ABSTRACT
Extrusion is typically employed to prepare resistant starch (RS). However, the process is complicated. In this study, the effects of twin-screw extrusion on the crystallinity, thermal properties, and functional properties of starch formed in different extrusion zones were investigated. The effects of this process on the rheological properties and microstructure of RS-added skimmed yogurt were also studied. According to the results, the RS content increased from 7.40 % in the raw material to 33.79 % in the extrudate. The A-type crystal structure of the starch was not observed. The dissociation temperature of the extruded starch ranged from 87.76 °C to 100.94 °C. The glycemic index (GI) of skimmed yogurt fortified with 0.4 % RS was 48.7, and the viscosity was also improved. The microstructure exhibited a uniform network of the starch-protein structure. The findings may serve as a theoretical basis for the application of RS in the food industry.
Subject(s)
Oryza , Resistant Starch , Oryza/chemistry , Yogurt , Starch/chemistry , TemperatureABSTRACT
This multiscale study aimed to evaluate the effects of different salts (NaCl, KCl, MgCl2, and CaCl2) on the foaming capacity (FC) and foam stability (FS) of model protein systems (MPS) for infant formula via changes in surface and structural properties. Our results showed that the FC and FS of MPS were increased with the addition of NaCl, KCl, and MgCl2, whereas CaCl2 significantly decreased FC (79.5 ± 10.6%) and increased FS (93.2 ± 2.2%). The surface hydrophobicity was increased and the net charge and surface tension were reduced after the addition of salts. Structural analysis revealed the reduction of intensity of intrinsic fluorescence spectroscopy and UV absorption, and the conversion of α-helix into ß-strand, which was attributed to protein agglomeration. Additionally, MgCl2 and CaCl2 exhibited larger size and lower net charge compared with NaCl and KCl, indicating a greater ability to bind to charged amino acids and form larger aggregates. Correlation analysis indicated that FC was positively related to adsorbed protein and ß-turn and negatively correlated with particle size. In addition, FS showed a positive correlation with ß-strand, apparent viscosity, and zeta potential. However, it exhibited a negative correlation with ß-turn, α-helix, and sulfhydryl content. These results provide a theoretical reference for further understanding of the effect of salts on the foaming properties of MPS.
ABSTRACT
To study the fatigue failure and microstructure evolution behavior of SS304, low-cycle fatigue tests are conducted at room temperature (RT), 300 °C, and 650 °C. The results indicate that, because of the influence of the dislocation walls, carbon-containing precipitates, and deformation twins, the cyclic hardening behavior is presented at RT. However, different from the cyclic hardening behavior at RT, the cyclic softening behavior of SS304 can be observed due to the dynamic recovery and recrystallization containing dislocation rearrangement and annihilation at 300 °C and 650 °C. In addition, two fatigue crack initiation modes are observed. At RT, the single fatigue crack initiation mode is observed. At high temperatures, multiple crack initiation modes are presented, resulting from the degradation of material properties. Furthermore, a new fatigue life prediction model considering the temperature is conducted as a reference for industrial applications.
ABSTRACT
Introduction: Thin endometrium leads to an impaired implantation rate. The aim of the study is to compare the clinical outcomes of tamoxifen (TAM) and hormone replacement therapy (HRT) used in patients with thin endometrium (<7mm) in frozen-thawed embryo transfer (FET)cycles. Methods: A total of 176 FET cycles with thin endometrium were retrospectively analyzed in our center from Jan 2020 to May 2022. According to patients' own will, 112 patients were allocated to the HRT group and 64 patients chose the TAM protocol. Clinical outcomes were compared between two groups. Result: The duration of treatment was shorter in the TAM group(12.03±2.34d) than the HRT group (16.07±2.52 d), which was statistically different (p<0.05). The endometrial thickness on the transfer day of the TAM group (7.32±1.28 mm) was significantly thicker than that of the HRT group (6.85±0.89mm, p<0.05). The clinical pregnancy rate of the TAM group (50.0%) was higher than that of the HRT group (36.6%), but there was no significant difference (p >0.05). The early miscarriage rate was significantly lower in the TAM group compared with the HRT group (5.9% Vs 26.8%, adjusted OR 0.10, p<0.05), while the live birth rate was higher in the TAM group (46.9% Vs 26.8%, adjusted OR 2.24, p<0.05) compared with the HRT group. Conclusion: For patients with thin endometrium, TAM effectively improved the endometrial thickness and increased the live birth rate. TAM can be used as an alternative protocol for patients with thin endometrium.
Subject(s)
Abortion, Spontaneous , Female , Pregnancy , Humans , Retrospective Studies , Embryo Transfer , Endometrium , Tamoxifen/therapeutic useABSTRACT
Quercetin (Que), a health-promoting polyphenol, has limited applicability in food products due to its susceptibility to degradation in the gastrointestinal tract. To overcome this problem, Que-loaded emulsion gels were produced using whey protein isolate (WPI) and hyaluronic acid (HA) by combining heating and CaCl2 treatment. The effects of HA addition on the structural and rheological properties of the emulsion gels were evaluated, and the protective effect of the gel on Que under simulated digestion was investigated in vitro. Microstructural observations indicated that HA leads to a more compact and uniform network structure, which significantly enhances the textural and rheological properties of emulsion gels. In vitro digestion experiments revealed that WPI-HA emulsion gels exhibited a higher Que bioaccessibility (55.01%) compared to that produced by WPI alone (21.26%). This innovative delivery carrier has potential applications in food products to accomplish sustained nutrient release along with improved stability.
Subject(s)
Hyaluronic Acid , Quercetin , Emulsions/chemistry , Whey Proteins/chemistry , Gels/chemistryABSTRACT
The effect of strain rate and temperature on the thermomechanical behavior and microstructure of MarBN steel is studied with the strain rates of 5 × 10-3 and 5 × 10-5 s-1 from room temperature (RT) to 630 °C. At high strain rates of 5 × 10-3 s-1, the Holloman and Ludwigson equations can better predict tensile plastic properties. In contrast, under low strain rates of 5 × 10-5 s-1, coupling of the Voce and Ludwigson equations appears to predict the flow relationship at RT, 430, and 630 °C. However, the deformation microstructures have the same evolution behavior under strain rates and temperatures. Geometrically necessary dislocations appear along the grain boundaries and increase the dislocation density, which results in the formation of the low-angle grain boundaries and a decrease in the number of twinning. The strengthening sources of MarBN steel include grain boundary strengthening, dislocation interactions, and multiplication. The fitted R2 values of these models (JC, KHL, PB, VA, ZA) to plastic flow stress at 5 × 10-5 s-1 are greater than 5 × 10-3 s-1 for MarBN steel. Due to the flexibility and minimum fitting parameters, the phenomenological models of JC (RT and 430 °C) and KHL (630 °C) give the best prediction accuracy under both strain rates.
ABSTRACT
The uniaxial tensile behavior of MarBN steel with a constant strain rate of 5 × 10-5 s-1 under various temperatures ranging from room temperature to 630 °C was analyzed. This study aimed to identify the effect of the temperature on the tensile behavior and to understand the microstructure deformation by electron backscatter diffraction. The tensile results showed that the yield and ultimate tensile strength decreased with increasing temperature. Serrated flow was observed from 430 °C to 630 °C. The electron backscatter diffraction analysis showed that the low-angle grain boundaries decreased at the medium deformation and increased at the maximum deformation. In contrast, they decreased with increasing temperatures. In addition, the number of voids increased with the increasing plastic strain. As the strain increased, the voids joined together, and the tiny cracks became larger and failed. Three mechanisms were responsible for the tensile deformation failure at various temperatures: grain rotation, the formation and rearrangement of low angle grain boundaries, and void nucleation and propagation. Finally, the formation of the low-angle grain boundaries and voids under different degrees of deformation is discussed.
ABSTRACT
This study aimed to prepare an emulsion stabilised by an ultrasound-treated casein (CAS)-hyaluronic acid (HA) complex and to protect vitamin E during in vitro digestion. It was found that high-intensity ultrasound (HIU) treatment significantly changed the hydrogen bonding, electrostatic interaction and hydrophobic interaction between CAS and HA, reduced the particle size of the CAS-HA complex, increased the intermolecular electrostatic repulsion, and thus significantly improved the emulsifying properties of the CAS-HA complex. Meanwhile, the creaming index (CI) and confocal laser scanning microscopy images showed that the stability of the CAS-HA-stabilised emulsion was the best when treated at 150 W for 10 min, which could be attributed to the enhanced adsorption capacity of the CAS-HA complex at the oil-water interface and the viscosity of the formed emulsion. In vitro digestion experiments revealed that the emulsion stabilised by the ultrasound-treated CAS-HA complex had a good protective effect on vitamin E. This study is significant for the development of emulsions for the delivery of lipophilic nutrients.
Subject(s)
Caseins , Hyaluronic Acid , Emulsions/chemistry , Caseins/chemistry , Viscosity , Particle Size , Water/chemistryABSTRACT
This study assessed the alteration of IgE-reactivity and functional attribute in soy protein 7S-proanthocyanidins conjugates (7S-80PC) formed by alkali-heating treatment (pH 9.0, 80 °C, 20 min). SDS-PAGE demonstrated that 7S-80PC exhibited the formation of >180 kDa polymers, although the heated 7S (7S-80) had no changes. Multispectral experiments revealed more protein unfolding in 7S-80PC than in 7S-80. Heatmap analysis showed that 7S-80PC showed more alteration of protein, peptide and epitope profiles than 7S-80. LC/MS-MS demonstrated that the content of total dominant linear epitopes was increased by 11.4 % in 7S-80, but decreased by 47.4 % in 7S-80PC. As a result, Western-blot and ELISA showed that 7S-80PC exhibited lower IgE-reactivity than 7S-80, probably because 7S-80PC exhibited more protein-unfolding to increase the accessibility of proanthocyanidins to mask and destroy the exposed conformational epitopes and dominant linear epitopes induced by heating treatment. Furthermore, the successful attachment of PC to soy 7S protein significantly increased antioxidant activity in 7S-80PC. 7S-80PC also showed higher emulsion activity than 7S-80 owing to its high protein flexibility and protein unfolding. However, 7S-80PC exhibited lower foaming properties than 7S-80. Therefore, the addition of proanthocyanidins could decrease IgE-reactivity and alter the functional attribute of the heated soy 7S protein.
Subject(s)
Proanthocyanidins , Soybean Proteins , Soybean Proteins/chemistry , Heating , Proteomics , Epitopes/chemistry , Immunoglobulin EABSTRACT
This study aimed to investigate the effect of non-covalent interactions between different concentrations (0.1-1.2 %, w/v) of hyaluronic acid (HA) and 3 % (w/v) whey protein isolate (WPI) on the stability of oil-in-water emulsions. Non-covalent interactions between WPI and HA were detected using Fourier-transform infrared spectroscopy. The addition of HA increased the electrostatic repulsion between molecules and reduced the particle size of WPI. Circular dichroism spectroscopy results indicated that the addition of HA caused an increase in ß-sheet content and a decrease in α-helix and random coil content in WPI. Moreover, HA increased the emulsion viscosity and strength of the interfacial network structure. Micrographs obtained using confocal laser scanning microscopy indicated that the emulsion with 0.8 % (w/v) HA exhibited good dispersion and homogeneity after storage for 14 d. Complexation with HA significantly altered the rheological and emulsifying properties of WPI, providing an emulsion with excellent stability under heating treatment, freeze-thawing treatment and centrifugation. The results provide a potential for HA application in emulsified foods.
Subject(s)
Hyaluronic Acid , Water , Emulsions/chemistry , Whey Proteins/chemistry , Viscosity , Water/chemistryABSTRACT
This study evaluated the impact of proanthocyanidins on immunoglobulin E (IgE) binding capacity, antioxidant, foaming and emulsifying properties in soy 11S protein following alkali treatment at 80 °C for 20 min. The formation of >180 kDa polymer was observed in the combined heating and proanthocyanidins-conjugation treatment sample (11S-80PC) rather than in the heating treated sample (11S-80) using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The structural analyzes demonstrated that 11S-80PC exhibited more protein unfolding than 11S-80. Heatmap analysis revealed that 11S-80PC had more alteration of peptide and epitope profiles in 11S than in 11S-80. Molecular docking showed that PC could well react with soy protein 11S. Liquid chromatography tandem MS analysis (LC/MS-MS) demonstrated that there was a 35.6 % increase in 11S-80, but a 14.5 % decrease in 11S-80PC for the abundance of total linear epitopes. As a result, 11S-80PC exhibited more reduction in IgE binding capacities than 11S-80 owing to more obscuring and disruption of linear and conformational epitopes induced by structural changes. Moreover, 11S-80PC exhibited higher antioxidant capacities, foaming properties and emulsifying activity than 11S-80. Therefore, the addition of proanthocyanidins could decrease allergenic activity and enhance the functional properties of the heated soy 11S protein.
Subject(s)
Proanthocyanidins , Soybean Proteins , Soybean Proteins/chemistry , Immunoglobulin E , Proteomics , Molecular Docking Simulation , Heating , Antioxidants , Epitopes/chemistryABSTRACT
Due to the high performance and low cost, spintronic terahertz emitters (STEs) have been a hot topic in the field of terahertz sources. However, most of the research focuses on the THz generation process and little attention has been paid to the control and modulation of the THz wave generated by the STE. In this Letter, a unidirectional spintronic terahertz emitter (USTE) integrating a common STE with a metal grating is proposed to manipulate the THz emission process. The dyadic Green's function method and finite element method are adopted to survey the characteristics of the USTE. Simulations show that the metal grating not only has a transmission larger than 97% in the optical band, but also has a higher reflectivity larger than 99% in the THz band. As a result, the USTE has a unidirectional THz emission along the direction of the pump beam with a larger than 4-fold enhancement in intensity. Moreover, the USTE has the capability of tuning the central frequency and THz wave steering by adjusting the distance and angle between the STE and the metal grating. We believe that this USTE can be used in THz wireless communications and holographic imaging, especially in the field of THz bio-sensing, which needs some resonance frequencies to sense.
ABSTRACT
To reduce harmful gas emission and improve the operational efficiency, advanced ultra-supercritical power plants put forward higher requirements on the high temperature mechanical properties of applied materials. In this paper, the tensile behavior and deformation mechanisms of MarBN steel are discussed at different strain rates (5 × 10-3 s-1, 5 × 10-4 s-1, and 5 × 10-5 s-1) under room temperature and 630 °C. The results show that the tensile behavior of the alloy is dependent on temperature and strain rate, which derived from the balance between the average dislocation velocity and dislocation density. Furthermore, observed dynamic recrystallized grains under severe deformation reveal the existence of dynamic recovery at 630 °C, which increases the elongation compared to room temperature. Finally, three typical constitutive equations are used to quantitatively describe the tensile deformation behavior of MarBN steel under different strain rates and temperatures. Meanwhile, the constitutive model of flow stress for MarBN steel is developed based on the hyperbolic sine law.
ABSTRACT
This study was to explore whether postponing frozen embryo transfers (FET) after oocyte pickup (OPU) improves clinical and neonatal outcomes. From May 2018 to Dec 2020, a total of 1109 patients underwent their first OPU cycles adopting a non-selective freeze-all policy were included in this retrospective cohort study. In the immediate group (n=219), patients underwent FET in the first menstrual cycle after OPU, and patients in the postponed group (n=890) waited for more than 1 menstrual cycle after OPU to perform FET. A propensity score matching (PSM) model was used to evaluate the clinical outcomes and neonatal outcomes between the two groups. There were 209 patients in the immediate group and 499 patients in the postponed one after PSM. Patients waited for a significantly shorter period for FET in the immediate group (30.74 ± 3.85 days) compared with the postponed group (80.39 ± 26.25 days, P<0.01). The clinical pregnancy rate (CPR) and live birth rate (LBR) in the immediate group were 58.4% and 48.3%, respectively, which were comparable to those of the postponed one (58.1%, 49.7%, P > 0.05). No statistical significance was found in the average birth weight (3088.82 ± 565.35 g vs 3038.64 ± 625.78 g, P > 0.05) and height (49.08 ± 1.87 cm vs 49.30 ± 2.52 cm) of neonates between the two groups. The gender ratio, the incidence of macrosomia and low birth weight did not differ significantly between the two groups. In conclusion, postponing FET does not improve clinical and neonatal outcomes. If patients have no contraindications, FETs should be carried out immediately after OPU.
Subject(s)
Cryopreservation , Oocyte Retrieval , Birth Weight , Embryo Transfer , Female , Humans , Pregnancy , Propensity Score , Retrospective StudiesABSTRACT
Sesame allergy is a serious public health problem and is mainly induced by IgE-mediated reactions, whose prevalence is distributed all over the world. Sesame has been included on the priority allergic food list in many countries. This review summarizes the mechanism and prevalence of sesame allergy. The characteristics, structures and epitopes of sesame allergens (Ses i 1 to Ses i 7) are included. Moreover, the detection methods for sesame allergens are evaluated, including nucleic-acid, immunoassays, mass spectrometry, and biosensors. Various processing techniques for reducing sesame allergenicity are discussed. Additionally, the potential cross-reactivity of sesame with other plant foods is assessed. It is found that the allergenicity of sesame is related to the structures and epitopes of sesame allergens. Immunoassays and mass spectrometry are the major analytical tools for detecting and quantifying sesame allergens in food. Limited technologies have been successfully used to reduce the antigenicity of sesame, involving microwave heating, high hydrostatic pressure, salt and pH treatment. More technologies for reducing the allergenicity of sesame should be widely investigated in future studies. The reduction of allergenicity in processed sesames should be ultimately confirmed by clinical studies. What's more, sesame may exhibit cross-reactivity with peanut and tree nuts.
ABSTRACT
Monk fruit extract (MFE) is widely used as a sweetener in foods. In this study, the effects of the consumption of MFE-sweetened synbiotic yogurt on the lipid biomarkers and metabolism in the livers of type 2 diabetic rats were evaluated. The results revealed that the MFE-sweetened symbiotic yogurt affected the phosphatidylcholines, phosphatidylethanolamines, phosphatidylglycerol, lysophosphatidic acids, lysophosphatidylcholines, lysophosphatidylethanolamines, lysophosphatidylglycerols, lysophosphatidylinositols, lysophosphatidylserines, and fatty acid-hydroxy fatty acids biomarkers in the livers of type 2 diabetic rats. In addition, the consumption of the MFE-sweetened synbiotic yogurt significantly altered 12 hepatic metabolites, which are involved in phenylalanine metabolism, sphingolipid metabolism, bile secretion, and glyoxylate and dicarboxylate metabolism in the liver. Furthermore, a multiomics (metabolomic and transcriptomic) association study revealed that there was a significant correlation between the MFE-sweetened synbiotic yogurt and the metabolites and genes involved in fatty acid biosynthesis, bile secretion, and glyoxylate and dicarboxylate metabolism. The findings of this study will provide new insights on exploring the function of sweeteners for improving type 2 diabetes mellitus liver lipid biomarkers.
Subject(s)
Cucurbitaceae , Diabetes Mellitus, Experimental , Diabetes Mellitus, Type 2 , Rodent Diseases , Synbiotics , Animals , Biomarkers/metabolism , Diabetes Mellitus, Type 2/metabolism , Diabetes Mellitus, Type 2/veterinary , Fatty Acids/metabolism , Fruit/chemistry , Glyoxylates/metabolism , Glyoxylates/pharmacology , Lipid Metabolism , Lipids/pharmacology , Liver/metabolism , Plant Extracts/pharmacology , Rats , Rodent Diseases/metabolism , Sweetening Agents/analysis , Yogurt/analysisABSTRACT
Monk fruit extract (MFE) is a natural sweetener that has been used as an ingredient of food and pharmaceutical products. The effects of feeding synbiotic yogurt fortified with MFE to rats with type 2 diabetes induced by high-fat diet and streptozotocin on serum lipid levels and hepatic AMPK signaling pathway were evaluated. Results showed that oral administration of the synbiotic yogurt fortified with MFE could improve serum lipid levels, respiratory exchange rate, and heat level in type 2 diabetic rats. Transcriptome analysis showed that synbiotic yogurt fortified with MFE may affect the expression of genes involved in binding, catalytic activity, and transporter activity. The Kyoto Encyclopedia of Genes and Genomes enrichment analysis revealed that these differentially expressed genes were related to AMPK signaling pathway, linoleic acid metabolism, and α-linolenic acid metabolism. Western blotting confirmed that synbiotic yogurt fortified with MFE could activate AMPK signaling and improve the protein level of the hepatic gluconeogenic enzyme G6Pase in diabetic rats. The results indicated that MFE could be a novel sweetener for functional yogurt and related products.
Subject(s)
AMP-Activated Protein Kinases/metabolism , Cucurbitaceae , Diabetes Mellitus, Type 2/metabolism , Lipids/blood , Liver/enzymology , Synbiotics , Yogurt , Animals , Body Weight , Diabetes Mellitus, Type 2/diet therapy , Diabetes Mellitus, Type 2/prevention & control , Gene Expression Profiling , Glucose-6-Phosphatase/metabolism , Intracellular Signaling Peptides and Proteins/metabolism , Linoleic Acid/metabolism , Male , Phosphoenolpyruvate Carboxykinase (GTP)/metabolism , Plant Extracts , Rats , Respiration , Signal Transduction , Sweetening Agents , alpha-Linolenic Acid/metabolismABSTRACT
A yogurt using monk fruit extract (MFE) as a sweetener was developed. The aim of the study was to investigate the viability of using MFE to develop sweetened yogurts without the calories of added sugar. The physiochemical, rheological, microstructural, and antioxidant properties of yogurt were studied. Rheological results showed that MFE affected the yogurt fermentation process and its rheological properties. Yogurt sweetened with MFE had similar microstructural properties to yogurt sweetened with sucrose. Yogurt with MFE showed higher levels of gly-pro-p-nitroanilide and dipeptidyl peptidase IV inhibitory activities, 1,1-diphenyl-2-picrylhydrazyl radical scavenging capacity, α-glucosidase inhibitory activities, and superoxide anion radical scavenging ability compared with other yogurt samples. Results indicated that MFE could be a novel sweetener and a food antioxidant for functional yogurt and related products.
Subject(s)
Antioxidants/analysis , Food, Fortified/analysis , Plant Extracts/chemistry , Sweetening Agents/analysis , Yogurt/analysis , Chemical Phenomena , Cryoelectron Microscopy , Fermentation , Fruit/chemistry , Humans , Hydrogen-Ion Concentration , Microscopy, Electron, Scanning , Rheology , Sucrose/analysisABSTRACT
We developed a synbiotic yogurt using monk fruit extract as a sweetener and investigated the effects of feeding the yogurt to rats with type 2 diabetes induced by streptozotocin and a high-fat diet. The rats fed the synbiotic yogurt showed greater blood glucose regulation and a significant decrease in insulin resistance and glycosylated hemoglobin compared with rats fed yogurt sweetened with sucrose, and they showed a remarkable improvement in short-chain fatty acid levels and gut microbiota status. Liver and kidney damage was also ameliorated in the rats fed the synbiotic yogurt. Immunohistochemistry analysis showed that the synbiotic yogurt inhibited ß-cell loss compared with the control yogurt. Consuming the synbiotic yogurt helped to restore the islets of Langerhans. Our results indicated that monk fruit extract may be a good alternative to sucrose for synbiotic yogurt products in people with type 2 diabetes to delay the progression of diabetes and associated complications.
Subject(s)
Cucurbitaceae/chemistry , Diabetes Mellitus, Type 2/drug therapy , Gastrointestinal Microbiome/drug effects , Plant Extracts/pharmacology , Sweetening Agents/pharmacology , Yogurt , Animals , Diet, High-Fat , Fruit/chemistry , Insulin Resistance , Liver/pathology , Male , Rats , Rats, Wistar , Synbiotics , Yogurt/analysisABSTRACT
BACKGROUND: Mechanical ventilation worsens acute respiratory distress syndrome, but this secondary "ventilator-associated" injury is variable and difficult to predict. The authors aimed to visualize the propagation of such ventilator-induced injury, in the presence (and absence) of a primary underlying lung injury, and to determine the predictors of propagation. METHODS: Anesthetized rats (n = 20) received acid aspiration (hydrochloric acid) followed by ventilation with moderate tidal volume (V(T)). In animals surviving ventilation for at least 2 h, propagation of injury was quantified by using serial computed tomography. Baseline lung status was assessed by oxygenation, lung weight, and lung strain (V(T)/expiratory lung volume). Separate groups of rats without hydrochloric acid aspiration were ventilated with large (n = 10) or moderate (n = 6) V(T). RESULTS: In 15 rats surviving longer than 2 h, computed tomography opacities spread outward from the initial site of injury. Propagation was associated with higher baseline strain (propagation vs. no propagation [mean ± SD]: 1.52 ± 0.13 vs. 1.16 ± 0.20, P < 0.01) but similar oxygenation and lung weight. Propagation did not occur where baseline strain was less than 1.29. In healthy animals, large V(T) caused injury that was propagated inward from the lung periphery; in the absence of preexisting injury, propagation did not occur where strain was less than 2.0. CONCLUSIONS: Compared with healthy lungs, underlying injury causes propagation to occur at a lower strain threshold and it originates at the site of injury; this suggests that tissue around the primary lesion is more sensitive. Understanding how injury is propagated may ultimately facilitate a more individualized monitoring or management.