ABSTRACT
[This corrects the article DOI: 10.1016/j.heliyon.2019.e02412.].
ABSTRACT
This article reports the synthesis of PbO doped MgZnO (PbO@MgZnO) by a co-precipitation method, followed by an ultrasonication process. PbO@MgZnO demonstrates a significant adsorption capability toward Magenta Dye (MD). The greatest adsorption capability was optimized by varying parameters such as pH, MD concentration, and adsorbent dose. The kinetics study illustrates that the adsorption of MD on PbO@MgZnO follows the pseudo-second-order. The isotherm study revealed that Langmuir is best fitted for the adsorption, but with little difference in the R2 value of Langmuir and Freundlich, the adsorption process cloud be single or multi-layer. The maximum adsorption capacity was found to be 333.33 mg/g. The negative ΔG refers to the spontaneity of MD adsorption on PbO@MgZnO. The steric parameters from statistical physics models also favor the multi-layer adsorption mechanism. As a function of solution temperature, the parameter n pattern has values of n = 0.395, 0.290, and 0.280 for 298, 308, and 318 K, respectively (i.e., all values were below 1). Therefore, horizontal molecule positioning and multiple locking mechanisms were implicated during interactions between MD and PbO@MgZnO active sites.
Subject(s)
Rosaniline Dyes , Water Pollutants, Chemical , Adsorption , Hydrogen-Ion Concentration , Kinetics , Physics , Thermodynamics , Water Pollutants, Chemical/analysisABSTRACT
[This corrects the article DOI: 10.1016/j.heliyon.2019.e02412.].
ABSTRACT
In the present research article we explore the synthesis method and adsorption capability of ZnFe oxides nanocomposites by using Pb as dopant. A conventional and simple batch adsorption method is selected and optimized. Pb@ZnFe2O4 NCs were fabricated by facile method i.e. co-precipitation method and characterized by FESEM, XRD, IR, EDX. The removal of dye has monitored by UV method. An outstanding result is obtained as adsorption efficiency of 1042 mg g-1 shows more significant performance than currently available bench-mark adsorbents. The optimized parameters pH 7.1, Adsorbent Mass: 50 mg, Initial Dye Concentration: 150 mg/l and Agitation Time: 90 min results in 96.49 % removal of CR (Congo red) dye. A CCD (central composite design) is applied to evaluate the role of adsorption variables. Based on its excellent performance, cost effectiveness, facile fabrication and large surface area, the Pb@ZnFe2O4 has considerable potential for the manufacture of cost effective and efficient adsorbents for environmental applications.
