Efficient and Stable Inverted Perovskite Solar Modules Enabled by Solid-Liquid Two-Step Film Formation.

A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells. The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs. In this work, we adopted a solid-liquid two-step film formation technique, which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films. This method possesses the advantages of integrating vapor deposition and solution methods, which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform, large-area perovskite film. Furthermore, modification of the NiOx/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization. As a result, a large-area perovskite film possessing larger grains, fewer pinholes, and reduced defects could be achieved. The inverted PSM with an active area of 61.56 cm2 (10 × 10 cm2 substrate) achieved a champion power conversion efficiency of 20.56% and significantly improved stability. This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication.

Multifunctional Buffer Layer Engineering for Efficient and Stable Wide-Bandgap Perovskite and Perovskite/Silicon Tandem Solar Cells.

Inverted perovskite solar cells (PSCs) are preferred for tandem applications due to their superior compatibility with diverse bottom solar cells. However, the solution processing and low formation energy of perovskites inevitably lead to numerous defects at both the bulk and interfaces. We report a facile and effective strategy for precisely modulating the perovskite by incorporating AlOx deposited by atomic layer deposition (ALD) on the top interface. We find that Al3+ can not only infiltrate the bulk phase and interact with halide ions to suppress ion migration and phase separation but also regulate the arrangement of energy levels and passivate defects on the perovskite surface and grain boundaries. Additionally, ALD-AlOx exhibits an encapsulation effect through a dense interlayer. Consequently, the ALD-AlOx treatment can significantly improve the power conversion efficiency (PCE) to 21.80% for 1.66-electron-volt (eV) PSCs. A monolithic perovskite-silicon TSCs using AlOx-modified perovskite achieved a PCE of 28.5% with excellent photothermal stability. More importantly, the resulting 1.55-eV PSC and module achieved a PCE of 25.08% (0.04 cm2) and 21.01% (aperture area of 15.5 cm2), respectively. Our study provides an effective way to efficient and stable wide-bandgap perovskite for perovskite-silicon TSCs and paves the way for large-area inverted PSCs.

Antagonizing roles of SHP1 in the pathogenesis of Helicobacter pylori infection.

BACKGROUND: SHP1 has been documented as a tumor suppressor and it was thought to play an antagonistic role in the pathogenesis of Helicobacter pylori infection. In this study, the exact mechanism of this antagonistic action was studied. MATERIALS AND METHODS: AGS, MGC803, and GES-1 cells were infected with H. pylori, intracellular distribution changes of SHP1 were first detected by immunofluorescence. SHP1 overexpression and knockdown were then constructed in these cells to investigate its antagonistic roles in H. pylori infection. Migration and invasion of infected cells were detected by transwell assay, secretion of IL-8 was examined via ELISA, the cells with hummingbird-like alteration were determined by microexamination, and activation of JAK2/STAT3, PI3K/Akt, and ERK pathways were detected by immunoblotting. Mice infection model was established and gastric pathological changes were evaluated. Finally, the SHP1 activator sorafenib was used to analyze the attenuating effect of SHP1 activation on H. pylori pathogenesis in vitro and in vivo. RESULTS: The sub-localization of SHP1 changed after H. pylori infection, specifically that the majority of the cytoplasmic SHP1 was transferred to the cell membrane. SHP1 inhibited H. pylori-induced activation of JAK2/STAT3 pathway, PI3K/Akt pathway, nuclear translocation of NF-κB, and then reduced EMT, migration, invasion, and IL-8 secretion. In addition, SHP1 inhibited the formation of CagA-SHP2 complex by dephosphorylating phosphorylated CagA, reduced ERK phosphorylation and the formation of CagA-dependent hummingbird-like cells. In the mice infection model, gastric pathological changes were observed and increased IL-8 secretion, indicators of cell proliferation and EMT progression were also detected. By activating SHP1 with sorafenib, a significant curative effect against H. pylori infection was obtained in vitro and in vivo. CONCLUSIONS: SHP1 plays an antagonistic role in H. pylori pathogenesis by inhibiting JAK2/STAT3 and PI3K/Akt pathways, NF-κB nuclear translocation, and CagA phosphorylation, thereby reducing cell EMT, migration, invasion, IL-8 secretion, and hummingbird-like changes.

Dimensional Regulation from 1D/3D to 2D/3D of Perovskite Interfaces for Stable Inverted Perovskite Solar Cells.

Constructing low-dimensional/three-dimensional (LD/3D) perovskite solar cells can improve efficiency and stability. However, the design and selection of LD perovskite capping materials are incredibly scarce for inverted perovskite solar cells (PSCs) because LD perovskite capping layers often favor hole extraction and impede electron extraction. Here, we develop a facile and effective strategy to modify the perovskite surface by passivating the surface defects and modulating surface electrical properties by incorporating morpholine hydriodide (MORI) and thiomorpholine hydriodide (SMORI) on the perovskite surface. Compared with the PI treatment that we previously developed, the one-dimensional (1D) perovskite capping layer derived from PI is transformed into a two-dimensional (2D) perovskite capping layer (with MORI or SMORI), achieving dimension regulation. It is shown that the 2D SMORI perovskite capping layer induces more robust surface passivation and stronger n-N homotype 2D/3D heterojunctions, achieving a p-i-n inverted solar cell with an efficiency of 24.55%, which retains 87.6% of its initial efficiency after 1500 h of operation at the maximum power point (MPP). Furthermore, 5 × 5 cm2 perovskite mini-modules are presented, achieving an active-area efficiency of 22.28%. In addition, the quantum well structure in the 2D perovskite capping layer increases the moisture resistance, suppresses ion migration, and improves PSCs' structural and environmental stability.

Target Therapy for Buried Interface Enables Stable Perovskite Solar Cells with 25.05% Efficiency.

The buried interface in perovskite solar cells (PSCs) is pivotal for achieving high efficiency and stability. However, it is challenging to study and optimize the buried interface due to its non-exposed feature. Here, a facile and effective strategy is developed to modify the SnO2 /perovskite buried interface by passivating the buried defects in perovskite and modulating carrier dynamics via incorporating formamidine oxalate (FOA) in SnO2 nanoparticles. Both formamidinium and oxalate ions show a longitudinal gradient distribution in the SnO2 layer, mainly accumulating at the SnO2 /perovskite buried interface, which enables high-quality upper perovskite films, minimized defects, superior interface contacts, and matched energy levels between perovskite and SnO2 . Significantly, FOA can simultaneously reduce the oxygen vacancies and tin interstitial defects on the SnO2 surface and the FA+ /Pb2+ associated defects at the perovskite buried interface. Consequently, the FOA treatment significantly improves the efficiency of the PSCs from 22.40% to 25.05% and their storage- and photo-stability. This method provides an effective target therapy of buried interface in PSCs to achieve very high efficiency and stability.

Liquid-in-Aerogel Porous Composite Allows Efficient CO2 Capture and CO2 /N2 Separation.

The pursuit of efficient CO2 capture materials remains an unmet challenge. Especially, meeting both high sorption capacity and fast uptake kinetics is an ongoing effort in the development of CO2 sorbents. Here, a strategy to exploit liquid-in-aerogel porous composites (LIAPCs) that allow for highly effective CO2 capture and selective CO2 /N2 separation, is reported. Interestingly, the functional liquid tetraethylenepentamine (TEPA) is partially filled into the air pockets of SiO2 aerogel with left permanent porosity. Notably, the confined liquid thickness is 10.9-19.5 nm, which can be vividly probed by the atomic force microscope and rationalized by tailoring the liquid composition and amount. LIAPCs achieve high affinity between the functional liquid and solid porous counterpart, good structure integrity, and robust thermal stability. LIAPCs exhibit superb CO2 uptake capacity (5.44 mmol g-1 , 75 °C, and 15 vol% CO2 ), fast sorption kinetics, and high amine efficiency. Furthermore, LIAPCs ensure long-term adsorption-desorption cycle stability and offer exceptional CO2 /N2 selectivity both in dry and humid conditions, with a separation factor up to 1182.68 at a humidity of 1%. This approach offers the prospect of efficient CO2 capture and gas separation, shedding light on new possibilities to make the next-generation sorption materials for CO2 utilization.

Deciphering the Effects of Molecular Dipole Moments on the Photovoltaic Performance of Organic Solar Cells.

The dielectronic constant of organic semiconductor materials is directly related to its molecule dipole moment, which can be used to guide the design of high-performance organic photovoltaic materials. Herein, two isomeric small molecule acceptors, ANDT-2F and CNDT-2F, are designed and synthesized by using the electron localization effect of alkoxy in different positions of naphthalene. It is found that the axisymmetric ANDT-2F exhibits a larger dipole moment, which can improve exciton dissociation and charge generation efficiencies due to the strong intramolecular charge transfer effect, resulting in the higher photovoltaic performance of devices. Moreover, PBDB-T:ANDT-2F blend film exhibits larger and more balanced hole and electron mobility as well as nanoscale phase separation due to the favorable miscibility. As a result, the optimized device based on axisymmetric ANDT-2F shows a JSC of 21.30 mA cm-2 , an FF of 66.21%, and a power conversion energy of 12.13%, higher than that of centrosymmetric CNDT-2F-based device. This work provides important implications for designing and synthesizing efficient organic photovoltaic materials by tuning their dipole moment.

Ratio-Tuning of Silica Aerogel Co-Hydrolyzed Precursors Enables Broadband, Angle-Independent, Deformation-Tolerant, Achieving 99.7% Reflectivity.

The super-white body might be defined as its reflectivity exceeding 98% at any angle in the visible light spectrum, which can be used in a variety of emerging fields including optics, energy, environment, aerospace, etc. However, elaborate synthesis of a light-weight, highly reflective super-white aerogel body remains a great challenge. In this work, fine-tuning of silica aerogel co-hydrolyzed precursor ratios, 99.7% reflectivity with angle-independence in the visible light spectrum has been successfully achieved when the areal density is only 0.129 g cm-2 , which breaks through the theoretical bandwidth limit of photonic crystals as well as the measured reflectivity limit of conventional porous materials. Furthermore, the reflectivity of super-white silica aerogel remains unchanged after various harsh deformations including compression and bending 1000 times, solar (≈800 W m-2 ), ultraviolet (≈0.68 W m-2 ), and humidity (100%) aging for 100 days, liquid nitrogen (-196 °C) and high-temperature (300 °C) thermal shock 100 times. As proofs of performance, the resulting super-white silica aerogels have been used as the novel standard white plate  for better spectrum calibration, as the flexible projector curtains for optical display, as well as the transmitted light reflective layer in the photovoltaic cell for improving the relative power conversion efficiency of 5.6%.

Spontaneous conus infarction with "snake-eye appearance" on magnetic resonance imaging: A case report and literature review.

BACKGROUND: Infarction of the conus medullaris is a rare form of spinal cord infarction. The first symptom is usually acute non-characteristic lumbar pain, followed by lower limb pain, saddle numbness, fecal incontinence, and sexual dysfunction. Spontaneous conus infarction with "snake-eye appearance" on magnetic resonance imaging has rarely been reported. CASE SUMMARY: We report a 79-year-old male patient with spontaneous conus infarction who had acute lower extremity pain and dysuria as the first symptoms. He did not have any recent history of aortic surgery and trauma. Magnetic resonance imaging revealed a rare "snake-eye appearance." In addition, we reviewed the literature on 23 similar cases and summarized the clinical features and magnetic resonance manifestations of common diseases related to the "snake-eye sign" to explore the etiology, imaging findings, and prognosis of spontaneous conus infarction. CONCLUSION: We conclude that acute onset of conus medullaris syndrome combined with "snake-eye appearance" should be strongly suspected as conus medullaris infarction caused by anterior spinal artery ischemia. This special imaging manifestation is helpful in the early diagnosis and treatment of conus infarction.

A case of recurrent intracranial hemorrhage in CADASIL caused by NOTCH3 c.1759C>T heterozygous mutation.

BACKGROUND: Cerebral autosomal-dominant arteriopathy with subcortical infarcts and leukoencephalopathy (CADASIL) is a cerebrovascular disease that is closely related to the NOTCH3 gene. Recurrent ischemic stroke, progressive cognitive dysfunction, and mental symptoms are the main clinical manifestations, whereas symptomatic intracranial hemorrhage is rare. METHODS: We detected a heterozygous mutation of c.1759C>T in exon 11 of the NOTCH3 gene that caused recurrent intracranial hemorrhage in CADASIL. RESULTS: Second-generation sequencing of a sample of the patient's genome revealed a heterozygous mutation of c.1759C>T in exon 11 of NOTCH3, which resulted in amino acid changes (p.R587C). This variation may be rated as a CADASIL clinical variation. CONCLUSION: The discovery of this mutation site provides an important theoretical basis for a gene-based diagnosis and treatment of recurrent intracranial hemorrhage.

Early growth response 1 promoted the invasion of glioblastoma multiforme by elevating HMGB1.

BACKGROUND: Glioblastoma multiforme (GBM) is the most common and deadly glioma subtype. Early growth response 1 (EGR1) participates in the progression of several cancer types, but the expression and function of EGR1 in GBM was rarely investigated. METHODS: The expressions of EGR1 in GBM were detected with qRT-PCR and immunohistochemistry in 12 pairs of fresh GBM tissues and 116 paraffin-embedded specimens. The patients were divided into high and low EGR1 groups according to the IHC score of EGR1, and the prognostic significances of different groups were evaluated with univariate and multivariate analyses. With in-vitro experiments, we assessed the role of EGR1 in the proliferation and invasion of GBM cells. RESULTS: In our study, EGR1 was up-regulated in GBM tissues compared with tumor-adjacent normal tissues. High expression of EGR1 or HMGB1 were unfavorable prognostic biomarkers of GBM. Coexpression of EGR1 and HMGB1 could predict the prognosis of GBM more sensitively. EGR1 facilitated the proliferation and invasion of GBM cells. Moreover, EGR1 promoted the invasion, instead of proliferation, of GBM cells by elevating the expression of HMGB1. CONCLUSIONS: ERG1 was a prognostic biomarker of GBM, and ERG1 and HMGB1 synergistically could predict the GBM prognosis more precisely. ERG1 could promote GBM cell invasion by inducing HMGB1 expression.

Green-Solvent-Processable Low-Cost Fluorinated Hole Contacts with Optimized Buried Interface for Highly Efficient Perovskite Solar Cells.

Solution-processed hole contact materials, as an indispensable component in perovskite solar cells (PSCs), have been widely studied with consistent progress achieved. One bottleneck for the commercialization of PSCs is the lack of hole contact materials with high performance, cost-effective preparation, and green-solvent processability. Therefore, the development of versatile hole contact materials is of great significance. Herein, we report two novel donor-acceptor (D-A)-type hole contact molecules (FMPA-BT-CA and 2FMPA-BT-CA) with low cost and alcohol-based processability by utilizing a fluorination strategy. We showed that the fluorine atoms lead to the lowered highest occupied molecular orbital (HOMO) energy levels and larger dipole moments for FMPA-BT-CA and 2FMPA-BT-CA. Moreover, fluorination also improves the buried interfacial interaction between hole contacts and perovskite. As a result, a remarkable power conversion efficiency (PCE) of 22.37% along with good light stability could be achieved for green-solvent-processed FMPA-BT-CA-based inverted PSC devices, demonstrating the great potential of environmentally compatible hole contacts for highly efficient PSCs.

PTBP-1 and TNF-α/NF-κB are involved in repair mechanisms of human umbilical cord mesenchymal stem cell transplantation in mice with spinal cord injury.

OBJECTIVES: To explore the possible mechanism of human umbilical cord mesenchymal stem cell (hUC-MSC) transplantation in mice after spinal cord hemisection. METHODS: Thoracic spinal cord hemisection injuries were performed on adult female Kunming mice. The mice with spinal cord injury (SCI) were injected with hUC-MSCs suspended in normal saline, while the control mice received an equal volume of normal saline. The histological HE staining and Nissl staining were performed 4 and 8 weeks after hUC-MSC transplantation in SCI mice. The Basso-Beattie-Bresnahan (BBB) locomotor rating scale was used to assess functional recovery after SCI. Western blotting was performed to determine the protein expressions. RESULTS: hUC-MSCs transplantation decreased cavitation and tissue loss and increased the number of Nissl bodies in the damaged areas of the spinal cord after 4 and 8 weeks. The BBB locomotor performance of the transplanted mice was significantly improved (P<0.01). The wet weight of the injured side of the gastrocnemius muscle was significantly higher in the transplant group than that in the control group. Western blotting showed that TUJ1 and Olig2 expressions were significantly higher in hUC-MSC-grafted mice than those in vehicle controls. Three days after hUC-MSC transplantation, the expressions of TNF-α and NF-κB were higher in MSC-grafted mice than those in vehicle controls. However, 4 weeks after stem cell transplantation, the expressions of these two factors decreased in hUC-MSC-grafted mice compared with those in the vehicle controls. At 8 weeks after hUC-MSC transplantation, the expression of PTBP-1 was decreased in hUC-MSC-grafted mice compared with that in vehicle controls. CONCLUSIONS: hUC-MSC transplantation can protect neuron survival, promote myelin repair, and control glial scar formation in SCI mice.

Interfacial Passivation Engineering for Highly Efficient Perovskite Solar Cells with a Fill Factor over 83.

Charge carrier nonradiative recombination (NRR) caused by interface defects and nonoptimal energy level alignment is the primary factor restricting the performance improvement of perovskite solar cells (PSCs). Interfacial modification is a vital strategy to restrain NRR and enable high-performance PSCs. We report here two interfacial materials, PhI-TPA and BTZI-TPA, consisting of phthalimide and a 2,1,3-benzothiadiazole-5,6-dicarboxylicimide core, respectively. The difunctionalized BTZI-TPA with imide and thiadiazole shows higher hole mobility, better aligned energy levels, and stronger interaction with uncoordinated Pb2+ on the perovskite surface, suppressing NRR and carrier accumulation at the interface of perovskite/spiro-OMeTAD and yielding enhanced open-circuit voltage and fill factor. Consequently, the PSC based on BTZI-TPA delivers a high efficiency of 24.06% with an excellent fill factor of 83.10%, superior to that (21.47%) of the reference cell without an interfacial layer, and 21.45% efficiency for the device with a scaled-up area (1.00 cm2). These results underscore the potential of imide and thiadiazole groups in developing interfacial layers with strong passivation capability, effective charge transport property, and fine-tuned energetics for stable and efficient PSCs.

Distanct ischemic postconditioning in acute mild to moderate ischemic stroke: A randomized clinical study.

OBJECTIVE: Distant ischemic postconditioning (DIPC) has been confirmed to have a neuroprotective effect in animal models of ischemia. However, there are only a few studies on its efficacy and safety in clinical applications. METHOD: We divided 86 patients with acute non-cardiogenic mild to moderate cerebral infarction into DIPC and control groups. RESULT: After 7 days of using different pressure DIPC therapies, the National Institutes of Health Stroke Scale (NIHSS) scores on the eighth day significantly decreased, and modified Rankin scale significantly increased in the DIPC group, compared to that before treatment. On the eight day of admission, the decrease in the NIHSS scores significantly differed between the two groups. However, there was no change in the early neurological deterioration and platelet aggregation rates between the two groups on the eighth day. CONCLUSION: These results demonstrate that DIPC can safely and effectively improve neurological deficits in acute stages of mild to moderate cerebral infarction without affecting the efficacy of antiplatelet drugs.

Oceanospirillum sediminis sp. nov., Isolated From Coastal Sediment in the Yellow Sea.

A novel Gram-negative, motile, aerobic, spiral-shaped bacterium designated D5T, was isolated from a coastal sediment collected in the Yellow Sea. Optimal growth occurred at 30 °C, pH 7.0-8.0 and in the presence of 1-3% (w/v) NaCl. Strain D5T contained ubiquinone 8 (Q-8) as the predominant respiratory quinone. The major fatty acids (> 10%) were C16:0, C16:1 ω7c/C16:1 ω6c and C18:1w7c/C18:1w6c. The main polar lipids were phosphatidylglycerol and phosphatidylethanolamine. The draft genome is 5.6 Mb in length, and DNA G + C content is 47.2 mol%. 16S rRNA gene sequences showed that strain D5T is most closely related to Oceanospirillum beijerinckii NBRC 15445T (97.8%, sequence similarity). However, the digital DNA-DNA hybridization (dDDH) value and average nucleotide identity (ANI) between strain D5T and O. beijerinckii is only 27.8% and 77.1%. Phylogenetic trees based on 16S rRNA gene sequences and whole genomes all indicated that strain D5T formed a separate branch in the genus Oceanospirillum. Combined results of the polyphasic analyses suggested that strain D5T represents a novel species in the genus Oceanospirillum, for which the name Oceanospirillum sediminis sp. nov. is proposed. The type strain is D5T (= MCCC 1K06061T = KCTC 62987T).

Elaborate Size-Tuning of Silica Aerogel Building Blocks Enables Laser-Driven Lighting.

Silica aerogels with accurate building-block control are realized by adjusting the surfactant concentration during the synthesis process. The resulting silica-aerogel monolith with spherical building blocks of ≈24-40 nm, together with a deliberately created hole along the incident light direction, shows an incredibly promising application in monochromatic laser-driven lighting. The resulting coefficient of illuminance variation is as low as 8.1%, significantly outperforming commercially available ground-glass diffusers (139.0%) and polymer diffusers (249.1%); the speckle contrast is lower, as well as better, than that can be recognized by the human eye (4%), and the illuminance uniformity in the range of 0.770-0.862 is much better (higher) than that indoor workplace lighting required by the International Organization for Standardization. Lighting with any color in the visible spectrum, including white, can be obtained by using three primary color lasers (450, 532, and 638 nm) with different powers simultaneously as the light source. The resulting silica aerogel, which has excellent thermal stability, high laser-damage threshold, outstanding mechanical performance, and superhydrophobicity, can be further applied to long-distance and noncontact laser-driven lighting in rain or underwater without any additional encapsulation components.

A novel heterozygous HTRA1 mutation in an Asian family with CADASIL-like disease.

BACKGROUND: HTRA1 gene mutations are related to the pathogenesis of cerebral autosomal recessive arteriopathy with subcortical infarcts and leukoencephalopathy (CARASIL). However, heterozygous HTRA1 mutations at specific sites can also lead to rare autosomal dominant cerebral artery disease (CADASIL-like disease). To date, 28 heterozygous mutations in the HTRA1 gene have been reported to be related to CADASIL-like diseases. Only one case of this disease was caused by a heterozygous mutation of c.497G>T in exon 2 of the HTRA1 gene. METHODS: In this case, we report on an Asian family with CADASIL-like disease caused by a heterozygous mutation of c.497G>T in exon 2 of the HTRA1 gene. The clinical and imaging characteristics of the proband were summarized, and gene mutations were verified by whole-exome sequencing (WES) and direct Sanger sequencing. RESULTS: The result of the gene sequencing showed a heterozygous missense mutation at the c.497G>T locus of the HTRA1 gene in the proband of one sick family member, resulting in a change in amino acid (p.arg166leu). CONCLUSION: This is the first reported pathogenic mutation at the c.497G>T locus of the HTRA1 gene in an Asian population. It provides an important theoretical basis for the specific gene-based diagnosis and treatment of CADASIL-like diseases.

Physiological and Proteomic Responses of Contrasting Alfalfa (Medicago sativa L.) Varieties to High Temperature Stress.

High temperature (HT) is an important factor for limiting global plant distribution and agricultural production. As the global temperature continues to rise, it is essential to clarify the physiological and molecular mechanisms of alfalfa responding the high temperature, which will contribute to the improvement of heat resistance in leguminous crops. In this study, the physiological and proteomic responses of two alfalfa (Medicago sativa L.) varieties contrasting in heat tolerance, MS30 (heat-tolerant) and MS37 (heat-sensitive), were comparatively analyzed under the treatments of continuously rising temperatures for 42 days. The results showed that under the HT stress, the chlorophyll content and the chlorophyll fluorescence parameter (Fv/Fm) of alfalfa were significant reduced and some key photosynthesis-related proteins showed a down-regulated trend. Moreover, the content of Malondialdehyde (MDA) and the electrolyte leakage (EL) of alfalfa showed an upward trend, which indicates both alfalfa varieties were damaged under HT stress. However, because the antioxidation-reduction and osmotic adjustment ability of MS30 were significantly stronger than MS37, the damage degree of the photosynthetic system and membrane system of MS30 is significantly lower than that of MS37. On this basis, the global proteomics analysis was undertaken by tandem mass tags (TMT) technique, a total of 6,704 proteins were identified and quantified. Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis indicated that a series of key pathways including photosynthesis, metabolism, adjustment and repair were affected by HT stress. Through analyzing Venn diagrams of two alfalfa varieties, 160 and 213 differentially expressed proteins (DEPs) that had dynamic changes under HT stress were identified from MS30 and MS37, respectively. Among these DEPs, we screened out some key DEPs, such as ATP-dependent zinc metalloprotease FTSH protein, vitamin K epoxide reductase family protein, ClpB3, etc., which plays important functions in response to HT stress. In conclusion, the stronger heat-tolerance of MS30 was attributed to its higher adjustment and repair ability, which could cause the metabolic process of MS30 is more conducive to maintaining its survival and growth than MS37, especially at the later period of HT stress. This study provides a useful catalog of the Medicago sativa L. proteomes with the insight into its future genetic improvement of heat-resistance.

Metagenomic profiling reveals dominance of gram-positive bacteria in the gut microbiome shifts associated with immunoglobulin A vasculitis (Henoch-Schönlein Purpura).

OBJECTIVES: Immunoglobulin A vasculitis (IgAV), previously known as Henoch-Schönlein purpura, is the most common vasculitis that has a classical skin manifestation of palpable purpuric rash. Factors pertinent to IgAV remain inadequately understood. Here, we aimed to examine the gut microbiome shifts associated with IgAV and its recovery. METHODS: Stool samples were collected from 10 children with IgAV (6-14 years old) before and after a multi-drug therapy, along with 9 age-matched healthy children. The samples were subjected to metagenomic analyses to investigate the taxonomic and functional shifts of the gut microbiome. RESULTS: The analyses revealed that compared with healthy controls, treatment-naïve patients exhibited substantial taxonomic and functional alterations of gut microbiota, including 104 IgAV-depleted species and 7 IgAV-elevated species (FDR < 0.05). After treatment, the IgAV patients displayed a partial restoration of the microbiota shifts, as the relative abundances of some biomarkers (e.g. 9 genera and 22 species) became comparable (FDR > 0.1) between the patients and healthy controls. The treatment-responsive features included Weissella, Faecalibacterium prausnitzii and Bifidobacterium pseudocatenulatum and three components of a putative glutamine transport system. Importantly, gram-positive bacteria accounted for over 85% of the numbers and total relative abundance of the species that were associated with IgAV and responsive to the treatment. In addition, of the 122 IgAV-depleted bacterial genes, 82 were mainly contributed by gram-positive bacteria and 12 by gram-negative bacteria. CONCLUSIONS: Gram-positive bacteria are the main drivers underlying the gut microbiome shifts of IgAV, which may assist rational management of the disease.