Propagation phase-contrast micro-computed tomography allows laboratory-based three-dimensional imaging of articular cartilage down to the cellular level.

OBJECTIVE: High-resolution non-invasive three-dimensional (3D) imaging of chondrocytes in articular cartilage remains elusive. The aim of this study was to explore whether laboratory micro-computed tomography (micro-CT) permits imaging cells within articular cartilage. DESIGN: Bovine osteochondral plugs were prepared four ways: in phosphate-buffered saline (PBS) or 70% ethanol (EtOH), both with or without phosphotungstic acid (PTA) staining. Specimens were imaged with micro-CT following two protocols: 1) absorption contrast (AC) imaging 2) propagation phase-contrast (PPC) imaging. All samples were scanned in liquid. The contrast to noise ratio (C/N) of cellular features quantified scan quality and were statistically analysed. Cellular features resolved by micro-CT were validated by standard histology. RESULTS: The highest quality images were obtained using propagation phase-contrast imaging and PTA-staining in 70% EtOH. Cellular features were also visualised when stained in PBS and unstained in EtOH. Under all conditions PPC resulted in greater contrast than AC (p < 0.0001 to p = 0.038). Simultaneous imaging of cartilage and subchondral bone did not impede image quality. Corresponding features were located in both histology and micro-CT and followed the same distribution with similar density and roundness values. CONCLUSIONS: Three-dimensional visualisation and quantification of the chondrocyte population within articular cartilage can be achieved across a field of view of several millimetres using laboratory-based micro-CT. The ability to map chondrocytes in 3D opens possibilities for research in fields from skeletal development through to medical device design and treatment of cartilage degeneration.

Hip capsule biomechanics after arthroplasty: the effect of implant, approach, and surgical repair.

AIMS: The hip's capsular ligaments passively restrain extreme range of movement (ROM) by wrapping around the native femoral head/neck. We determined the effect of hip resurfacing arthroplasty (HRA), dual-mobility total hip arthroplasty (DM-THA), conventional THA, and surgical approach on ligament function. MATERIALS AND METHODS: Eight paired cadaveric hip joints were skeletonized but retained the hip capsule. Capsular ROM restraint during controlled internal rotation (IR) and external rotation (ER) was measured before and after HRA, DM-THA, and conventional THA, with a posterior (right hips) and anterior capsulotomy (left hips). RESULTS: Hip resurfacing provided a near-native ROM with between 5° to 17° increase in IR/ER ROM compared with the native hip for the different positions tested, which was a 9% to 33% increase. DM-THA generated a 9° to 61° (18% to 121%) increase in ROM. Conventional THA generated a 52° to 100° (94% to 199%) increase in ROM. Thus, for conventional THA, the capsule function that exerts a limit on ROM is lost. It is restored to some extent by DM-THA, and almost fully restored by hip resurfacing. In positions of low flexion/extension, the posterior capsulotomy provided more normal function than the anterior, possibly because the capsule was shortened during posterior repair. However, in deep flexion positions, the anterior capsulotomy functioned better. CONCLUSION: Native head-size and capsular repair preserves capsular function after arthroplasty. The anterior and posterior approach differentially affect postoperative biomechanical function of the capsular ligaments. Cite this article: Bone Joint J 2019;101-B:426-434.

The capsular ligaments provide more hip rotational restraint than the acetabular labrum and the ligamentum teres : an experimental study.

In this in vitro study of the hip joint we examined which soft tissues act as primary and secondary passive rotational restraints when the hip joint is functionally loaded. A total of nine cadaveric left hips were mounted in a testing rig that allowed the application of forces, torques and rotations in all six degrees of freedom. The hip was rotated throughout a complete range of movement (ROM) and the contributions of the iliofemoral (medial and lateral arms), pubofemoral and ischiofemoral ligaments and the ligamentum teres to rotational restraint was determined by resecting a ligament and measuring the reduced torque required to achieve the same angular position as before resection. The contribution from the acetabular labrum was also measured. Each of the capsular ligaments acted as the primary hip rotation restraint somewhere within the complete ROM, and the ligamentum teres acted as a secondary restraint in high flexion, adduction and external rotation. The iliofemoral lateral arm and the ischiofemoral ligaments were primary restraints in two-thirds of the positions tested. Appreciation of the importance of these structures in preventing excessive hip rotation and subsequent impingement/instability may be relevant for surgeons undertaking both hip joint preserving surgery and hip arthroplasty.

Ceramic-on-ceramic bearings in hip arthroplasty: state of the art and the future.

This systematic review of the literature summarises the clinical experience with ceramic-on-ceramic hip bearings over the past 40 years and discusses the concerns that exist in relation to the bearing combination. Loosening, fracture, liner chipping on insertion, liner canting and dissociation, edge-loading and squeaking have all been reported, and the relationship between these issues and implant design and surgical technique is investigated. New design concepts are introduced and analysed with respect to previous clinical experience.

Performance of the resurfaced hip. Part 2: The influence of prosthesis stem design on remodelling and fracture of the femoral neck.

Hip resurfacing is a popular treatment for osteoarthritis in young, active patients. Previous studies have shown that occasional failures--femoral neck fracture and implant loosening, possibly associated with bone adaptation--are affected by prosthesis sizing and positioning, in addition to patient and surgical factors. With the aim of improving tolerance to surgical variation, finite element modelling was used to indicate the effects of prosthesis metaphyseal stem design on bone remodelling and femoral neck fracture, with a range of implant orientations. The analysis suggested that the intact femoral neck strength in trauma could be maintained across a wider range of varus-valgus orientations for short-stemmed and stemless prostheses. Furthermore, the extent of periprosthetic bone remodelling was lower for the short-stemmed implant, with slightly reduced stress shielding and considerably reduced densification around the stem, potentially preventing further progressive proximal stress shielding. The study suggests that a short-stemmed resurfacing head offers improved tolerance to misalignment and remodelling stimulus over traditional designs. While femoral neck fracture and implant loosening are multifactorial, biomechanical factors are of clear importance to the clinical outcome, so this may reduce the risk for patients at the edge of the indications for hip resurfacing, or shorten the surgical learning curve.

Nondestructive evaluation of bone cement and bone cement/metal interface failure.

To quantify the failure mechanisms related to the loosening of cemented hip joint replacements, novel techniques, capable of monitoring, nondestructively, the initiation and progression of failure during in vitro fatigue tests, were employed. Fatigue testing of model cement and cement-stem test pieces was monitored using acoustic emission (AE) sensors. Once damage was detected, an ultrasonic imaging system was used to obtain an image of the damage site and to measure the stiffness of the affected region. This method of examination provided a detailed insight into the internal crack propagation and delamination patterns. Initial work was conducted on bulk cement specimens subjected to bending and tension. The second stage of the work examined a model stem-cement interface under tensile opening loading conditions. A novel ultrasonic technique was used to measure the bond quality at the cement-metal interface. Progressive delamination was identified over time, and the AE technique was able to identify critical areas of delamination before they could be identified conclusively by ultrasonic imaging. The work has demonstrated the potential of the AE technique as a tool for the preclinical assessment of total hip replacements.

Crack initiation processes in acrylic bone cement.

A major constraint in improving the understanding of the micromechanics of the fatigue failure process and, hence, in optimizing bone cement performance is found in the uncertainties associated with monitoring the evolution of the internal defects that are believed to dominate in vivo failure. The present study aimed to synthesize high resolution imaging with complementary damage monitoring/detection techniques. As a result, evidence of the chronology of failure has been obtained. The earliest stages of crack initiation have been captured and it is proposed that, in the presence of a pore, crack initiation may occur away from the pore due to the combined influence of pore morphology and the presence of defects within regions of stress concentration. Furthermore, experimental evidence shows that large agglomerations of BaSO(4) are subject to microcracking during fatigue, although in the majority of cases, these are not the primary cause of failure. It is proposed that cracks may then remain contained within the agglomerations because of the clamping effect of the matrix during volumetric shrinkage upon curing.