The Nanoscale Structure and Stability of Organic Photovoltaic Blends Processed with Solvent Additives.

Controlling the nanomorphology in bulk heterojunction photoactive blends is crucial for optimizing the performance and stability of organic photovoltaic (OPV) technologies. A promising approach is to alter the drying dynamics and consequently, the nanostructure of the blend film using solvent additives such as 1,8-diiodooctane (DIO). Although this approach is demonstrated extensively for OPV systems incorporating fullerene-based acceptors, it is unclear how solvent additive processing influences the morphology and stability of nonfullerene acceptor (NFA) systems. Here, small angle neutron scattering (SANS) is used to probe the nanomorphology of two model OPV systems processed with DIO: a fullerene-based system (PBDB-T:PC71BM) and an NFA-based system (PBDB-T:ITIC). To overcome the low intrinsic neutron scattering length density contrast in polymer:NFA blend films, the synthesis of a deuterated NFA analog (ITIC-d52) is reported. Using SANS, new insights into the nanoscale evolution of fullerene and NFA-based systems are provided by characterizing films immediately after fabrication, after thermal annealing, and after aging for 1 year. It is found that DIO processing influences fullerene and NFA-based systems differently with NFA-based systems characterized by more phase-separated domains. After long-term aging, SANS reveals both systems demonstrate some level of thermodynamic induced domain coarsening.

Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion.

Blends comprising organic semiconductors and inorganic quantum dots (QDs) are relevant for many optoelectronic applications and devices. However, the individual components in organic-QD blends have a strong tendency to aggregate and phase-separate during film processing, compromising both their structural and electronic properties. Here, we demonstrate a QD surface engineering approach using electronically active, highly soluble semiconductor ligands that are matched to the organic semiconductor host material to achieve well-dispersed inorganic-organic blend films, as characterized by X-ray and neutron scattering, and electron microscopies. This approach preserves the electronic properties of the organic and QD phases and also creates an optimized interface between them. We exemplify this in two emerging applications, singlet-fission-based photon multiplication (SF-PM) and triplet-triplet annihilation-based photon upconversion (TTA-UC). Steady-state and time-resolved optical spectroscopy shows that triplet excitons can be transferred with near unity efficiently across the organic-inorganic interface, while the organic films maintain efficient SF (190% yield) in the organic phase. By changing the relative energy between organic and inorganic components, yellow upconverted emission is observed upon 790 nm NIR excitation. Overall, we provide a highly versatile approach to overcome longstanding challenges in the blending of organic semiconductors with QDs that have relevance for many optical and optoelectronic applications.

The influence of voxelotor on cerebral blood flow and oxygen extraction in pediatric sickle cell disease.

ABSTRACT: Voxelotor is an inhibitor of sickle hemoglobin polymerization that is used to treat sickle cell disease. Although voxelotor has been shown to improve anemia, the clinical benefit on the brain remains to be determined. This study quantified the cerebral hemodynamic effects of voxelotor in children with sickle cell anemia (SCA) using noninvasive diffuse optical spectroscopies. Specifically, frequency-domain near-infrared spectroscopy combined with diffuse correlation spectroscopy were used to noninvasively assess regional oxygen extraction fraction (OEF), cerebral blood volume, and an index of cerebral blood flow (CBFi). Estimates of CBFi were first validated against arterial spin-labeled magnetic resonance imaging (ASL-MRI) in 8 children with SCA aged 8 to 18 years. CBFi was significantly positively correlated with ASL-MRI-measured blood flow (R2 = 0.651; P = .015). Next, a single-center, open-label pilot study was completed in 8 children with SCA aged 4 to 17 years on voxelotor, monitored before treatment initiation and at 4, 8, and 12 weeks (NCT05018728). By 4 weeks, both OEF and CBFi significantly decreased, and these decreases persisted to 12 weeks (both P < .05). Decreases in CBFi were significantly correlated with increases in blood hemoglobin (Hb) concentration (P = .025), whereas the correlation between decreases in OEF and increases in Hb trended toward significance (P = .12). Given that previous work has shown that oxygen extraction and blood flow are elevated in pediatric SCA compared with controls, these results suggest that voxelotor may reduce cerebral hemodynamic impairments. This trial was registered at www.ClinicalTrials.gov as #NCT05018728.

Diagnostic Excellence in Pediatric Spine Imaging: Using Contextualized Imaging Protocols.

Contextual design and selection of MRI protocols is critical for making an accurate diagnosis given the wide variety of clinical indications for spine imaging in children. Here, we describe our pediatric spine imaging protocols in detail, tailored to specific clinical questions.

Insights into the kinetics and self-assembly order of small-molecule organic semiconductor/quantum dot blends during blade coating.

Organic-inorganic nanocomposite films formed from blends of small-molecule organic semiconductors and colloidal quantum dots are attractive candidates for high efficiency, low-cost solar energy harvesting devices. Understanding and controlling the self-assembly of the resulting organic-inorganic nanocomposite films is crucial in optimising device performance, not only at a lab-scale but for large-scale, high-throughput printing and coating methods. Here, in situ grazing incidence X-ray scattering (GIXS) gives direct insights into how small-molecule organic semiconductors and colloidal quantum dots self-assemble during blade coating. Results show that for two blends separated only by a small difference in the structure of the small molecule forming the organic phase, crystallisation may proceed down two distinct routes. It either occurs spontaneously or is mediated by the formation of quantum dot aggregates. Irrespective of the initial crystallisation route, the small-molecule crystallisation acts to exclude the quantum dot inclusions from the growing crystalline matrix phase. These results provide important fundamental understanding of structure formation in nanocomposite films of organic small molecules and colloidal quantum dots prepared via solution processing routes. It highlights the fundamental difference to structural evolution which can be made by seemingly small changes in system composition. It provides routes for the structural design and optimisation of solution-processed nanocomposites that are compatible with the large-scale deposition manufacturing techniques that are crucial in driving their wider adoption in energy harvesting applications.

Mixed Small-Molecule Matrices Improve Nanoparticle Dispersibility in Organic Semiconductor-Nanoparticle Films.

Controlling the dispersibility of nanocrystalline inorganic quantum dots (QDs) within organic semiconductor (OSC):QD nanocomposite films is critical for a wide range of optoelectronic devices. This work demonstrates how small changes to the OSC host molecule can have a dramatic detrimental effect on QD dispersibility within the host organic semiconductor matrix as quantified by grazing incidence X-ray scattering. It is commonplace to modify QD surface chemistry to enhance QD dispersibility within an OSC host. Here, an alternative route toward optimizing QD dispersibilities is demonstrated, which dramatically improves QD dispersibilities through blending two different OSCs to form a fully mixed OSC matrix phase.

Ferrocene tethered boramidinate frustrated Lewis pairs: stepwise capture of CO2 and CO.

The synthesis and reactivity of novel ferrocene tethered boramidinate frustrated Lewis pairs (FLPs), capable of the sequential capture of small molecules, is reported. Reactions of 1,1'-dicarbodiimidoferrocenes with different boranes provides access to metallocene tethered FLPs. The reactivity of the boramidinate moieties can be tuned by the nature of the carbodiimido substituents (alkyl vs. aryl) and the borane used in the reduction (9-borabicyclo[3.3.1]nonane [(C8H14)2BH]2vs. bis-pentafluorophenyl borane [(C6F5)2BH]2). The boramidinate FLP arms do not engage in intramolecular reactions, allowing for independent small molecule capture by each FLP. By careful synthetic control, sequential capture of different gaseous small molecules (CO2 and CO or CO2 and CNtBu) by the same bis(boramidinate)ferrocene molecule has been demonstrated.

Ultrafast exciton transport at early times in quantum dot solids.

Quantum dot (QD) solids are an emerging platform for developing a range of optoelectronic devices. Thus, understanding exciton dynamics is essential towards developing and optimizing QD devices. Here, using transient absorption microscopy, we reveal the initial exciton dynamics in QDs with femtosecond timescales. We observe high exciton diffusivity (~102 cm2 s-1) in lead chalcogenide QDs within the first few hundred femtoseconds after photoexcitation followed by a transition to a slower regime (~10-1-1 cm2 s-1). QD solids with larger interdot distances exhibit higher initial diffusivity and a delayed transition to the slower regime, while higher QD packing density and heterogeneity accelerate this transition. The fast transport regime occurs only in materials with exciton Bohr radii much larger than the QD sizes, suggesting the transport of delocalized excitons in this regime and a transition to slower transport governed by exciton localization. These findings suggest routes to control the optoelectronic properties of QD solids.

Utilization of 3D MRI for the Evaluation of Sphincter Pharyngoplasty Insertion Site in Patients With Velopharyngeal Dysfunction.

Sphincter pharyngoplasty is a surgical method to treat velopharyngeal dysfunction. However, surgical failure is often noted and postoperative assessment frequently reveals low-set pharyngoplasties. Past studies have not quantified pharyngoplasty tissue changes that occur postoperatively and gaps remain related to the patient-specific variables that influence postoperative change. The purpose of this study was to utilize advanced three-dimensional imaging and volumetric magnetic resonance imaging (MRI) data to visualize and quantify pharyngoplasty insertion site and postsurgical tissue changes over time.A prospective, repeated measures design was used for the assessment of craniometric and velopharyngeal variables postsurgically. Imaging was completed across two postoperative time points. Tissue migration, pharyngoplasty dimensions, and predictors of change were analyzed across imaging time points.Significant differences were present between the initial location of pharyngoplasty tissue and the pharyngoplasty location 2 to 4 months postoperatively. The average postoperative inferior movement of pharyngoplasty tissue was 6.82 mm, although notable variability was present across participants. The pharyngoplasty volume decreased by 30%, on average.Inferior migration of the pharyngoplasty tissue was present in all patients. Gravity, scar contracture, and patient-specific variables likely interact, impacting final postoperative pharyngoplasty location. The use of advanced imaging modalities, such as 3D MRI, allows for the quantification and visualization of tissue change. There is a need for continued identification of patient-specific factors that may impact the amount of inferior tissue migration and scar contracture postoperatively.

COVID-19 Related Experiences Among College Students With and Without Disabilities: Psychosocial Impacts, Supports, and Virtual Learning Environments.

This cross-sectional analysis estimated differences, based on disability status, in college students' (n = 777) experiences during the COVID-19 pandemic. Data were modeled using t-tests and logistic regression. Most participants were white (86.2%), and women (66.4%). The mode age was 23. A third (35.6%) had at least one disability. Students reported high rates of psychosocial distress, like fear of contracting (59.7%) and spreading (74.3%) COVID-19, worry about friends and family (83.7%), and increased anxiety (72.5%), depression (59.9%), and substance use (24.7%). Forty-two percent (42.2%) were scared they would miss out on their education through virtual classes. About a third feared forgetting assignments (34.1%) and making mistakes (33.9%). Fewer students expressed apprehension about (27.9%) and intimidation by (26.3%) virtual learning. Only 17.2% would continue taking virtual classes after the pandemic. Students with disabilities (M = 12.4, SD = 4.1) experienced more psychosocial stressors compared to students without disabilities (M = 9.9, SD = 4.2), [t(775) = 7.86, p < 0.001]. In adjusted models, disabled students were more than twice as likely to experience worry about medical bills (OR = 2.29), loneliness (OR = 2.09), and increased anxiety (OR = 2.31). They were also more than three times as likely to report increased depression (OR = 3.51) and changes in sexual activity (OR = 3.12). However, students with disabilities (M = 1.5, SD = 1.1) also reported receiving more support compared to their non-disabled classmates (M = 1.1, SD = 1.1), [t(775) = 6.06, p < 0.001]. Disabled students were more likely to feel a sense of contributing to society by following precautions (OR = 1.80) and receive support from family and others (emotional support: OR = 2.01, financial support: OR = 2.04). Interestingly, no significant differences were found in students' feelings associated with online or virtual learning [t(526.08) = 0.42, p = 0.68]. Students with disabilities, though, trended toward reporting negative experiences with virtual learning. In conclusion, students with disabilities were disproportionately affected by COVID-19 stressors, but also expressed more support and a sense of contributing to the common good.

Magnetism and Luminescence of a MOF with Linear Mn3 Nodes Derived from an Emissive Terthiophene-Based Imidazole Linker.

A new terthiophene-based imidazole luminophore 5,5'-(1H-thieno[3,4-d]imidazole-4,6-diyl)bis(thiophene-2-carboxylic acid) (TIBTCH2, 5) was synthesized in one step from previously reported 4,6-di(thiophen-2-yl)-1H-thieno[3,4-d]imidazole (DTTI, 4), and their photophysical properties were studied and compared accordingly. Under solvothermal conditions, reacting 5 with Mn(OAc)2 yielded a new three-dimensional metal-organic framework (MOF, 6) which was structurally defined by single-crystal X-ray diffraction. In 6, all Mn(II) ions octahedrally bind to carboxylate-O atoms to form a linear Mn3 secondary building unit (SBU) that contains three distinct coordination modes. Importantly, 6 exhibits dual functional properties of ligand-based emission and metal-based magnetic behaviors.

Somatic Mutations and the Risk of Undifferentiated Autoinflammatory Disease in MDS: An Under-Recognized but Prognostically Important Complication.

Objectives: We theorized that myelodysplastic syndrome (MDS) with somatic mutations and karyotype abnormalities are associated with autoinflammation, and that the presence of autoinflammatory disease affected prognosis in MDS. Methods: One hundred thirty-four MDS patients were assessed for the prevalence of autoinflammatory complications and its link with karyotypes and somatic mutation status. Autoinflammatory complications were described either as well-defined autoinflammatory diseases (AD) or undifferentiated "autoinflammatory disease" (UAD) (defined as CRP over 10.0 mg/L on five consecutive occasions, taken at separate times and not explained by infection). Several patient characteristics including demographic, clinical, laboratory, cytogenetics charts, and outcomes, were compared between different groups. Results: Sixty-two (46.3%) patients had an autoinflammatory complication manifesting as arthralgia (43.5% vs. 23.6%, p = 0.0146), arthritis (30.6% vs. 15.3%, p = 0.0340), skin rash (27.4% vs. 12.5%, p = 0.0301), pleuritis (14.5% vs. 4.2%, p = 0.0371) and unexplained fever (27.4% vs. 0%, p < 0.0001). AD were found in 7.4% of MDS patients (with polymyalgia rheumatic being the most frequently one). Classical autoimmune diseases were found only in 4 MDS patients (3.0%). Transcription factor pathway mutations (RUNX1, BCOR, WTI, TP53) (OR 2.20 [95%CI 1.02-4.75], p = 0.0451) and abnormal karyotypes (OR 2.76 [95%CI 1.22-6.26], p = 0.0153) were associated with autoinflammatory complications. Acute leukaemic transformation was more frequent in MDS patients with autoinflammatory features than those without (27.4% vs. 9.7%, p = 0.0080). Conclusions: Autoinflammatory complications are common in MDS. Somatic mutations of transcription factor pathways and abnormal karyotypes are associated with greater risk of autoinflammatory complications, which are themselves linked to malignant transformation and a worse prognosis.

Antibacterial Thiamine inspired silver (I) and gold (I) N-heterocyclic carbene compounds.

Three new coinage metal carbene complexes of silver and gold were synthesized from a thiamine inspired proligand. The compounds were characterized by HRMS, NMR spectroscopy (1H, 19F, 31P and 13C), FT-IR and elemental analysis. The coordination environment around the metal centers was correlated to the diffusion coefficients obtained from DOSY-NMR experiments and was in agreement with the nuclearity observed in the solid-state by single crystal X-ray crystallography. The silver and gold carbene compounds were subjected to MIC studies against a panel of pathogenic bacteria, including multidrug resistant strains, with the gold carbene derivative showing the most potent antimicrobial activity against Gram-positive methicillin resistant Staphylococcus aureus (MRSA).

Construction of a High-Nuclearity Elliptical Yb(III) Nanoring: NIR Luminescent Response to Metal Ions and Nitro Explosives.

One 14-metal Yb(III) nanoring [Yb14(HL)2L20(DMF)8(H2O)8] (1) with a size of about 1.1 × 2.5 × 2.7 nm was synthesized from a tridentate ligand. Under the excitation of ligand absorption bands, 1 exhibits the NIR luminescence of Yb(III) and displays high luminescence sensitivity and selectivity to Co(II), Cu(II), and 2,4,6-trinitrophenol (PA) at the parts per million level. The KSV values of 1 to Co(II), Cu(II), and PA are 6.0 × 104 M-1, 3.8 × 104 M-1, and 6.9 × 104 M-1, respectively. 1 exhibits high luminescent sensitivity to PA even in the presence of other explosives.

Controlling the structures of organic semiconductor-quantum dot nanocomposites through ligand shell chemistry.

Nanocrystal quantum dots (QD) functionalised with active organic ligands hold significant promise as solar energy conversion materials, capable of multiexcitonic processes that could improve the efficiencies of single-junction photovoltaic devices. Small-angle X-ray and neutron scattering (SAXS and SANS) were used to characterize the structure of lead sulphide QDs post ligand-exchange with model acene-carboxylic acid ligands (benzoic acid, hydrocinnamic acid and naphthoic acid). Results demonstrate that hydrocinnamic acid and naphthoic acid ligated QDs form monolayer ligand shells, whilst benzoic acid ligated QDs possess ligand shells thicker than a monolayer. Further, the formation of a range of nanocomposite materials through the self-assembly of such acene-ligated QDs with an organic small-molecule semiconductor [5,12-bis((triisopropylsilyl)ethynyl)tetracene (TIPS-Tc)] is investigated. These materials are representative of a wider set of functional solar energy materials; here the focus is on structural studies, and their optoelectronic function is not investigated. As TIPS-Tc concentrations are increased, approaching the solubility limit, SANS data show that QD fractal-like features form, with structures possibly consistent with a diffusion limited aggregation mechanism. These, it is likely, act as heterogeneous nucleation agents for TIPS-Tc crystallization, generating agglomerates containing both QDs and TIPS-Tc. Within the TIPS-Tc crystals there seem to be three distinct QD morphologies: (i) at the crystallite centre (fractal-like QD aggregates acting as nucleating agents), (ii) trapped within the growing crystallite (giving rise to QD features ordered as sticky hard spheres), and (iii) a population of aggregate QDs at the periphery of the crystalline interface that were expelled from the growing TIPS-Tc crystal. Exposure of the QD:TIPS-Tc crystals to DMF vapour, a solvent known to be able to strip ligands from QDs, alters the spacing between PbS-hydrocinnamic acid and PbS-naphthoic acid ligated QD aggregate features. In contrast, for PbS-benzoic acid ligated QDs, DMF vapour exposure promotes the formation of ordered QD colloidal crystal type phases. This work thus demonstrates how different QD ligand chemistries control the interactions between QDs and an organic small molecule, leading to widely differing self-assembly processes. It highlights the unique capabilities of multiscale X-ray and neutron scattering in characterising such composite materials.

Construction of 14-metal lanthanide nanorings with NIR luminescence response to ions.

Two 14-metal lanthanide nanorings [Ln14(HL)2L20(DMF)8(H2O)8] (Ln = Nd(1) and Gd(2)) were constructed from a tridentate ligand. 1 displays NIR luminescence sensing properties towards metal cations and anions, especially Cu2+, Co2+, H2PO4- and F- at a ppm level.

Construction of Chiral "Triple-Decker" Nd(III) Nanocluster with High NIR Luminescence Sensitivity toward Co(II).

One Nd(III) complex [Nd3L3(OAc)3] (1) was synthesized from a conjugate Schiff base ligand H2L. It shows a chiral "triple-decker" structure (1.1 × 1.2 × 1.8 nm) with Nd(III) ions sandwiched between the Schiff base ligands. 1 exhibits NIR Nd(III) luminescence, and the LMET efficiency is calculated to be 13.8%. It displays high luminescence sensitivity and selectivity to Co(II). The KSV value and LOD of 1 to Co(II) are 9.96 × 104 M-1 and 0.97 µM, respectively.

X-ray nano-tomography of complete scales from the ultra-white beetles Lepidiota stigma and Cyphochilus.

High resolution X-ray nano-tomography experiments are often limited to a few tens of micrometer size volumes due to detector size. It is possible, through the use of multiple overlapping tomography scans, to produce a large area scan which can encompass a sample in its entirety. Mounting and positioning regions to be scanned is highly challenging and normally requires focused ion beam approaches. In this work we have imaged intact beetle scale cells mounted on the tip of a needle using a micromanipulator stage. Here we show X-ray holotomography data for single ultra-white scales from the beetles Lepidiota stigma (L. stigma) and Cyphochilus which exhibit the most effective scattering of white light in the literature. The final thresholded matrices represent a scan area of 25 × 70 × 362.5 µm and 25 × 67.5 × 235µm while maintaining a pixel resolution of 25 nm. This tomographic approach allowed the internal structure of the scales to be captured completely intact and undistorted by the sectioning required for traditional microscopy techniques.

Electropolymerizable N-heterocyclic carbene complexes of Rh and Ir with enantiotropic polymorphic phases.

New Rh (1) and Ir (2) complexes of an N-heterocyclic carbene (NHC) featuring a terthiophene backbone were synthesized. Single crystal X-ray diffraction studies of 1 and 2 at 100 K and 298 K respectively, revealed two enantiotropic polymorphic phases with similar lattice parameters for each compound. The transition temperature between two crystalline forms for each compound was determined by measuring the percentage of reflections with a different space group ranging from 100 K to 298 K. Both 1 and 2 were also found to catalyze the hydrogen transfer reaction. The conducting metallopolymers poly-1 and poly-2 were synthesized from oxidative electropolymerization of 1 and 2, respectively, in CH2Cl2 electrolyte solution on indium tin oxide-(ITO) coated glass. The electrochromic properties of synthesized conducting metallopolymers were studied by UV-vis-NIR spectroelectrochemistry.

A 42-metal Yb(iii) nanowheel with NIR luminescent response to anions.

One Yb42 nanowheel [Yb42L14(OH)28(OAc)84] was constructed using a tridentate vanillin ligand. The external diameter of the wheel-like structure is about 3.6 nm, which allows direct visualization by TEM. It shows interesting NIR lanthanide luminescence sensing towards anions, especially to fluoride at the ppm level.