Overcoming the Interfacial Photocatalytic Degradation of Nonfullerene Acceptor-Based Organic Photovoltaics by Introducing a UV-A-Insensitive Titanium Suboxide Layer.

Although recent dramatic advances in power conversion efficiencies (PCEs) have resulted in values over 19%, the poor photostability of organic photovoltaics (OPVs) has been a serious bottleneck to their commercialization. The photocatalytic effect, which is caused by incident ultraviolet-A (UV-A, 320-400 nm) light in the most commonly used zinc oxide (ZnOX) electron transport layer (ETL), significantly deteriorates the photostability of OPVs. In this work, we develop a new and facile method to enhance the photostability of nonfullerene acceptor-based OPVs by introducing UV-A-insensitive titanium suboxide (TiOX) ETL. Through an in-depth analysis of mass information at the interface between the ETL and photoactive layer, we confirm that the UV-A-insensitive TiOX suppresses the photocatalytic effect. The resulting device employing the TiOX ETL shows excellent photostability, obtaining 80% of the initial PCE for up to 200 h under 1 sun illumination, which is 10 times longer than that of the conventional ZnOX system (19 h).

High-Throughput Quantitative Analysis of Amino Acids in Freeze-Dried Drops Using Time-of-Flight Secondary Ion Mass Spectrometry.

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has become a promising analytical tool for molecular profiling in biological applications. However, its ultrahigh vacuum environment and matrix effects hamper the absolute quantitation of solution samples. Herein, we present a rapid high-throughput platform for quantitative ToF-SIMS analysis of amino acids in matrix deposits formed from freeze-dried solution drops through ice sublimation on a parylene film microarray substrate. Droplets of the amino acid solutions, which were mixed with stable isotope-labeled phenylalanine (F*) of high concentration (10 mM), were loaded on wells of the microarray, then frozen and evaporated slowly below the freezing point, forming continuous solid-phase F* matrix deposits. The amino acids (≤500 µM), adequately well dispersed throughout the F* matrix deposits on each well, were quantitatively analyzed by ToF-SIMS in a rapid and high-throughput fashion. The lower limit of quantitation reached below 10 µM.

In Situ Doping of the PEDOT Top Electrode for All-Solution-Processed Semitransparent Organic Solar Cells.

The development of an ideal solution-processable transparent electrode has been a challenge in the field of all-solution-processed semitransparent organic solar cells (ST-OSCs). We present a novel poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) top electrode for all-solution-processed ST-OSCs through in situ doping of PEDOT:PSS. A strongly polarized long perfluoroalkyl (n = 8) chain-anchored sulfonic acid effectively eliminates insulating PSS and spontaneously crystallizes PEDOT at room temperature, leading to outstanding electrical properties and transparency of PEDOT top electrodes. Doped PEDOT-based ST-OSCs yield a high power conversion efficiency of 10.9% while providing an average visible transmittance of 26.0% in the visible range. Moreover, the strong infrared reflectivity of PEDOT enables ST-OSCs to reject 62.6% of the heat emitted by sunlight (76.7% from infrared radiation), outperforming the thermal insulation capability of commercial tint films. This light management approach using PEDOT enables ST-OSCs to simultaneously provide energy generation and energy savings, making it the first discovery toward sustainable energy in buildings.

Ultrahigh dielectric permittivity in oxide ceramics by hydrogenation.

Boosting dielectric permittivity representing electrical polarizability of dielectric materials has been considered a keystone for achieving scientific breakthroughs as well as technological advances in various multifunctional devices. Here, we demonstrate sizable enhancements of low-frequency dielectric responses in oxygen-deficient oxide ceramics through specific treatments under humid environments. Ultrahigh dielectric permittivity (~5.2 × 106 at 1 Hz) is achieved by hydrogenation, when Ni-substituted BaTiO3 ceramics are exposed to high humidity. Intriguingly, thermal annealing can restore the dielectric on-state (exhibiting huge polarizability in the treated ceramics) to the initial dielectric off-state (displaying low polarizability of ~103 in the pristine ceramics after sintering). The conversion between these two dielectric states via the ambient environment-mediated treatments and the successive application of external stimuli allows us to realize reversible control of dielectric relaxation characteristics in oxide ceramics. Conceptually, our findings are of practical interest for applications to highly efficient dielectric-based humidity sensors.

Efficient Photon Extraction in Top-Emission Organic Light-Emitting Devices Based on Ampicillin Microstructures.

The desire to enhance the efficiency of organic light-emitting devices (OLEDs) has driven to the investigation of advanced materials with fascinating properties. In this work, the efficiency of top-emission OLEDs (TEOLEDs) is enhanced by introducing ampicillin microstructures (Amp-MSs) with dual phases (α-/ß-phase) that induce photoluminescence (PL) and electroluminescence (EL). Moreover, Amp-MSs can adjust the charge balance by Fermi level (EF ) alignment, thereby decreasing the leakage current. The decrease in the wave-guided modes can enhance the light outcoupling through optical scattering. The resulting TEOLED demonstrates a record-high external quantum efficiency (EQE) (maximum: 68.7% and average: 63.4% at spectroradiometer; maximum: 44.8% and average: 42.6% at integrating sphere) with a wider color gamut (118%) owing to the redshift of the spectrum by J-aggregation. Deconvolution of the EL intensities is performed to clarify the contribution of Amp-MSs to the device EQE enhancement (optical scattering by Amp-MSs: 17.0%, PL by radiative energy transfer: 9.1%, and EL by J-aggregated excitons: 4.6%). The proposed TEOLED outperforms the existing frameworks in terms of device efficiency.

Healing Ion-Implanted Semiconductors by Hybrid Microwave Annealing: Activation of Nitrogen-Implanted TiO2.

In order to recover the damaged structure of a nitrogen-implanted TiO2 (N-I-TiO2) photoanode, hybrid microwave annealing (HMA) is proposed as an alternative postannealing process instead of conventional thermal annealing (CTA). Compared to CTA, HMA provides distinctive advantages: (i) facile transformation of the interstitial N-N states into substitutional N-Ti states, (ii) better preservation of the ion-implanted nitrogen in TiO2, and (iii) effective alleviation of lattice strain and reconstruction of the broken bonds. As a result, the HMA-activated photoanode improves the photocurrent density by a factor of ∼3.2 from 0.29 to 0.93 mA cm-2 at 1.23 VRHE and the incident photon-to-current conversion efficiency (IPCE) from ∼2.9% to ∼10.5% at 430 nm relative to those of the as-prepared N-I-TiO2 photoanode in photoelectrochemical water oxidation, which are much better than those of the CTA-activated photoanode (0.58 mA cm-2 at 1.23 VRHE and IPCE of 5.7% at 430 nm), especially in the visible light region (≥420 nm).

Improved device efficiency and lifetime of perovskite light-emitting diodes by size-controlled polyvinylpyrrolidone-capped gold nanoparticles with dipole formation.

Herein, an unprecedented report is presented on the incorporation of size-dependent gold nanoparticles (AuNPs) with polyvinylpyrrolidone (PVP) capping into a conventional hole transport layer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The hole transport layer blocks ion-diffusion/migration in methylammonium-lead-bromide (MAPbBr3)-based perovskite light-emitting diodes (PeLEDs) as a modified interlayer. The PVP-capped 90 nm AuNP device exhibited a seven-fold increase in efficiency (1.5%) as compared to the device without AuNPs (0.22%), where the device lifetime was also improved by 17-fold. This advancement is ascribed to the far-field scattering of AuNPs, modified work function and carrier trapping/detrapping. The improvement in device lifetime is attributed to PVP-capping of AuNPs which prevents indium diffusion into the perovskite layer and surface ion migration into PEDOT:PSS through the formation of induced electric dipole. The results also indicate that using large AuNPs (> 90 nm) reduces exciton recombination because of the trapping of excess charge carriers due to the large surface area.

Unusual enantiomeric separation due to residual amines in chiral crown ether stationary phase linked by long alkyl chain.

A new chiral stationary phase (CSP) in which (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was linked to a silica gel surface through a long alkyl chain and which did not contain additional aminoundecyl groups was prepared. Generally, when enantiomers containing a primary amine group are optically resolved using a crown-ether-type CSP, a higher resolution is achieved if the surface of the CSP does not contain any residual amine. In this study, the chiral separation factor and resolution factor of a CSP with a long alkyl chain such as the aminoundecyl group were unusually low in the absence of the residual aminoundecyl groups. In this study, a chiral column was prepared by introducing a chiral selector having a long alkyl chain on the surface of silica gel to separate enantiomers of α-amino acids. Furthermore, it was confirmed that the residual-amine-containing CSP, which was easier to synthesize, facilitated more effective enantiomeric separation than the CSP without residual amines.

Leaching behaviors and mechanisms of vitrified forms for the low-level radioactive solid wastes.

Leaching behaviors and mechanisms of commercialized glass wasteforms to sequester low-level solid-wastes were investigated: SG glass for resin waste and DG-2 glass for dry active waste. After ANS 16.1 leaching test, leachabilities of the nuclides, Co, Cs, and Sr, were all lager than 14, which met the requirement of the US-Nuclear Regulatory Commission. Holes of diameters 5-10 µm remained on the surface of the SG and crevices of lengths 10-50 µm were observed on the surface of the DG-2. We analyzed elemental compositions of the SG and the DG-2 with depths. For the SG, Si, Al, Ca, and Mg were accumulated and Na was depleted up to nearly 1.5 µm compared to an internal glass. For the DG-2, concentrations of B, Na, Al, Ca and Sr started to decrease from 2.5 µm even though other minor elements are still remained their concentrations. We suggested leaching mechanisms: alkali elements including H would diffuse through the holes on the SG, while most of the elements including Si and Al would diffuse through the crevices on the DG-2.

TOF-SIMS Analysis Using Bi3 + as Primary Ions on Au Nanoparticles Supported by SiO2/Si: Providing Insight into Metal-Support Interactions.

Au nanoparticles with a mean diameter of 20 nm with a coverage of ∼20% of the surface were distributed on a Si wafer surface and studied both before and after being annealed (at 100 and 300 °C). The two types of samples were analyzed using secondary ion mass spectroscopy (SIMS) with Bi3 + clusters as the primary ions combined with surface etching using Ar1000 + clusters. We observed a substantial difference in the SIMS spectra combined with a relatively short sputtering time of Ar1000 +. In the nonannealed samples, bare Au cluster cations and Si+ were observed in the SIMS spectra; AuSi+ clusters were also observed in the annealed samples. These results indicate Au-silicide formation at a part of the periphery of the Au nanoparticles upon annealing. We suggest that SIMS experiments using cluster ions such as Bi3 + can not only be used for surface elemental analyses but also provide information on local chemical environments of elements on the surface. This is an important issue in heterogeneous catalysis (e.g., strong metal-support interactions). We also advise that one should be careful interpreting the SIMS data combined with a longer Ar1000 + sputtering time because this can deteriorate the surfaces from their original structures.

Synthesis and application of amine-containing conjugated small molecules for the automatic formation of an electron transporting layer via spontaneous phase separation from the bulk-heterojunction layer.

Carbazole-based conjugated small molecule electrolytes (CSEs) containing different numbers of amine groups were synthesized and applied to bulk-heterojunction (BHJ) organic solar cells for the formation of a spontaneous self-assembled electron transporting layer (ETL). The active layer was spin-coated with a mixture solution containing the BHJ materials and a small amount of CSE, and a thin layer of CSE was formed underneath the active layer (CSE/BHJ bi-layer) via spontaneous phase separation, which is confirmed by the depth profile of the time of flight secondary ion mass spectroscopy (ToF-SIMS) spectrum. The amino groups in the CSEs form hydrogen-bonds with the surface of indium tin oxide (ITO), which acts as an ETL in BHJ solar cells. Moreover, the formed CSE layer is capable of changing the effective work function (WF) of ITO. An increasing number of amino groups in the CSEs (from Cz1N to Cz3N) provides more reduction of the effective WF of ITO, which results in a lower internal resistance and a higher power conversion efficiency (PCE). Furthermore, the enhanced hydrogen bonding between the amines and ITO with an increased number of amine groups has been studied by XPS. This result suggests that one-step processing provides a reduction of the manufacturing cost, which can provide an attractive design concept for ETL fabrication.

Liquid chromatographic resolution of proline and pipecolic acid derivatives on chiral stationary phases based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid.

Two liquid chromatographic chiral stationary phases based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid were applied to the resolution of the amide derivatives of cyclic α-amino acids including proline and pipecolic acid. Among the five amide derivatives of proline, aniline amide was resolved best on the first chiral stationary phase, which contains two N-H tethering amide groups, with the separation factor of 1.31 and the resolution of 2.60, and on the second chiral stationary phase, which contains two N-CH3 tethering amide groups, with the separation factor of 1.57 and the resolution of 5.50. Among the five amide derivatives of pipecolic acid, 2-naphthyl amide was resolved best on the first chiral stationary phase with the separation factor of 1.30 and the resolution of 1.75, but 1-naphthylmethyl amide was resolved best on the second chiral stationary phase with the separation factor of 1.30 and the resolution of 2.26. In general, the second chiral stationary phase was found to be better than the first chiral stationary phase in the resolution of the amide derivatives of cyclic α-amino acids. In this study, the second chiral stationary phase was first demonstrated to be useful for the resolution of secondary amino compounds.

Metabolic Response of Strawberry (Fragaria x ananassa) Leaves Exposed to the Angular Leaf Spot Bacterium (Xanthomonas fragariae).

Plants have evolved various defense mechanisms against biotic stress. The most common mechanism involves the production of metabolites that act as defense compounds. Bacterial angular leaf spot disease (Xanthomonas fragariae) of the strawberry (Fragaria x ananassa) has become increasingly destructive to strawberry leaves and plant production. In this study, we examined metabolic changes associated with the establishment of long-term bacterial disease stress using UPLC-QTOF mass spectrometry. Infected leaves showed decreased levels of gallic acid derivatives and ellagitannins, which are related to the plant defense system. The levels of phenylalanine, tryptophan, and salicylic acid as precursors of aromatic secondary metabolites were increased in inoculated leaves, whereas levels of coumaric acid, quinic acid, and flavonoids were decreased in infected plants, which are involved in the phenylpropanoid pathway. In addition, phenylalanine ammonia-lyase (PAL) activity, a key enzyme in the phenylpropanoid pathway, was decreased following infection. These results suggest that long-term bacterial disease stress may lead to down-regulation of select molecules of the phenylpropanoid metabolic pathway in strawberry leaves. This approach could be applied to explore the metabolic pathway associated with plant protection/breeding in strawberry leaves.

Polyphenolic profile and antioxidant effects of various parts of Artemisia annua L.

An annual Korean weed, Artemisia annua L., has been used as a folk medicine for the treatment of a number of diseases. Remarkably, among the 32 polyphenols characterized in various parts of plant tissue, including flowers, leafs, stems and roots, 10 compounds were detected for the first time using liquid chromatography-tandem mass spectrometry (LC/MS/MS). The quantification method was validated using structurally related external standards with determination coefficients (R(2) ) ≥0.9995. The limits of detection and quantitation were 0.068-3.932 and 0.226-13.108 mg/L, respectively. The recoveries estimated at 50 and 100 mg/L ranged between 60.6-92.2 and 61.3-111%, respectively, with relative standard deviations <12%. The roots contained the largest concentration of identified components, while the flowers contained the least. The antioxidant capacity evaluated in terms of 1,1-diphenyl-2-picrylhydrazyl and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation-scavenging activities and reducing power was highest in the roots and lowest in the flowers. The findings are well correlated and suggest that the antioxidant capacities principally depend upon the polyphenol concentrations in each part of the plant.

The polyphenolic profiles and antioxidant effects of Agastache rugosa Kuntze (Banga) flower, leaf, stem and root.

Agastache rugosa Kuntze (Korean mint) is used as a spice and in folk medicine in East Asia. The present study identified a total of 18 polyphenols from the flower, leaf, stem and roots of this plant using high-performance liquid chromatography-tandem mass spectrometry. Fourteen of these compounds had not previously been identified in these plant tissues. Each polyphenol was validated in comparison with external calibration curves constructed using structurally related compounds, with determination coefficients >0.9993. The limits of detection and quantification were 0.092-0.650 and 0.307-2.167 mg/L, respectively. Recoveries of 61.92-116.44% were observed at two spiking levels, with 0.91-11% precision, expressed as relative standard deviation (except anthraquinone spiked at 10 mg/L). Hydroxycinnamic acid was the most abundant compound in the root, while the flowers showed the highest total flavonoid level. Antioxidant activities, determined in terms of reducing power, Fe(2+) chelating activity and the radical scavenging activities using α,α-diphenyl-ß-picrylhydrazyl and 2-2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid, increased in a concentration-dependent manner; the highest activity was identified in the stems, followed by leaves > flowers > roots. These findings indicate that A. rugosa is a good source of bioactive compounds and can be used as a functional food.

Adhesion of Poly(phenylene sulfide) Resin with Polymeric Film of Triazine Thiol on Aluminum Surface Modified by Anodic Oxidation.

Various surface modifications have been applied to improve the adhesion properties of aluminum for the cap plate and sealing quality of electrolyte on Li ion batteries. In this study, we have tried to find the effective condition for the polymerization of triazine thiols (TT) on modified aluminum surfaces by anodic aluminum oxide. Characterization of polymerized films on aluminum was explored by scanning electron microscopy, X-ray photoelectron spectroscopy, and secondary ion mass spectroscopy analysis. Scanning electron microscopy results reveal that meaningful roughness was formed on aluminum surfaces by anodic oxidation. Secondary ion mass spectroscopy analysis results represent that the peel strength was found to depend on film thickness and the composition of the adhesion layer. As a result, Al/PPS (polyphenylene sulfide) resin assemblies developed in this study have superior adhesive property. Therefore, these assemblies might be a viable candidate for a sealing technique for Li ion batteries.

The effects of different night-time temperatures and cultivation durations on the polyphenolic contents of lettuce: Application of principal component analysis.

The present study was conducted to characterize the polyphenolic contents of lettuce leaves grown under different night-time temperatures (4, 12, and 20 °C) and cultivation durations (5, 15, and 20 days) using high performance liquid chromatography-tandem mass spectrometry (LC/MS/MS). The assay method was validated based on specificity, linearity, accuracy, precision, and the performance limit. The total polyphenolic contents were highest (2462.6 mg/kg) after transplantation at a night temperature of 20 °C on day 20 and lowest (1132.7 mg/kg) at the same temperature on day 5. Quantification and principal component analysis showed that the relative contents of quercetin and kaempferol were markedly higher during the early stage of cultivation (day 5) than those of day 15 and 20, and that night-time temperatures of 12 and 20 °C on day 20 were favorable for producing polyphenol-rich lettuce containing caffeic acid. In conclusion, a synergistic effect between high night-time temperatures (12 and 20 °C) and cultivation duration (20 days) produced lettuce rich in polyphenols compared to that at low temperature (4 °C).

Dietary-flavonoid-rich flowers of Rumex nervosus Vahl: Liquid chromatography with electrospray ionization tandem mass spectrometry profiling and in vitro anti-inflammatory effects.

Rumex nervosus is a plant species found widely in Eastern Africa and the Arabian Peninsula. In addition to its uses in traditional medicinal, the plant shows various biological activities, such as antiviral, antibacterial, and antioxidant activity. In this study, nine flavonols, six flavones, three flavanones, and one flavanol were characterized from the flowers of R. nervosus using liquid chromatography with electrospray ionization tandem mass spectrometry and literature data. Validation data indicated that the determination coefficients (R(2) ) were ≥ 0.9914. The limits of detection and quantification were in the ranges of 0.15-1.24 and 0.50-4.13 mg/L, respectively. Recoveries at 10 and 50 mg/L were 71.1-110.2 and 65.4-115.1%, with relative standard deviations of 7.4-40.1 and 2.1-13.0%, respectively. Quercetin 3-O-rhamnoside (10) was the dominant component, contributing 30.8% of total flavonoids (1003.0 ± 26.2 mg/kg fresh flower sample), whereas luteolin 6-C-glucoside (3) was the lowest yielding compound (0.1%). The 19 flavonoids identified were characterized for the first time. In vitro anti-inflammatory studies showed that this mixture can suppress the production of inflammatory mediators, including inducible nitric oxide synthase, cyclooxygenase-2, kappa B inhibitor, and interleukin-1ß, by down-regulating the nuclear factor-kappa B and mitogen-activated protein kinases pathways. The results of this study may provide information for processing R. nervosus as a potential source of functional food.