Stöber method to amorphous metal-organic frameworks and coordination polymers.

The Stöber method is a widely-used sol-gel route for synthesizing amorphous SiO2 colloids and conformal coatings. However, the material systems compatible with this method are still limited. Herein, we have extended the approach to metal-organic frameworks (MOFs) and coordination polymers (CPs) by mimicking the Stöber method. We introduce a general synthesis route to amorphous MOFs or CPs by making use of a base-vapor diffusion method, which allows to precisely control the growth kinetics. Twenty-four different amorphous CPs colloids were successfully synthesized by selecting 12 metal ions and 17 organic ligands. Moreover, by introducing functional nanoparticles (NPs), a conformal amorphous MOFs coating with controllable thickness can be grown on NPs to form core-shell colloids. The versatility of this amorphous coating technology was demonstrated by synthesizing over 100 core-shell composites from 20 amorphous CPs shells and over 30 different NPs. Besides, various multifunctional nanostructures, such as conformal yolk-amorphous MOF shell, core@metal oxides, and core@carbon, can be obtained through one-step transformation of the core@amorphous MOFs. This work significantly enriches the Stöber method and introduces a platform, enabling the systematic design of colloids exhibiting different level of functionality and complexity.

The tin content of lead inclusions in ancient tin-bronze artifacts: a time-dependent process?

In antiquity, Pb was a common element added in the production of large bronze artifacts, especially large statues, to impart fluidity to the casting process. As Pb does not form a solid solution with pure Cu or with the Sn-Cu alloy phases, it is normally observed in the metal matrix as globular droplets embedded within or in interstitial positions among the crystals of Sn-bronze (normally the α phase) as the last crystallizing phase during the cooling process of the Cu-Sn-Pb ternary melt. The disequilibrium Sn content of the Pb droplets has recently been suggested as a viable parameter to detect modern materials [Shilstein, Berner, Feldman, Shalev & Rosenberg (2019). STAR Sci. Tech. Archaeol. Res. 5, 29-35]. The application assumes a time-dependent process, with a timescale of hundreds of years, estimated on the basis of the diffusion coefficient of Sn in Pb over a length of a few micrometres [Oberschmidt, Kim & Gupta (1982). J. Appl. Phys. 53, 5672-5677]. Therefore, Pb inclusions in recent Sn-bronze artifacts are actually a metastable solid solution of Pb-Sn containing ∼3% atomic Sn. In contrast, in ancient artifacts, unmixing processes and diffusion of Sn from the micro- and nano-inclusions of Pb to the matrix occur, resulting in the Pb inclusions containing a substantially lower or negligible amount of Sn. The Sn content in the Pb inclusions relies on accurate measurement of the lattice parameter of the phase in the Pb-Sn solid solution, since for low Sn values it closely follows Vegard's law. Here, several new measurements on modern and ancient samples are presented and discussed in order to verify the applicability of the method to the detection of modern artwork pretending to be ancient.

In situ/operando plug-flow fixed-bed cell for synchrotron PXRD and XAFS investigations at high temperature, pressure, controlled gas atmosphere and ultra-fast heating.

A plug-flow fixed-bed cell for synchrotron powder X-ray diffraction (PXRD) and X-ray absorption fine structure (XAFS) idoneous for the study of heterogeneous catalysts at high temperature, pressure and under gas flow is designed, constructed and demonstrated. The operating conditions up to 1000°C and 50 bar are ensured by a set of mass flow controllers, pressure regulators and two infra-red lamps that constitute a robust and ultra-fast heating and cooling method. The performance of the system and cell for carbon dioxide hydrogenation reactions under specified temperatures, gas flows and pressures is demonstrated both for PXRD and XAFS at the P02.1 (PXRD) and the P64 (XAFS) beamlines of the Deutsches Elektronen-Synchrotron (DESY).

Unveiling polyamorphism and polyamorphic interconversions in pharmaceuticals: the peculiar case of hydrochlorothiazide.

Polyamorphism has been a controversial and highly debated solid-state phenomenon in both material and pharmaceutical communities. Although some evidence of this fascinating phenomenon has been reported for several inorganic systems, and more recently also for a few organic compounds, the occurrence of polyamorphism is poorly understood and the molecular-level organization of polyamorphic forms is still unknown. Here we have investigated the occurrence of polyamorphism and polyamorphic interconversions in hydrochlorothiazide (HCT), using both experimental and computational methods. Three distinct HCT polyamorphs, presenting distinct physical and thermal stabilities as well as distinct relaxation properties, were systematically prepared using spray-drying (SD), quench-cooling (QC) and ball milling (BM) methods. HCT polyamorph II (obtained by QC) was found to be more physically stable than polyamorphs I and III (obtained by SD and BM, respectively). Furthermore, polyamorphs I and III could be converted into polyamorph II after QC, while polyamorph II did not convert to any other polyamorph after SD or BM. Molecular dynamics simulations show that HCT dihedral angle distributions are significantly different for polyamorphs I and II, which is postulated as a possible explanation for their different physicochemical properties.

Toughening oxide glasses through paracrystallization.

Glasses, unlike crystals, are intrinsically brittle due to the absence of microstructure-controlled toughening, creating fundamental constraints for their technological applications. Consequently, strategies for toughening glasses without compromising their other advantageous properties have been long sought after but elusive. Here we report exceptional toughening in oxide glasses via paracrystallization, using aluminosilicate glass as an example. By combining experiments and computational modelling, we demonstrate the uniform formation of crystal-like medium-range order clusters pervading the glass structure as a result of paracrystallization under high-pressure and high-temperature conditions. The paracrystalline oxide glasses display superior toughness, reaching up to 1.99 ± 0.06 MPa m1/2, surpassing any other reported bulk oxide glasses, to the best of our knowledge. We attribute this exceptional toughening to the excitation of multiple shear bands caused by a stress-induced inverse transformation from the paracrystalline to amorphous states, revealing plastic deformation characteristics. This discovery presents a potent strategy for designing highly damage-tolerant glass materials and emphasizes the substantial influence of atomic-level structural variation on the properties of oxide glasses.

Tuneable Phase, Morphology, and Performance of Bismuth Oxyhalide Photocatalysts via Microwave-Assisted Synthesis.

In this study, a facile microwave-assisted synthesis approach was used to produce a series of bismuth oxyhalide photocatalysts, with systematic changes in synthesis pH between 1 and 14 allowing control over a broad range of material properties and characteristics. Detailed structural and morphological investigations with powder X-ray diffraction (PXRD), Rietveld refinements, pair distribution function (PDF) analysis, and scanning electron microscopy (SEM) show that thin particles of BiOCl, BiOBr, Bi24O31Cl10, and Bi24O31Br10 were selectively produced, with progressive changes in morphology, facet dominance, and phase as a function of pH. The impact of these changes on photocatalytic performance was evaluated by studying the aerobic oxidation of benzylamine to N-benzylidenebenzylamine, with all materials exhibiting photocatalytic abilities under UV or blue light. While a combination of material properties and characteristics influenced the photocatalytic performance, certain factors such as surface area, facet dominance, amorphous content, and band gap were found to have a larger impact on the photocatalytic yield. Overall, this study demonstrates the possibilities of phase, morphology, and performance of bismuth oxyhalide photocatalysts over the entire pH range, produced using a fast and facile microwave-assisted synthesis technique as an alternative to the more widely applied hydrothermal synthesis approach. Additionally, the detailed structural and morphological investigations of the materials contribute to a greater understanding of bismuth oxyhalide photocatalysts in general, while also highlighting some of the most desirable properties for improved photocatalytic performance of these materials.

Pyrolysis of a metal-organic framework followed by in situ X-ray absorption spectroscopy, powder diffraction and pair distribution function analysis.

Metal-organic frameworks (MOFs) can serve as precursors for new nanomaterials via thermal decomposition. Such MOF-derived nanomaterials (MDNs) are often comprised of metal and/or metal oxide particles embedded on porous carbon. The morphology of MDNs is similar to that of the precursor MOF, and improved stability and catalytic properties have been demonstrated. However, the pathway from MOF to MDN is only well understood for a few systems, and in situ studies are needed to elucidate the full phase behaviour and time/temperature dependency. In this work, we follow the MOF-to-MDN transformation in situ by using three complementary techniques: X-ray absorption spectroscopy (XAS), powder X-ray diffraction (PXRD), and X-ray total scattering/pair distribution function (TS/PDF) analysis. The thermal decomposition of HKUST-1, i.e. the archetypical MOF Cu3(btc = 1,3,5-benzenetricarboxylate)2, is followed from room temperature to 500 °C by applying different heating ramps. Real space correlations are followed by PDF and extended X-ray absorption fine structure (EXAFS) analysis, and quantitative phase fractions are obtained by refinement of PXRD and PDF data, and by linear combination analysis (LCA) of X-ray absorption near edge Structure (XANES) data. We find that HKUST-1 decomposes at 300-325 °C into copper(I) oxide and metallic copper. Above 350-470 °C, metal particles remain as the only copper species. There is an overall good agreement between all three techniques with respect to the phase evolution, and the study paves the road towards rational synthesis of a Cu2O/Cu/carbon material with the desired metal/metal oxide composition. More importantly, our investigations serve as a benchmark study demonstrating that this methodology is generally applicable for studying the thermal decomposition of MOFs.

Exploring the structures, stability, and light absorption properties of three thiostannates synthesised at similar conditions.

We present the synthesis, crystal structures and optical properties of three thiostannates prepared by using 1-(2-aminoethyl)piperazine (AEPz) as structure directing agent. Two of the thiostannates are layered materials (AEPz-SnS-1 and AEPz:EtOH-SnS-1) consisting of [Sn3S72-]n sheets with organic cations located in-between. The third compound is a molecular thiostannate (Sn2S6(AEPzH2)2) composed of dimeric Sn2S64- and AEPzH22+. In preparation of the layered compounds, the use of AEPz as the only solvent results in AEPz-SnS-1 with regular hexagonal pores and crystallographically disordered organic cations. In contrast, a mixture of AEPz and absolute ethanol gives AEPz:EtOH-SnS-1 with distorted hexagonal pores and ordered cations between the layers. The influence of cation order on the light absorption properties and the material thermal stability was investigated through thermal treatment of the layered compounds up to 200 °C. Both compounds show colour changes when heated, but cation order results in larger thermal stability. For AEPz-SnS-1, a decreased inter-layer distance and substantial loss of organic matter was observed when heated. However, pair distribution function analysis reveals that the local in-layer thiostannate structure of AEPz-SnS-1 remains unchanged. In contrast, AEPz:EtOH-SnS-1 does not undergo noticeable structural changes by the thermal treatment. All materials are optical semiconductors with band gaps of 3.0-3.1 eV.

Anion and solvent controlled growth of crystalline and amorphous zinc(ii) coordination polymers and a molecular complex.

Controlled bottom-up synthesis of amorphous coordination polymers with tailored metal coordination is a research field in its infancy. In this study, synthesis control was achieved to selectively prepare one-dimensional (1D) crystalline and amorphous zinc(ii)-based coordination polymers and a dimeric molecular compound, all with similar coordination geometry as evidenced by X-ray diffraction and total scattering studies. The compounds were obtained by bottom up self-assembly of Zn(ii) with terephthalate (tph2-) as linker and the enantiopure chelating ligand S-(1,2)-bis(1H-benzimidazol-2-yl)ethanol (L). The solvent and the coordination ability of the precursor zinc salt anion control the crystalline products formed by slow diffusion at room temperature: perchlorate allows isolation of the phase pure crystalline 1D polymer {[Zn(tph)(L)]·H2O·3DMF}n (1·H2O·3DMF, DMF = N,N-dimethylformamide). In contrast, zinc chloride leads to the formation of either a mixture of polymeric 1·H2O·3DMF and a dimeric molecular species [Zn2Cl2(tph)(L)2]·4DMF (2·4DMF), or to the phase pure dimer 2·4DMF, depending on the Zn(ii) : tphH2 stoichiometry. A modified synthesis using zinc nitrate and fast precipitation by base addition results in an amorphous analogue of the 1D polymer (3). Chains of 1·H2O·3DMF pack into a non-porous crystalline material with a surface area of just 6 m2 g-1, while the outer surface area of amorphous polymer 3 is a factor of eight larger. Hence, the amorphous compound provides larger metal site accessibility for potential surface chemical reactions, while maintaining the coordination geometry of the metal sites. The temperature response of crystalline polymer 1·H2O·3DMF was studied using multi-temperature single crystal X-ray diffraction (100-300 K). The a = b axes display normal positive thermal expansion, while the c axis remains constant with increasing temperature due to partial relaxation of the terephthalate linkers and slightly changed geometry within the individual polymer chains.

Structural changes during water-mediated amorphization of semiconducting two-dimensional thio-stannates.

Owing to their combined open-framework structures and semiconducting properties, two-dimensional thio-stannates show great potential for catalytic and sensing applications. One such class of crystalline materials consists of porous polymeric [Sn3S7 2-] n sheets with molecular cations embedded in-between. The compounds are denoted R-SnS-1, where R is the cation. Dependent on the cation, some R-SnS-1 thio-stannates transition into amorphous phases upon dispersion in water. Knowledge about the fundamental chemical properties of the thio-stannates, including their water stability and the nature of the amorphous products, has not yet been established. This paper presents a time-resolved study of the transition from the crystalline to the amorphous phase of two violet-light absorbing thio-stannates, i.e. AEPz-SnS-1 [AEPz = 1-(2-amino-ethyl)-piperazine] and trenH-SnS-1 [tren = tris-(2-amino-ethyl)-amine]. X-ray total scattering data and pair distribution function analysis reveal no change in the local intralayer coordination during the amorphization. However, a rapid decrease in the crystalline domain sizes upon suspension in water is demonstrated. Although scanning electron microscopy shows no significant decrease of the micrometre-sized particles, transmission electron microscopy reveals the formation of small particles (∼200-400 nm) in addition to the larger particles. The amorphization is associated with disorder of the thio-stannate nanosheet stacking. For example, an average decrease in the interlayer distance (from 19.0 to 15.6 Å) is connected to the substantial loss of the organic components as shown by elemental analysis and X-ray photoelectron spectroscopy. Despite the structural changes, the light absorption properties of the amorphisized R-SnS-1 compounds remain intact, which is encouraging for future water-based applications of such materials.

Identification and Directed Development of Non-Organic Catalysts with Apparent Pan-Enzymatic Mimicry into Nanozymes for Efficient Prodrug Conversion.

Nanozymes, nanoparticles that mimic the natural activity of enzymes, are intriguing academically and are important in the context of the Origin of Life. However, current nanozymes offer mimicry of a narrow range of mammalian enzymes, near-exclusively performing redox reactions. We present an unexpected discovery of non-proteinaceous enzymes based on metals, metal oxides, 1D/2D-materials, and non-metallic nanomaterials. The specific novelty of these findings lies in the identification of nanozymes with apparent mimicry of diverse mammalian enzymes, including unique pan-glycosidases. Further novelty lies in the identification of the substrate scope for the lead candidates, specifically in the context of bioconversion of glucuronides, that is, human metabolites and privileged prodrugs in the field of enzyme-prodrug therapies. Lastly, nanozymes are employed for conversion of glucuronide prodrugs into marketed anti-inflammatory and antibacterial agents, as well as "nanozyme prodrug therapy" to mediate antibacterial measures.