ABSTRACT
Measuring human body dimensions is critical for many engineering and product design domains. Nonetheless, acquiring body dimension data for populations using typical anthropometric methods poses challenges due to the time-consuming nature of manual methods. The measurement process for three-dimensional (3D) whole-body scanning can be much faster, but 3D scanning typically requires subjects to change into tight-fitting clothing, which increases time and cost and introduces privacy concerns. To address these and other issues in current anthropometry techniques, a measurement system was developed based on portable, low-cost depth cameras. Point-cloud data from the sensors are fit using a model-based method, Inscribed Fitting, which finds the most likely body shape in the statistical body shape space and providing accurate estimates of body characteristics. To evaluate the system, 144 young adults were measured manually and with two levels of military ensembles using the system. The results showed that the prediction accuracy for the clothed scans remained at a similar level to the accuracy for the minimally clad scans. This approach will enable rapid measurement of clothed populations with reduced time compared to manual and typical scan-based methods.
Subject(s)
Imaging, Three-Dimensional , Military Personnel , Young Adult , Humans , Imaging, Three-Dimensional/methods , Anthropometry/methods , Human Body , ClothingABSTRACT
Background: The lack of headforms that accurately reflect the head characteristics of Koreans and the demographic composition of the Korean population can lead to inadequate FFR testing and reduced effectiveness of FFRs. Method: Direct measurements of 5,110 individuals and 3D measurements of 2,044 individuals, aged between 9 and 69 years, were sampled from the data pool of Size Korea surveys based on the age and gender ratios of the Korean resident demographics. Seven head dimensions were selected based on the ISO 16976-2, availability of Size Korea measurements, and their relevance to the fit performance of FFRs. A principal component analysis (PCA) was performed using the direct measurements to extract the main factors explaining the head characteristics and then the main factors were standardized and remapped to 3D measurements, creating five size categories representing Korean head shapes. Lastly, representative 3D headforms were constructed by averaging five head shapes for each size category. Results: The study identified two main factors explaining Korean head characteristics by the PCA procedure specified in ISO 16976-2 and developed five representative headforms reflecting the anthropometric features of Korean heads: medium, small, large, short & wide, and long & narrow. Conclusion: This study developed representative headforms tailored to the Korean population for conducting total inward leakage (TIL) tests on filtering facepiece respirators (FFRs). The representative headforms can be used for TIL testing by employing robotic headforms to enhance the performance of FFRs for the Korean target population.
ABSTRACT
Numerous computer vision algorithms have been developed to automate posture analysis and enhance the efficiency and accuracy of ergonomic evaluations. However, the most effective algorithm for conducting ergonomic assessments remains uncertain. Therefore, the aim of this study was to identify the optimal camera position and monocular 3D pose model that would facilitate precise and efficient ergonomic evaluations. We evaluated and compared four currently available computer vision algorithms: Mediapipe BlazePose, VideoPose3D, 3D-pose-baseline, and PSTMO to determine the most suitable model for conducting ergonomic assessments. Based on the findings, the side camera position yielded the lowest Mean Absolute Error (MAE) across static, dynamic, and combined tasks. This positioning proved to be the most reliable for ergonomic assessments. Additionally, VP3D_FB demonstrated superior performance among evaluated models.Practitioner Summary: This study aimed to determine the most effective computer vision algorithm and camera position for precise and efficient ergonomic evaluations. Evaluating four algorithms, we found that the side camera position with VideoPose3D yielded the lowest Mean Absolute Error (MAE), ensuring precise and efficient evaluations.
ABSTRACT
The purpose of this study is to investigate the change in body dimensions over time in both Western (US) and Eastern (Korea) populations. In order to analyse the change of body dimension between the past and present and between western and eastern population, 13 body dimensions relating to automobile driver seat design were extracted from the ANSUR and Size Korea datasets at two time points, the past (ANSUR I: 1988, Size Korea: 1992) and the present (ANSUR II: 2012, Size Korea: 2012). Most of the dimensions differed significantly between past and present, as well as between the US and Korea. Overall, the data show an increasing trend of body dimensions over time for both genders. Based on the results, all countries should be encouraged to conduct periodic and national anthropometric research because body dimensions are continuously changing over time worldwide.Practitioner summary: This paper describes a study that investigates the changes in body dimensions over time in Western (US) and Eastern (Korean) populations. Findings indicate increasing trends in most dimensions for both populations, crucial for user-friendly product design and preventing hazards caused by faulty products.
Subject(s)
Asian People , Cross-Cultural Comparison , Humans , Male , Female , Anthropometry/methods , Korea , Republic of KoreaABSTRACT
The head tilt of patients with torticollis is usually evaluated subjectively in clinical practice and measuring it in young children is very limited due to poor cooperation. No study has yet evaluated the head tilt using a three-dimensional (3D) scan and compared it with other measurement methods. Therefore, this study aimed to objectively demonstrate head tilt through clinical measurements and a 3D scan in children with torticollis. A total of 52 children (30 males, 22 females; age 4.6 ± 3.2 years) diagnosed with torticollis and 52 adults (26 men, 26 women; age 34.42 ± 10.4 years) without torticollis participated in this study. The clinical measurements were performed using a goniometer and still photography methods. Additionally, the head tilt was analyzed using a 3D scanner (3dMD scan, 3dMD Inc., Atlanta, GA, USA). There was a high correlation between the other methods and 3D angles, and the cut-off value of the 3D angles for the diagnosis of torticollis was also presented. The area under the curve of the 3D angle was 0.872, which was confirmed by a moderately accurate test and showed a strong correlation compared with other conventional tests. Therefore, we suggest that measuring the degree of torticollis three-dimensionally is significant.
ABSTRACT
Single-photon-based head-mounted microscopy is widely used to record the brain activities of freely-moving animals. However, during data acquisition, the free movement of animals will cause shaking in the field of view, which deteriorates subsequent neural signal analyses. Existing motion correction methods applied to calcium imaging data either focus on offline analyses or lack sufficient accuracy in real-time processing for single-photon data. In this study, we proposed an open-source real-time motion correction (RTMC) plug-in for single-photon calcium imaging data acquisition. The RTMC plug-in is a real-time subpixel registration algorithm that can run GPUs in UCLA Miniscope data acquisition software. When used with the UCLA Miniscope, the RTMC algorithm satisfies real-time processing requirements in terms of speed, memory, and accuracy. We tested the RTMC algorithm by extending a manual neuron labeling function to extract calcium signals in a real experimental setting. The results demonstrated that the neural calcium dynamics and calcium events can be restored with high accuracy from the calcium data that were collected by the UCLA Miniscope system embedded with our RTMC plug-in. Our method could become an essential component in brain science research, where real-time brain activity is needed for closed-loop experiments.
Subject(s)
Calcium , Microscopy , Algorithms , Animals , Brain/diagnostic imaging , Brain/physiology , MotionABSTRACT
Although noninvasive ventilation (NIV) is administered to manage respiratory failure due to various causes, safety and effectiveness issues associated with the use of NIV masks have been reported. The present article aims to provide health professionals with a comprehensive review of the ergonomic considerations of NIV masks in terms of design, evaluation, and personalization. Based on a review of 93 papers, we provide guidelines for mask selection and troubleshooting during mask use as well as ergonomic approaches including face anthropometry, sizing systems, mask design, evaluation, and personalization. The comprehensive information presented in this review provides ergonomic perspectives to identify and prevent safety and usability problems associated with the use of NIV masks. Ergonomic improvement and personalization are important goals in order to facilitate the success of NIV treatment.
Subject(s)
Noninvasive Ventilation , Respiratory Insufficiency , Humans , Noninvasive Ventilation/adverse effects , Respiration, Artificial/adverse effects , Respiratory Insufficiency/therapy , Respiratory Insufficiency/etiology , Equipment DesignABSTRACT
With the development of calcium imaging, neuroscientists have been able to study neural activity with a higher spatial resolution. However, the real-time processing of calcium imaging is still a big challenge for future experiments and applications. Most neuroscientists have to process their imaging data offline due to the time-consuming of most existing calcium imaging analysis methods. We proposed a novel online neural signal processing framework for calcium imaging and established an Optical Brain-Computer Interface System (OBCIs) for decoding neural signals in real-time. We tested and evaluated this system by classifying the calcium signals obtained from the primary motor cortex of mice when the mice were performing a lever-pressing task. The performance of our online system could achieve above 80% in the average decoding accuracy. Our preliminary results show that the online neural processing framework could be applied to future closed-loop OBCIs studies.
Subject(s)
Brain-Computer Interfaces , Motor Cortex , Animals , Calcium , Mice , Online Systems , Signal Processing, Computer-AssistedABSTRACT
Smartphone hard key locations need to be ergonomically determined to improve grip stability and operational efficiency for users' convenience. The present study proposed an ergonomic design process that determines smartphone hard key locations by statistically analyzing the preferred hard key control areas of users with various hand sizes based on users' preferred grip postures and hard key control areas. The proposed design process analyzes the characteristics of product design, user, task, and use context, the types of preferred grip posture, the preference distribution of grip posture, and the preference distribution of hard-key area, and then recommends the locations of hard keys by considering the preference distribution of hard-key area and design constraints. The proposed design process was applied to a smartphone with a 5-inch screen, resulting in 77-96 mm from the bottom of the device for a volume key to 20 mm on the left side and 88-97 mm for a power key to 10 mm on the right side. The proposed design process for the determination of smartphone hard-key locations would be of use to determine the locations of various portable product interfaces.
Subject(s)
Ergonomics , Smartphone , Hand Strength , Humans , PostureABSTRACT
This study aimed to investigate transitions in patterns of post-traumatic stress disorder (PTSD) symptoms and psychological distress among South Koreans with traumatic experiences. This study consists of two parts: In Part 1 the time since trauma ranged between 0 and 41 years, while in Part 2 participants experienced at least one traumatic event within the previous three years. We identified subgroups and transitions between classes over a one-year period using latent profile analysis and latent transition analysis. First, in Part 1, four classes were identified at T1 and T2. Second, we explored whether age, sex, time since trauma, and time perspective (TP) predicted class membership at T1. Age, past-negative (PN), present-fatalistic, and future TPs were significant predictors of class membership at T1. Finally, sex, PN, and future TPs were identified as significant predictors of class transition over time. The same analysis was conducted in Part 2 with individuals chosen from the Part 1 participants. Differential effects of TP on class membership and transitions in PTSD symptoms and psychological distress indicated the need for intervention programs that consider the TP profiles of individuals with traumatic experiences.
Subject(s)
Psychological Distress , Stress Disorders, Post-Traumatic , Adult , Humans , Republic of Korea/epidemiology , Stress Disorders, Post-Traumatic/epidemiologyABSTRACT
Passive task-related (TR) fatigue caused by monotonous driving can negatively affect driving safety by impairing driver alertness and performance. This study aims to evaluate the effectiveness of a motion seat system on the driver's passive TR fatigue in terms of driving performance, physiological response, and subjective fatigue by using automotive and physiological sensors those applicable to on-road driving environment. Twenty drivers (5 females and 15 males; age = 38.5 ± 12.2) with more than two years of driving experience participated in an on-road experiment with two driving conditions: driving in the static seat condition during the first half of the driving session and then in the static (static-static, SS) or motion seat (static-motion, SM) condition during the second half. The SM condition showed significantly lower passive TR fatigue by 4.4~56.5% compared to the SS condition in terms of the standard deviation of velocity, percentage of eyelid closure rate (PERCLOS), and the ratio of low- to high-frequency power (LF/HF) of electrocardiography signals. The drivers rated significantly lower subjective state changes of overall fatigue, mental fatigue, passive TR fatigue, drowsiness, and decreased concentration in the SM condition than those in the SS condition. The findings of the study support the use of a motion seat system can be an effective countermeasure to reduce passive TR fatigue.
Subject(s)
Attention , Automobile Driving , Accidents, Traffic , Data Collection , Fatigue , Female , Humans , Male , Motion , Task Performance and Analysis , WakefulnessABSTRACT
The present study measured 25 dimensions of the ear including the concha and ear canal for ergonomic design of ear products and compared with existing ear measurement studies. Scanning and casting methods were employed to produce 3D ear images for 230 Koreans and 96 Caucasians and measurements of the ear dimensions were obtained by identifying 21 landmarks on individual ear scan image. The Korean ear measurements were found significantly larger (mean difference d¯ = 0.4-3.7 mm) and more varied (ratio of SDs =1.01-1.55) than those of Caucasians in most of ear dimensions. The average ear length and ear breadth of male were significantly longer ( d¯ = 1.3-7.0 mm) and wider ( d¯ = 0.8-3.0 mm) than those of female. Use of gender- and ethnicity-composite ear data is recommended in product design due to the much larger intra-population variations (7.5-22.2 mm) than the corresponding inter-population variations. Practitioner Summary: The 3D ear measurements of Koreans and Caucasians were collected and compared with those of different ethnic populations. The distinct ear features of the populations identified in this study are applicable to ergonomic design of ear products with better fit and comfort. Abbreviations: CCW: cavum concha width; CV: coefficient of variation; EB: ear breadth; EL: ear length; SD: standard deviation; SE: sampling error; 3D: 3 dimensional.
Subject(s)
Asian People , Ear/anatomy & histology , Imaging, Three-Dimensional , White People , Anthropometry/methods , Ear/diagnostic imaging , Female , Humans , Korea , Male , Sex CharacteristicsABSTRACT
Cadmium (Cd), an environmental and industrial pollutant, generates free radicals responsible for oxidative stress. Cd can also lead to various renal toxic damage such as the proximal tubules and glomerulus dysfunction. Plantamajoside (PMS), a major compound of Plantago asiatica (PA), was reported to have the antioxidant effects. In this study, we investigated the protective effects of PMS on Cd-induced renal damage in the NRK-52E cell and rat kidney tissue. Cd exposure increased the ROS generation, lipid peroxidation, serum biochemical values of renal damage, and mRNA and protein expressions of KIM-1 in vitro and in vivo. The significant reduction in glutathione (GSH)/glutathione disulfide (GSSG) ratio and activities of antioxidant enzymes were also observed in the rats treated with Cd. PMS significantly decreased the ROS generation and lipid peroxidation, thus enhancing GSH/GSSG ratio, antioxidant enzyme activities in the cells and rats, and improved histochemical appearances, indicating that PMS has protective activities against Cd-induced renal injury.
Subject(s)
Cadmium/toxicity , Catechols/therapeutic use , Environmental Pollutants/toxicity , Glucosides/therapeutic use , Kidney Diseases/drug therapy , Protective Agents/therapeutic use , Animals , Cadmium/pharmacokinetics , Catalase/metabolism , Catechols/pharmacology , Cell Adhesion Molecules/genetics , Cell Adhesion Molecules/metabolism , Cell Line , Cell Survival/drug effects , Environmental Pollutants/pharmacokinetics , Glucosides/pharmacology , Glutathione/metabolism , Glutathione Disulfide/metabolism , Glutathione Peroxidase/metabolism , Kidney/drug effects , Kidney/metabolism , Kidney/pathology , Kidney Diseases/chemically induced , Kidney Diseases/metabolism , Kidney Diseases/pathology , Lipid Peroxidation/drug effects , Male , Protective Agents/pharmacology , Rats, Sprague-Dawley , Reactive Oxygen Species/metabolism , Superoxide Dismutase/metabolismABSTRACT
We demonstrate highly efficient electocatalytic activities of single crystalline RuO(2) nanorods grown on carbon fiber (CF), i.e., RuO(2) nanorod-CF hybrid microelectrode, prepared by a simple thermal annealing process from the Ru(OH)(3) precursor at 300 °C. The general electrochemical activity of a RuO(2) nanorod-CF microelectrode represents faster electron transfer for the [Fe(CN)(6)](3-/4-) couple than that of the bare CF microelectrode which are confirmed from the cyclic voltammetry (CV) measurement. Also, the amperometric response for the H(2)O(2) oxidation is remarkably facilitated at the RuO(2) nanorod-CF microelectrode by not only the enlarged surface area but the high electrocatalytic activity of the RuO(2) nanorod material itself. Furthermore, a single microelectrode of RuO(2) nanorod-CF exhibits the superior tolerance to Cl(-) ion poisoning unlike Pt-based electrocatalysts, indicating the promising sensor candidate in physiological conditions.