Theoretical analysis of naproxen reaction with sulfate and hydroxyl radicals in the aqueous phase: Investigating reactive sites and reaction kinetics.

In this study, we have utilized theoretical calculations to predict the reaction active sites of naproxen when reacting with radicals and to further study the thermodynamics and kinetics of the reactions with ·OH and SO4-·. The evidence, derived from the average local ionization energy and electrostatic potential, points to the naphthalene ring as the preferred site of attack, especially for the C2, C6, C9, and C10 sites. The changes in Gibbs free energy and enthalpy of the reactions initiated by ·OH and SO4-· ranged between -19.6 kcal/mol - 26.3 kcal/mol and -22.3 kcal/mol -18.5 kcal/mol, respectively. More in-depth investigation revealed that RA2 pathway for ·OH exhibited the lowest free energy of activation, suggesting this reaction is more inclined to proceed. The second-order rate constant results indicate the ·OH attacking reaction is faster than reactions initiated by SO4·-, yet controlled by diffusion. The consistency between theoretical findings and experimental data underscores the validity of this computational method for our study.

Pirfenidone Alleviates Inflammation and Fibrosis of Acute Respiratory Distress Syndrome by Modulating the Transforming Growth Factor-ß/Smad Signaling Pathway.

Acute respiratory distress syndrome (ARDS) occurs as an acute onset condition, and patients present with diffuse alveolar damage, refractory hypoxemia, and non-cardiac pulmonary edema. ARDS progresses through an initial exudative phase, an inflammatory phase, and a final fibrotic phase. Pirfenidone, a powerful anti-fibrotic agent, is known as an agent that inhibits the progression of fibrosis in idiopathic pulmonary fibrosis. In this study, we studied the treatment efficiency of pirfenidone on lipopolysaccharide (LPS) and bleomycin-induced ARDS using rats. The ARDS rat model was created by the intratracheal administration of 3 mg/kg LPS of and 3 mg/kg of bleomycin dissolved in 0.2 mL of normal saline. The pirfenidone treatment group was administered 100 or 200 mg/kg of pirfenidone dissolved in 0.5 mL distilled water orally 10 times every 2 days for 20 days. The administration of LPS and bleomycin intratracheally increased lung injury scores and significantly produced pro-inflammatory cytokines. ARDS induction increased the expressions of transforming growth factor (TGF)-ß1/Smad-2 signaling factors. Additionally, matrix metalloproteinase (MMP)-9/tissue inhibitor of metalloproteinase (TIMP)-1 imbalance occurred, resulting in enhanced fibrosis-related factors. Treatment with pirfenidone strongly suppressed the expressions of TGF-ß1/Smad-2 signaling factors and improved the imbalance of MMP-9/TIMP-1 compared to the untreated group. These effects led to a decrease in fibrosis factors and pro-inflammatory cytokines, promoting the recovery of damaged lung tissue. These results of this study showed that pirfenidone administration suppressed inflammation and fibrosis in the ARDS animal model. Therefore, pirfenidone can be considered a new early treatment for ARDS.

ASA VI controls osteoarthritis in mice by maintaining mitochondrial homeostasis through Sirtuin 3.

OBJECTIVE: The aim of this study was to investigate whether ASA VI controls osteoarthritis (OA) by regulating mitochondrial function. METHODS: Primary chondrocytes were isolated and cultured from rat knee joints. The chondrocytes were treated with ASA VI and interleukin-1ß (IL-1ß) to simulate the inflammatory environment of OA. Cell viability, apoptosis, inflammatory cytokine levels, and extracellular matrix (ECM) component levels were assessed. Mitochondrial function, including ATP levels, mitochondrial membrane potential, reactive oxygen species (ROS) levels, and mitochondrial DNA content, was evaluated. The expression of Sirtuin 3 (Sirt3), a key regulator of mitochondrial homeostasis, was examined. Additionally, a rat OA model was established by destabilizing the medial meniscus, and the effects of ASA VI on cartilage degeneration were assessed. RESULTS: ASA VI treatment improved cell viability, reduced apoptosis, and decreased IL-6 and TNF-α levels in IL-1ß-induced chondrocytes. ASA VI also upregulated Collagen II and Aggrecan expression, while downregulating ADAMTS5 and MMP-13 expression. Furthermore, ASA VI mitigated IL-1ß-induced mitochondrial dysfunction by increasing ATP levels, restoring mitochondrial membrane potential, reducing ROS production, and preserving mitochondrial DNA content. These effects were accompanied by the activation of Sirt3. In the rat OA model, ASA VI treatment increased Sirt3 expression and alleviated cartilage degeneration. CONCLUSION: ASA VI exerts chondroprotective and anti-inflammatory effects on IL-1ß-induced chondrocytes by improving mitochondrial function through Sirt3 activation. ASA VI also attenuates cartilage degeneration in a rat OA model. These findings suggest that ASA VI may be a potential therapeutic agent for the treatment of osteoarthritis by targeting mitochondrial dysfunction.

Prolonged vs shorter awake prone positioning for COVID-19 patients with acute respiratory failure: a multicenter, randomised controlled trial.

PURPOSE: Awake prone positioning has been reported to reduce endotracheal intubation in patients with coronavirus disease 2019 (COVID-19)-related acute hypoxemic respiratory failure (AHRF). However, it is still unclear whether using the awake prone positioning for longer periods can further improve outcomes. METHODS: In this randomized, open-label clinical trial conducted at 12 hospitals in China, non-intubated patients with COVID-19-related AHRF were randomly assigned to prolonged awake prone positioning (target > 12 h daily for 7 days) or standard care with a shorter period of awake prone positioning. The primary outcome was endotracheal intubation within 28 days after randomization. The key secondary outcomes included mortality and adverse events. RESULTS: In total, 409 patients were enrolled and randomly assigned to prolonged awake prone positioning (n = 205) or standard care (n = 204). In the first 7 days after randomization, the median duration of prone positioning was 12 h/d (interquartile range [IQR] 12-14 h/d) in the prolonged awake prone positioning group vs. 5 h/d (IQR 2-8 h/d) in the standard care group. In the intention-to-treat analysis, intubation occurred in 35 (17%) patients assigned to prolonged awake prone positioning and in 56 (27%) patients assigned to standard care (relative risk 0.62 [95% confidence interval (CI) 0.42-0.9]). The hazard ratio (HR) for intubation was 0.56 (0.37-0.86), and for mortality was 0.63 (0.42-0.96) for prolonged awake prone positioning versus standard care, within 28 days. The incidence of pre-specified adverse events was low and similar in both groups. CONCLUSION: Prolonged awake prone positioning of patients with COVID-19-related AHRF reduces the intubation rate without significant harm. These results support prolonged awake prone positioning of patients with COVID-19-related AHRF.

Double-network polyphenol chitosan hydrogels with instant aldehyde-ß-cyclodextrin-based structure as potential for treating bacterially infected wounds.

Treatment of multiple bacterial infected wounds by eliminating bacteria and promoting tissue regeneration remains a clinical challenge. Herein, dual-network hydrogels (CS-GA/A-ß-CD) with snap-structure were designed to achieve curcumin immobilization, using gallic acid-grafted chitosan (CS-GA) and aldehyde-ß-cyclodextrin (A-ß-CD) crosslinked. A-ß-CD were able to achieve rapid dissolution (≥222.35 mg/mL H2O), and helped CS-GA/A-ß-CD achieve rapid gelation (≤66.23 s). By adjusting the ratio of aldehyde groups of A-ß-CD, mechanical properties and drug release can be controlled. CS-GA/A-ß-CD/Cur exhibited excellent antimicrobial properties against S. aureus, E. coli, and P. aeruginosa. In vivo experiments demonstrated that CS-GA/A-ß-CD/Cur achieved acute bacterial infection wound healing after 20th days, proving its great potential for wound dressing.

Integrating commercial graphite with network-like carbon fibers for high-rate and long-term cycling K+-storage.

K can reversibly intercalate into graphite by forming KC8 (279 mA h g-1, ≈0.2 V) in conventional carbonate electrolytes, but the large ionic radius of K+ (1.38 Å) easily results in structural degradation and rapid capacity decay. Here, commercial graphite particles are directly electrospun into network-like carbon fibers, thus forming a flexible Gr@CNF membrane. This hybrid electrode configuration can efficiently withstand the volume expansion during K+ insertion. K||Gr@CNF half-cells can stably operate for over 800 cycles (running time of 170 days at C/3) and achieve fast K+-intercalation kinetics at 5C. The fabricated Gr@CNF||AC K-ion hybrid capacitor delivers a high energy density of 119.3 W h kg-1 at 2717.82 W kg-1, corresponding to a fast-charge time of 3.2 min.

Construction of hierarchical In2O3/In2S3-ZnCdS ternary microsphere heterostructures for efficient photocatalytic nitrogen fixation.

Photocatalytic ammonia production holds immense promise as an environmentally sustainable approach to nitrogen fixation. In this study, In2O3/In2S3-ZnCdS ternary heterostructures were successfully constructed through an innovative in situ anion exchange process, coupled with a low-temperature hydrothermal method for ZnCdS (ZCS) incorporation. The resulting In2O3/In2S3-ZCS photocatalyst was proved to be highly efficient in converting N2 to NH3 under mild conditions, eliminating the need for sacrificial agents or precious metal catalysts. Notably, the NH4+ yield of In2O3/In2S3-0.5ZCS reached a significant level of 71.2 µmol g-1 h-1, which was 10.47 times higher than that of In2O3 (6.8 µmol g-1 h-1) and 3.22 times higher than that of In2O3/In2S3 (22.1 µmol g-1 h-1). This outstanding performance can be attributed to the ternary heterojunction configuration, which significantly extends the lifetime of photogenerated carriers and enhances the spatial separation of electrons and holes. The synergistic interplay between CdZnS, In2S3, and In2O3 in the heterojunction facilitates electron transport, thereby boosting the rate of the photocatalytic nitrogen fixation reaction. Our study not only validates the efficacy of ternary heterojunctions in photocatalytic nitrogen fixation but also offers valuable insights for the design and construction of such catalysts for future applications.

A Dual-Carbon Potassium-Ion Capacitor Enabled by Hollow Carbon Fibrous Electrodes with Reduced Graphitization.

The large size of K+ ions (1.38 Å) sets a challenge in achieving high kinetics and long lifespan of potassium storage devices. Here, a fibrous ZrO2 membrane is utilized as a reactive template to construct a dual-carbon K-ion capacitor. Unlike graphite, ZrO2-catalyzed graphitic carbon presents a relatively disordered layer arrangement with an expanded interlayer spacing of 0.378 nm to accommodate K+ insertion/extraction. Pyridine-derived nitrogen sites can locally store K-ions without disrupting the formation of stage-1 graphite intercalation compounds (GICs). Consequently, N-doped hollow graphitic carbon fiber achieves a K+-storage capacity (primarily below 1 V), which is 1.5 time that of commercial graphite. Potassium-ion hybrid capacitors are assembled using the hollow carbon fiber electrodes and the ZrO2 nanofiber membrane as the separator. The capacitor exhibits a high power of 40 000 W kg-1, full charge in 8.5 s, 93% capacity retention after 5000 cycles at 2 A g-1, and a low self-discharge rate of 8.6 mV h-1. The scalability and high performance of the lattice-expanded tubular carbon electrodes underscores may advance the practical potassium-ion capacitors.

Accuracy and transportability of machine learning models for adolescent suicide prediction with longitudinal clinical records.

Machine Learning models trained from real-world data have demonstrated promise in predicting suicide attempts in adolescents. However, their transportability, namely the performance of a model trained on one dataset and applied to different data, is largely unknown, hindering the clinical adoption of these models. Here we developed different machine learning-based suicide prediction models based on real-world data collected in different contexts (inpatient, outpatient, and all encounters) with varying purposes (administrative claims and electronic health records), and compared their cross-data performance. The three datasets used were the All-Payer Claims Database in Connecticut, the Hospital Inpatient Discharge Database in Connecticut, and the Electronic Health Records data provided by the Kansas Health Information Network. We included 285,320 patients among whom we identified 3389 (1.2%) suicide attempters and 66% of the suicide attempters were female. Different machine learning models were evaluated on source datasets where models were trained and then applied to target datasets. More complex models, particularly deep long short-term memory neural network models, did not outperform simpler regularized logistic regression models in terms of both local and transported performance. Transported models exhibited varying performance, showing drops or even improvements compared to their source performance. While they can achieve satisfactory transported performance, they are usually upper-bounded by the best performance of locally developed models, and they can identify additional new cases in target data. Our study uncovers complex transportability patterns and could facilitate the development of suicide prediction models with better performance and generalizability.

Metal alkoxides: A new type of reversible anode materials for stable and high-rate lithium-ion batteries.

Metal-organic compounds have attracted significant attention for lithium-ion battery (LIB) anodes. However, their practical application is severely hindered by the poor structural stability and sluggish Li+ reaction kinetics. Herein, we proposed a new type of metal-organic compound, metal alkoxides, for high-performance LIBs. A series of metal-alkoxide/graphene composites with different transition metal centers and alkoxide anions are prepared to investigate the structural stability, Li-storage ability, and Li+ diffusion kinetics. The results reveal that the metal centers and alkoxide anions have significant influence on the structural stability, molar mass, and electronic structures, which are highly related to the Li-storage performance. Among them, Co-EG/rGO (EG represents the ethylene glycol anion) delivers the best performance involving high specific capacity (975 mAh g-1 at 0.2 A g-1), excellent rate capability (400.8 mAh g-1 at 10 A g-1), and stable cycling performance (86.8 % capacity retention after 600 cycles) due to its stable structure, smaller molar mass, and favorable electronic structure. Moreover, the Li-storage mechanism and solid electrolyte interphase (SEI) evolution of the Co-EG/rGO electrode are studied in detail through multiple ex-situ/in-situ characterizations. This work provides a new type of metal alkoxide anode material for high-rate and long-life LIBs toward practical energy applications.

Impact of dietary n-6/n-3 fatty acid ratio of atherosclerosis risk: A review.

Atherosclerosis is a causative factor associated with cardiovascular disease (CVD). Over the past few decades, extensive research has been carried out on the relationship between the n-6/n-3 fatty acid ratio of ingested lipids and the progression of atherosclerosis. However, there are still many uncertainties regarding the precise nature of this relationship, which has led to challenges in providing sound dietary advice to the general public. There is therefore a pressing need to review our current understanding of the relationship between the dietary n-6/n-3 fatty acid ratio and atherosclerosis, and to summarize the underlying factors contributing to the current uncertainties. Initially, this article reviews the association between the n-6/n-3 fatty acid ratio and CVDs in different countries. A summary of the current understanding of the molecular mechanisms of n-6/n-3 fatty acid ratio on atherosclerosis is then given, including inflammatory responses, lipid metabolism, low-density lipoprotein cholesterol oxidation, and vascular function. Possible reasons behind the current controversies on the relationship between the n-6/n-3 fatty acid ratio and atherosclerosis are then provided, including the precise molecular structures of the fatty acids, diet-gene interactions, the role of fat-soluble phytochemicals, and the impact of other nutritional factors. An important objective of this article is to highlight areas where further research is needed to clarify the role of n-6/n-3 fatty acid ratio on atherosclerosis.

Lipid-coated gold nanorods for photoimmunotherapy of primary breast cancer and the prevention of metastasis.

Nanomedicines hold promise for the treatment of various diseases. However, treating cancer metastasis remains highly challenging. In this study, we synthesized gold nanorods (AuNRs) containing (α-GC), an immune stimulator, for the treatment of primary cancer, metastasis, and recurrence of the cancer. Therefore, the AuNR were coated with lipid bilayers loaded with α-GC (α-LA). Upon irradiation with 808 nm light, α-LA showed a temperature increase. Intra-tumoral injection of α-LA in mice and local irradiation of the 4T1 breast cancer tumor effectively eliminated tumor growth. We found that the presence of α-GC in α-LA activated dendritic cells and T cells in the spleen, which completely blocked the development of lung metastasis. In mice injected with α-LA for primary breast cancer treatment, we observed antigen-specific T cell responses and increased cytotoxicity against 4T1 cells. We conclude that α-LA is promising for the treatment of both primary breast cancer and its metastasis.

Attapulgite-intercalated g-C3N4/ZnIn2S4 3D hierarchical Z-scheme heterojunction for boosting photocatalytic hydrogen production.

Construction of hierarchical architecture with suitable band alignment for graphitic carbon nitride (g-C3N4) played a pivotal role in enhancing the efficiency of photocatalysts. In this study, a novel attapulgite-intercalated g-C3N4/ZnIn2S4 nanocomposite material (ZIS/CN/ATP, abbreviated as ZCA) was successfully synthesized using the freeze-drying technique, thermal polymerization, and a simple low-temperature hydrothermal method. Attapulgite (ATP) was intercalated into g-C3N4 to effectively regulate its interlayer structure. The results reveal a substantial enlargement of its internal space, thereby facilitating the provision of additional active sites for improved dispersibility of ZnIn2S4. Notably, the optimized photocatalyst, comprising a mass ratio of ATP, g-C3N4, and ZnIn2S4 at 1:1:2.5 respectively, achieves an outstanding hydrogen evolution rate of 3906.15 µmol g-1h-1, without the need for a Pt co-catalyst. This rate surpasses that of pristine g-C3N4 by a factor of 475 and ZnIn2S4 by a factor of 5, representing a significant improvement in performance. This significant enhancement can be primarily attributed to the higher specific surface area, richer active sites, broadened light response range, and efficient interfacial charge transfer channels of the ZCA composite photocatalyst. Furthermore, the Z-scheme photocatalytic mechanism for the sandwich-like layered structure heterojunction was thoroughly investigated using diverse characterization techniques. This work offers new insights for enhancing photocatalytic performance through the expanded utilization of natural minerals, paving the way for future advancements in this field.

Realizing Efficient Activity and High Conductivity of Perovskite Symmetrical Electrode by Vanadium Doping for CO2 Electrolysis.

Solid oxide electrolysis cells (SOECs) show significant promise in converting CO2 to valuable fuels and chemicals, yet exploiting efficient electrode materials poses a great challenge. Perovskite oxides, known for their stability as SOEC electrodes, require improvements in electrocatalytic activity and conductivity. Herein, vanadium(V) cation is newly introduced into the B-site of Sr2Fe1.5Mo0.5O6-δ perovskite to promote its electrochemical performance. The substitution of variable valence V5+ for Mo6+ along with the creation of oxygen vacancies contribute to improved electronic conductivity and enhanced electrocatalytic activity for CO2 reduction. Notably, the Sr2Fe1.5Mo0.4V0.1O6-δ based symmetrical SOEC achieves a current density of 1.56 A cm-2 at 1.5 V and 800 °C, maintaining outstanding durability over 300 h. Theoretical analysis unveils that V-doping facilitates the formation of oxygen vacancies, resulting in high intrinsic electrocatalytic activity for CO2 reduction. These findings present a viable and facile strategy for advancing electrocatalysts in CO2 conversion technologies.

[Comparison on Environmental Benefits of Municipal Solid Waste Management in Suzhou Before and After Classification].

In order to systematically understand the urban environmental benefit improvement of municipal solid waste （MSW） classification, based on the disposal data of MSW before and after the MSW classification in Suzhou from 2017 to 2021, the environmental impact potential （EIP） of the MSW collection-transportation-disposal process was calculated, and the environmental benefits of the MSW integrated management in Suzhou to 2035 were predicted. After the MSW classification in Suzhou at the end of 2019, the EIP （in terms of PET2000, the same below） of the per unit weight of MSW was reduced by 18.38% from 2.34×10-13 t-1 in 2017 to 1.91×10-13 t-1 in 2021. The environmental benefits of the MSW integrated management could be improved by classification. Based on the Suzhou MSW removal and transportation situation in 2021, different classification and disposal scenarios were established to calculate. It was found that after the classification effect showed gradient improvement, and the disposal capacity matched accordingly, the environmental benefits of MSW were further improved. Under the planning disposal capacity scenario of "zero waste to landfill", the EIP and the total carbon emissions of per unit weight of MSW should be reduced by 23.96% and 30.73%, respectively, compared with the actual situation in 2021. Based on the linear model of population and economic development level of Suzhou, it is expected that the annual production of MSW in Suzhou will be increased to 6.965 million tons in 2035. Under the background of continuous improvement of MSW classification and continuous optimization of city appearance and environment in Suzhou, based on the status quo of terminal disposal capacity in Suzhou, the EIP of per unit weight of MSW after improving the efficiency of classification by 2035 was predicted to be 1.54×10-13 t-1, the total EIP would be 1.05×10-6, and the total carbon emissions would increase to 3.80 million tons. Under the ideal scenario of expanding the scale of waste disposal, "zero landfill" of raw MSW, and full resource utilization of food waste, the EIP of per unit weight of MSW in 2035 was predicted to be 1.28×10-13 t-1, and the total EIP and the total carbon emissions would be 8.69×10-7 and 3.23 million tons, respectively, which was approximately 5.65% and 1.23% less than the actual scenario in 2021, respectively. The EIP and carbon emissions of MSW integrated management could be controlled better by the coordinated promotion of classified collection and transportation and quality disposal.

The incidence, risk factors, and prognosis of acute kidney injury in patients after cardiac surgery.

Background: Acute kidney injury (AKI) represents a significant complication following cardiac surgery, associated with increased morbidity and mortality rates. Despite its clinical importance, there is a lack of universally applicable and reliable methods for the early identification and diagnosis of AKI. This study aimed to examine the incidence of AKI after cardiac surgery, identify associated risk factors, and evaluate the prognosis of patients with AKI. Method: This retrospective study included adult patients who underwent cardiac surgery at Changhai Hospital between January 7, 2021, and December 31, 2021. AKI was defined according to the Kidney Disease: Improving Global Outcomes (KDIGO) criteria. Perioperative data were retrospectively obtained from electronic health records. Logistic regression analyses were used to identify independent risk factors for AKI. The 30-day survival was assessed using the Kaplan-Meier method, and differences between survival curves for different AKI severity levels were compared using the log-rank test. Results: Postoperative AKI occurred in 257 patients (29.6%), categorized as stage 1 (179 patients, 20.6%), stage 2 (39 patients, 4.5%), and stage 3 (39 patients, 4.5%). The key independent risk factors for AKI included increased mean platelet volume (MPV) and the volume of intraoperative cryoprecipitate transfusions. The 30-day mortality rate was 3.2%. Kaplan-Meier analysis showed a lower survival rate in the AKI group (89.1%) compared to the non-AKI group (100%, P < 0.001). Conclusion: AKI was notably prevalent following cardiac surgery in this study, significantly impacting survival rates. Notably, MPV and administration of cryoprecipitate may have new considerable predictive significance. Proactive identification and management of high-risk individuals are essential for reducing postoperative complications and mortality.

Green light all the way: Triple modification synergistic modification effect to enhance the photoelectrochemical water oxidation performance of BiVO4 photoanode.

The recombination of photogenerated electron-hole pairs of the photoanode seriously impairs the application of bismuth vanadate (BiVO4) in photoelectrochemical water splitting. To address this issue, we prepared a Yb:BiVO4/Co3O4/FeOOH composite photoanode by employing drop-casting and soaking methods to attach Co3O4/FeOOH cocatalysts to the surface of ytterbium-doped BiVO4. The prepared Yb:BiVO4/Co3O4/FeOOH photoanode demonstrates a high photocurrent density of 4.89 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (RHE), which is 5.1 times that of bare BiVO4 (0.95 mA cm-2). Detailed characterization and testing demonstrated that Yb doping narrows the band gap and significantly enhances the carrier density. Furthermore, Co3O4 serves as a hole transfer layer to expedite hole migration and diminish recombination, while FeOOH offers additional active sites and minimizes surface trap states, thus boosting stability. The synergistic effects of Yb doping and Co3O4/FeOOH cocatalyst significantly improved the reaction kinetics and overall performance of PEC water oxidation. This work provides a strategy for designing efficient photoanodes for PEC water oxidation.

The role of NCAPH in cancer treatment.

Many solid tumors frequently overexpress Non-SMC Condensin I Complex Subunit H (NCAPH), and new studies suggest that NCAPH may be a target gene for clinical cancer therapy. Numerous investigations have shown that a variety of transcription factors, including as MYBL2, FOXP3, GATA3, and OTC1, can stimulate the transcription of NCAPH. Additionally, NCAPH stimulates many oncogenic signaling pathways, such as ß-Catenin/PD-L1, PI3K/AKT/SGK3, MEK/ERK, AURKB/AKT/mTOR, PI3K/PDK1/AKT, and Chk1/Chk2. Tumor immune microenvironment modification and tumor growth, apoptosis, metastasis, stemness, and treatment resistance all depend on these signals. NCAPH has the ability to form complexes with other proteins that are involved in glycolysis, DNA damage repair, and chromatin remodeling. This review indicates that NCAPH expression in most malignant tumors is associated with poor prognosis and low recurrence-free survival.

Candidatus Liberibacter asiaticus influences the emergence of the Asian citrus psyllid Diaphorina citri by regulating key cuticular proteins.

The Asian citrus psyllid, Diaphorina citri, is the primary vector of the HLB pathogen, Candidatus Liberibacter asiaticus (CLas). The acquisition of CLas shortens the developmental period of nymphs, accelerating the emergence into adulthood and thereby facilitating the spread of CLas. Cuticular proteins (CPs) are involved in insect emergence. In this study, we investigated the molecular mechanisms underlying CLas-promoted emergence in D. citri via CP mediation. Here, a total of 159 CP genes were first identified in the D. citri genome. Chromosomal location analysis revealed an uneven distribution of these CP genes across the 13 D. citri chromosomes. Proteomic analysis identified 54 differentially expressed CPs during D. citri emergence, with 14 CPs exhibiting significant differential expression after CLas acquisition. Five key genes, Dc18aa-1, Dc18aa-2, DcCPR-24, DcCPR-38 and DcCPR-58, were screened from the proteome and CLas acquisition. The silencing of these 5 genes through a modified feeding method significantly reduced the emergence rate and caused various abnormal phenotypes, indicating the crucial role that these genes play in D. citri emergence. This study provides a comprehensive overview of the role of CPs in D. citri and reveals that CLas can influence the emergence process of D. citri by regulating the expression of CPs. These key CPs may serve as potential targets for future research on controlling huanglongbing (HLB) transmission.

Mode of inheritance for pesticide resistance, importance and prevalence: A review.

Pesticides remain a cornerstone in pest control, yet their extensive and irrational use also fuel the evolution of resistance. This review analyzes globally published experimental data spanning from the 1970s to 2023 to focus on how phenotypic and underlying genotypic variations are shaped during the selective response. The discussion commences with an examination of sex-linked/maternal resistance. Observations related to maternal inheritance have enriched our understanding of pesticide mode of action, notably exemplified by bifenazate. However, the predominant control of the resistant phenotype is attributed to autosomal traits, with a high prevalence of dominance and monogenic inheritance observed, also evident in field strains. This observation raises concerns regarding resistance management strategies due to their potential to accelerate the spread of resistance. The interplay between dominance levels and monogenic inheritance is further explored, with dominant traits being significantly more prevalent in polygenic inheritance. This observation may be attributed to the accumulation of enhanced metabolism. Notably, further analysis indicated that field strains exhibit a higher incidence of monogenic inheritance compared to other selected strains, aligning with established theoretical frameworks. In conclusion, the genetic architecture of resistance warrants increased research focus for its pivotal role in guiding resistance management strategies and advancing fundamental research.