review, we introduce recent research results that shed light on molecular events and mechanisms involved in the interactions between cells and materials. We discuss the development of materials with distinct physical, chemical, and biological features, cellular sensing of the engineered materials, transfer of the sensing information to the cell nucleus, subsequent changes in physical and chemical states of genomic DNA, and finally the resulting cellular behavior changes. Ongoing efforts to advance materials engineering and the cell-material interface will eventually expand the cell-based applications in therapies and tissue regenerations.

Attomolar detection of virus by liquid coplanar-gate graphene transistor on plastic.

The direct method of detecting a virus with extremely low concentration is recommended for the diagnosis of viral disease. In this study, coplanar-gate graphene field-effect transistors (GFETs) were built on flexible polyethylene terephthalate substrates for the attomolar detection of a virus. The GFETs exhibited a very low detection limit of 47.8 aM with relatively low source/drain voltage due to aqueous dielectric media which stabilizes viruses and antibodies for specific bonding. The antibody as a probe molecule was decorated on a graphene surface using 1-pyrenebutanoic acid succinimidyl ester that had previously been immobilized on a graphene surface. The Dirac point voltage shifted downward after dropping the virus solution, due to the electrostatic gating effect of graphene in the antigen (namely, virus)-antibody complex. The virus detection platform used in this study is expected to be beneficial for direct diagnosis in saline environments, since the performances of GFETs were not significantly affected by the presence of Na+ and Cl-. Furthermore, since our flexible and transparent virus sensors can be used in a wearable device, they provide a simple and fast method for diagnosing viruses.

Nanotopography-based engineering of retroviral DNA integration patterns.

Controlling the interactions between cells and viruses is critical for treating infected patients, preventing viral infections, and improving virus-based therapeutics. Chemical methods using small molecules and biological methods using proteins and nucleic acids are employed for achieving this control, albeit with limitations. We found, for the first time, that retroviral DNA integration patterns in the human genome, the result of complicated interactions between cells and viruses, can be engineered by adapting cells to the defined nanotopography of silica bead monolayers. Compared with cells on a flat glass surface, cells on beads with the highest curvature harbored retroviral DNAs at genomic sites near transcriptional start sites and CpG islands during infections at more than 50% higher frequencies. Furthermore, cells on the same type of bead layers contained retroviral DNAs in the genomic regions near cis-regulatory elements at frequencies that were 2.6-fold higher than that of cells on flat glass surfaces. Systems-level genetic network analysis showed that for cells on nanobeads with the highest curvature, the genes that would be affected by cis-regulatory elements near the retroviral integration sites perform biological functions related to chromatin structure and antiviral activities. Our unexpected observations suggest that novel engineering approaches based on materials with specific nanotopography can improve control over viral events.

Recent Advances in Mitochondria-Targeted Gene Delivery.

Mitochondria are the energy-producing organelles of cells. Mitochondrial dysfunctions link to various syndromes and diseases including myoclonic epilepsy and ragged-red fiber disease (MERRF), Leigh syndrome (LS), and Leber hereditary optic neuropathy (LHON). Primary mitochondrial diseases often result from mutations of mitochondrial genomes and nuclear genes that encode the mitochondrial components. However, complete intracellular correction of the mutated genetic parts relevant to mitochondrial structures and functions is technically challenging. Instead, there have been diverse attempts to provide corrected genetic materials with cells. In this review, we discuss recent novel physical, chemical and biological strategies, and methods to introduce genetic cargos into mitochondria of eukaryotic cells. Effective mitochondria-targeting gene delivery systems can reverse multiple mitochondrial disorders by enabling cells to produce functional mitochondrial components.

Reliable RT-qPCR-based titration of retroviral and lentiviral vectors via quantification of residual vector plasmid DNA in samples.

OBJECTIVES: To develop a method for reliable quantification of viral vectors, which is necessary for determining the optimal dose of vector particles in clinical trials to obtain the desired effects without severe unwanted immune responses. RESULTS: A significant level of vector plasmid remained in retroviral and lentiviral vector samples, which led to overestimation of viral titers when using the conventional RT-qPCR-based genomic titration method. To address this problem, we developed a new method in which the residual plasmid was quantified by an additional RT-qPCR step, and standard molecules and primer sets were optimized. The obtained counts were then used to correct the conventionally measured genomic titers of viral samples. While the conventional method produced significantly higher genomic titers for mutant retroviral vectors than for wild-type vectors, our method produced slightly higher or equivalent titers, corresponding with the general idea that mutation of viral components mostly results in reduced or, at best, retained titers. CONCLUSION: Subtraction of the number of residual vector plasmid molecules from the conventionally measured genomic titer can yield reliable quantification of retroviral and lentiviral vector samples, a prerequisite to advancing the safety of gene therapy applications.

Identification of Newly Emerging Influenza Viruses by Surface-Enhanced Raman Spectroscopy.

In this work, we demonstrate in situ virus identification based on surface-enhanced Raman scattering (SERS). We hypothesized that newly emerging influenza viruses possess surface proteins and lipids that can generate distinctive Raman signals. To test this hypothesis, SERS signals were measured from the surface of a noninfluenza virus, two different influenza viruses, and a genetically shuffled influenza virus. To ensure the safety for experimenters we constructed nonreplicating pseudotyped viruses that display main influenza virus surface components. Pseudotype with influenza virus components produced enhanced Raman peaks, on gold nanoparticles, that are easily distinguishable from those of pseudotype with a noninfluenza virus component, vesicular stomatitis virus G protein (VSVG). Furthermore, virus with the surface components of a newly emerging influenza strain, A/California/04/2009 (H1N1), generated Raman peaks different from those of viruses with components of the conventional laboratory-adapted influenza strain, A/WSN/33 (H1N1). Interestingly, the virus simultaneously displaying surface components of both influenza strains, a model mutant with genome reassortment, also produced a Raman signal pattern that is clearly distinguishable from those of each strain. This work highlights that SERS can provide a powerful label-free strategy to quickly identify newly emerging and potentially fatal influenza viruses.

[Performance evaluation of BD GeneOhm MRSA PCR assay for detection of nasal colonization of methicillin-resistant Staphylococcus aureus at endemic intensive care units].

BACKGROUND: The BD GeneOhm MRSA PCR assay (Becton Dickinson, USA) is a qualitative real-time PCR test for rapid detection of nasal colonization of methicillin-resistant Staphylococcus aureus (MRSA). We evaluated the performance of BD GeneOhm MRSA PCR assay versus MRSASelect (Bio-Rad, France) and broth enrichment cultures for detection of MRSA from nasal swabs. METHODS: From August 2008 to January 2009, 295 nasal swabs were taken from patients in intensive care units and transported to the laboratory with BD CultureSwab Liquid Stuart Single Swab (Becton Dickinson, USA). The swabs were inoculated onto MRSASelect first and then suspended into GeneOhm sample buffer: 100 microL of the suspension was inoculated into 6.5% NaCl-tryptic soy broth (Becton Dickinson, USA), which was subcultured on MRSASelect after overnight incubation (TSBS). Performances of GeneOhm MRSA and MRSASelect were compared to TSBS. RESULTS: With GeneOhm MRSA, 125 swabs (44.6%) were positive for MRSA, 13 (4.4%) were unresolved, and 2 were not determined. With MRSASelect and TSBS 86 (29.4%) and 106 swabs (36.2%), respectively, were positive. The sensitivity, specificity, and positive and negative predictive value of GeneOhm MRSA were 85.8%, 77.5%, and 72.8% and 93.5%, respectively, and corresponding values for MRSASelect were 78.3%, 94.8%, and 96.5% and 88.9%. Of the 33 patients whose 34 specimens were found false positive in GeneOhm MRSA, 23 patients were MRSA-positive either previously or subsequently to this study. All of the 10 patients with false-negative specimens in GeneOhm MRSA PCR assay were previously MRSA or methicilln-resistant coagulase negative staphylococci (MRCNS)-positive and were treated for MRSA, but they became MRSA-positive after 1 to 4 negative surveillance cultures. CONCLUSIONS: GeneOhm MRSA PCR assay showed a relatively high negative predictive value. However, its low specificity and frequent occurrence of unresolved results would be problematic in the endemic areas with a high prevalence of MRSA.