Quantum chemistry simulation of ground- and excited-state properties of the sulfonium cation on a superconducting quantum processor.

The computational description of correlated electronic structure, and particularly of excited states of many-electron systems, is an anticipated application for quantum devices. An important ramification is to determine the dominant molecular fragmentation pathways in photo-dissociation experiments of light-sensitive compounds, like sulfonium-based photo-acid generators used in photolithography. Here we simulate the static and dynamical electronic structure of the H3S+ molecule, taken as a minimal model of a triply-bonded sulfur cation, on a superconducting quantum processor of the IBM Falcon architecture. To this end, we generalize a qubit reduction technique termed entanglement forging or EF [A. Eddins et al., Phys. Rev. X Quantum, 2022, 3, 010309], currently restricted to the evaluation of ground-state energies, to the treatment of molecular properties. While in a conventional quantum simulation a qubit represents a spin-orbital, within EF a qubit represents a spatial orbital, reducing the number of required qubits by half. We combine the generalized EF with quantum subspace expansion [W. Colless et al., Phys. Rev. X, 2018, 8, 011021], a technique used to project the time-independent Schrodinger equation for ground- and excited-states in a subspace. To enable experimental demonstration of this algorithmic workflow, we deploy a sequence of error-mitigation techniques. We compute dipole structure factors and partial atomic charges along ground- and excited-state potential energy curves, revealing the occurrence of homo- and heterolytic fragmentation. This study is an important step towards the computational description of photo-dissociation on near-term quantum devices, as it can be generalized to other photodissociation processes and naturally extended in different ways to achieve more realistic simulations.

A Cation-Dependent Dual Activation Motif for Anionic Ring-Opening Polymerization of Cyclic Esters.

A new organocatalyst for the ring-opening polymerization of lactones has been identified. Under the tested conditions, the anions of 2,2'-bisindole promote fast, living polymerizations (as short as 10 ms) which are selective for chain elongation over transesterification (D ≤ 1.1). While structurally related to (thio)urea anion catalysts, anions of 2,2'-bisindole activate the monomer via the counterion rather than through hydrogen bonding. This new activation motif enables modulation of the polymerization rate by 2 orders of magnitude by changing the counterion.

Computational Investigations of the Lithium Superoxide Dimer Rearrangement on Noisy Quantum Devices.

Quantum chemistry studies of biradical systems are challenging due to the required multiconfigurational nature of the wavefunction. In this work, Variational Quantum Eigensolver (VQE) is used to compute the energy profile for the lithium superoxide dimer rearrangement, involving biradical species, on quantum simulators and devices. Considering that current quantum devices can only handle limited number of qubits, we present guidelines for selecting an appropriate active space to perform computations on chemical systems that require many qubits. We show that with VQE performed with a quantum simulator reproduces results obtained with full-configuration interaction (Full CI) for the chosen active space. However, results deviate from exact values by about 39 mHa for calculations on a quantum device. This deviation can be improved to about 4 mHa using the readout mitigation approach and can be further improved to 2 mHa, approaching chemical accuracy, using the state tomography technique to purify the calculated quantum state.

Catalysis as an Enabling Science for Sustainable Polymers.

The replacement of current petroleum-based plastics with sustainable alternatives is a crucial but formidable challenge for the modern society. Catalysis presents an enabling tool to facilitate the development of sustainable polymers. This review provides a system-level analysis of sustainable polymers and outlines key criteria with respect to the feedstocks the polymers are derived from, the manner in which the polymers are generated, and the end-of-use options. Specifically, we define sustainable polymers as a class of materials that are derived from renewable feedstocks and exhibit closed-loop life cycles. Among potential candidates, aliphatic polyesters and polycarbonates are promising materials due to their renewable resources and excellent biodegradability. The development of renewable monomers, the versatile synthetic routes to convert these monomers to polyesters and polycarbonate, and the different end-of-use options for these polymers are critically reviewed, with a focus on recent advances in catalytic transformations that lower the technological barriers for developing more sustainable replacements for petroleum-based plastics.

Erratum: Organocatalyzed synthesis of fluorinated poly(aryl thioethers).

A correction to this article has been published and is linked from the HTML version of this article.

The trimerization of acetylenes involves a cascade of biradical and pericyclic processes.

Thorough computational studies were performed on mechanisms and energies for the thermal trimerizations of neutral or electron-rich acetylenes used as cross-linkers in organic hard-masks for lithography applications. These studies indicate that the operative mechanism proceeds through initial cyclobutadiene formation via a biradical mechanism. Cyclobutadienes form Dewar benzenes via Diels-Alder cycloadditions, or biradical processes, or both, before producing benzenes by electrocyclic ring-opening reactions. These pathways are preferred to alternatives involving concerted trimerizations or mechanisms involving carbene intermediates.

Organocatalyzed synthesis of fluorinated poly(aryl thioethers).

The preparation of high-performance fluorinated poly(aryl thioethers) has received little attention compared to the corresponding poly(aryl ethers), despite the excellent physical properties displayed by many polysulfides. Herein, we report a highly efficient route to fluorinated poly(aryl thioethers) via an organocatalyzed nucleophilic aromatic substitution of silyl-protected dithiols. This approach requires low catalyst loadings, proceeds rapidly at room temperature, and is effective for many different perfluorinated or highly activated aryl monomers. Computational investigations of the reaction mechanism reveal an unexpected, concerted SNAr mechanism, with the organocatalyst playing a critical, dual-activation role in facilitating the process. Not only does this remarkable reactivity enable rapid access to fluorinated poly(aryl thioethers), but also opens new avenues for the processing, fabrication, and functionalization of fluorinated materials with easy removal of the volatile catalyst and TMSF byproducts.Fluorinated poly(aryl thioethers), unlike their poly(aryl ethers) counterparts, have received little attention despite excellent physical properties displayed by many polysulfides. Here the authors show a highly efficient route to fluorinated poly(aryl thioethers) via an organocatalyzed nucleophilic aromatic substitution of silyl-protected dithiols.

Non-Isocyanate Polyurethane Soft Nanoparticles Obtained by Surfactant-Assisted Interfacial Polymerization.

Polyurethanes (PUs) are considered ideal candidates for drug delivery applications due to their easy synthesis, excellent mechanical properties, and biodegradability. Unfortunately, methods for preparing well-defined PU nanoparticles required miniemulsion polymerization techniques with a nontrivial control of the polymerization conditions due to the inherent incompatibility of isocyanate-containing monomers and water. In this work, we report the preparation of soft PU nanoparticles in a one-pot process using interfacial polymerization that employs a non-isocyanate polymerization route that minimizes side reactions with water. Activated pentafluorophenyl dicarbonates were polymerized with diamines and/or triamines by interfacial polymerization in the presence of an anionic emulsifier, which afforded non-isocyanate polyurethane (NIPU) nanoparticles with sizes in the range of 200-300 nm. Notably, 5 wt % of emulsifier was required in combination with a trifunctional amine to achieve stable PU dispersions and avoid particle aggregation. The versatility of this polymerization process allows for incorporation of functional groups into the PU nanoparticles, such as carboxylic acids, which can encapsulate the chemotherapeutic doxorubicin through ionic interactions. Altogether, this waterborne synthetic method for functionalized NIPU soft nanoparticles holds great promise for the preparation of drug delivery nanocarriers.

Fast and selective ring-opening polymerizations by alkoxides and thioureas.

Ring-opening polymerization of lactones is a versatile approach to generate well-defined functional polyesters. Typical ring-opening catalysts are subject to a trade-off between rate and selectivity. Here we describe an effective catalytic system combining alkoxides with thioureas that catalyses rapid and selective ring-opening polymerizations. Deprotonation of thioureas by sodium, potassium or imidazolium alkoxides generates a hydrogen-bonded alcohol adduct of the thiourea anion (thioimidate). The ring-opening polymerization of L-lactide mediated by these alcohol-bonded thioimidates yields highly isotactic polylactide with fast kinetics and living polymerization behaviour, as evidenced by narrow molecular weight distributions (Mw/Mn < 1.1), chain extension experiments and minimal transesterifications. Computational studies indicate a bifunctional catalytic mechanism whereby the thioimidate activates the carbonyl of the monomer and the alcohol initiator/chain end to effect the selective ring-opening of lactones and carbonates. The high selectivity of the catalyst towards monomer propagation over transesterification is attributed to a selective activation of monomer over polymer chains.

Computational and experimental investigations of one-step conversion of poly(carbonate)s into value-added poly(aryl ether sulfone)s.

It is estimated that ∼2.7 million tons poly(carbonate)s (PCs) are produced annually worldwide. In 2008, retailers pulled products from store shelves after reports of bisphenol A (BPA) leaching from baby bottles, reusable drink bottles, and other retail products. Since PCs are not typically recycled, a need for the repurposing of the PC waste has arisen. We report the one-step synthesis of poly(aryl ether sulfone)s (PSUs) from the depolymerization of PCs and in situ polycondensation with bis(aryl fluorides) in the presence of carbonate salts. PSUs are high-performance engineering thermoplastics that are commonly used for reverse osmosis and water purification membranes, medical equipment, as well as high temperature applications. PSUs generated through this cascade approach were isolated in high purity and yield with the expected thermal properties and represent a procedure for direct conversion of one class of polymer to another in a single step. Computational investigations performed with density functional theory predict that the carbonate salt plays two important catalytic roles in this reaction: it decomposes the PCs by nucleophilic attack, and in the subsequent polyether formation process, it promotes the reaction of phenolate dimers formed in situ with the aryl fluorides present. We envision repurposing poly(BPA carbonate) for the production of value-added polymers.

Developments in Dynamic Covalent Chemistries from the Reaction of Thiols with Hexahydrotriazines.

Dynamic covalent chemistries have garnered significant attention for their potential to revolutionize technologies in the material fields (engineering, biomedical, and sensors) and synthetic design strategies as they provide access to stimuli responsiveness and adaptive behaviors. However, only a limited number of molecular motifs have been known to display this dynamic behavior under mild conditions. Here, we identified a dynamic covalent motif-thioaminals-that is produced from the reaction of hexahydrotriazines (HTs) with thiols. Furthermore, we report on the synthesis of a new family of step-growth polymers based on this motif. The condensation efficiently proceeds to quantitative yields within a short time frame and offers versatility in functional group tolerance; thus, it can be exploited to synthesize both small molecule thioaminals as well as high molecular weight polymers from the step-growth polymerization of HTs with dithiols. Careful evaluation of substituted HTs and organic thiols supported by DFT calculations led to a chemically diverse library of polymers based on this motif. Finally, dynamic substitution reactions were employed toward the facile preparation of functional oligomers and macromolecules. This dynamic covalent motif is particularly attractive for a range of applications that include material design and drug delivery due to the economic feasibility of synthesis.

A Simple and Facile Approach to Aliphatic N-Substituted Functional Eight-Membered Cyclic Carbonates and Their Organocatalytic Polymerization.

Aliphatic N-substituted functional eight-membered cyclic carbonates were synthesized from N-substituted diethanolamines by intramolecular cyclization. On the basis of the N-substituent, three major subclasses of carbonate monomers were synthesized (N-aryl, N-alkyl and N-carbamate). Organocatalytic ring opening polymerization (ROP) of eight-membered cyclic carbonates was explored as a route to access narrowly dispersed polymers of predictable molecular weights. Polymerization kinetics was highly dependent on the substituent on the nitrogen atom and the catalyst used for the reaction. The use of triazabicyclodecene (TBD), instead of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), as the catalyst for the N-alkyl substituted monomers significantly enhanced the rate of polymerizations. Computational studies were performed to rationalize the observed trends for TBD catalyzed polymerizations. With the optimal organocatalyst all monomers could be polymerized generating well-defined polymers within a timespan of ≤2 h with relatively high monomer conversion (≥80%) and low molar-mass dispersity (D(M) ≤ 1.3). Both the glass transition temperatures (T(g)) and onset of degradation temperatures (T(onset)) of these polymers were found to be N-substituent dependent and were in the range of about -45 to 35 °C and 230 to 333 °C, respectively. The copolymerization of the eight membered monomers with 6-membered cyclic comonomers including commercially available l-lactide and trimethylene carbonate produced novel copolymers. The combination of inexpensive starting materials, ease of ring-closure and subsequent polymerization makes this an attractive route to functional polycarbontes.

Supramolecular motifs in dynamic covalent PEG-hemiaminal organogels.

Dynamic covalent materials are stable materials that possess reversible behaviour triggered by stimuli such as light, redox conditions or temperature; whereas supramolecular crosslinks depend on the equilibrium constant and relative concentrations of crosslinks as a function of temperature. The combination of these two reversible chemistries can allow access to materials with unique properties. Here, we show that this combination of dynamic covalent and supramolecular chemistry can be used to prepare organogels comprising distinct networks. Two materials containing hemiaminal crosslink junctions were synthesized; one material is comprised of dynamic covalent junctions and the other contains hydrogen-bonding bis-hemiaminal moieties. Under specific network synthesis conditions, these materials exhibited self-healing behaviour. This work reports on both the molecular-level detail of hemiaminal crosslink junction formation as well as the macroscopic behaviour of hemiaminal dynamic covalent network (HDCN) elastomeric organogels. These materials have potential applications as elastomeric components in printable materials, cargo carriers and adhesives.

Melt-processable dynamic-covalent poly(hemiaminal) organogels as scaffolds for UV-induced polymerization.

Hemiaminal poly(ethylene glycol) (PEG)-based organogels are formulated in polymerizable solvents. The dynamic-covalent nature of the solvent-H-bonded hemiaminal crosslinks, together with the modification of the crosslinking density of the organogels allows for temperature-dependent viscoelastic control. The shape of uncured gels can be permanently retained by templated UV-curing of the solvent, offering great promise for complex manufacturing, printing, sealants, and materials repair.

Development of a method for detecting trace metals in aqueous solutions based on the coordination chemistry of hexahydrotriazines.

The detection of trace amounts (<10 ppb) of heavy metals in aqueous solutions is described using 1,3,5-hexahydro-1,3,5-triazines (HTs) as chemical indicators and a low cost fluorimeter-based detection system. This method takes advantage of the inherent properties of HTs to coordinate strongly with metal ions in solution, a fundamental property that was studied using a combination of analytical tools (UV-Vis titrations, (1)H-NMR titrations and computational modeling). Based on these fundamental studies that show significant changes in the HT UV signature when a metal ion is present, HT compounds were used to prepare indicator strips that resulted in significant fluorescence changes when a metal was present. A portable and economical approach was adopted to test the concept of utilizing HTs to detect heavy metals using a fluorimeter system that consisted of a low-pressure mercury lamp, a photo-detector, a monolithic photodiode and an amplifier, which produces a voltage proportional to the magnitude of the visible fluorescence emission. Readings of the prepared HT test strips were evaluated by exposure to two different heavy metals at the safe threshold concentration described by the U.S. Environmental Protection Agency (EPA) for Cr(3+) and Ag(2+) (100 µg L(-1) and 6.25, respectively). This method of detection could be used to the presence of either metal at these threshold concentrations.

N-Heterocyclic Carbene-Catalyzed Ring Opening Polymerization of ε-Caprolactone with and without Alcohol Initiators: Insights from Theory and Experiment.

Computational investigations with density functional theory (DFT) have been performed on the N-heterocyclic carbene (NHC) catalyzed ring-opening polymerization of ε-caprolactone in the presence and in the absence of a methanol initiator. Much like the zwitterionic ring opening (ZROP) of δ-valerolactone which was previously reported, calculations predict that the mechanism of the ZROP of caprolactone that occurs without an alcohol present involves a high-barrier step involving ring opening of the zwitterionic tetrahedral intermediate formed after the initial nucleophilic attack of NHC on caprolactone. However, the operative mechanism by which caprolactone is polymerized in the presence of an alcohol initiator does not involve the analogous mechanism involving initial nucleophilic attack by the organocatalytic NHC. Instead, the NHC activates the alcohol through hydrogen bonding and promotes nucleophilic attack and the subsequent ring-opening steps that occur during polymerization. The largest free energy barrier for the hydrogen-bonding mechanism in alcohol involves nucleophilic attack, while that for both ZROP processes involves ring opening of the initially formed zwitterionic tetrahedral intermediate. The DFT calculations predict that the rate of polymerization in the presence of alcohol is faster than the reaction performed without an alcohol initiator; this prediction has been validated by experimental kinetic studies.

Computational and experimental studies on the mechanism of formation of poly(hexahydrotriazine)s and poly(hemiaminal)s from the reactions of amines with formaldehyde.

Combined experimental and computational studies have been performed on the mechanism of formation of poly(hexahydrotriazine) and hemiaminal dynamic covalent network (PHT and HDCN) thermosetting polymers from the reactions of diamines with formaldehyde (Science 2014, 344, 732-735). Results suggest that these polymers are formed by a mechanism involving the water promoted stepwise addition of amines with formaldehyde in preference to dimerization or cyclotrimerization of imine intermediates or self-catalysis by the amine reagents. The predicted mechanism also explains experimentally observed electronic effects for hexahydrotriazine formation.

Recyclable, strong thermosets and organogels via paraformaldehyde condensation with diamines.

Nitrogen-based thermoset polymers have many industrial applications (for example, in composites), but are difficult to recycle or rework. We report a simple one-pot, low-temperature polycondensation between paraformaldehyde and 4,4'-oxydianiline (ODA) that forms hemiaminal dynamic covalent networks (HDCNs), which can further cyclize at high temperatures, producing poly(hexahydrotriazine)s (PHTs). Both materials are strong thermosetting polymers, and the PHTs exhibited very high Young's moduli (up to ~14.0 gigapascals and up to 20 gigapascals when reinforced with surface-treated carbon nanotubes), excellent solvent resistance, and resistance to environmental stress cracking. However, both HDCNs and PHTs could be digested at low pH (<2) to recover the bisaniline monomers. By simply using different diamine monomers, the HDCN- and PHT-forming reactions afford extremely versatile materials platforms. For example, when poly(ethylene glycol) (PEG) diamine monomers were used to form HDCNs, elastic organogels formed that exhibited self-healing properties.

Experimental and computational studies on the mechanism of zwitterionic ring-opening polymerization of δ-valerolactone with N-heterocyclic carbenes.

Experimental and computational investigations of the zwitterionic ring-opening polymerization (ZROP) of δ-valerolactone (VL) catalyzed by the N-heterocyclic carbenes (NHC) 1,3-diisopropyl-4,5-dimethyl-imidazol-2-ylidene (1) and 1,3,4,5-tetramethyl-imidazol-2-ylidene (2) were carried out. The ZROP of δ-valerolactone generates cyclic poly(valerolactone)s whose molecular weights are higher than predicted from [VL]0/[NHC]0. Kinetic studies reveal the rate of polymerization is first order in [VL] and first order in [NHC]. Density functional theory (DFT) calculations were carried out to elucidate the key steps involved in the ring-opening of δ-valerolactone and its subsequent oligomerization. These studies have established that the initial steps of the mechanism involve nucleophilic attack of the NHC on δ-valerolactone to form a zwitterionic tetrahedral intermediate. DFT calculations indicate that the highest activation barrier of the entire mechanism is associated with the ring-opening of the tetrahedral intermediate formed from the NHC and δ-valerolactone, a result consistent with inefficient initiation to generate reactive zwitterions. The large barrier in this step is due to the fact that ring-opening requires a partial positive charge to develop next to the directly attached NHC moiety which already bears a delocalized positive charge.

Organic acid-catalyzed polyurethane formation via a dual-activated mechanism: unexpected preference of N-activation over O-activation of isocyanates.

A systematic study of acid organocatalysts for the polyaddition of poly(ethylene glycol) to hexamethylene diisocyanate in solution has been performed. Among organic acids evaluated, sulfonic acids were found the most effective for urethane formations even when compared with conventional tin-based catalysts (dibutyltin dilaurate) or 1,8-diazabicyclo[5.4.0]undec-7-ene. In comparison, phosphonic and carboxylic acids showed considerably lower catalytic activities. Furthermore, sulfonic acids gave polyurethanes with higher molecular weights than was observed using traditional catalyst systems. Molecular modeling was conducted to provide mechanistic insight and supported a dual activation mechanism, whereby ternary adducts form in the presence of acid and engender both electrophilic isocyanate activation and nucleophilic alcohol activation through hydrogen bonding. Such a mechanism suggests catalytic activity is a function of not only acid strength but also inherent conjugate base electron density.