Calcium-phosphorus interactions at a nano-structured silicate surface.

Nano-structured calcium silicate (NCS), a highly porous material synthesized by controlled precipitation from geothermal fluids or sodium silicate solution, was developed as filler for use in paper manufacture. NCS has been shown to chemisorb orthophosphate from an aqueous solution probably obeying a Freundlich isotherm with high selectivity compared to other common environmental anions. Microanalysis of the products of chemisorption indicated there was significant change from the porous and nano-structured morphology of pristine NCS to fibrous and crystalline morphologies and non-porous detritus. X-ray diffraction analysis of the crystalline products showed it to be brushite, CaHPO42H2O, while the largely X-ray amorphous component was a mixture of calcium phosphates. A two-step mechanism was proposed for the chemisorption of phosphate from an aqueous solution by NCS. The first step, which was highly dependent on pH, was thought to be desorption of hydroxide ions from the NCS surface. This was kinetically favoured at lower initial pH, where the predominant form of phosphate present was H2PO(-)4, and led to decreased phosphorus uptake with increasing pH. The second step was thought to be a continuing chemisorption process after stabilization of the pH-value. The formation of brushite as the primary chemisorption product was found to be consistent with the proposed mechanism.

In situ synthesis of polysulfides covalently bonded to silica.

Silanol groups, triple bond SiOH, on the surface of silica were esterified with unsaturated alcohols and long-chain alcohols bearing thiol groups. The modified silicas obtained were used as substrates for a vulcanization-analogous reaction with sulfur catalyzed by zinc dimethyldithiocarbamate. Surface-esterified thiols could be smoothly converted to bridged polysulfides bonded to the silica surface, whereas the use of surface-esterified unsaturated alcohols led to removal of the surface-esterified alcohol from the silica surface. The materials were characterized by solid-state NMR and thermal and microanalytical analysis. The linking of surface-esterified alkenols and thiols by sulfide bridges was investigated by a numerical model for a flat surface. This showed that for a typical density of 3-4 micromol/m(2) surface groups, a statistical maximum of 70-75% of groups could be linked by S(n) bridges (n=2-4).