Thermogravimetric analysis of respirable coal mine dust for simple source apportionment.

Resurgence of coal mine dust lung diseases in the central Appalachian region of the United States and elsewhere has spurred a range of efforts to better understand respirable coal mine dust (RCMD) exposures and sources. Thermogravimetric analysis (TGA) of RCMD samples can enable the dust mass to be fractionated into three main components: coal, non-carbonate minerals, and carbonates. These are expected to approximate, respectively, the three primary dust sources in many underground mines: the coal seam being mined, the surrounding rock strata (i.e., typically dominated by non-carbonate minerals) being drilled or mined along with the coal, and the rock dust products (i.e., typically made from carbonate-rich limestone or dolostone) being applied in the mine to mitigate explosibility hazards. As proof of concept, TGA was applied to respirable dust samples that were laboratory-generated from real source materials representing 15 mines. Except in the case of two mines, compositional results were generally consistent with expectations. TGA was also applied to RCMD samples collected in standard locations of 23 mines (including the 15 mines represented by the dust source materials). Results showed significantly different compositions with respect to sampling location and geographic region (i.e., within and outside of central Appalachia). To further interpret the RCMD results, a simple source apportionment model was built using the dust compositions yielded from the source materials analysis. Model results indicated that, on average, about twice as much dust was sourced from mining into rock strata than from mining the target coal seam. This finding is particularly important for mines extracting relatively large amounts of rock along with the coal or for mines that frequently encounter high-silica rock strata.

Localized surface plasmon resonance-based biosensor on gold nanoparticles for Taenia solium detection.

This paper describes, for the first time to our knowledge, a fast-response and specific biosensor for detection of Taenia solium, a parasite responsible for neurocysticercosis disease that affects the central nervous system. The biosensor is based on the localized surface plasmon resonance (LSPR) technique on gold nanoparticles (AuNPs) in colloidal suspension that were functionalized and activated with antibodies to perform an immuno-capture effect. The AuNPs were synthetized by Turkevich and seed-mediated growth methods. A variety of concentrations of T. solium antigen were added to test the detection and the dose-response profile. Small antigen concentrations were detected indicating that the limit of detection is lower than 0.1 µg/mL of antigen. The results demonstrate the potential of the AuNPs LSPR biosensor as a clinical tool for neurocysticercosis diagnostic.

Proanthocyanidins with Corrosion Inhibition Activity for AISI 1020 Carbon Steel under Neutral pH Conditions of Coconut (Cocos nucifera L.) Husk Fibers.

Cocos nucifera L. is a palm tree (Arecaceae) with a high economic value. The coconut husk fibers are nonedible, thick, and abrasion-resistant and correspond up to 85% of biomass discarded as solid waste residue. Therefore, the husk fibers are an underexploited byproduct with a high content of extractives of unreported nature. Two varieties of C. nucifera L. husk extracts were investigated to uncover bioactive metabolites and their possible application as a green corrosion inhibitor for carbon steel AISI 1020 under neutral pH conditions. The chemical analysis indicated 3% (w/w) of proanthocyanidins in the husk fibers with a high B-type procyanidin content. The husk fibers' crude extract showed promising results as an eco-friendly corrosion inhibitor for carbon steel AISI 1020 under neutral pH conditions. Although it formed a film on the metal surface in all tested concentrations (0.4, 0.8, 1.2, and 1.6 g L-1), the highest protective efficiency was shown at a concentration of 1.2 g L-1, determined by electrochemical techniques and mass loss. This was the first comprehensive report on coconut husk fibers' chemical composition, which was similar between the two varieties with potential for industrial application.