ABSTRACT
Chirality-induced spin selectivity observed in chiral 2D organic-inorganic hybrid perovskite holds promise to achieve spin-dependent electrochemistry. However, conventional chiral 2D perovskites suffer from low conductivity and hygroscopicity, limiting electrochemical performance and operational stability. Here, a cutting-edge material design is introduced to develop a stable and efficient chiral perovskite-based spin polarizer by employing fluorinated chiral cation. The fluorination approach effectively promotes the charge carrier transport along the out-of-plane direction by mitigating the dielectric confinement effect within the multi-quantum well-structured 2D perovskite. Integrating the fluorinated cation incorporated spin polarizer with BiVO4 photoanode considerably boosts the photocurrent density while reducing overpotential through a spin-dependent oxygen evolution reaction. Furthermore, the hydrophobic nature of fluorine in spin polarizer endows operational stability to the photoanode, extending the durability by 280% as compared to the device with non-fluorinated spin polarizer.
ABSTRACT
Background Velopharyngeal insufficiency (VPI) is a major complication of cleft palate repair. The purpose of this study was to evaluate the incidence and predictive factors of VPI after cleft palate repair based on 27 years of one surgeon's experience. Methods Medical records were retrospectively reviewed for 652 patients who underwent cleft palate repair between 1995 and 2021. After exclusion of those with other syndromes or developmental disorders, the study included 374 patients with sufficient follow-up until the age of 4 years, when language evaluation was possible. VPI status was categorized through subjective and objective tests into normal, VPI, and borderline. We analyzed potential differences in VPI incidence by multiple factors. Factors with significance were analyzed to confirm the relationships between subvariables. Results Of the 374 patients, 311 (83.2%) exhibited normal pronunciation, 51 (13.6%) had VPI, and 12 (3.2%) were borderline. Primary cleft palate repair performed after 18 months was associated with a higher incidence of VPI than repair conducted before 18 months ( p = 0.005). The incidence of VPI was higher in cases of submucous cleft palate than in the other types based on the Veau classification ( p = 0.011). However, in the multivariable analysis, only the submucous type showed statistically significant results ( p = 0.026). Conclusion A total of 374 people underwent primary cleft palate repair, and 13.6% of those with VPI required secondary therapy. The incidence of VPI was relatively high among patients with primary cleft palate repair after 18 months and patients with submucous cleft palate.
ABSTRACT
BACKGROUND: The rising incidence of dialysis-dependent end-stage renal disease (ESRD) has underscored the need for collaboration between plastic surgeons and nephrologists, particularly concerning preoperative and postoperative management for facial reconstruction. This collaboration is essential due to a scarcity of comprehensive information in this domain. METHODS: A study initiated in January 2015 involved 10 ESRD cases on dialysis undergoing Mohs micrographic surgery for facial skin cancer, followed by reconstructive surgery under general anesthesia. To ensure surgical safety, rigorous measures were enacted, encompassing laboratory testing, nephrology consultations, and preoperative dialysis admission. Throughout surgery, meticulous control was exercised over vital signs, electrolytes, bleeding risk, and pain management (excluding nonsteroidal anti-inflammatory drugs). Postoperative assessments included monitoring flap integrity, hematoma formation, infection, and cardiovascular risk through plasma creatinine levels. RESULTS: Adherence to the proposed guidelines yielded a notable absence of postoperative wound complications. Postoperative plasma creatinine levels exhibited an average decrease of 1.10 mg/dL compared to preoperative levels, indicating improved renal function. Importantly, no cardiopulmonary complications or 30-day mortality were observed. In ESRD patients, creatinine levels decreased significantly postoperatively compared to the preoperative levels (p< 0.05), indicating favorable outcomes. CONCLUSION: The consistent application of guidelines for admission, anesthesia, and surgery yielded robust and stable outcomes across all patients. In particular, the findings support the importance of adjusting dialysis schedules. Despite the limited sample size in this study, these findings underscore the effectiveness of a collaborative and meticulous approach for plastic surgeons performing surgery on dialysis-dependent patients, ensuring successful outcomes.
ABSTRACT
Background: The commercially available design of a three-dimensional (3D)-printed titanium (3D-Ti) cage can be divided into two types according to the presence of a window: a cage with a window that allows filling of bone graft materials and a non-window cage for stand-alone use. This prospective observational case series study aimed to explore the clinical feasibility of using a non-window type 3D-Ti cage in cases of combined window and non-window cage implantation. Furthermore, we evaluated the bone in growth patterns of non-window cages and their correlation with published fusion grading systems. Methods: A total of 31 consecutive patients who underwent single-level posterior lumbar interbody fusion surgery were included. Two 3D-Ti cages with different designs were inserted: a non-window cage on the left side and a window cage on the right side. Radiographic fusion was defined by the segmental angle between flexion and extension radiographs (F-E angle) and cage bridging bone (CBB) scores on computed tomography. The association between the F-E angle and osteointegration scoring system including the surface osteointegration ratio (SOR) score was analyzed. Results: Radiographic fusion was achieved in 27 of 31 patients (87%) at 12 months postoperatively. Among the non-window cages, 23 of 31 (74.2%) had fair SOR scores, while 19 of 31 (61.3%) window cages had fair intra-cage CBB scores. The higher the SOR score was, the smaller the flexion-extension angle (SOR 0 vs. SOR 1: 6.30° ± 2.43° vs. 1.95° ± 0.99°, p < 0.001; SOR 0 vs. SOR 2: 6.03° ± 2.43° vs. 0.99°± 0.74°, p < 0.001). Conclusions: The clinical feasibility of using a non-window 3D-Ti cage during lumbar interbody fusion might be acceptable. Furthermore, a newly suggested fusion criterion for the use of the non-window cage, the SOR score, showed a significant association with the published fusion grading systems, demonstrating its feasibility in determining interbody fusion in lumbar spinal surgery.
Subject(s)
Spinal Fusion , Titanium , Humans , Porosity , Pilot Projects , Feasibility Studies , Prostheses and Implants , Spinal Fusion/methods , Lumbar Vertebrae/diagnostic imaging , Lumbar Vertebrae/surgery , Treatment OutcomeABSTRACT
Nitrogen-doped carbon dots (CDs) have attracted considerable attention across various research areas and applications due to their enhanced optical properties and photostability. However, the mechanism of nitrogen incorporation in CDs remains elusive, hampering the precise control over nitrogen-incorporated structures and the investigation of the effects of nitrogen on the electronic structure and optical properties of CDs. In this study, we employed a rational design approach, utilizing glucosamine and ethylene glycol as the carbon source and co-reagent, respectively, to synthesize N-doped CDs. Our synthesis strategy involved pinacol rearrangement and iminium ion cyclization reactions, enabling the reliable formation of N-doped CDs. Notably, the resulting CDs exhibited distinctive emissive states attributed to heteroatomic defect structures, including oxygenic and nitrogenic polycyclic aromatic hydrocarbons. To gain further insights into their energy levels and electronic transitions, we conducted comprehensive investigations, employing extended Hückel calculations and pump-probe spectroscopy. The synthesized CDs displayed great promise as bioimaging and photodynamic therapy agents, highlighting their potential for biomedical applications. Moreover, our study significantly contributes valuable insights into the rational design of N-doped CDs with controllable chemical and electronic structures, thereby paving the way for advancements in their diverse range of applications.
ABSTRACT
Background Squamous cell carcinoma (SCC) is the most common malignancy on the lower lip. Surgical excision, the standard treatment for SCC, requires full-thickness excision. However, no consensus exists about the appropriate surgical margin. Therefore, we investigated the appropriate surgical margin and excision technique by analyzing 23 years of surgical experience with lower-lip SCC. Methods We reviewed 44 patients with lower-lip SCC who underwent surgery from November 1997 to October 2020. Frozen biopsy was performed with an appropriate margin on the left and right sides of the lesion, and the margin below the lesion was the skin above the sulcus boundary. If the frozen biopsy result was positive, an additional session was performed to secure a negative margin. Full-thickness excision was performed until the final negative margin. In each patient, the total number of sessions performed, final surgical margin, and recurrence were analyzed. Results Forty-one cases ended in the first session, 2 ended in the second session, and 1 ended in the third session. The final surgical margins (left and right; n = 88) were 5 mm (66%), 7 mm (9%), 8 mm (2.3%), 10 mm (20.4%), and 15 mm (2.3%). During an average follow-up of 67.4 months (range, 12-227 months), recurrence occurred in one patient. Conclusion The final surgical margin was 5 mm in 66% (58/88) of the cases, and 97.7% (86/88) were within 10 mm. Therefore, we set the first frozen biopsy margin to 5 mm, and we suggest that a 5-mm additional excision is appropriate when frozen biopsy results are positive.
ABSTRACT
We investigate the dynamics of surface plasmon (SP) lasing in Au gratings fabricated on InGaAs with a period of around 400â nm, which locates the SP resonance near the semiconductor energy gap and facilitates efficient energy transfer. By optically pumping the InGaAs to reach the population inversion required for the amplification and the lasing, we observe SP lasing at specific wavelengths that satisfy the SPR condition depending on the grating period. The carrier dynamics in semiconductor and the photon density in the SP cavity was investigated from the time-resolved pump-probe measurement and the time resolved photoluminescence spectroscopy, respectively. Our results reveal that the photon dynamics is strongly correlated with the carrier dynamics and the lasing build-up is accelerated as the initial gain proportional to the pumping power increases, and this trend is satisfactorily explained using the rate equation model.
ABSTRACT
STUDY DESIGN: Retrospective observational study. PURPOSE: This study aimed to investigate the impact of plating on postoperative serial segmental motion and its correlation with clinical outcomes in single-level anterior cervical discectomy and fusion (ACDF) for up to 1 year. OVERVIEW OF LITERATURE: The advantages and disadvantages of using cervical plating in ACDF have been well discussed; however, few studies compared the early serial segmental motions at the postoperative level between plating and non-plating. METHODS: In retrospectively collected data, 149 patients who underwent single-level ACDF for degenerative disease were enrolled and divided into non-plating (n=66) and plating (n=83). Interspinous motion (ISM) at the arthrodesis segment, Numeric Rating Scale (NRS) for neck pain, and Neck Disability Index (NDI) were serially evaluated at 3, 6, and 12 months postoperatively. Predictable factors for fusion, including age, sex, plating, diabetes, smoking, and type of grafts, were investigated, and fusion was defined as ISM <1 mm. RESULTS: In both groups, ISM was the highest at 3 months and gradually decreased thereafter, and the plating group showed significantly lower serial ISM than the non-plating group at 12 months. The plating group had lower NRS and NDI scores than the nonplating group at 12 months, and the difference in the NRS scores was statistically significant, particularly at 3 and 6 months, although that of the NDI scores was not. In a multivariate analysis, plating was the most powerful predictor for fusion. CONCLUSIONS: Plating significantly decreases the serial ISM compared with non-plating in single-level ACDF, and such decreased motion is correlated with decreased neck pain until 12 months postoperatively, particularly at 3 and 6 months. Given that plating was the most predictive factor for fusion, we recommend plating even in single-level ACDF for better early clinical outcomes.
ABSTRACT
STUDY DESIGN: Prospective observational study. OBJECTIVES: We aimed to analysis the distributional patterns of the intra- and extra-cage bridging bone (InCBB and ExCBB) and the significance of ExCBB using suggested lumbar interbody fusion criterion. METHODS: This study included the patients with planned single-level transforaminal lumbar interbody fusion. We divided bridging bone into InCBB (in void of right or left cage) and ExCBB (outside of cages; anterior, posterior, intermediate, right, or left) and graded bridging scores from 0 to 2 on postoperative 1-year computed tomography. The fusion was defined as at least having one or more graded 2 and the evaluation were conducted twice by 2 raters. RESULTS: Sixty-five patients were enrolled. All values of intra- and inter-rater reliability in left InCBB, anterior, and posterior ExCBB showed good agreements (≥0.75). Both InCBBs showed similar mean bridging scores (Rt:1.43 vs Lt:1.48), and in ExCBBs, the anterior was the highest (1.43), followed by the posterior (1.14); the right and left were the lowest (0.49 and 0.52 respectively). In subjects determined as fusion (85.4%), complete bridging was observed more in ExCBB (88.8%) than in InCBB (69.9%). CONCLUSIONS: Given the higher bridging scores in both InCBBs and Ant. ExCBB, bone grafting is important promoting factor to increase the interbody bridging bone regardless of outside or in void of cages. Based on our suggested criterion, ExCBB has a greater proportion compared to InCBBs for determining the fusion and extra-cage bone grafting should be considered as important procedures for interbody fusion.
ABSTRACT
Despite its high incidence rate, vertebral fragility fracture (VFF) is frequently underdiagnosed due to the absence of marked symptoms. This study evaluated the diagnostic accuracy of our suggested physical examinations and compared them with that of plain radiographs. Patients over 65 years of age with sudden back pain within the preceding 3 weeks were enrolled. Physical examinations in three different positions and a closed-fist percussion test were performed, and the presence of VFF was evaluated through confirmatory radiographic tools. We assessed the diagnostic accuracy of each physical examination and compared them with the interpretation of plain radiographs and examined the patient-reported pain locations based on the VFF level. A total of 179 patients were enrolled. The forward bending in supine (FB-SU) test demonstrated superior diagnostic values (sensitivity: 90.6%, specificity: 71.2%), which outperformed those of plain radiographs (sensitivity: 68.9%, specificity: 71.9%). The location of patient-reported pain was generally close to or lower than the index fracture level. FB-SU showed the highest diagnostic accuracy and was more valuable than plain radiographs in diagnosing acute VFF. FB-SU is a simple and affordable screening test. If positive, physicians should highly suspect VFF even when based on vague evidence of acute fracture provided by plain radiographs.
ABSTRACT
PURPOSE: To determine whether arthroscopic transosseous foveal repair of the triangular fibrocartilage complex (TFCC) results in significant and clinically relevant improvement in clinical outcomes including pain and function with low complication and reoperation rates. METHODS: We reviewed studies investigating the clinical outcomes of arthroscopic transosseous foveal repair of the TFCC through MEDLINE, Embase, and the Cochrane Library. Studies on TFCC repair performed with an open or capsular technique and combined with other procedures, such as ulnar shortening osteotomy and a wafer procedure, were excluded. Methodologic quality was assessed using the Methodological Index for Non-randomized Studies score. Clinical outcomes were assessed using range of motion, grip strength, and patient-reported outcomes. Clinically relevant improvement was determined using the minimal clinically important difference (MCID). RESULTS: A total of 443 unique studies were identified, of which 7 (131 patients) met the inclusion criteria. The mean age ranged from 27 to 37 years, and the mean follow-up period ranged from 23.5 to 31.1 months. The grip strength (as a percentage) increased after foveal repair of the TFCC in all studies (mean difference range, 11.8% to 22.3%). All studies also reported an improvement in the visual analog scale score (mean difference range, -9.8 to -1.88); Modified Mayo Wrist Score (mean difference range, 10.5 to 27); and Disabilities of the Arm, Shoulder and Hand score (mean difference range, -51.8 to -24.48). Considering clinically relevant improvements based on the MCID, 4 of 5 studies reporting the visual analog scale score showed improvements in this score (MCID, 2) and all studies reporting the Disabilities of the Arm, Shoulder and Hand score showed improvements in this score (MCID, 10). Most complications recovered without any treatment, and 3 patients (2.29%) needed a reoperation. CONCLUSIONS: Arthroscopic transosseous foveal repair of the TFCC resulted in improvements in grip strength and functional outcomes with low complication and reoperation rates. However, the evidence for which technique produces better clinical outcomes remains limited. LEVEL OF EVIDENCE: Level IV, systematic review of Level III and IV studies.
Subject(s)
Arthroscopy , Triangular Fibrocartilage/surgery , Adolescent , Adult , Arthroscopy/adverse effects , Female , Humans , Male , Middle Aged , Patient Reported Outcome Measures , Postoperative Complications/etiology , Retrospective Studies , Treatment Outcome , Young AdultABSTRACT
BACKGROUND: Alarm services in the Order Communication System improve awareness for related physicians including orthopaedic surgeons, internal medicine doctors, and other relevent doctors. This prospective observational multicenter study was to compare the diagnostic and treatment rates of osteoporosis between an alarm service group and a no alarm service group. METHODS: From January 2017 to december 2017, The subjects included patients aged 50 years or older with hip fractures from 16 hospital-based multicenter cohorts. Among the 16 hospitals, 5 university hospitals established an alarm service for osteoporosis management (i.e., Alarm group) and 11 university hospitals did not set-up alarm services (i.e., Control group). The rate of dual energy X-ray absorptiometry (DXA) test and the initiation rate of antiosteoporosis medications between the 2 groups were compared at enrollment and at 6 months follow-up. RESULTS: During the study period, 1,405 patients were enrolled. The DXA examination rate and initiation rate of osteoporosis treatment between the Alarm group and the Control group were 484 patients (89.8%) vs. 642 patients (74.1%) (P<0.001) and 355 patients (65.9%) versus 294 patients (33.9%) (P<0.001), respectively. At 6 months follow-up, the rate of anti-osteoporosis management between the 2 groups decreased (57.8% vs. 29.4%). CONCLUSIONS: This prospective multicenter study demonstrates that alarm services can improve awareness of physicians, and it resulted in a significantly higher rate of examination of DXA and initiation of anti-osteoporosis medication in the Alram group. Therefore, alarm service is a simple and effective tool to increase anti-osteoporosis management as part of the fractuure liaison service in South Korea.
ABSTRACT
Stimuli-responsive anisotropic microstructures and nanostructures with different physicochemical properties in discrete compartments, have been developed as advanced materials for drug delivery systems, tissue engineering, regenerative medicine, and biosensing applications. Moreover, their stimuli-triggered actuations would be of great interest for the introduction of the functionality of drug delivery reservoirs and tissue engineering scaffolds. In this study, stimuli-responsive bicompartmental nanofibers (BCNFs), with completely different polymer compositions, were prepared through electrohydrodynamic co-jetting with side-by-side needle geometry. One compartment with thermo-responsiveness was composed of methacrylated poly(N-isopropylacrylamide-co-allylamine hydrochloride) (poly(NIPAM-co-AAh)), while the counter compartment was made of poly(ethylene glycol) dimethacrylates (PEGDMA). Both methacrylated poly(NIPAM-co-AAh) and PEGDMA in distinct compartments were chemically crosslinked in a solid phase by UV irradiation and swelled under aqueous conditions, because of the hydrophilicity of both poly(NIPAM-co-AAh) and PEGDMA. As the temperature increased, BCNFs maintained a clear interface between compartments and showed thermally-induced actuation at the nanoscale due to the collapsed poly(NIPAM-co-AAh) compartment under the PEGDMA compartment of identical dimensions. Different model drugs, bovine serum albumin, and dexamethasone phosphate were alternately loaded into each compartment and released at different rates depending on the temperature and molecular weight of the drugs. These BCNFs, as intelligent nanomaterials, have great potential as tissue engineering scaffolds and multi-modal drug delivery reservoirs with stimuli-triggered actuation and decoupled drug release.
ABSTRACT
Human anisakiasis is a disease caused by an infestation of the third stage larvae of family anisakidae. The ingested larvae invade the gastrointestinal wall, causing clinical symptoms that include abdomen pain, nausea, and vomiting. Although enteric anisakiasis is extremely rare, it can induce intestinal obstruction. We report a case in which emergency surgery was needed due to intestinal obstruction that coincided with symptoms related to anisakiasis, along with a brief literature review.
Subject(s)
Anisakiasis/diagnosis , Intestinal Obstruction/diagnosis , Adult , Animals , Anisakiasis/complications , Anisakis/isolation & purification , Diagnosis, Differential , Humans , Intestinal Obstruction/etiology , Intestinal Obstruction/surgery , Jejunum/diagnostic imaging , Jejunum/pathology , Male , Tomography, X-Ray ComputedABSTRACT
Stimuli-responsive, polymer-based nanostructures with anisotropic compartments are of great interest as advanced materials because they are capable of switching their shape via environmentally-triggered conformational changes, while maintaining discrete compartments. In this study, a new class of stimuli-responsive, anisotropic nanofiber scaffolds with physically and chemically distinct compartments was prepared via electrohydrodynamic cojetting with side-by-side needle geometry. These nanofibers have a thermally responsive, physically-crosslinked compartment, and a chemically-crosslinked compartment at the nanoscale. The thermally responsive compartment is composed of physically crosslinkable poly(N-isopropylacrylamide) poly(NIPAM) copolymers, and poly(NIPAM-co-stearyl acrylate) poly(NIPAM-co-SA), while the thermally-unresponsive compartment is composed of polyethylene glycol dimethacrylates. The two distinct compartments were physically crosslinked by the hydrophobic interaction of the stearyl chains of poly(NIPAM-co-SA) or chemically stabilized via ultraviolet irradiation, and were swollen in physiologically relevant buffers due to their hydrophilic polymer networks. Bicompartmental nanofibers with the physically-crosslinked network of the poly(NIPAM-co-SA) compartment showed a thermally-triggered shape change due to thermally-induced aggregation of poly(NIPAM-co-SA). Furthermore, when bovine serum albumin and dexamethasone phosphate were separately loaded into each compartment, the bicompartmental nanofibers with anisotropic actuation exhibited decoupled, controlled release profiles of both drugs in response to a temperature. A new class of multicompartmental nanofibers could be useful for advanced nanofiber scaffolds with two or more drugs released with different kinetics in response to environmental stimuli.
Subject(s)
Drug Delivery Systems/instrumentation , Nanofibers/chemistry , Nanofibers/ultrastructure , Nanotechnology/methods , Animals , Anisotropy , Cattle , Dexamethasone/analogs & derivatives , Dexamethasone/chemistry , Dexamethasone/pharmacokinetics , Polymers/chemistry , Serum Albumin, Bovine/chemistry , Serum Albumin, Bovine/pharmacokinetics , TemperatureABSTRACT
Anisotropic microarchitectures with different physicochemical properties have been developed as advanced materials for challenging industrial and biomedical applications including switchable displays, multiplexed biosensors and bioassays, spatially-controlled drug delivery systems, and tissue engineering scaffolds. In this study, anisotropic biohybrid microparticles (MPs) spatio-selectively conjugated with two different antibodies (Abs) are first developed for fluorescence-based, multiplexed sensing of biological molecules. Poly(acrylamide-co-acrylic acid) is chemically modified with maleimide- or acetylene groups to introduce different targeting biological moieties into each compartment of anisotropic MPs. Modified polymer solutions containing two different fluorescent dyes are separately used for electrohydrodynamic co-jetting with side-by-side needle geometry. The anisotropic MPs are chemically stabilized by thermal imidization, followed by bioconjugation of two different sets of polyclonal Abs with two individual compartments via maleimide-thiol coupling reaction and Huisgen 1,3-dipolar cycloaddition. Finally, two compartments of the anisotropic biohybrid MPs are spatio-selectively associated with the respective monoclonal Ab-immobilized substrate in the presence of the antigen by sandwich-type immunocomplex formation, resulting in their ordered orientation due to the spatio-specific molecular interaction, as confirmed by confocal laser scanning microscopy. In conclusion, anisotropic biohybrid MPs capable of directional binding have great potential as a new fluorescence-based multiplexing biosensing system.
Subject(s)
Biosensing Techniques , Microspheres , Drug Delivery Systems , Particle Size , Tissue ScaffoldsABSTRACT
A new class of biohybrid nanoprobes has been developed for surface-enhanced Raman scattering-based bioimaging. Silver nanoparticle clusters were encapsulated in polymeric nanoparticles using electrohydrodynamic jetting, followed by stabilization and bioconjugation. Controlled SERS intensity with high sensitivity, chemical stability, and biocompatibility makes the SERS biohybrid nanoprobes useful for bioimaging.
Subject(s)
Metal Nanoparticles , Molecular Imaging/methods , Molecular Probes/chemistry , Silver/chemistry , Spectrum Analysis, Raman , Biomarkers/metabolism , Cell Line, Tumor , Humans , Hydrodynamics , Models, Molecular , Molecular ConformationABSTRACT
BACKGROUND/AIMS: The aim of this study was to identify changes in left ventricular (LV) performance in patients with a myocardial bridge (MB) in the left anterior descending coronary artery during resting and in an inotropic state. METHODS: Myocardial strain measurement by speckle-tracking echocardiography and conventional LV wall-motion scoring was performed in 18 patients with MB (mean age, 48.1 ± 1.7 years, eight female) during resting and intravenous dobutamine challenge (10 and 20 µg/kg/min). RESULTS: Conventional LV wall-motion scoring was normal in all patients during resting and in an inotropic state. Peak regional circumferential strain increased dose dependently upon dobutamine challenge. Longitudinal strains of the anterior and anteroseptal segments were, however, reduced at 20 µg/kg/min and showed a dyssynchronous pattern at 20 µg/kg/min. Although there were no significant differences in radial strain and displacement of all segments at rest compared with under 10 µg/kg/min challenge, radial strain and displacement of anterior segments at 20 µg/kg/min were significantly reduced compared with posterior segments at the papillary muscle level (44.8 ± 14.9% vs. 78.4 ± 20.1% and 5.3 ± 2.3 mm vs. 8.5 ± 1.8 mm, respectively; all p < 0.001), and showed plateau (40%) or biphasic (62%) patterns. CONCLUSIONS: Reduced LV strain of patients with MB after inotropic stimulation was identified. Speckle-tracking strain echocardiography identified a LV myocardial dyssynchrony that was not demonstrated by conventional echocardiography in patients with MB.
Subject(s)
Adrenergic beta-1 Receptor Agonists , Dobutamine , Echocardiography, Stress/methods , Myocardial Contraction , Myocardium , Ventricular Dysfunction, Left , Ventricular Function, Left/drug effects , Adult , Aged , Chest Pain , Coronary Angiography , Diastole , Echocardiography, Stress/instrumentation , Female , Humans , Male , Middle Aged , Physical Exertion , SystoleABSTRACT
Cholesterol granuloma is a histological term used for the description of a tissue response to a foreign body such as cholesterol crystals. Cholesterol granuloma is histologically characterized as fibrous granulation tissue containing cholesterol crystals within surrounding giant cells. Cases of cholesterol granuloma of the pancreas are very rare. We report a case of a 47-year old male who had a cholesterol granuloma of the pancreas. Abdominal CT showed 24 mm-sized cyst in the pancreas and peri-pancreatic regional mass infiltrating to the stomach. PET-CT revealed increased 18F-FDG uptake at the cyst and peri-pancreatic mass. Thus, Whipple's operation was done. The disease was confirmed by surgical pathologic examination of the tissue. Pathologic examination of resected specimen showed numerous cholesterol crystals surrounded by multinucleated foreign body giant cells. We report on this case and give a brief review of the literature.
Subject(s)
Cholesterol , Granuloma, Foreign-Body/pathology , Diagnosis, Differential , Fluorodeoxyglucose F18/chemistry , Granuloma, Foreign-Body/diagnostic imaging , Granuloma, Foreign-Body/surgery , Humans , Male , Middle Aged , Pancreas/pathology , Positron-Emission Tomography , Tomography, X-Ray ComputedABSTRACT
BACKGROUND: Liposuction provides further reduction of axillary sweating and malodor when combined with dermal curettage with sharp rasping cannulas. This aggressive approach is associated with relatively higher rate of hematoma formation when compared to the conventional simple liposuction. OBJECTIVE: The aim of this prospective, randomized, controlled trial was to evaluate the effect of quilting sutures on the incidence of hematoma formation after liposuction-curettage for treatment of axillary hyperhidrosis (AH). MATERIALS AND METHODS: The trial randomized 59 male patients (118 axillae) undergoing liposuction-curettage for AH to quilting procedures (61 axillae) or control group (57 axillae) for intention-to-treat analysis. Outcome measures included the incidence of hematoma formation, operative time, degree of postoperative pain, and amount of analgesics consumption. RESULTS: Quilting sutures significantly reduced the incidence of axillary hematoma from 28.1% to 4.9%. Quilting was associated with the lengthening of operative time but did not affect the postoperative pain. CONCLUSION: Considering its efficacy in reducing postoperative hematoma, quilting is recommended in combination with aggressive liposuction-curettage procedure for treating AH and osmidrosis.