Freeform metasurface color router for deep submicron pixel image sensors.

Advances in imaging technologies have led to a high demand for ultracompact, high-resolution image sensors. However, color filter-based image sensors, now miniaturized to deep submicron pixel sizes, face challenges such as low signal-to-noise ratio due to fewer photons per pixel and inherent efficiency limitations from color filter arrays. Here, we demonstrate a freeform metasurface color router that achieves ultracompact pixel sizes while overcoming the efficiency limitations of conventional architectures by splitting and focusing visible light instead of filtering. This development is enabled by a fully differentiable topology optimization framework to maximize the use of the design space while ensuring fabrication feasibility and robustness to fabrication errors. The metasurface can distribute an average of 85% of incident visible light according to the Bayer pattern with a pixel size of 0.6 µm. The device and design methodology enable the compact, high-sensitivity, and high-resolution image sensors for various modern technologies and pave the way for the advanced photonic device design.

HoloSR: deep learning-based super-resolution for real-time high-resolution computer-generated holograms.

This study presents HoloSR, a novel deep learning-based super-resolution approach designed to produce high-resolution computer-generated holograms from low-resolution RGBD images, enabling the real-time production of realistic three-dimensional images. The HoloSR combines the enhanced deep super-resolution network with resize and convolution layers, facilitating the direct generation of high-resolution computer-generated holograms without requiring additional interpolation. Various upscaling scales, extending up to ×4, are evaluated to assess the performance of our method. Quantitative metrics such as structural similarity and peak signal-to-noise ratio are employed to measure the quality of the reconstructed images. Our simulation and experimental results demonstrate that HoloSR successfully achieves super-resolution by generating high-resolution holograms from low-resolution RGBD inputs with supervised and unsupervised learning.

Noise robust Zernike phase retrieval via learning based algorithm only with 2-step phase shift measurements.

We present a noise robust deep learning based aberration analysis method using 2-step phase shift measurement data. We first propose a realistic aberration pattern generation method to synthesize a sufficient amount of real-world-like aberration patterns for training a deep neural network by exploiting the asymptotic statistical distribution parameters of the real-world Zernike coefficients extracted from a finite number of experimentally measured real-world aberration patterns. As a result, we generate a real-world-like synthetic dataset of 200,000 different aberrations from 15 sets of real-world aberration patterns obtained by a Michelson interferometer under a variety of measurement conditions using the 4-step derivative fitting method together with the exploitation of the Gaussian density estimation. We then train the deep neural network with the real-world-like synthetic dataset, using two types of network architectures, GoogLeNet and ResNet101. By applying the proposed learning based 2-step aberration analysis method to the analysis of numerically generated aberrations formed under 100 different conditions, we verify that the proposed 2-step method can clearly outperform the existing 4-step iterative methods based on 4-step measurements, including the derivative fitting, transport of intensity equation (TIE), and robust TIE methods, in terms of noise robustness, root mean square error (RMSE), and inference time. By applying the proposed 2-step method to the analysis of the real-world aberrations experimentally obtained under a variety of measurement conditions, we also verify that the proposed 2-step method achieves compatible performance in terms of the RMSE between the reconstructed and measured aberration patterns, and also exhibits qualitative superiority in terms of reconstructing more realistic fringe patterns and phase distributions compared to the existing 4-step iterative methods. Since the proposed 2-step method can be extended to an even more general analysis of aberrations of any higher order, we expect that it will be able to provide a practical way for comprehensive aberration analysis and that further studies will extend its usefulness and improve its operational performance in terms of algorithm compactness, noise robustness, and computational speed.

Angular distribution of luminescence dissymmetry observed from a random laser built upon the exocuticle of the scarab beetle Chrysina gloriosa.

We investigate the angular distribution of luminescence dissymmetry of random lasing in the mixture of rhodamine 6G and titanium dioxide nanoparticles upon a biocompatible natural material substrate, i.e., the elytron of the scarab beetle Chrysina gloriosa. We look into both green and gold-colored areas of the elytron that exhibit distinctly different circular dichroism properties. The fabricated sample asymmetrically emits both left- and right-handed circularly polarized light at 570 nm when pumped at 532 nm, depending on the direction of emission and the angle of the pump incidence. We characterize the light via measuring the angular distribution of its luminescence dissymmetry factor (g lum), which reaches an unusually high maximal value of 0.90 or -0.50 at some specific angle depending on the handedness of its polarization. This random laser source can be used in numerous potential optoelectronic applications which require light emission of distributed luminescence dissymmetry or of high luminescence dissymmetry.

Modal decomposition of fiber modes based on direct far-field measurements at two different distances with a multi-variable optimization algorithm.

We present a novel method for modal decomposition of a composite beam guided by a large-mode-area fiber by means of direct far-field pattern measurements with a multi-variable optimization algorithm. For reconstructing far-field patterns, we use finite-number bases of Hermite Gaussian modes that can be converted from all the guided modes in the given fiber and exploit a stochastic parallel gradient descent (SPGD)-based multi-variable optimization algorithm equipped with the D4σ technique in order for completing the modal decomposition with compensating the centroid mismatch between the measured and reconstructed beams. We measure the beam intensity profiles at two different distances, which justifies the uniqueness of the solution obtained by the SPGD algorithm. We verify the feasibility and effectiveness of the proposed method both numerically and experimentally. We have found that the fractional error tolerance in terms of the beam intensity overlap could be maintained below 1 × 10-7 and 3.5 × 10-3 in the numerical and experimental demonstrations, respectively. As the modal decomposition is made uniquely and reliably, such a level of the error tolerance could be maintained even for a beam intensity profile measured at a farther distance.

Numerical study of superradiant mixing by an unsynchronized superradiant state of multiple atomic ensembles.

We numerically analyze superradiant dynamics in atomic ensembles that have different transition frequencies using a numerical model that can take account of the transient behavior of an unsynchronized superradiant state. The numerical results unveil that the superradiant emission of a periodic pulse train can be induced by means of collective multiple frequency generation, which we call superradiant mixing. This is, in fact, due to the superradiant coupling of unsynchronized atomic ensembles. We numerically investigate the superradiant mixing in detail, varying the collective decay rate, repumping rate, and the number of the individual atomic ensembles with detuned frequencies. This work broadens our understanding of the collective atomic behavior in a detuned system, and it also suggests a novel method for frequency generation without relying on the conventional Kerr nonlinear effect.

Modeling Er/Yb fiber lasers at high powers.

Conventional models of Er/Yb co-doped fibers assume all ytterbium ions are equally involved in the energy transfer with erbium ions, governed by a singular transfer rate. This would predict output power clamping once ytterbium parasitic lasing starts, contrary to the observations that the output continued to grow albeit at a slower rate. One study explained this using elevated temperature at high powers. Our study, however, shows that elevated temperature and mode-dependent effects only play insignificant roles. A new model is developed based on the existence of isolated ytterbium ions, which can explain all the observed experimental behaviors.

Intermittent burst of a super rogue wave in the breathing multi-soliton regime of an anomalous fiber ring cavity.

We report the intermittent burst of a super rogue wave in the multi-soliton (MS) regime of an anomalous-dispersion fiber ring cavity. We exploit the spatio-temporal measurement technique to log and capture the shot-to-shot wave dynamics of various pulse events in the cavity, and obtain the corresponding intensity probability density function, which eventually unveils the inherent nature of the extreme events encompassed therein. In the breathing MS regime, a specific MS regime with heavy soliton population, the natural probability of pulse interaction among solitons and dispersive waves exponentially increases owing to the extraordinarily high soliton population density. Combination of the probabilistically started soliton interactions and subsequently accompanying dispersive waves in their vicinity triggers an avalanche of extreme events with even higher intensities, culminating to a burst of a super rogue wave nearly ten times stronger than the average solitons observed in the cavity. Without any cavity modification or control, the process naturally and intermittently recurs within a time scale in the order of ten seconds.

Metallic Fresnel zone plate implemented on an optical fiber facet for super-variable focusing of light.

We propose and investigate a metallic Fresnel zone plate (FZP/MFZP) implemented on a silver-coated optical fiber facet for super-variable focusing of light, the focal point of which can be drastically relocated by varying the wavelength of the incident light. We numerically show that when its nominal focal length is set to 20 µm at 550 nm, its effective focal length can be tuned by ~13.7 µm for 300-nm change in the visible wavelength range. This tuning sensitivity is over 20 times higher than that of a conventional silica-based spherical lens. Even with such high tuning sensitivity with respect to the incident wavelength change, the effective beam radius at the focal point is preserved nearly unchanged, irrespective of the incident wavelength. Then, we fabricate the proposed device, exploiting electron- and focused-ion-beam processes, and experimentally verify its super-variable focusing functionality at typical red, green, and blue wavelengths in the visible wavelength range, which is in good agreement with the numerical prediction. Moreover, we propose a novel MFZP structure that primarily exploits the surface-plasmon-polariton-mediated, extra-ordinary transmission effect. For this we make all the openings of an MFZP, which are determined by the fundamental FZP design formula, be partitioned by multi-rings of all-sub-wavelength annular slits, so that the transmission of azimuthally polarized light is inherently prohibited, thereby leading to super-variable and selective focusing of radially polarized light. We design and fabricate a proof-of-principle structure implemented on a gold-coated fused-silica substrate, and verify its novel characteristics both numerically and experimentally, which are mutually in good agreement. We stress that both the MFZP structures proposed here will be very useful for micro-machining, optical trapping, and biomedical sensing, in particular, which invariably seek compact, high-precision, and flexible focusing schemes.

Focus issue introduction: Advanced Solid-State Lasers (ASSL) 2016.

The editors introduce the focus issue on "Advanced Solid-State Lasers (ASSL) 2016", which is based on the topics presented at a conference of the same name held in Boston, USA, from October 30 to November 3, 2016. This focus issue, jointly prepared by Optics Express and Optical Materials Express, includes 20 contributed papers (14 for Optics Express and 6 for Optical Materials Express) selected from the voluntary submissions from attendees who presented at the conference and have extended their work into complete research articles. We hope this focus issue provides a useful link to the variety of topical discussions held at the conference and will contribute to the further expansion of the associated research areas.

The In Vivo Effect of Ytterbium-Doped Fiber Laser on Rat Buccal Mucosa as a Simulation of Its Effect on the Urinary Tract: A Preclinical Histopathological Evaluation.

PURPOSE: The aim of this study was to perform a histological analysis of the effect of a ytterbium-doped fiber (YDF) laser on oral buccal mucosa tissue in vivo to simulate its effect on the mucosa of the lower urinary tract. METHODS: A total of 90 8-week-old Sprague-Dawley rats were anesthetized with urethrane (1.2 g/kg intraperitoneally). A prespecified inner buccal mucosal site was irradiated with a YDF master-oscillator power amplifier (MOPA) system for 60 seconds, with output power settings of 0.5, 1, and 2 W, respectively, in 3 treatment groups. Specimens of irradiated tissue were harvested at 2 hours, 24 hours, 2 weeks, and 4 weeks after irradiation. The tissue specimens were stained with hematoxylin and eosin for histological analysis. RESULTS: In the group treated with 0.5 W, basal cell elongation and vacuolization were observed at 2 hours and 24 hours after treatment, respectively. No evident injury was observed after 2 or 4 weeks. The group treated with 1 W presented partial basal layer separation, and even complete epidermal ablation, within 2 hours. At 24 hours after laser treatment, new capillaries on an edematous background of fibroblasts and myofibroblasts, as well as profuse infiltration of the neutrophils to the basal layer, were observed. Collagen deposition and reepithelization were observed in specimens taken 2 weeks and 4 weeks after treatment. The group treated with 2 W presented bigger and deeper injuries at 2 hours after irradiation. Meanwhile, subepidermal bullae with full-thickness epidermal necrosis and underlying inflammatory infiltrate were observed 24 hours after treatment. The presence of fibrous connective tissue and collagen deposition were observed 2 weeks and 4 weeks after the treatment. CONCLUSIONS: To our knowledge, this is the first report regarding the effect of a YDF laser on living tissue. Our study demonstrated that the typical histological findings of the tissue reaction to the YDF MOPA apparatus were very similar to those associated with thermal injuries. The extent and degree of tissue damage increased proportionally to the output power.

Corrugation-assisted metal-coated angled fiber facet for wavelength-dependent off-axis directional beaming.

We propose a fiber-optic-plasmonic hybrid device that is based on a corrugation-assisted metal-coated angled fiber facet (CA-MCAFF) for wavelength-dependent off-axis directional beaming (WODB). The device breaks into two key structures: One is the MCAFF structure, which is a modified Kretschmann configuration implemented onto a fiber platform, thereby being able to generate a unidirectional surface plasmon with dramatically enhanced properties in terms of non-confined diffracted radiation loss and operational bandwidth. The other is the periodic corrugation structure put on the MCAFF, thereby enabling WODB functionality out of the whole structures. The corrugated metal surface out-couples the surface plasmon mode to free-space optical radiation into a direction that varies with the wavelength of the optical radiation with excellent linearity. We perform extensive numerical investigations based on the finite-element-method and analyze the out-coupling efficiency (OCEout) and spectral bandwidth (SBout) of the proposed device for various designs and conditions. We determine the seven structural parameters of the device via taking sequential optimization steps. We deduce two optimal conditions particularly for the fiber-facet angle, in terms of the averaged OCEout or the SBout in the whole visible wavelength range (400 - 700 nm), which eventually leads to OCEout = 30.4% and SBout = 230 nm or to OCEout = 24.5% and SBout = 245 nm, respectively. These results suggest substantial enhancements in both OCEout and SBout, in comparison with the performance properties of a typical nano-slit-based device having a similar type of WODB functionality. The proposed CA-MCAFF is a simple, compact and efficient WODB device that is fully compatible with the state-of-the-art optical fiber technology.

Numerical study on multi-pulse dynamics and shot-to-shot coherence property in quasi-mode-locked regimes of a highly-pumped anomalous dispersion fiber ring cavity.

We numerically investigate quasi-mode-locked (QML) multi-pulse dynamics in a fiber ring laser cavity in the anomalous dispersion regime. We show that the laser cavity can operate in five constitutively different QML regimes, depending on the saturation power of the saturable absorber element and the length of the passive fiber section that parameterize the overall nonlinearity and dispersion characteristic of the laser cavity. We classify them into the incoherent noise-like-pulse, partially-coherent noise-like-pulse, symbiotic, partially-coherent multi-soliton, and coherent multi-soliton regimes, accounting for their coherence and multi-pulse formation features. In particular, we numerically clarify and confirm the symbiotic regime for the first time to the best of our knowledge, in which noise-like pulses and multi-solitons coexist stably in the cavity that has recently been observed experimentally. Furthermore, we analyze the shot-to-shot coherence characteristics of the individual QML regimes relative to the amount of the nonlinear-phase shift per roundtrip, and verify a strong correlation between them. We also show that the net-cavity dispersion plays a critical role in determining the multi-pulse dynamics out of the partially-coherent noise-like-pulse, symbiotic, and partially-coherent multi-soliton regimes, when the cavity bears moderate nonlinearity. We quantify and visualize all those characteristics onto contour maps, which will be very useful and helpful in discussing and clarifying the complex QML dynamics.

Roadmap on optical sensors.

Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both conventional, specialty and photonic crystal fibers. Several other sections are dedicated to micro- and nano-engineered sensors, including whispering-gallery mode and plasmonic sensors. The uses of optical sensors in chemical, biological and biomedical areas are described in other sections. Different approaches required to satisfy applications at visible, infrared and THz spectral regions are also discussed. Advances in science and technology required to meet challenges faced in each of these areas are addressed, together with suggestions on how the field could evolve in the near future.

Focus issue introduction: Advanced Solid-State Lasers (ASSL) 2015.

The editors introduce the focus issue on "Advanced Solid-State Lasers (ASSL) 2015", which is based on the topics presented at a congress of the same name held in Berlin, Germany, from October 4 to October 9, 2015. This focus issue, jointly prepared by Optics Express and Optical Materials Express, includes 23 contributed papers (17 for Optics Express and 6 for Optical Materials Express) selected from the voluntary submissions from attendees who presented at the congress and have extended their work into complete research articles. We hope this focus issue offers a good snapshot of a variety of topical discussions held at the congress and will contribute to the further expansion of the associated research areas.

Focus issue introduction: Advanced solid-state lasers (ASSL) 2014.

The editors introduce the focus issue on "Advanced Solid-State Lasers (ASSL) 2014," which is based on the topics presented at a congress of the same name held in Shanghai, China, from October 27 to November 1, 2014. This focus issue, jointly prepared by Optics Express and Optical Materials Express, includes 28 contributed papers (21 for Optics Express and 7 for Optical Materials Express) selected from the voluntary submissions by attendees who presented at the congress and have extended their work into complete research articles. We hope this focus issue offers a useful snapshot of the variety of topical discussions held at the congress and will contribute to the further expansion of the associated research areas.

Theoretical study on the generation of a low-noise plasmonic hotspot by means of a trench-assisted circular nano-slit.

We propose a novel trench-assisted circular metal nano-slit (CMNS) structure implementable on a fiber platform for the generation of a low-noise cylindrical surface plasmon (CSP) hotspot. We design trench structures based on a multi-pole cancellation method in order that a converging surface plasmon signal is well separated from co-propagating non-confined diffracted light (NCDL) at the hotspot location. In fact, the secondary radiation by the quasi-pole oscillation at the edge of the trench cancels the primary NCDL, thereby enhancing the signal-to-noise ratio (SNR) of the CSP hotspot. In particular, we investigate two types of trench structures: a rectangular-trench (RT) structure and an asymmetric-parabolic-trench (APT) structure, which are considered for the sake of the simplicity of fabrication and of the maximal enhancement of the SNR, respectively. In comparison with a conventional CMNS having no trenches, we highlight that the mean SNR of the CSP hotspot is enhanced by 6.97 and 11.89 dB in case of the optimized RT and APT CMNSs, respectively. The proposed schemes are expected to be useful for increasing the SNR of plasmonic devices that are interfered by NCDL, such as various types of nano-slits for generating high-resolution plasmonic signals, for example.

A quasi-mode interpretation of acoustic radiation modes for analyzing Brillouin gain spectra of acoustically antiguiding optical fibers.

We propose a novel quasi-mode interpretation (QMI) method to represent acoustic radiation modes in acoustically antiguiding optical fibers (AAOFs) in terms of discrete quasi-modes. The QMI method readily enables one to obtain the full quasi-modal properties of AAOFs, including the complex propagation constants, mode center frequencies, and field distributions in an intuitive and much simplified way, compared to other previous methods. We apply the QMI method to analyze the Brillouin gain spectrum of an AAOF that has typically been used to mitigate stimulated Brillouin scattering of optical waves. The result based on the QMI method is in good agreement with the numerical and experimental results for the same fiber structure previously reported in the literature. Considering the effectiveness and simplicity of its numerical procedure, we expect the use of the QMI method can further be extended to even more complicated numerical analyses with acoustic radiation modes, which include the acoustically antiguiding, large-core optical fibers in multi-mode regimes.

Focus issue introduction: Advanced Solid-State Lasers (ASSL) 2013.

The editors introduce the focus issue on "Advanced Solid-State Lasers (ASSL) 2013," which is based on the topics presented at a congress of the same name held in Paris, France, from October 27 to November 1, 2013. This focus issue, jointly prepared by Optics Express and Optical Materials Express, includes 21 contributed papers (18 for Optics Express and 3 for Optical Materials Express) selected from the voluntary submissions from attendees who presented at the congress and have extended their work into complete research articles. We hope this focus issue offers a good snapshot of a variety of topical discussions held at the congress and will contribute to the further expansion of the associated research areas.

Adaptive broadband continuum source at 1200-1400 nm based on an all-fiber dual-wavelength master-oscillator power amplifier and a high-birefringence fiber.

We experimentally analyze the stimulated Raman scattering characteristics of a high-birefringence fiber (HBF), which presents an extraordinary level of spectral broadening incurred by the strong nonlinear interaction between the pump and Stokes pulses via the polarization-mode dispersion and group-velocity dispersion of the fiber. We also investigate the impact of the inter-pulse time-delay on the additional spectra broadening when dual-wavelength pump pulses are used. Exploiting these unique SRS properties of the HBF, we develop a novel Raman continuum source based on an all-fiber dual-wavelength master-oscillator power amplifier that can generate a dip-free spectrum in the 1200-1400-nm spectral range. We finally obtain a broadband continuum having an average power of ~840 mW and a 3-dB bandwidth of ~240 nm centered at 1200-1400 nm, which also represents a good spectral flatness and conversion efficiency. This type of source is very useful and important for optical coherence tomography applications, for example.