Photoactivated Cyclic Polyphthalaldehyde Microcapsules for Payload Delivery.

Microcapsules with a cyclic polyphthalaldehyde (cPPA) shell and oil core were fabricated by an emulsification process. The low ceiling temperature cPPA shell was made phototriggerable by incorporating a photoacid generator (PAG). Photoactivation of the PAG created a strong acid which catalyzed cPPA depolymerization, resulting in the release of the core payload, as quantified by 1H NMR. The high molecular weight cPPA (197 kDa) yielded uniform spherical microcapsules. The core diameter was 24.8 times greater than the cPPA shell thickness (2.4 to 21.6 µm). Nonionic bis(cyclohexylsulfonyl)diazomethane (BCSD) and N-hydroxynaphthalimide triflate (HNT) PAGs were used as the PAG in the microcapsule shells. BCSD required dual stimuli of UV radiation and post-exposure baking at 60 °C to activate cPPA depolymerization while room temperature irradiation of HNT resulted in instantaneous core release. A 300 s UV exposure (365 nm, 10.8 J/cm2) of the cPPA/HNT microcapsules resulted in 66.5 ± 9.4% core release. Faster core release was achieved by replacing cPPA with a phthalaldehyde/propanal copolymer. A 30 s UV exposure (365 nm, 1.08 J/cm2) resulted in 82 ± 13% core release for the 75 mol % phthalaldehyde/25 mol % propanal copolymer microcapsules. The photoresponsive shell provides a versatile polymer microcapsule technology for on-demand, controlled release of hydrophobic core payloads.

A robust depolymerization route for polysiloxanes.

A versatile, robust, and stable tetrabutylammonium difluorotriphenylsilicate (TBAT) catalyst has been deployed for efficient depolymerization of silicones. This catalyst is soluble in a variety of organic solvents and is stable up to 170 °C, enabling a wide range of reaction conditions under which F--catalysed siloxane bond cleavage can be initiated. This effort offers significant advancement overcoming the traditional limitations of silicone depolymerization, such as high catalyst loading, storage and handling, and few viable reaction media.

Aminobisphosphonates reactivate the latent reservoir in people living with HIV-1.

Antiretroviral therapy (ART) is not curative due to the existence of cellular reservoirs of latent HIV-1 that persist during therapy. Current research efforts to cure HIV-1 infection include "shock and kill" strategies to disrupt latency using small molecules or latency-reversing agents (LRAs) to induce expression of HIV-1 enabling cytotoxic immune cells to eliminate infected cells. The modest success of current LRAs urges the field to identify novel drugs with increased clinical efficacy. Aminobisphosphonates (N-BPs) that include pamidronate, zoledronate, or alendronate, are the first-line treatment of bone-related diseases including osteoporosis and bone malignancies. Here, we show the use of N-BPs as a novel class of LRA: we found in ex vivo assays using primary cells from ART-suppressed people living with HIV-1 that N-BPs induce HIV-1 from latency to levels that are comparable to the T cell activator phytohemagglutinin (PHA). RNA sequencing and mechanistic data suggested that reactivation may occur through activation of the activator protein 1 signaling pathway. Stored samples from a prior clinical trial aimed at analyzing the effect of alendronate on bone mineral density, provided further evidence of alendronate-mediated latency reversal and activation of immune effector cells. Decay of the reservoir measured by IPDA was however not detected. Our results demonstrate the novel use of N-BPs to reverse HIV-1 latency while inducing immune effector functions. This preliminary evidence merits further investigation in a controlled clinical setting possibly in combination with therapeutic vaccination.

Aminobisphosphonates reactivate the latent reservoir in people living with HIV-1.

Antiretroviral therapy (ART) is not curative due to the existence of cellular reservoirs of latent HIV-1 that persist during therapy. Current research efforts to cure HIV-1 infection include "shock and kill" strategies to disrupt latency using small molecules or latency-reversing agents (LRAs) to induce expression of HIV-1 enabling cytotoxic immune cells to eliminate infected cells. The modest success of current LRAs urges the field to identify novel drugs with increased clinical efficacy. Aminobisphosphonates (N-BPs) that include pamidronate, zoledronate, or alendronate, are the first-line treatment of bone-related diseases including osteoporosis and bone malignancies. Here, we show the use of N-BPs as a novel class of LRA: we found in ex vivo assays using primary cells from ART-suppressed people living with HIV-1 that N-BPs induce HIV-1 from latency to levels that are comparable to the T cell activator phytohemagglutinin (PHA). RNA sequencing and mechanistic data suggested that reactivation may occur through activation of the activator protein 1 signaling pathway. Stored samples from a prior clinical trial aimed at analyzing the effect of alendronate on bone mineral density, provided further evidence of alendronate-mediated latency reversal and activation of immune effector cells. Decay of the reservoir measured by IPDA was however not detected. Our results demonstrate the novel use of N-BPs to reverse HIV-1 latency while inducing immune effector functions. This preliminary evidence merits further investigation in a controlled clinical setting possibly in combination with therapeutic vaccination.

Additive Manufacturing of Degradable Materials via Ring-Opening Metathesis Polymerization (ROMP).

Thermoset materials comprise a significant proportion of high-performance plastics due to their shape permanence and excellent thermal and mechanical properties. However, these properties come at the expense of degradability. Here, we show for the first time that the industrial thermoset polydicyclopentadiene (PDCPD) can be additively manufactured (AM) with degradable 2,3-dihydrofuran (DHF) linkages using a photochemical approach. Treatment of the manufactured objects with acid results in rapid degradation to soluble byproducts. This work highlights the potential of ring-opening metathesis polymerization (ROMP) chemistry to create degradable materials amenable to advanced manufacturing processes.

Tuneable phase behaviour and glass transition via polymerization-induced phase separation in crosslinked step-growth polymers.

Once limited to chain-growth polymerizations, fine control over polymerization-induced phase separation (PIPS) has recently been demonstrated in rubber-toughened thermoset materials formed through step-growth polymerizations. The domain length scales of these thermoset materials can be elegantly tuned by utilizing a binary mixture of curing agents (CAs) that individually yield disparate morphologies. Importantly, varying the composition of the binary mixture affects characteristics of the materials such as glass transition temperature and tensile behavior. Here, we establish a full phase diagram of PIPS in a rubber-toughened epoxy system tuned by a binary CA mixture to provide a robust framework of phase behaviour. X-Ray scattering in situ and post-PIPS is employed to elucidate the PIPS mechanism whereby an initial polymerization-induced compositional fluctuation causes nanoscale phase separation of rubber and epoxy components prior to local chain crosslinking and potential macrophase separation. We further demonstrate the universality of this approach by alternatively employing binary epoxy or binary rubber mixtures to achieve broad variations in morphology and glass transitions.

Continuous Additive Manufacturing using Olefin Metathesis.

The development of chemistry is reported to implement selective dual-wavelength olefin metathesis polymerization for continuous additive manufacturing (AM). A resin formulation based on dicyclopentadiene is produced using a latent olefin metathesis catalyst, various photosensitizers (PSs) and photobase generators (PBGs) to achieve efficient initiation at one wavelength (e.g., blue light) and fast catalyst decomposition and polymerization deactivation at a second (e.g., UV-light). This process enables 2D stereolithographic (SLA) printing, either using photomasks or patterned, collimated light. Importantly, the same process is readily adapted for 3D continuous AM, with printing rates of 36 mm h-1 for patterned light and up to 180 mm h-1 using un-patterned, high intensity light.

Aquaculture mediates global transmission of a viral pathogen to wild salmon.

Global expansion of aquaculture and agriculture facilitates disease emergence and catalyzes transmission to sympatric wildlife populations. The health of wild salmon stocks critically concerns Indigenous peoples, commercial and recreational fishers, and the general public. Despite potential impact of viral pathogens such as Piscine orthoreovirus-1 (PRV-1) on endangered wild salmon populations, their epidemiology in wild fish populations remains obscure, as does the role of aquaculture in global and local spread. Our phylogeographic analyses of PRV-1 suggest that development of Atlantic salmon aquaculture facilitated spread from Europe to the North and South East Pacific. Phylogenetic analysis and reverse transcription polymerase chain reaction surveillance further illuminate the circumstances of emergence of PRV-1 in the North East Pacific and provide strong evidence for Atlantic salmon aquaculture as a source of infection in wild Pacific salmon. PRV-1 is now an important infectious agent in critically endangered wild Pacific salmon populations, fueled by aquacultural transmission.

Selectively Depolymerizable Polyurethanes from Unsaturated Polyols Cleavable by Olefin Metathesis.

This communication describes a novel series of linear and crosslinked polyurethanes (PUs) and their selective depolymerization under mild conditions. Two unique polyols are synthesized bearing unsaturated units in a configuration designed to favor ring-closing metathesis (RCM) to five- and six-membered cycloalkenes. These polyols are co-polymerized with toluene diisocyanate to generate linear PUs and trifunctional hexamethylene- and diphenylmethane-based isocyanates to generate crosslinked PUs. The polyol design is such that the RCM reaction cleaves the backbone of the polymer chain. Upon exposure to dilute solutions of Grubbs' catalyst under ambient conditions, the PUs are rapidly depolymerized to low molecular weight, soluble products bearing vinyl and cycloalkene functionalities. These functionalities enable further re-polymerization by traditional strategies for polymerization of double bonds. It is anticipated that this general approach can be expanded to develop a range of chemically recyclable condensation polymers that are readily depolymerized by orthogonal metathesis chemistry.

Heterogeneous Polymer Dynamics Explored Using Static 1H NMR Spectra.

NMR spectroscopy continues to provide important molecular level details of dynamics in different polymer materials, ranging from rubbers to highly crosslinked composites. It has been argued that thermoset polymers containing dynamic and chemical heterogeneities can be fully cured at temperatures well below the final glass transition temperature (Tg). In this paper, we described the use of static solid-state 1H NMR spectroscopy to measure the activation of different chain dynamics as a function of temperature. Near Tg, increasing polymer segmental chain fluctuations lead to dynamic averaging of the local homonuclear proton-proton (1H-1H) dipolar couplings, as reflected in the reduction of the NMR line shape second moment (M2) when motions are faster than the magnitude of the dipolar coupling. In general, for polymer systems, distributions in the dynamic correlation times are commonly expected. To help identify the limitations and pitfalls of M2 analyses, the impact of activation energy or, equivalently, correlation time distributions, on the analysis of 1H NMR M2 temperature variations is explored. It is shown by using normalized reference curves that the distributions in dynamic activation energies can be measured from the M2 temperature behavior. An example of the M2 analysis for a series of thermosetting polymers with systematically varied dynamic heterogeneity is presented and discussed.

Evaluating the impact of a coach development intervention for improving coaching practices in junior football (soccer): The "MASTER" pilot study.

The aim of this pilot study was to evaluate the impact of a novel coach development intervention (MASTER) on coaching practices of football coaches. The study involved six coaches (of 10-12 year old) from one representative football club (Australia February-July 2017). The 15-week multi-component intervention included a face-to-face workshop, ongoing mentoring, modelled training sessions, peer assessments and group discussions. MASTER is underpinned by positive coaching and game-based coaching practices and aimed to educate coaches on how to implement and operationalise a number of evidence-based coaching elements. At each of baseline and immediate post-intervention coaches were filmed three times and evaluated using a modified version of the Coach Analysis Intervention System. Using linear mixed model analysis, significant changes were observed for time spent performing playing-form activities [+15.4% (95% CI 6.01-24.79)(t(15) = 3.5, P = 0.003], with significant changes in the type of interventions undertaken and the nature of feedback given to athletes. Program feasibility was examined using measures of recruitment, retention, adherence and satisfaction. Results indicate program feasibility and high coach evaluation ratings. MASTER demonstrated effectiveness for improving coaching practices of football coaches during training sessions. Further large-scale trials will build evidence for the utility of MASTER for guiding coaching practices in football and other sporting codes.

A multi-stimuli responsive, self-assembling, boronic acid dipeptide.

Modification of the dipeptide of phenylalanine, FF, with a boronic acid (BA) functionality imparts unique aqueous self-assembly behavior that responds to multiple stimuli. Changes in pH and ionic strength are used to trigger hydrogelation via the formation of nanoribbon networks. Furthermore, we show for the first time that the binding of polyols to the BA functionality can modulate a peptide between its assembled and disassembled states.

Amphiphilic triblocks to control assembly of mixed or segregated bilayers and monolayers.

Triblock amphiphilic molecules composed of three distinct segments provide a large parameter space to obtain self-assembled structures beyond what is achievable with conventional amphiphiles. To obtain a molecular understanding of the thermodynamics of self-assembly, we develop a coarse-grained triblock polymer model and apply self-consistent field theory to investigate the packing mechanism into layer structures. By tuning the structural and interaction asymmetry, we are able to obtain bilayers and monolayers, where the latter may additionally be mixed (symmetric) or segregated (asymmetric). Of particular interest for a variety of applications are the asymmetric monolayers, where segregation of end blocks to opposite surfaces is expected to have important implications for the development of functional nanotubes and vesicles with distinct surface chemistries.

Surfactant-induced assembly of enzymatically-stable peptide hydrogels.

The secondary structure of peptides in the presence of interacting additives is an important topic of study, having implications in the application of peptide science to a broad range of modern technologies. Surfactants constitute a class of biologically relevant compounds that are known to influence both peptide conformation and aggregation or assembly. We have characterized the secondary structure of a linear nonapeptide composed of a hydrophobic alanine/phenylalanine core flanked by hydrophilic acid/amine units. We show that the anionic surfactant sodium dodecyl sulfate (SDS) induces the formation of ß-sheets and macroscopic gelation in this otherwise unstructured peptide. Through comparison to related additives, we propose that SDS-induced secondary structure formation is the result of amphiphilicity created by electrostatic binding of SDS to the peptide. In addition, we demonstrate a novel utility of surfactants in manipulating and stabilizing peptide nanostructures. SDS is used to simultaneously induce secondary structure in a peptide and to inhibit the activity of a model enzyme, resulting in a peptide hydrogel that is impervious to enzymatic degradation. These results complement our understanding of the behavior of peptides in the presence of interacting secondary molecules and provide new potential pathways for programmable organization of peptides by the addition of such components.

Hierarchically structured materials from block polymer confinement within bicontinuous microemulsion-derived nanoporous polyethylene.

The self-assembly behavior of block polymers under strong two-dimensional and three-dimensional confinement has been well-studied in the past decade. Confinement effects enable access to a large suite of morphologies not typically observed in the bulk. We have used nanoporous polyethylene, derived from a polymeric bicontinuous microemulsion, as a novel template for the confinement of several different cylinder-forming block polymer systems: poly(isoprene-b-2-vinylpyridine), poly(styrene-b-isoprene), and poly(isoprene-b-dimethylsiloxane). The resultant materials exhibit unique hierarchical arrangements of structure with two distinct length scales. First, the polyethylene template imparts a disordered, microemulsion-like periodicity between bicontinuous polyethylene and block polymer networks with sizes on the order of 100 nm. Second, the block polymer networks display internal periodic arrangements produced by the spontaneous segregation of their incompatible constituents. The microphase-separated morphologies observed are similar to those previously reported for confinement of block polymers in cylindrical pores. However, at present, the morphologies are spatially variant in a complex manner, due to the three-dimensionally interconnected nature of the confining geometry and its distribution in pore sizes. We have further exploited the unique structure of the polyethylene template to generate new hierarchically structured porous monoliths. Poly(isoprene-b-2-vinylpyridine) is used as a model system in which the pyridine block is cross-linked, post-infiltration, and the polyethylene template is subsequently extracted. The resultant materials possess a three-dimensionally continuous pore network, of which the pore walls retain the unique, microphase-separated morphology of the confined block polymer.

Nanoporous polyethylene thin films templated by polymeric bicontinuous microemulsions: evolution of morphology on non-neutral substrates.

Polymeric bicontinuous microemulsions (BµE), found in well-designed ternary blends of two homopolymers and a diblock copolymer, have been extensively studied in the bulk, for example, as versatile templates for the synthesis of nanoporous materials. However, there have been few reports regarding BµE-forming blends as films and the potential impact of confinement on the morphology of such blends. We have investigated the morphology of ternary blends of polyethylene (PE), poly(ethylene-alt-propylene) (PEP), and poly(ethylene-b-ethylene-alt-propylene) (PE-PEP) on a variety of substrates. The films were rendered nanoporous by selective extraction of the PEP component, which also created contrast for scanning electron microscopy (SEM). Blends that form BµEs in the bulk were found to undergo an evolution of morphology from a BµE to a macro-phase separated state, induced by the segregation of blend components to the film interfaces. The dynamics of the transformation are accelerated by decreasing film thickness. The results presented indicate that BµEs can be kinetically trapped on arbitrary substrates, which has important implications for the production of bicontinuous, nanoporous films.

Team effectiveness in primary care networks in Alberta.

Primary care networks (PCNs) are interdisciplinary programs in a geographical area that are designed to improve patient care, team collaboration and appropriate resource allocation. They are one of government's approaches to delivering quality healthcare with finite resources. The primary objective of this study was to explore the level of perceived team effectiveness in PCNs within three former health regions in Alberta. A descriptive, cross-sectional, exploratory, semi-structured questionnaire study design was employed. Respondents identified five themes for strategies to improve team effectiveness. Although many factors and strategies were identified, more work is needed to explore the study's findings.

Development of a combined sex pheromone-based monitoring system for Malacosoma disstria (Lepidoptera: Lasoicampidae) and Choristoneura conflictana (Lepidoptera: Tortricidae).

Sympatric insect species that do not share sex pheromone components but have a common host and overlapping adult flight periods are potential targets for the development of a combined sex pheromone-based monitoring tool. A system using a single synthetic pheromone blend in a single lure to bait a single trap to monitor two pests simultaneously represents a novel approach. In this study, a combined pheromone-based monitoring system was developed for two lepidopterous defoliators of trembling aspen Populus tremuloides Michenaux in western Canada, Malacosoma disstria Hübner (Lepidoptera: Lasoicampidae) and Choristoneura conflictana (Walker) (Lepidoptera: Tortricidae). Efficacy and longevity of a lure containing both species' pheromones were tested. Immature stages of each species were sampled to evaluate the ability of pheromone traps baited with the combined lure to predict population density. The combined lure was as attractive to M. disstria and C. conflictana males as were traps baited with each species' pheromone alone. Lure age had no effect on attraction of male C. conflictana to the combined lure but had a negative effect on attraction of M. disstria. The number of male moths captured in traps baited with the combined lure was related to immature counts for both species. Pupal counts of M. disstria and larval counts of C. conflictana provided the best relationships with male captures. The combined lure does not attract M. disstria males in direct proportion to population density, because trap catch was comparatively low at high-density M. disstria sites.